3DHunt.co

Author: Thingiverse

  • Lego Battle Droid Leg – Replacement 3D Print Model

    Lego Battle Droid Leg – Replacement 3D Print Model

    Summary
    For all those who have lost or broken your battle droid leg(s). I give you a replacement design. This fits a standard Lego Battle Droid torso. You can also use it to start making your own version of Roger Freemaker.
    Made on the M3D micro with ABS-R
    Print Settings
    Printer:
    M3D Micro Rafts:
    Yes Supports:
    No Resolution:
    150 Notes:
    Works good with ABS-R

  • Articulated and Parted MWO Catapult 3D Print Model

    Articulated and Parted MWO Catapult 3D Print Model

    Summary
    i am bad at summary and english…
    Note 1) Smaller revoloute Joints that did’t given specific Pin Model use 1.75mm Fillaments as pin.
    Note 2) Revolute Axiess given 0.05mm toleance and other assmble joints given no tolerance in design so you will need some accuracy fit part together.
    Note 3) you may need glue to weld part together which it will need when weld smaller parts on body
    Note 4) Some joints and attach points may need put some a bit of tissue for comensate tolerance in order to keep tension on joints.
    Note 6) if you want change scale i recommand you load Introduction STL on your editer whatever you use and edit then extract one by one if possible
    Note 7) this modification work may completed but it will stay in ‘This Thing is a Work-In-Progress’ untill anyone proven this can be printed well in other printers especially Reprep which i afriad it may can not printed well with my supports.
    Print Settings
    Printer:
    Cubicon Style (3DP-210F) Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    i recommend 0.1mm Layers height Infill:
    10~15% Notes:
    you will need to be good at get accurate Dimension of work of your printer as put male and female part together in 0.05mm toleance or no toleance on attach points
    How I Designed This
    I liked Mech and ship angled nicely such as UNSC ship , Catapult Mech, Raven Mech and i also interest in developing and covert models into articulated one so i work on this as fun.

  • Vanishing Coin Accessory 3D Print Model

    Vanishing Coin Accessory 3D Print Model

    Summary
    This is an accessory for the Magic Makers Vanishing Coin Trick. This is a replacement for the plastic ring that comes with the set.
    The trick is cool. And can be bought here https://www.amazon.com/Magic-Makers-Vanishing-Coin-Ultimate/dp/B00TYP4QKC. However my plastic ring broke, making the trick worthless. I didn’t want to pay another $30 for a silly stepped plastic ring when I have a 3D printer, thus I give you a five cent replacement. Good as new or even better than the original!
    Print Settings
    Printer:
    M3D Micro Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    any

  • Eisenhower Dollar Coin Holder 3D Print Model

    Eisenhower Dollar Coin Holder 3D Print Model

    Summary
    Remix of Dollar Coin Holder, scaled for Eisenhower Dollar Coins

  • gears for decoration 3D Print Model

    gears for decoration 3D Print Model

    Summary
    Gears, what else?

  • Irrigation Hose Wall Mount 3D Print Model

    Irrigation Hose Wall Mount 3D Print Model

    Summary
    Wall mount for irrigation hoses with outer diameter of 6 mm. Includes 3 mm holes for mounting using screws, also it is possible to use double sided tape.
    Print Settings
    Printer:
    Vertex K8400 Rafts:
    No Supports:
    No Resolution:
    0.2mm Infill:
    50%

  • K40 Laser Panel for using an LCD with a Cohesion 3D board 3D Print Model

    K40 Laser Panel for using an LCD with a Cohesion 3D board 3D Print Model

    Summary
    This is version 1 of the panel, I will add the holes for mounting as soon as I get a chance. This was designed to use with the case linked below and has had everything moved to accommodate the stock opening on the K40 laser itself.
    https://www.thingiverse.com/thing:87250

  • Phone and Cable Holder for Samsung Charger 3D Print Model

    Phone and Cable Holder for Samsung Charger 3D Print Model

    Summary
    This is a small charging station that holds your phone and keeps the cables organized. There are a few samsung charging stations that hold your phones, but this one will keep the cable organized as well.
    When plugged into outlets that hold the charger tightly, the phone can be placed upright or vertically on the charging station, but when the charger droops in the outlet, the phone will have to be placed on it side so it doesnt bend anything. This is a work in progress because I’d like to angle the phone relative to the charger, so this wont be an issue.
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator Mini Rafts:
    Yes Supports:
    Yes Resolution:
    0.3 Infill:
    15% Notes:
    These are the print settings I used for this. I’m sure there are many others you can use and still print succesfully.

  • Spark cube 1.1xl RADDS extension board mount 3D Print Model

    Spark cube 1.1xl RADDS extension board mount 3D Print Model

    Summary
    Might be useful for the SparkLab community. It’s for RADDS w/extension board builds. Tape thickness is calibrated for 3M VHB, but I’m sure it would work with other two-sided tapes. You could always stretch the z if you needed…

  • 10mm wargaming building 3D Print Model

    10mm wargaming building 3D Print Model

    Summary
    I printed it in parts, movable roof lets you put figures inside. Pics later. Used for 10mm wargaming.
    Print Settings
    Printer Brand:
    Solidoodle Printer:
    Solidoodle 2 – Base Rafts:
    No Supports:
    No Resolution:
    .3

  • Cross pendent 3D Print Model

    Cross pendent 3D Print Model

    Summary
    This is my 12 year old son’s first 3D design. This is a cross pendent designed with a hole in the top to put a cord through.
    Print Settings
    Printer:
    Monoprice Select Mini V1 Rafts:
    No Supports:
    No Infill:
    20

  • Anet Autolevel sensor mount(V6 hotend + Bowden) 3D Print Model

    Anet Autolevel sensor mount(V6 hotend + Bowden) 3D Print Model

    Summary
    I originally printed the first one. I really like the design. The only problem is that the sensor sits too low to use the v6 hotend with a bowden extrusion setup. The highest you can raise it on the original, you were stil about 4mm away from the print surface.
    So I chopped it a bit to make it higher, and gave it some more adjustment room.
    I have not tested it. I haven’t had a chance to print it yet as the printer is not quite together yet.

