Summary
simple box for motor controller.
https://www.amazon.it/gp/product/B0116R4FMY/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Extended Rafts:
No Supports:
No Resolution:
0.2 Infill:
15%
Author: Thingiverse
-
Box for controller motor 3D Print Model
-
Venezuela 3D Print Model
Summary
Logo Venezuela Geometric (logo geometrico de venezuela para ser configurado en distintas escalas)Standards
NGSS
Overview and Background
Lesson Plan and Activity
Materials Needed
Tiansee
filamento bastante bueno -
G-Bustr Logo (version 1) for Single Extruder 3D Print Model
Summary
This is an improved version from the previous: https://www.thingiverse.com/thing:2642466
To completely get rid of the sharp edge at the left hand of the lower ghost body part, make sure all the printed support residuals are cleaned.
Happy Printing! -
iPhone X and Apple Watch Wireless Charging Stand 3D Print Model
Summary
Vertical charging stand I designed in Fusion 360 to fit the Mophie QI Wireless charger and the Apple watch charger. Shown in the picture is an iPhone X and an Apple Watch charging at the same time. The iPhone X is encased in a Spigen Ultra Hybrid Case. The Mophie QI charger should also work with the iPhone 8/8 Plus but I haven’t personally tested them with my stand.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
0.3 Infill:
15% Notes:
Fast Honeycomb Infill
Printed at 75 mm/s
Extruder Nozzle 0.4mm
Total Print Time ~ 5hrs -
Carbon Fiber Y-Axis tray Chain Anchor & Lock 3D Print Model
Summary
This is a cable chain anchor and mount for a cable chain that fits the Carbon Fiber Y-Axis tray. (https://www.amazon.com/gp/product/B071LTS8W8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B071LTS8W8&linkCode=as2&tag=communityhost-20&linkId=bed5896d95b8d2ced89cca68414f32f9)
The CF tray zip tie slot is about 3mm further in than the stock aluminum tray zip-tie slot, so all of the cable chain anchors out there won’t work. Additionally, if you’ve installed the removable build plate by billyd (https://www.thingiverse.com/thing:1021403) and used the aluminum carriage upgrade (https://www.amazon.com/gp/product/B0192K4N6K/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0192K4N6K&linkCode=as2&tag=communityhost-20&linkId=1e61bce087154c48393fc54d8e997803), the aluminum carriage is too close to the CF tray to allow a standard mount in there anyway.
So this mount is inverted (screws on the bottom, instead of the top), and thinned enough to allow clearance for bed-leveling of the tray.
It’s pretty straightforward on install, just upside down from a normal anchor for a cable chain.
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Rafts:
No Supports:
No Resolution:
.25 Infill:
20% -
2006 volvo v50 no roof rail caps v3.3 3D Print Model
Summary
I searched everywhere for factory or third party made but none (or im searching at the wrong places) so instead i made my own and share with you. Please feel free to donate for my hard work.
This is cover/caps trim for the holes with snap on design after removal of the roof rails on the 2006 Volvo v50. May need additional “body” work like applying bondo, primer and paint to match the color of the car. A notch has been added for easier removal with a flathead screw driver.
Newer version is coming as i learn more on how to manipulate the 3D maker program.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk1 Rafts:
No Supports:
No Resolution:
0.2 Infill:
min 25% -
Army Board Game 3D Print Model
Summary
The game is played with 36 pieces each on a 9×10 square board. Each piece has a numeric value, which is hidden from the opponent and only revealed when an attacking piece moves onto a square occupied by an opponent’s piece. In most cases, the piece with the highest value wins and the losing piece is removed from the board. -
Starfinder Society Badge 3D Print Model
Summary
Starfinder Society badge/emblem. Designed in Fusion 360 and printed on my Raise3D N2 for use in my gaming group. -
Apple iPhone X dock for IKEA RÄLLEN wireless charger 3D Print Model
Summary
[ REMARK: PICTURES ARE BEFORE POST-PRODUCTION ]
I had picked up my iPhone X (I was 2nd in line on friday morning, yay!). I bought the IKEA RÄLLEN wireless charger for €14,95 as it was by far the cheapest, but for both next to my bed and on my desk I wanted to be able to put my iPhone up in a dock, instead of laying it flat on the charger. So, I figured, why not make one myself?
It has been designed to be stable and solid, but be rather quickly printable and save some material. I printed it both in PLA and wood (I love the look / feel / finish) and both turned out great. It has too been designed specifically so the charger is located in the center of the iPhone. That way, even with a case like my Apple silicone case on it, it has no problem connecting and charging. I didn’t think it would be a problem until the charger ended up being too low in the prototype, which on the other end should quite well work for the smaller iPhone 8 (I’ll upload that one later).
My next design will be a separate Apple Watch dock that can be connected to this one, forming a modular solution and leaving the choice for either one or a combined dock. Keep an eye on my designs for this one in a few days! Hope you guys
Print Settings
Printer:
CraftBot+ Rafts:
Doesn’t Matter Supports:
Yes
Post-Printing
It needs some work to make the text on top look smooth, as well as the surfaces may need some post-production smoothening (differs per settings / printer ofcourse). -
Keychains 971 / 974 (Guadeloupe) / (Réunion) 3D Print Model
Summary
Porte-clés avec numéro des départements français d’outre-mer.