  • OpenSCAD HD Stepper Motors and Gearbox mockups 3D Print Model

    OpenSCAD HD Stepper Motors and Gearbox mockups 3D Print Model

    Summary
    This is an OpenSCAD library for displaying high detail, visually accurate stepper motors, with or without gearbox, for use in mockups of larger assemblies (eg. a RepRap 3D printer, or other robots).
    There are Nema11 and Nema17 versions currently, but the script could probably be adapted for other sizes of stepper motors as well..
    This model is not intended to be 3D printed, but for visualizing in OpenSCAD, checking fit of assemblies, making pretty screenshots and animations, etc.
    Motor and gearbox internals are not modeled accurately(or at all!), their beauty is only skin deep.
    This script requires the Open Source BOLTS library by jreinhardt for the hex cap bolts.

  • Necron Cup 3D Print Model

    Necron Cup 3D Print Model

    Summary
    A simple dice cup to use with your Necrons. Or any other game and army if you just like the symbol.

  • Phoenix Credit (coin/token) 3D Print Model

    Phoenix Credit (coin/token) 3D Print Model

    Summary
    Just some fan art, of the Popular Tom Clancy game “The Division” made for cosplayers
    Please download print and enjoy your “bird bucks”
    How I Designed This

    Face

    Back

    Spine

  • Nameplate 3D Print Model

    Nameplate 3D Print Model

    Summary
    Another one asked from my kids – “Dad, can’t you print some Fireman-Nameplates. And as allways, sure…
    So here they are. Small plates, they can be easily clipped on any t-shirt. The DXF ist for the paperplate itself – in case you have an Lasercutter or something similar.
    Print Settings
    Printer:
    ZYYX 3D Printer Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    10% – 20 %

  • simple key chain calliper 3D Print Model

    simple key chain calliper 3D Print Model

    Summary
    This is a simple calliper. good and easy printable. Use ABS not PLA. PLA will not slide propperly.

  • Orc Skull 3D Print Model

    Orc Skull 3D Print Model

    Summary
    orc skull

  • Abbot SP art 3D Print Model

    Abbot SP art 3D Print Model

    Summary
    you can make the gun go up and down if you like. i use that for direct fire and indirect fire
    Print Settings
    Rafts:
    No Supports:
    Yes Resolution:
    3 Infill:
    up to you Notes:
    if you like the gun move you need a paper clip to go thru the turret. the place is a black line on the STL view

  • 28mm Barrel Cart 3D Print Model

    28mm Barrel Cart 3D Print Model

    Summary
    28mm Barrel Cart

  • GameBoy Advance Game Stand 3D Print Model

    GameBoy Advance Game Stand 3D Print Model

    Summary
    This is a GameBoy Advance stand which hold upto 14 GBA games.
    Print Settings
    Printer:
    Hictop i3 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.4mm Infill:
    N/A

  • “Ash”, or a close facsimile thereof 3D Print Model

    “Ash”, or a close facsimile thereof 3D Print Model

    Summary
    I don’t want to step on any toes, so he’s not a 100% faithful reproduction of Ash. But, he’s got a boomstick, a chainsaw for a hand, and prints ok at 50-55mm scale.
    I included the .blend and graphscad .scad saves if you want to remix it. The character is from makehuman, so composed of multiple meshes.
    The boomstick is done in SCAD then moved to blender for sculpting.
    The chainsaw was done in SCAD and brought over to blender for compositing with the other models.
    Print Settings
    Printer:
    Bender (RAMPs on a Monoprice Mini) Rafts:
    Doesn’t Matter Supports:
    Yes Resolution:
    0.13125 Infill:
    5% Notes:
    You can increase the infill if you like for a heavier figurine.

  • Tampa do cable chain do eixo y 3D Print Model

    Tampa do cable chain do eixo y 3D Print Model

    Summary
    Peça para enfeitar o cable chain do eixo y. ela fica sobre o conector.

  • Vornado Fan guard clip 3D Print Model

    Vornado Fan guard clip 3D Print Model

    Summary
    Vornado fan guard clips. I designed these to hold the fan guard on my Vornado fan in place. Drill a hole through the top and use a short screw.