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
No Supports:
No Resolution:
0.2mm Infill:
33% -
steering shock bracket 3D Print Model
Summary
custom design steering shock bracket for 97 ram 1500 4×4 -
Phone Holder 3D Print Model
Summary
This is a phone holder I designed primarily for larger format cell phones (5.5 inches) but it will probably work for small tablets also. Add some anti-slip nibs on the bottom surface.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Infill:
10% Notes:
I printed wit 70% overhang supports (90 deg being horizontal surfaces) and obtained good results. -
“This Is Fine” Desk Caddy 3D Print Model
Summary
This is a standard desk caddy for organization with the classic internet comic “This is fine” extruded into the main face. No important instructions for it, other than it should be turned 90 degrees to face upright. Prints well at 0.2 mm layer height and even better at 0.1 mm layer height (pictured) as there is more detail in the comic.
Enjoy! -
Inkbird ITC-1000 Temperature controller case 3D Print Model
Summary
My mom’s prehistoric food dehydrator quit working due to the thermal fuse blowing. after replacing it twice I decided that the problem was more likely to be the thermostat sticking, and decided to replace it. Amazon search for PID ended up showing the Inkbird ITC-1000 ( which is not a PID, I didn’t realize that when i bought it)
I liked the 10A contact rating for the internal relay, so i got one and had to figure out how to mount the ‘PID’ controller.
I made this box and mounted it and the unit works great now. heats up faster then when i used my external PID (my real Pid controller)
The Box has cut outs at the back for surface mounting the box and cutting or drilling the holes for the wires into whatever you want to control. I used 1 3/4″ 6-32 screws to mount the box, after I used a drill to clean out the holes. I had to sand the mated edges of the box to get a snug fit, like a few thousands of clean up. I printed this in ABS with .2mm layers and 3 outlines and 3 top and bottom layers on my Flashforge creator pro.
As always I uploaded my Sketchup files in the event anyone wants to change the design easily. Please comment if you build. I like comments. -
Apple MacBook USB-C Docking Station 3D Print Model
Summary
I got this great little USB C Hub, however when ever I moved the computer the hub would wiggle and eventually disconnect.
This dock solves this and props up the computer a bit more making it more natural to type.
If your printer is too small to print the strip in a single piece, you can use the connector to join the two parts.
I used NinjaFlex at 50% infill and rubber ciment to glue them together. -
Designer Vase 3D Print Model
Summary
Simple minimalistic vase that looks great and can function as pen holder, flower pot and much more.
Use vase mode for best results.
Happy printing! -
desk thingy 3D Print Model
Summary
pen organizer
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Rafts:
No Supports:
No Notes:
the base and cubes have no tollerance, as I CNC’d the base. If you print it you probably need a bit of tollerance, use f.e. CURA horizontal expansion for this. -
Lamp Shade 3D Print Model
Summary
Need something to lighten up your day?
Try using this lamp shade full of mesmerizing lattice structures.
This current design is for C7 bulb but is universal as its’ size is scalable for other bulb types.
For assembly, glue each half together around the bulb.
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.07 -
antibody 3D Print Model
Summary
Stylized antibody model.
Small for 3D business cards.
Larger scale for rare earth magnet.
Print Settings
Printer Brand:
FlashForge Printer:
Finder Rafts:
No Supports:
No Resolution:
High Infill:
80% Notes:
Antibody stylized model.
TrueSpace CAD -
Hypercube Evolution 3D Print Model
Summary
This mount allows you to use the Flexion Extruder with your Hypercube Evolution. It includes a Bltouch sensor mount as well.
The extruder mounts through the stepper motor. To do this remove the top two screws on the stepper motor and replace with 45mm M3 screw going through the top two holes.
The 40mm fan mounts on the front. You will need two spacers. I had two spare from my old duplicator but you could print some from (https://www.thingiverse.com/thing:1656609). Between the 40mm fan and the spacer is the radial fan mount. I hot glued the radial fan in just to be safe but it really did not need it.
I printed the fan mount with supports and both with 50% infill. -
Spielfigur – Ludo 3D Print Model
Summary
This is a Toy figure, refrigerator magnet
Different to the original is the size and the magnet in the bottom
Print Settings
Printer:
anet a8 Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Notes:
Print with Brim -
Bump Vase – Solid Remix (Lower Poly) 3D Print Model
Summary
Made it solid to accommodate printing in vase mode.
Also made it a lower poly version.
I printed with a0.6mm nozzle @ 0.35mm layers, using transparent PLA @ 210° & 80mm/s
Took 2hr7m in vase mode. -
MakerFaire Robot Chair 3D Print Model
Summary
A chair/console seat for the Maker Faire robot.
Based on the single piece print robot from LeFabShop (thing:331035).
The chair has been sized to fit a scaled down robot (around 70%). -
Smartphone Holder – Handyhalter 3D Print Model
Summary
This a Remix of a Smartphone holder.
Change is the front with a cut for mobile fons with a lower home button.