  • FLSUN Cube X carriage restyling 3D Print Model

    FLSUN Cube X carriage restyling 3D Print Model

    Summary
    My X carriage broken and i created restyled one. Some things bit simplified, i tried to make it more reliable, belt mount included. If hotend radiator doesn’t fit to it’s mount, just hot up radiator with boiling water and put to mount – mount will take your radiator shape.
    FreeCAD source file included as usual 🙂

  • Floss Rear Antenna 3D Print Model

    Floss Rear Antenna 3D Print Model

    Summary
    a rear antenna mount for 3mm tubes on 5mm standoff

  • Scalpel case 3D Print Model

    Scalpel case 3D Print Model

    Summary
    This is the scalpel carrying and storage case we’ve been working on for some time now. The idea is to create a case able to hold one, three or five scalpels safely. It must be safe and hold the scalpels securely enough to put in a bag or pocket without it opening or breaking.
    We tested this with different scalpels and blades. It will fit most scalpels, Swann-Morton no 3, and a bunch of unbranded ones. A version for Swann-Morton no 4 or for other types will be uploaded upon request.
    Be sure your print has good layer adhesion and is strong enough for the forces it has to withstand before tossing it in a bag or somewhere it might hurt someone if broken. Scalpels are designed to cut flesh, so be careful.
    This is the result of our scalpel tray study, http://www.thingiverse.com/thing:2099632
    We are already deep into development of version two, which is possibly going to be thing no: 2380454.
    This thing is designed to be printed with both parts standing up.

  • Articulacion Pistola de Pegamento (Glue Gun Trigger Hinge) 3D Print Model

    Articulacion Pistola de Pegamento (Glue Gun Trigger Hinge) 3D Print Model

    Summary
    Articulacion del gatillo de la Pistola de Adhesivo.

  • Leopard 1 MK1 3D Print Model

    Leopard 1 MK1 3D Print Model

    Summary
    glue the hull back on after printing.
    Print Settings
    Rafts:
    No Supports:
    Yes Resolution:
    Hull 3 Turret 2 Infill:
    Hull no turret your call Notes:
    the turret do not need fill i think it looks better if you do.

  • Cup holder mount for inductive charger 3D Print Model

    Cup holder mount for inductive charger 3D Print Model

    Summary
    I wanted a convenient way to hold my phone and charge it without fumbling for cables every time I got in or out of my vehicle. This is designed to fit a 2014 F-250 cup-holder with the rubber insert removed (camelback water-bottle sized). The phone clamp portion printed very easily, but the cup section required quite a bit of tweaking with the supports to get it right. Initially printed upside down, but the final version was right-side up. Printed in ASA on a Taz 5, 255 c extrusion temp, 105 c bed temp.

  • Testors Paint & Brush Holder 3D Print Model

    Testors Paint & Brush Holder 3D Print Model

    Summary
    Remix of https://www.thingiverse.com/thing:2414893
    Added paint brush holders to this Testors paint bottle holder.

  • Star Citizen Anvil F7C-S Hornet Ghost 3D Print Model

    Star Citizen Anvil F7C-S Hornet Ghost 3D Print Model

    Summary
    Another Star Citizen holoviewer cleanup of a ship I like.
    I suggest printing the guns at 100% infill just for a bit of strength as they are small.

  • CLUB DES CINGLÉS DU MONT-VENTOUX 3D Print Model

    CLUB DES CINGLÉS DU MONT-VENTOUX 3D Print Model

    Summary
    Created a plaque to honour the completion of the CLUB DES CINGLÉS DU MONT-VENTOUX. Some crazy person thinks that riding up a mountain 3 times is fun.
    Check out the Mt. Ventoux Club page here -> http://www.clubcinglesventoux.org/en/
    Used the GPX data and a script, referenced via. the remix, to create the route.
    I simply added a backing and text.
    Prints lovely and the receiver was very happy with it.
    Print Settings
    Printer Brand:
    Wanhao Printer:
    Wanhao Duplicator i3 V2 Rafts:
    No Supports:
    No Resolution:
    0.1 Infill:
    25

  • KFC32F3 mount 3D Print Model

    KFC32F3 mount 3D Print Model

    Summary
    Simple mount for KFC32F3 autopilot. Especially for those with limited space in the fuselage. Plate_2 has little tab for easy pulling out.
    -insert spring part inside the base part
    -glue the base inside fuselage
    -screw the autopilot to plate or plate_2 part using M3 screws and spacers
    -connect necessary cables
    -slide plate inside base
    Proste mocowanie dla autopilota KFC32F3. Zaprojektowane z myślą o tych z niewielką ilością miejsca w kadłubie. Płytka 2 jest z niewielkim uchwytem ułatwiającym powtórne wyciąganie.
    -wsuń sprężynę (spring) w podstawę (base)
    -wklej podstawę w kadłub
    -przykęć autopilota do płytki (plate lub plate_2)
    -podłącz niezbędne kable
    -wsuń płytkę w podstawę
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Steel Rafts:
    No Supports:
    No Resolution:
    0,2 Infill:
    35% Notes:
    No supports/rafts required.
    Bez podpór/podstaw.

  • Multimeter table holder 3D Print Model

    Multimeter table holder 3D Print Model

    Summary
    Multimeter holder to be set on the table edge, so as to work with it saving some room on the table 🙂

  • HTC_Vive_controler_stand_inlet_vive 3D Print Model

    HTC_Vive_controler_stand_inlet_vive 3D Print Model

    Summary
    This is a plug holder for the original USB cable of the VIVE controller. It fits into HTC Vive controllers stand by Animazu http://www.thingiverse.com/thing:1829212
    It snaps in and then hold in place by pushing a little pice of paper in the resulting gap (as shown in the picture).
    Print Settings
    Printer:
    TEVO Little Monster Rafts:
    No Supports:
    Yes Resolution:
    0.2 mm Infill:
    yes Notes:
    Designed without any clearance, so after printing sand it until it fits.

  • RJ45 Ethernet 5-hole Cable Holder 3D Print Model

    RJ45 Ethernet 5-hole Cable Holder 3D Print Model

    Summary
    Very simple 5-hole Ethernet cable organizer. 5 holes to accommodate WLAN + 4 other cables.

  • 1 gallon paint can metal melting furnace interior mold 3D Print Model

    1 gallon paint can metal melting furnace interior mold 3D Print Model

    Summary
    A mold for the internal chamber of a paint can furnace using furnace cement. The nozzle of a bernzomatic ts8000 map/propane gas torch goes in through the side with a 10 degree slant towards the top to help disperse the heat from the bottom to the top of the furnace in a vortex. Place part 1 in the bottom center of the can and hot glue it in. Then fill the bottom of the can evenly with 1 1/2 inch or 38mm and let it set. Then put the mold inside of the can centered with the stem against the inside wall of the can where the entrance hole for the torch will be. Fill the rest of the void between the mold and the can with furnace cement and let it cure. I used sand in the center of the cavity of the mold to hold it in place. Cut the entrance hole for the torch in the side of the can and use the torch to burn out the mold. Part 1 is a drain hole in case of crucible failure.

  • Pocket Door Handle 3D Print Model

    Pocket Door Handle 3D Print Model

    Summary
    Pocket door handle insert. Print two – one for each side. Can use small piece of plastic (I used a raft from the project) between the two halves to clock out sound and light.

  • CR-10 Leveling knob attachment 3D Print Model

    CR-10 Leveling knob attachment 3D Print Model

    Summary
    Hi everyone, I just made leveling knob attachment for CR-10 which name is LOTUS. Because I didn’t like the old thing at Thingiverse. It looks like some kind of wooden wheels of 15C.
    Anyway, I don’t own CR-10 yet. lol
    How I Designed This

  • Megaminx 3D Print Model

    Megaminx 3D Print Model

    Summary
    When I started printing the Reuleauxminx that I posted last week, I began running into some issues that I hadn’t foreseen. To make the necessary tweaks, I decided to get a normal megaminx working first (simpler external piece geometries = faster prototyping).
    Here’s the result, a rough but functional megaminx. No center caps, so you’ll have to deal with exposed screws unless you remix the design, and the clearances are a bit iffy, so be prepared to sand accordingly. I’ll get around to a higher quality version of this later, but I really want a physical reuleauxminx in my hands as soon as possible, so I’m moving on to that.

  • Cello Endpin Stop 3D Print Model

    Cello Endpin Stop 3D Print Model

    Summary
    Simple endpin stop for cello. Needs to have rubber/silicone pads placed to keep from slipping.

  • Anet a6 prusa i3 led plate holder 3D Print Model

    Anet a6 prusa i3 led plate holder 3D Print Model

    Summary
    I designed this for my anet a6 prusa i3 3d printer. Every time I was printing I needed a flashlight to see in detail what the printer was doing. At first I wanted to add lights to the frame but since the extrude is moving there was never a perfect spot without shadow. So I measured the aluminum extruder base and made a 3d model of it. Then designed something so it would fit the led plate I had. I think I found the same Led in the link below but i am not sure. For the costs it is worth trying. And if not you have to change the clamping part in acad yourself to make it fit to the different measurements of the new led plate. The file is made for a led plate of 47X20 mm.
    The power leads are put together with the rest of the extruder cables and go to a switch. power is taken from the powersupply. The led plate will consume just minimal power so no worries if the powersupply can feed the led’s.
    order the led plate here:
    https://nl.aliexpress.com/item/1PCS-Super-Bright-T10-18-LED-1210-SMD-3528-Car-Auto-Interior-Reading-Door-Light-Panel/32800244364.html?spm=2114.010208.3.68.267Quc&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_10084_10083_10080_10304_10082_10081_10177_10110_10136_10137_519_10111_10060_10112_10155_10113_10114_437_10154_10056_10055_10054_10182_10059_303_100031_10099_10078_10079_10103_10073_10102_10052_10053_10142_10107_142_10050_10051,searchweb201603_2,ppcSwitch_7&btsid=f5f04a42-0ce2-4926-bc45-6bfa0c134434&algo_expid=857e0932-25b8-43dd-b230-5caa9d3c3864-9&algo_pvid=857e0932-25b8-43dd-b230-5caa9d3c3864

  • Instrument cover for Raymarine ST60 series 3D Print Model

    Instrument cover for Raymarine ST60 series 3D Print Model

    Summary
    This is a 3D printable replacement cover for Raymarine ST60 boat instruments. It should be printed using UV resistant material.
    You could add your boat name to the cover. I’ve had good results with recessed lettering with a depth of about 0.3 mm.
    This is a work in progress. Please leave a comment if you’ve found this design useful (or not).