Print Settings
Printer:
anet a8 Supports:
No Resolution:
.2 Infill:
20% Notes:
Print with Brim -
FPV SMA Connector Thumb Wheel 3D Print Model
Summary
This printed part fits the 8mm SMA connector nut used on FPV gear. It slips over the nut portion making it easy to tighten/loosen the nuts without a wrench. I print one for each SMA connector and leave it in place. Using PLA the weight is just .25 gm.
There is a small and large version. The large has an outside diameter 1.5 mm larger then the small. I use the small for tight places such as a 45° or 90° fitting. I use the large where there is plenty of room to grasp and turn. You can get the nut slightly tighter with the large version.
Both versions have a .5mm slit to provide a little spring. This allows it to slide easily over the nut and allows for expansion and contraction from summer heat to winter cold. -
DKW logo/keyring 3D Print Model
Summary
DKW keyring, may need to redefine profile for better definition at smaller scale.
scale to suit -
Samsung Galaxy J3 Prime 3D Print Model
Summary
My first bottom up design. Needed a cell phone case and coundn’t find a file for it so this is what I came up with. Fits good and tight and everything lines up. Printed .2 with supports touching build plate and 15% infill. Enjoy and let me know how it comes out.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
.2 Infill:
15%
How I Designed This
Tinkercad -
Tektronix CRO encoder stepping knob 3D Print Model
Summary
This is to replace the encoder knob on a Tektronix CRO.
It uses a 4.5mm ball bearing and a spring from a pen cut to the length of the circular hole.
The base (part1) is stuck on with using double sided tape.
See more what I have done: http://tinkersprojects.com/ -
MECHANICAL MILK STIRRER 3D Print Model
Summary
Hello everyone.
This project is very good for children’s fun and also for their education since it can be assembled and dismantled and used in food.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator (5th Generation) Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
100% Infill:
MAX DENSITYStandards
CCSS
Overview and Background
Lesson Plan and Activity
Materials Needed
-
Fridge picture frame for your post cards 3D Print Model
Summary
A picture frame that I put magnet strips on the back to trap post cards on the fridge.
https://www.youtube.com/ChrisRiley -
Universal Phone Lean/Stand 3D Print Model
Summary
Universal phone stand, for use horizontal with most phones, You do not have to print a support structure -
Multi-part stellated icosahedron 3D Print Model
Summary
This is a stellated icosahedron that prints in parts. You print both parts twice and then assemble the results. There are modeled in holes for dowels to lock the parts in place. I used a machine screw for final assembly. In the photo, you can see the 4 parts printed in 4 different PLA colors.
Growing up, My Dad would make one of these out of soda straws each Christmas. There is a photo of one of them included above.
Print Settings
Printer Brand:
PrintrBot Printer:
Printrbot Simple Metal Rafts:
Yes Supports:
No Infill:
20% Notes:
I had the best luck printing this on a raft. You need to print two of each part and then screw it all together. If you have a large build plate, you could print all 4 parts at once. -
24inch S Curve Loom 3D Print Model
Summary
A 24 inch knitting loom -
S.S. Chicken Trump 3D Print Model
Summary
This is an air-boat in honor of President Trump. #makeamericagreatagain -
TUSH spool holder/side hang/ for Makerbot rep+ 3D Print Model
Summary
https://www.thingiverse.com/thing:2494752
This original piece was done by QuantumChoco. The remix holds a TUSH spool holder on the side of the printer.
https://www.thingiverse.com/thing:2047554
link above to get-[ TUSH spool holder ]
Print settings:
Default Print modes:Draft
layer height = 0.3mm
infill density = 25%
Shells = 3
infill pattern= cat fill
support = on -
Fabriktor Mini II LED protection light 3D Print Model
Summary
In order to focus the LED light only onto the main build platform I attached these two elements to the moving Z axis platform and reduce the light to the upper part of the printer. See pictures. Last picture is without the LED protectors -
TEVO TORNADO KNOB LEVELING. 3D Print Model
Summary
Tevo tornado knob leveling.
55mm diameter
5mm height.
it fits just perfect! -
Humbucker routing template 3D Print Model
Summary
Just an average humbucker routing template. I advise a 3/8″ router bit with bearing. -
Low Poly Bunny 3D Print Model
Summary
Low poly bunny! Print in any size. Supports required.
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes -
CR-10 Micro-Swiss 300c HotEnd Mount for Fang 3D Print Model
Summary
I recently picked up a Micro Swiss 300c Hot End, and the mount I had been using on the stock hot end no longer worked. Modified the STL in Tinkercad. Good snug fit on mine. Let me know of problems.
Usiing this fang which has better cooling than a fang with the 40mm fan: https://www.thingiverse.com/thing:2446196 -
Modified servo mounts and motormount 3D Print Model
Summary
These are STL files that Wersy made for my Red duck.
I wanted to use bigger servos and a stronger motor. Used HK 151538 hobby king servos.https://hobbyking.com/en_us/hobbykingtm-hk15138-standard-analog-servo-4-3kg-0-17sec-38g.html It needs to have both the mount and the slot
Also used a heavier motor. So a new shorter nose was used. I felt that the plane needed better take off performance. -
Rabbit Full Bottle Icon Cylinder – Kamen Rider Build 3D Print Model
Summary
Just a cylinder of the Rabbit Full Bottle icon.