  • Gas mask prop filter 3D Print Model

    Gas mask prop filter 3D Print Model

    Summary
    Found no gas mask filters for 3D printing anywhere so I made my own.
    Needed a prop filter for a short movie and I didn’t want to waste the real filter I own.
    Print Settings
    Printer:
    CoLiDo DIY Rafts:
    Doesn’t Matter Supports:
    Yes Resolution:
    0,3 mm Infill:
    0%
    Post-Printing

    You can tell that the print itself didn’t turn out too good on my side. My printer is quite cheap, and during the printing of the two parts I had to buy a new filament (gray), which appears to be worse in quality.
    During printing, the sides cracked/separated, and I used tape to keep it from breaking any further.
    Later on I glued on everything that looked structurally weak. Looks ugly, but I intend to paint the whole thing later anyways.
    How I Designed This
    Made in Autodesk Inventor using coolOrange threadModeler for the top screw (https://apps.autodesk.com/INVNTOR/en/Detail/Index?id=2540506896683021779)

  • Vacuum cleaner converter 3D Print Model

    Vacuum cleaner converter 3D Print Model

    Summary
    Vacuum cleaner converter

  • Magnet Tintin et Milou 3D Print Model

    Magnet Tintin et Milou 3D Print Model

    Summary
    Best hero from belgium comics

  • 1-100 LVT-4 20mm polsten cannon- 3D Print Model

    1-100 LVT-4 20mm polsten cannon- 3D Print Model

    Summary
    I added a little more detail to the Polsten Cannon for the LVT in the 1_100 Tanks by m_bergman. It can be scaled using the % size chart.
    Print Settings
    Printer Brand:
    Formlabs Printer:
    Formlabs Form 2 Rafts:
    No Supports:
    Yes

  • Filament Holder 3D Print Model

    Filament Holder 3D Print Model

    Summary
    This can hold 4 strands of filament, for easier access to the ends when changing colours – or print 2 (one for each side) to hold 8 colours. Makes it a bit easier to find those ends when changing colours, especially if spools are on a rolling mechanism.
    Designed using Design Spark Mechanical (Available for free here: https://www.rs-online.com/designspark/mechanical-software). Printed in PLA with Anet A8, no supports are needed.

  • Swift Mini 3D Print Model

    Swift Mini 3D Print Model

    Summary
    TPU Mount

  • medeco xt key blank 3D Print Model

    medeco xt key blank 3D Print Model

    Summary
    This is an enclosure built for the medeco XT line, the enclosure is intended to have 3 pogo pins inserted at the to and connected to an Arduino compatible.

  • Number 1 Son Trophy 3D Print Model

    Number 1 Son Trophy 3D Print Model

    Summary
    Was asked to re-create this as a 3d printed object based on what someone had created out of wood. No1Son_Parts is the same object, but separated from the base to make it easier to print

  • Mars Cybernetics Advanced Systems Tactical Eye patch 3D Print Model

    Mars Cybernetics Advanced Systems Tactical Eye patch 3D Print Model

    Summary
    Mars Cybernetics Advanced Systems Tactical Eye patch
    elastic strips to be used to connect parts together

  • One Inch Pipe Drill Guide 3D Print Model

    One Inch Pipe Drill Guide 3D Print Model

    Summary
    Designed to interlock with itself and the 1 inch pipe. Print 2 of these out to drill straight through a pipe and not have the drill bit offset in the process. Designed holes are a #40 size. Recommend up sizing these and installing a metallic bushing so as to not melt the plastic of the part during drill operation.

  • #1 Son 3D Print Model

    #1 Son 3D Print Model

    Summary
    A request

  • Fast Bridge Test 3D Print Model

    Summary
    A quick test of the bridging ability of your 3d Printer.

  • modelo de Gustavo Ramirez 3D Print Model

    modelo de Gustavo Ramirez 3D Print Model

    Summary
    Objeto diseñado por Gustavo Ramirez para la materia Diseño, Producción y Serialización. Dirección del proyecto Profesor Claudio Gabriel Escobar, OTAV Nivel 3 Cátedra Cáceres

  • STAR WARS Land Speeder 3D Print Model

    STAR WARS Land Speeder 3D Print Model

    Summary
    STAR WARS Land Speeder

  • Stepper mount for 2020 rail flat print 3D Print Model

    Stepper mount for 2020 rail flat print 3D Print Model

    Summary
    customized to print it on flat surface without supports.
    Inspired by a previous make, unshared, https://www.thingiverse.com/make:277882

  • ATT Modem wall mount 3D Print Model

    ATT Modem wall mount 3D Print Model

    Summary
    Mount to your wall and insert your AT&T Cable Modem.
    A friend moved to a new home and wanted a way to mount his modem to the wall. This is what we came up with and it’s currently in use at his home. Honeycomb pattern was done just for fun.

  • Chain Necklace 3D Print Model

    Chain Necklace 3D Print Model

    Summary
    26 inch chain printable without supports. Designed for a 200×200 build plate, might be able to scale down for smaller.

  • Diamond Hotend Mount Ring 3D Print Model

    Diamond Hotend Mount Ring 3D Print Model

    Summary
    a modular ring to hold the diamond hotend. has holes for the fan and a slot for the wires. might be best to print it upside down. to be used with my modular ring shield

  • Stackable Box V4 full / half height with split variants + trays with various splits 3D Print Model

    Stackable Box V4 full / half height with split variants + trays with various splits 3D Print Model

    Summary
    A set of Stackable BOX components I found most useful. Everything is redrawn from scratch.
    Included STLs:
    regular box
    regular box with divider
    half height box, properly edited (not just a scaled down version of the regular size
    half height box with divider
    tray
    tray divided to half
    tray divided into 4
    tray divided into 6
    One box fits exactly 4 trays, I tend to use half height boxes with 2 trays for really small parts.
    Everything is printable without supports, 0.2 – 0.3 mm layer height is recommended, with 0.4 mm nozzle.
    I opted to redraw everything as the original design had issues I realised when I imported the STL and tried to edit it – it had inaccuracies, non perfectly parallel faces, and minor glitches that made much more difficult to add the dividers that I needed than it should be. It’s still 100% compatible with the original one, and stacks nicely with those as well.
    Enjoy!
    How I Designed This