Print Settings
Printer Brand:
MakerGear Printer:
MakerGear M2 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter -
![Mini Gun Fort [28mm wargaming terrain] 3D Print Model](https://3dhunt.co/static/2017/11/719bbc26d9e58439935235970e9f2107.jpeg)
Mini Gun Fort [28mm wargaming terrain] 3D Print Model
Summary
A small fort for a gun team with which to anchor your lines!
Should be straightforward to print. No supports required. About 105mm diameter. Full and hollow versions of the body are included, but there’s really no reason to not use the hollow version.
Print Settings
Printer Brand:
LulzBot Printer:
Mini Rafts:
No Supports:
No Resolution:
.18mm Infill:
20% Notes:
HIPS. Cura. -
Gerber Ghoststrike Extended Grip 3D Print Model
Summary
Replacement for the less than secure rubber grip that comes standard with the knife, added pinkie rest for larger hands and easier removal from the sheath.
Print Settings
Printer Brand:
Printrbot Printer:
Play Rafts:
No Supports:
No Resolution:
1.5 Infill:
100% Notes:
Infill doesn’t matter but i do 100 percent so I can sand the edge flush -
Shield Template 3D Print Model
Summary
I designed a Shield for my English project I was making and I thought I should upload it before I put any changes on it so other people can use. -
Magnet Holder 3D Print Model
Summary
Made for my sowing teacher.
Used to pick up pins.
Place a 5x1x1cm magnet in the block
Print 2 and glue together. -
Bed Frame Pocket 3D Print Model
Summary
The hook on the side is meant to be an eyeglass holder and it also has a phone charger hole in the bottom. -
Magnetic 18650 Battery Case 3D Print Model
Summary
Magnetic Lid Battery case, holes are made for a 3mm x 1mm magnet.
case fits 3 18650 battery’s -
2 1/4″ Circle Ruler 3D Print Model
Summary
This is a quilting ruler for free-motion quilting. I made this for my wife, who blogs here. She uses it to quilt orange-peels. I’m still not entirely sure what those are, but she seems to like them. This apparently works pretty well for that purpose.
The ruler has a hole in the middle to aid holding in place.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.15mm (but 0.2 or even higher would probably work fine) Infill:
15%
How I Designed This
All done in Fusion 360, the entire thing is driven by a single dimension in the first sketch, so it should be relatively easy to alter the print to whatever size you need. I just used the built in text tool in Fusion for the text, the “1/4” bit is just the unicode character. -
ShoreTrooper Helmet V2 (SeanKFields) Split to fit 200×200 build plate 3D Print Model
Summary
This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from http://shoretrooper.co.uk
I have left the original sized pieces intact and added A and B options which are the bits I needed to split. The face will fit on the bed but I found it easier printing these split up and then gluing back together. I did put a registration tab on the rear rim but after printing a few of my chopped bits it wasn’t necessary so left the rest.
I’ve only managed to get the pieces printed so far and will update the images once I have put it together. I have done some test fits and all pieces line up with no issue.
Legal bit from the included text file (me being SeanKFields):
Usage Rights:
These files are distributed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) viewable here.https://creativecommons.org/licenses/by-sa/4.0/
Basically, it says that if you intend to redistribute my work in any way, you must credit me as the original creator. This mostly pertains to anyone wanting to use the files commercially. If you’re using the files to print your own helmet, you don’t need to tag me every time you post a picture. You can, but it’s not a part of the agreement.
Speaking of commercial use: Anyone who chooses to do so has my permission to create and sell helmets based on these files. As before, I ask that you not sell the 3D files themselves, but printing and selling a helmet, or selling a helmet cast from a mold made from a printed masters is perfectly acceptable.
As before, there are a few rules. Some of these are new.If you intend to create and sell a product based on these files (printed kit, resin casting, etc.), I ask that you send me a sample of said products. Consider this the licensing fee. I ask this for 2 reasons:
a. It serves as a means for me to identify every vendor using the files.
b. It gives me an opportunity to inspect overall product quality.If you profit from my work, I highly encourage you to take a portion of that profit and do something good in the world with it. Donate to charity. Buy a homeless guy a sandwich. Adopt a shelter dog. It doesn’t matter what it is. Follow your heart.
While I certainly do not require it, I will gladly and graciously accept tips this time. My Paypal address is [email protected]
-
Mag-Holder 3D Print Model
Summary
This Mag-Holder is 5/32 depth and 1″ Diameter 10lb. Pull Force that is the size magnet you will need.
Materials Needed:
5/32 Neodymium Magnet
Mounting Screws
Can be mounted in your car, tool shed, house or anywhere you need to hang something.