  • Stringing Test 3D Print Model

    Stringing Test 3D Print Model

    Summary
    this is just a simple stringing test. I used this thing to calibrate my retraction util i had no strings between the two collums. As always , CAD model ,STP ..etc in the download section. Fell free to improve it
    Print Settings
    Printer:
    Anet A8 Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    your choice Notes:
    tune your printers retraction / printing temperature / etc until you have no strings

  • Crash Bandicoot Planters 3D Print Model

    Crash Bandicoot Planters 3D Print Model

    Summary
    I would love to keep sharing my projects with all of you. If you enjoy with my designs, I invite you to become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.
    Patreon: http://www.patreon.com/flowalistik
    Donations: http://www.paypal.me/flowalistik
    Crash Bandicoot TNT and Nitro crate planters.
    Both planters are available in single and dual extrusion version.
    In this video, I explain the design process and more: https://youtu.be/gCnFzrkgXR0
    The filament used for this design is Innofil3D PLA (Gold and White PLA). It can be purchased here: https://www.innofil3d.com
    I’d like to thank all my supporters and patrons, with your help I’ve been able to create this project. The Patreon MVPs for this project are 3D Maker Noob, 3D Printing Stuff, MatterHackers, Filaments.directory, Dattas Moonchaser, MidnightGiant, Andrew Howat, Didier Klein and David Kessler!

  • Bart Simpson DYOR e5fa829095142d16c1d5df770992d298 3D Print Model

    Bart Simpson DYOR e5fa829095142d16c1d5df770992d298 3D Print Model

    Summary
    Este es un diseño para crear tu propio robot DYOR. El diseño está basado en el personaje de los Simpson: Bart Simpson.

    References
    Curso MOOC EdX: https://www.edx.org/course/disena-fabrica-y-programa-tu-propio-upvalenciax-dyor101x
    Portal de formación robot DYOR: http://dyor.roboticafacil.es
    Blog robótica de la UPV: http://robotica.webs.upv.es
    Twitter (@roboticaUPV): https://twitter.com/roboticaUPV
    Facebook (robótica UPV): https://www.facebook.com/roboticaUPV

  • Volcano coin holder 3D Print Model

    Volcano coin holder 3D Print Model

    Summary
    didnt print yet

  • Action Jazza – tribute sculpture 3D Print Model

    Action Jazza – tribute sculpture 3D Print Model

    Summary
    The famous australian illustrator/YouTuber, Jazza, posted a video in which he created 3D self-portrait with a 3D pen.https://youtu.be/a0seK8fAWnY
    I made my own version of that statue as a 3D printable model,
    but unlike Jazza’s version, mine actually stands up. 😛
    Print Settings
    Infill:
    Solid Notes:
    The support material can get tricky on this one.
    If you have dissolvable support material with a dual-extruder printer, then you’re in luck. Just use Jazza_033_No_Supports.stl
    I had use Jazza_33_big_supports.stl , in which I sculpted my own supports AND turned support material on. The custom supports constrain the places that point down, like the fingers. The auto-generated support material holds the big parts, like the backs of his shirt and head. Layer height should be relatively low to preserve detail. I chose 0.15mm . Afterwards, I used a dremel with a carving bit to remove the thick columns and produce/reveal the shapes of the the tips of the hair, the back of the shoes, and the back of the fingers, and the base of the pencil. The eraser fits on separately. You may need glue to hold it in place. I used SOLID INFILL so that when I carved into the columns, there were no hollow parts exposed.
    Post-Printing
    I used standard acrylic paint to produce the colors. I recommend painting one color at a time, allowing it to dry in between. Be careful where you put your hands as you turn the piece! It is easy to track paint from one place to another with gloves on accident. You can find more detailed an meticulous guides to model painting elsewhere online.

  • Micro SD to SD extension adapter for 2020 extrusion 3D Print Model

    Micro SD to SD extension adapter for 2020 extrusion 3D Print Model

    Summary
    This is a redesign of https://www.thingiverse.com/thing:1802502 adapted for 2020 extrusions.
    Needs 1 M5 x 10 button head socket head cap screw and a hammer nut or a Square if you are assembling your AM8 (Anet Metal A8)

  • Deathtrooper E-11D Blaster 3D Print Model

    Deathtrooper E-11D Blaster 3D Print Model

    Summary
    Some of the major parts for the E-11D Blaster used by the Deathtroopers from Rogue One. Not screen accurate, or perfect, but its a good starting place.

  • Round Tank Factory 3D Print Model

    Round Tank Factory 3D Print Model

    Summary
    Building/terrain suitable for use in 6mm science fiction gaming (Epic 40K and others.)
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator Mini Rafts:
    Yes Supports:
    Yes

  • Shark Week Keychain 3D Print Model

    Shark Week Keychain 3D Print Model

    Summary
    This is a cool Shark Week keychain I designed for all you shark week lovers out there! Enjoy!

  • Shower knob ring 3D Print Model

    Shower knob ring 3D Print Model

    Summary
    At home we have a shower which has two knobs, one for the temperature and another for the water flow. Both knobs have a button which has to be pressed to fully turn the knob, with the temperature knob this is kinda obvious because you don’t accidentally want to twist the knob to the highest temperature, but I always want the water flow to be on the highest setting so I was annoyed by the button I have to press every time I twist the knob, so I made a ring which holds down the button.
    This ring is for an elliptical knob with a width of 40mm and a height of 45mm
    Print Settings
    Printer Brand:
    Wanhao Printer:
    Wanhao Duplicator i3 Plus Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.2 Infill:
    20%

  • Multi-Color Light Bulb Switch Cover 3D Print Model

    Multi-Color Light Bulb Switch Cover 3D Print Model

    Summary
    Get me an extruder and filament, I’ve just thought of something…!
    Let’s replace our light switch covers with this Multi-Color Light Bulb Switch Cover!
    Great idea, right?
    Print Settings
    Supports:
    No Infill:
    12% Notes:
    Shells: 2 shells, 3 on the top, 2 on the bottom.
    Do not scale. CAD files available upon request.

  • Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Linear bearing compatible with sme8op but with 623 bearings 3D Print Model

    Summary
    This is the replacement for my prusa i3 linear bearings. The ones I had originally were verry bad and loose. Now it works flawlessly.
    I attached the bearings using m3 screws, but it should be possible to mount it with original m4 screws (but I am not sure, please be warned).

  • Low Poly Cooker Dog 3D Print Model

    Low Poly Cooker Dog 3D Print Model

    Summary
    Low poly Cooker!

  • wall & floor (bathroom) 3D Print Model

    wall & floor (bathroom) 3D Print Model

    Summary
    no support
    I will upload every single bathroom stl files.. Try to make it… Thank you.
    Post-Printing

  • Exchange-A-Blade Utility Knife PLA Optimization 3D Print Model

    Exchange-A-Blade Utility Knife PLA Optimization 3D Print Model

    Summary
    This is a remix of the EAB utility blade.
    Motivation:
    I found that the original EAB when printed in PLA would have the locking mechanism snap off very easily. There was also no way to flush mount the screw and retaining nut.
    Overview of changes:
    Re-designed the locking mechanism for PLA. (Moved it over and reinforced the piece)
    Modified the tolerances around the blade swivel for a 0.4mm hotend.
    Reduced size of pocket clip.
    Added inset holes for M3 screw and M3 nut.
    Chamfered the blade cover.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.2 Infill:
    30 Notes:
    Printing PLA at 0.2 resolution I had some difficulty with tolerances. This lead to the blade not moving smoothly. I would suggest 0.1 resolution, but it takes longer. At 0.1 resolution in Cura, it would have taken somewhere closer to 3-4 hours. At 0.2 resolution, it took 2:25 hours.
    Post-Printing
    Same as pre-remixed file.

  • Little Monster Tower Extruder Mount 3D Print Model

    Little Monster Tower Extruder Mount 3D Print Model

    Summary
    This mont allows you to move the extruder from the hanging belts to a tower. Its best to attach this mount before attaching the top aluminum plate.

  • RT Assault Gun (Vindicator class) 3D Print Model

    RT Assault Gun (Vindicator class) 3D Print Model

    Summary
    It was a time of great Civil War
    …in miniature.
    This is a 6mm assault gun variant of the futuristic armored troop transport.
    It has had a few of the fixes that are coming for the troop transport, tank and command variants. There is a piece to help the roadwheels and tracks to stay together during removal of supports or from the printbed. A few small details have been moved slightly to make a better placement and complete model.
    Print Settings
    Printer:
    M3D Micro Rafts:
    No Supports:
    Yes Resolution:
    150 micron (High Resolution) Infill:
    Hollow Thick Walls

  • VW R keyring 3D Print Model

    VW R keyring 3D Print Model

    Summary
    VW R Keyring

  • AZSMZ 12864 LCD case 3D Print Model

    AZSMZ 12864 LCD case 3D Print Model

    Summary
    case for the lcd “AZSMZ 12864”:
    -funcional reset button
    -support to 2020 or 3030 profile
    -case rotate

  • Drobo 5N Power Brick Mount 3D Print Model

    Drobo 5N Power Brick Mount 3D Print Model

    Summary
    A quick Remix of Ariehh’s powerbrick mount for the Monoprice Select Mini (https://www.thingiverse.com/thing:1799818) adjusted in Tinkercad for the Drobo 5N.
    Print Settings
    Printer:
    Monoproce Select Mini V1 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.15 Infill:
    20%

  • MendelMax 2.0 Front Facing Fan Guard 3D Print Model

    MendelMax 2.0 Front Facing Fan Guard 3D Print Model

    Summary
    MendelMax 2.0 fan duct for my e3d and bltouch combo.

  • Turbo Everdrive Shell (updated for V2) 3D Print Model

    Turbo Everdrive Shell (updated for V2) 3D Print Model

    Summary
    This is based upon the excellent Turbo Everdrive Shell by DogP. I’ve updated this to work on my v2.1 (I expect it’ll work on other V2s as well, and would love for people to tell me what versions it works on) and made a few other changes.
    Changes from original ‘no text label’ version:
    removed/rearranged some of the support structure under the surface of the shell to fit the V2
    added some more side wall structure where it was safe to do so to make up for the other change
    slightly widened the hole near the region switch
    relocated the window for the LED to match V2’s placement (I eyeballed it and lucked out)
    shortened the outer perimeter lip on the corner near the micro SD slot so that this is compatible with the Turbo Duo and PC Engine Duo models (previously you had to snip that part off)
    attempted to add a bit of ‘flex’ to the reset button cover – not sure if successful
    I’m sure there’s room for further improvement; I’ll either upload a new version of this remix here or I might make a whole new one in another program.