I will have more with different size and strength magnets coming soon.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
.2mm Infill:
30% -
Teal Drone Ring Jousting 3D Print Model
Summary
My design is to give a new option to racing games that people can play by adding ring jousting. The idea is to set up a collection of rings that the pilot has to pick up and carry back to the finish line as they travel the course. -
Nose Clip 3D Print Model
Summary
Nose clip that i’m going to be using for my next project (Steampunk Gas Mask) that works 😉
!Don’t forget to check out my other designs and Follow my weekly KooKoo uploads, Enjoy 😉
Print Settings
Rafts:
No Supports:
No Resolution:
0.2 Infill:
75% Notes:
3 shells -
2DArt Birds on branch 3D Print Model
Summary
We made a 2D-3D version representation of birds on a branch using source images for reference.This piece has three leaves, both a large and small bird, a tree branch, and my initials. To make the branch appear 3D, my partner and I extruded the back panel to 0.2 cm, the branch to a total of 0.5 cm, the birds and leaves to a total height of 1 cm. My initial are also extruded to 1 cm.
partner link: https://www.thingiverse.com/thing:2596313Overview and Background
Lesson Plan and Activity
Directions:
Problem Statement: With a partner, you will design a “2D” placard using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.
Constraints:
Should have a flat back; detail will be on the front side
Should fit inside a box that is 10 cm x 10 cm when lying flat
Should be no more than 1 cm thick
Should be as detailed as possible
Detail will be made using sketches that are extruded to different heights
No error messages
Do not extrude contours – each feature should have its own sketch
Part should be CENTERED about the origin
Demonstrate efficient use of construction lines
Demonstrate efficient use of automatic and manual relations
Demonstrate efficient use of Smart Dimensions
Demonstrate efficient use of mirroring
Demonstrate efficient use of linear or circular patterns -
3DPOWER POCO-Split Parts Accessories (Beeper Holder, Bumper) 3D Print Model
Summary
3DPOWER POCO-Split Parts Accessories (Beeper Holder, Bumper) -
DE Safety Razor and Brush Stand 3D Print Model
Summary
Rotate so its laying flat and print with supports. Works with Rockwell 6s/6c or Merkur 34c razors.
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
Yes Resolution:
.2 Infill:
20%
Post-Printing -
Pixel 2 XL Slider Case 3D Print Model
Summary
Basic Slider case for Pixel 2 XL. Test printing shortly. -
Mini-Closet 3D Print Model
Summary
Is your stylin’ sock monkey (or other doll) in need of a place to keep their trendy wardrobe?!? Look no further! The designer who created this quick print made it easy to assemble and use. It keeps any miniature wardrobe organized and wrinkle-free. Print as many as you need, because when it comes to mini-clothes, less is Moe!
Geometry of Closet:
Distance between rod end hole and bottom of frame: 3.75 inches
Rod length: 4 inches
Hanger width: 6.25 inches
Print Settings
Rafts:
Yes Supports:
No Resolution:
100% Infill:
100% Notes:
Print two triangle frames, one rod, and as many hangers as you need for one mini-closet. It’s best to print the rod vertically with rafts but the hangers and triangular frames do not need rafts. Test printed in PLA.
Post-Printing
It’s best to secure the rod ends to the triangular frames with some Superglue or E6000 to ensure the structure remains rigid while in use. -
Cura Lift Head at Z for PETG Print Gap Plugin 3D Print Model
Summary
Well, they say that PETG likes to “lay down” and not be “smooshed down” like other filaments. After the first layer, you should raise the print head slightly so there’s a gap between the nozzle and the printed piece. This plugin will let you do it in cura.
How to use it: Put it in your <cura 3x>/plugins/PostProcessingPlugin/scripts directory. You will need to restart Cura. Go to the Extensions menu, then Post-Processing and Modify G Code. You will be able to select the plugin there.
The height should be set to greater than your first layer height but less than your second.
Code was altered from BQ_PauseAtHeight.py plugin.
Thingiverse requires an STL or design file to submit something, so I uploaded a test shape I use to test new filaments. Enjoy! -
Lion litophane 3D Print Model
Summary
This is a litophane. To se the effect you need to use white fillament and have some cind of light behind.
Print Settings
Printer:
xyz Da Vinci Mini W Resolution:
0,2mm Infill:
100% -
Bristol F.2B – First World War Airplane / Avion de la Première Guerre mondiale 3D Print Model
Summary
(Le français suit l’anglais)
The U.K. designed Bristol Fighter was the most successful two-seat combat aircraft of the First World War. It was initially designed as a reconnaissance machine, the Bristol Fighter’s robust design, powerful engine, good manoeuvrability and relatively heavy armament enabled it to excel as a fighter aircraft.
The Bristol F.2B found at the Canada Aviation and Space Museum was built in 1918. It was restored by Historic Aircraft Collection in the U.K. from the early 1980s to 2006. In 2006, it flew in several aerial displays in Britain. The Museum then acquired the fighter through an aircraft trade later that year.
For more information about the Bristol F.2B please visit:https://ingeniumcanada.org/aviation/collection-research/artifact-bristol-f2b-fighter.php
Note: This model is mainly meant to be viewed in a virtual environment using computer software. You can try printing it off, though we cannot guarantee the quality. For educational activities that this model can be used in, please visit:https://ingeniumcanada.org/ingenium/museums/education/3D-aircrafts.php
Our terms of use can be found at: https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20ENG.pdf
De conception britannique, le Bristol Fighter est le chasseur biplace qui a connu le plus de succès pendant la Première Guerre mondiale. Étant donné sa robustesse, la puissance de son moteur, sa maniabilité et son armement relativement lourd, cet avion d’abord destiné à la reconnaissance a excellé comme chasseur.
Construit en 1918, le Bristol F.2B du Musée de l’aviation et de l’espace du Canada a été restauré par la Historic Aircraft Collection, au Royaume-Uni, du début des années 1980 jusqu’en 2006. Cette année-là, il a participé à diverses présentations aériennes en Grande-Bretagne. Le Musée l’a acquis la même année en l’échangeant contre un autre appareil.
Pour obtenir un complément d’information sur le Bristol F.2B, visitez le sitehttps://ingeniumcanada.org/aviation/collections-recherche/artefact-bristol-f2b-fighter.php
Remarque : Ce modèle est conçu pour être visualisé dans un environnement virtuel au moyen d’un logiciel. Vous pouvez tenter de l’imprimer. Toutefois, nous ne pouvons garantir la qualité de l’impression. Pour prendre connaissance des activités éducatives permettant l’utilisation de ce modèle, visitez le site https://ingeniumcanada.org/ingenium/musees/educatif/avions-3D.php
Vous trouverez nos conditions d’utilisation à l’adresse https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20FR.pdf -
Royal Aircraft Factory B.E. 2c – First World War Airplane / Avion B.E. 2c de Royal Aircraft Factory – Avion de la Première Guerre mondiale 3D Print Model
Summary
(Le français suit l’anglais)
The U.K. designed B.E. 2s saw service with the Royal Flying Corps (U.K.) from 1912 onwards. The B.E. 2c operated in France, mainly for reconnaissance and observation, although some were single-seat bombers. Single-seat B.E. 2c night fighters downed six airships over Britain.
The B.E. 2c found at the Canada Aviation and Space Museum was sent to Canada as a war trophy in 1919. It was restored in the late 1950s and became a part of the Museum in 1964.
For more information about the B.E. 2c please visit:https://ingeniumcanada.org/aviation/collection-research/artifact-royal-aircraft-factory-b-e-2c.php
Note: This model is mainly meant to be viewed in a virtual environment using computer software. You can try printing it off, though we cannot guarantee the quality. For educational activities that this model can be used in, please visit:https://ingeniumcanada.org/ingenium/museums/education/3D-aircrafts.php
Our terms of use can be found at: https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20ENG.pdf
De conception britannique, les appareils B.E. 2 ont été utilisés par la Royal Flying Corps (Royaume Uni) à partir de 1912. En France, les B.E. 2c ont été utilisés comme avions de reconnaissance et d’observation, ainsi que, dans quelques cas, comme bombardiers monoplaces. Des chasseurs de nuit B.E. 2c ont abattu six dirigeables au-dessus de la Grande Bretagne.
Le B.E. 2c du Musée de l’aviation et de l’espace du Canada a été envoyé au Canada en 1919 comme trophée de guerre. Il a été restauré vers la fin des années 1950 et a été ajouté à la collection du Musée en 1964.
Pour obtenir un complément d’information sur le B.E. 2c, visitez le sitehttps://ingeniumcanada.org/aviation/collections-recherche/artefact-royal-aircraft-factory-b-e-2c.php
Remarque : Ce modèle est conçu pour être visualisé dans un environnement virtuel au moyen d’un logiciel. Vous pouvez tenter de l’imprimer. Toutefois, nous ne pouvons garantir la qualité de l’impression. Pour prendre connaissance des activités éducatives permettant l’utilisation de ce modèle, visitez le site https://ingeniumcanada.org/ingenium/musees/educatif/avions-3D.php
Vous trouverez nos conditions d’utilisation à l’adresse https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20FR.pdf -
A.E.G. G.IV – First World War Airplane / Avion de la Première Guerre mondiale 3D Print Model
Summary
(Le français suit l’anglais)
The Allgemeine Elektrizitäts Gesellschaft (A.E.G.) G.IV bomber went into general
use with the German Air Force in 1917. Because of its relatively short range,
the G.IV served mainly as a tactical bomber, and operated close to the front lines.
The G.IV flew both day and night operations, but, as the war progressed, was
restricted increasingly to night missions. A.E.G. units operated in France,
Romania, Greece, and Italy.
The A.E.G. G.IV found at the Canada Aviation and Space Museum was transported to Canada in 1919 as a war trophy and has remained in the country ever since. It is the only
surviving multi-engine German aircraft from the First World War and it is the only surviving aircraft from this period covered in the unique German “night lozenge” camouflage pattern.
For more information about the A.E.G. G.IV please visit:https://ingeniumcanada.org/aviation/collection-research/artifact-aeg-giv.php
Note: This model is mainly meant to be viewed in a virtual environment using computer software. You can try printing it off, though we cannot guarantee the quality. For educational activities that this model can be used in, please visit: https://ingeniumcanada.org/ingenium/museums/education/3D-aircrafts.php
Our terms of use can be found at: https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20ENG.pdf
Le bombardier Allgemeine Elektrizitäts Gesellschaft (A.E.G.) G.IV a été mis en service dans l’armée de l’air allemande en 1917. En raison de son rayon d’action relativement court, il a surtout été utilisé pour des missions de bombardement tactique près du front. L’A.E.G. G.IV a servi à réaliser des opérations de jour et de nuit, mais, avec le temps, on l’a de plus en plus réservé aux missions nocturnes. Il a été utilisé en France, en Roumanie, en Grèce et en Italie.