  • Test Triangle 100mm Calibration 3D Print Model

    Test Triangle 100mm Calibration 3D Print Model

    Summary
    Test triangle for X-Y-Z square and circles.

  • RV Camper Cabinet Latch Striker 3D Print Model

    RV Camper Cabinet Latch Striker 3D Print Model

    Summary
    The cabinet latches in my camper have been systematically breaking one by one. Can’t buy just the striker/catch plate, have to buy a completely new latch. So I used my new 3d printer to replicate them. They work perfect!!
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    .1 Infill:
    100

  • Eagle vs Cobra 3D Print Model

    Eagle vs Cobra 3D Print Model

    Summary
    it is a big volume model , over 100MB
    you need a big 3d printer to do it to show good details
    I printed one, height is 150mm, not very good
    with our GT PLA, shiny ,Eagle wings shiny as the photo show.

  • DJI Mavic Pro Simple Battery Clip (With Charge Indicators) 3D Print Model

    DJI Mavic Pro Simple Battery Clip (With Charge Indicators) 3D Print Model

    Summary
    A slight amendment to my previous design https://www.thingiverse.com/thing:2398749 this version includes a battery icon on the bbase of the aprt. This way you can use one to mark fully charges vs discharged batteries. Makes it easy to tell at a glance which are ready to go and which need charging. I print the charged ones in green and the discharged ones in red!
    A very simple little battery clip to cover the fairly exposed battery contacts on the DJI Mavic Pro’s Battery.
    The clip is JUST big enough to fit over the contacts and the first time may take some pressure and trial and error to get it to go on, after this it should be a very snug fit.
    I keep a few spares in my bag as these are friction fit, eventually they’re going to become loose, so I always have a spare.
    I have included the STL and SKP file in case you wish to make any changes, but the design works well for me/my printer.

  • Squeeze clip for filament spool spindle / axle 3D Print Model

    Squeeze clip for filament spool spindle / axle 3D Print Model

    Summary
    For my Anet A8 I wanted a quick release alternative to the supplied M8 nuts, so I designed this squeeze clip. To use just squeeze the arms together slightly to release the grip on the rod and slide off. They won’t grip as well as a nut with lock nut, but it works fine to hold the spindle in place.
    I made 2 sizes one for the stock M8 threaded rod with an inside diameter of 7mm and a smaller one for a 6.4mm guide rod I salvaged for a scanner, used for a different spool stand.
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.2mm Notes:
    I used a wide skirt to help with bed adhesion, My printer isn’t keen on small parts and I lose accuracy without the skirt. Your printer may vary.
    The needed supports are all built in and will snap off. I print the clips with 4 lines on the walls / shells hence the 0% infill. I tried printing with thinner walls and 20% infill, but the clips were prone to snapping.
    Post-Printing
    Trim any skirt and stringing. The support in the gap between the rings that allows the clip to flex, will break free the first time the clip arms are squeezed.
    There may be a small amount of support material that needs freeing up from the gap. I used tweezers and a craft knife.
    How I Designed This
    Designed with Fusion 360

  • Cover Fan 40×40 V-Slot Style 3D Print Model

    Cover Fan 40×40 V-Slot Style 3D Print Model

    Summary
    This is a 40×40 fan cover, with the V-Slot style.
    Not yet done, photos soon.
    The files are in Skp format, for its modification and scale and STL format for your slicer.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    indiferent
    Post-Printing
    Not yet done
    How I Designed This
    Design it as I’m building printer with V-Slot 20×20

    Standards

    NGSS

    Overview and Background
    Fan Cover 40×40
    This is a 40×40 fan cover, with the V-Slot style.
    Lesson Plan and Activity
    The intention is to print without supports and with a layer of 0.2, its thickness is of 2 mm
    Materials Needed
    PLA o ABS

  • D6 WANHAO DUPLICATOR – GANTRY ROD ALIGNMENT TOOLS 3D Print Model

    D6 WANHAO DUPLICATOR – GANTRY ROD ALIGNMENT TOOLS 3D Print Model

    Summary
    Haven’t tested yet but I am excited to find out how well they will work.

  • Greg´s Extruder 9:47 3D Print Model

    Greg´s Extruder 9:47 3D Print Model

    Summary
    Well this is a remix of https://www.thingiverse.com/thing:961630 extruder, with very little changes to satisfy my needs. One of that is 9:47 gears ratio that in my case give me a 24mm3/s filament flow with 1.75mm filament. This design use:
    3 – 608 bearing
    1 – M8 50mm Hobbed Bolt with hob centered at 23.5mm (this can be changed with washers to your needs).
    1 – M8 Self Locking Nut
    1 – Nema 17 Motor
    2 – M4 Allen Bolt 54mm long
    2 – M4 Hex Bolt
    2 – M4 Washer (to hold pressure springs)
    2 – Extruder Pressure Springs
    1 – M3 shaft to hold idler. A m3 bolt with nut can be used.

  • Trump Pillar 3D Print Model

    Trump Pillar 3D Print Model

    Summary
    A quick and easy print of Donald Trump’s silhouette. Can you see it? 🙂