L’A.E.G. G.IV du Musée de l’aviation et de l’espace du Canada a été expédié au Canada comme trophée de guerre en 1919 et est demeuré ici depuis. C’est le seul avion allemand à plusieurs moteurs utilisé pendant la Première Guerre mondiale qui existe toujours et le seul appareil de cette période qui porte encore le distinctif camouflage de nuit à losanges.
Pour obtenir un complément d’information sur le A.E.G. G.IV, visitez le sitehttps://ingeniumcanada.org/aviation/collections-recherche/artefact-aeg-giv.php
Remarque : Ce modèle est conçu pour être visualisé dans un environnement virtuel au moyen d’un logiciel. Vous pouvez tenter de l’imprimer. Toutefois, nous ne pouvons garantir la qualité de l’impression. Pour prendre connaissance des activités éducatives permettant l’utilisation de ce modèle, visitez le site https://ingeniumcanada.org/ingenium/musees/educatif/avions-3D.php
Vous trouverez nos conditions d’utilisation à l’adresse https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20FR.pdf -
CTC Bizer Makerbot Replicator Dual to Single Titan Aero 3D Print Model
Summary
CTC Bizer Makerbot Replicator Dual to Single Titan Aero
Drop in Dual to Single Extruder Mod with Hotend Cooling duct.
Used original motor and just added E3D Titan with Aero Hotend.
Cooling duct uses M3 Knurl Insert Nut threads from ebay https://www.ebay.com.au/itm/122046120352 I used the M3x4x4 Knurl Insert Nut
You may need to trim one corner of you Aero Cooling Fan as per the images.
The bracket places the hotend nozzle almost exactly over the original Right Hand Nozzle placement to reduce firmware adjustment. Also has striker for the X carriage endstop.
You will need to measure and re drill to move the Z axis endstop up to compensate for the higher nozzle.
Print Settings
Printer:
Lulzbot TAZ6 Custom Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.3 Infill:
60 – 80% -
Demogorgon 3D Print Model
Summary
This is a bust of the Demogorgon from “Stranger Things” that I made using Oculus Medium and TinkerCad. I have nothing to do with any of these companies.
It prints well without supports, minus a little stringing between the teeth because they’re small, but you can leave them to make it look like slime/saliva dripping off the teeth!
Post-Printing -
Fan Duct for Blower fan 3D Print Model
Summary
Simple fan duct for blower fan http://amzn.to/2gTWuWL -
Fan Duct for Blower fan 3D Print Model
Summary
Simple fan duct for blower fan http://amzn.to/2gTWuWL -
Monoprice Maker Select V2.1 Hot Bed Cable Bracket 3D Print Model
Summary
This is a bracket to help keep the hot bed wires from bending and hitting the build plate. It also keeps the wires low and away from a rear mounted part cooler when the extruder is near the rear of the build plate. The bracket is designed to work with the RepRap Champion Y Carriage Plate Upgrade for the Monoprice Maker Select / Wanhao Duplicator i3.
To install:
Place the bracket between the Y-carriage plate and the hot bed with the clips pointing down, near the hot bed wires. Hook the clip on the outside of the Y-carriage plate and slowly lift the end until the other clip clicks into place inside the Y-carriage plate cutout. It’s a tight fit so some trimming may be needed. Once the bracket is in place, lay the hot bed wires on top of it and use a small zip tie and the provide holes to secure them in place. Make sure the eyelet of the zip tie is on the upper side of the bracket to keep it from hitting the frame.
Print Settings
Rafts:
No Supports:
No Resolution:
0.2 Infill:
100% -
Artist Paint Tube Separators 3D Print Model
Summary
I added a narrow shelf to the lid of my pochade box so I can place two rows of paint tubes cap down, and not have them falling all over the place as they used to… -
Amiibo Stand System – With Connectors 3D Print Model
Summary
Amiibo were taking over the house, so I decided to do something about it!
First, I made a beautiful stand:
https://www.thingiverse.com/thing:2613221
Which was based on a fantastic guide:
https://imgur.com/gallery/P68cT
I went to print it out, and it was hilariously larger than the maximum size of my FFCP 2016.
So then, I did what any engineer would do: I sketched out a modular system!
Originally, as a test, I made a no-connector (connectorless?) system, that you could use to make your own base, using glue or tape to stick things together:
https://www.thingiverse.com/thing:2625743
That was cool, and it allowed me to test the blocks/modules to make sure they’d print right, look good, and hold Amiibo properly. I’m sure some folks will be happy with the connector-free modules, and will simply use super glue or tape to hold things together.
Me, I knew I wanted something with connectors. I like curves, but I realized that circles are fully symmetrical, and would allow rotation. These should go together perfectly at right angles, 180°, so I decided on a two-way keying system (because one-way is annoying) in the oval. You can connect these right-side-up or upside-down, but that’s about it. If you wanted something a little more fool-proof, I could probably do a system that had a softened (curved point) triangle, which would allow for only one real way (the other ways would not be at 90° angles). I could even put in an asymmetrical hole but, honestly, that’s just getting too confusing. Plus, these modules are symmetrical, so you can rotate them, and use them however.
There are six different types of modules, in three different heights.
The types of modules are: no holes, one hole, two corner holes, two opposite holes, three holes and four holes. Obviously, the “no holes” won’t connect to anything unless you’re willing to use glue, tape, or for something stand-alone. I promise I won’t judge you! Obviously, the other five modules are for connecting with the provided “rods.” The “tight rod” feels like a porn star name. It’s not. Printed at Medium (0.2mm) layer height, it’s a snug fit. You may have to clean up the end(s) a little bit, but in mine, I just had to give a little pressure and the rod slid into the hole no problem. If one side is tighter, press that side in manually first, and then slide the other module into the looser rod end. That should make things easier.
I was playing with a “max” sized height (maximum Z height of the FFCP 2016 edition), but realized most folks are going to want to start out with the low, medium and high designed here. I used the Fibonacci sequence (Golden Ratio), to design the heights, widths and lengths. I enjoy good design, and hope you find these visually appealing.
I will share my sketch later, so you can see how I originally intended for this to be used. It’s a free-form sketch, so don’t judge me or my artistic ability!
If you make one of these, please share a Make here. I love to see what people do with my Things. Seriously!
If you have a suggestion, comment or question, please leave a comment somewhere on this Thing. I try to take suggestions and make them a reality. One of the ideas I had originally was to make a two-by on the top, so you could have a larger margin/area to display some of the “fatter” Amiibo, while still looking good. I may share/print the “max” size items, but we’ll see how I feel. I think the three-tier system works fairly well, but at some point, when you get out to eight or nine wide, a fourth layer might make it look better than just the three. We’ll see.
< soapbox > As an aside, my brother took his life last week, and this is a way for me to keep busy before the funeral. I like to celebrate and enjoy life. If you aren’t enjoying what you’re doing, do something else. If you’re depressed, seek counseling. Suicide is never the answer. It leaves behind a metaphorical and physical mess that someone else has to clean up. Selfish and shitty. If you can’t stick around for yourself, stick around for friends, family, your pets, the nice cashier at the grocery store who always smiles at you, the waitstaff at your local restaurant, the police who will have to investigate the scene, and the coroner who will have to take you apart. Suicide sets in motion a huge series of events that you won’t have to be around to deal with. But none of those events are fun. Talk to someone. There are always options. < /soapbox > -
Raspberry Pi2/3 Portable 3D Print Model
Summary
Remove the top cover can do other applications.
Build a handheld game console that you can find HERE: https://ken77kuo.blogspot.tw/ -
Lifestraw Bottle Adapter 3D Print Model
Summary
Remixed to add an adapter for a hose to a water badder so that it can be used as a gravity filter (ie. sawyer squeeze or mini). -
CR-10 Dual Z Pulley Setup 3D Print Model
Summary
As requested here are the files for the dual Z setup I recently set up. One of my main design goals was to not use any set screws. Here are the specific parts I used.
T8 600mm 3D Printer Stainless Steel Lead Screw Coupling Shaft Mounting Bearing
Link: http://r.ebay.com/eVLz50
BIQU GT2 Synchronous Wheel 60 Teeth 8mm Bore Aluminum Timing Pulley for 3D Printer 6mm Width Belt (Pack of 2pcs)
BIQU
Link: http://a.co/eORAb49
BIQU GT2 20Teeth 3mm Bore Aluminum Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)
BIQU
Link: http://a.co/iPQ3g65
Uxcell a16031400ux0530 3D PRINTER 2GT-6 Ring Closure Timing Belt Closed 852mm Circumference, HSS
uxcell
Link: http://a.co/bhJZ4WH
Print Settings
Printer:
Hictop CR-10 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2mm Infill:
50% -
Watch Porto (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2y5KMzk
WATCH: http://tinyurl.com/yc6avgu6
Sinopsis :Jake and Mati are two outsiders in the northerly Portuguese city of Porto who once experienced a brief connection. A mystery remains about the moments they shared, and in searching through memories, they relive the depths of a night uninhibited by the consequences of time.
Cast: Lucie Lucas, Anton Yelchin, Paulo Calatré, Françoise Lebrun, Chantal Akerman
Genre: Romance, Drama
Production:
Keyword:
Watch NOW!! Porto (2017) Full Movie, Watch Porto (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee Porto (2017) Online Free Full Movie ~ Porto (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ Porto (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, Porto (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario Porto (2017) will get a Big fans on the world. Online Dailymotion, Porto (2017), download 5Shared, Porto (2017), Online HD 700p, 1080p Fast Streaming Get free access to Porto (2017) movie, with excellent audio/video quality and virus free interface, Porto (2017) online at ultra fast data transfer rate, cost-free, virus-free access , with maximum speed, you immediately Porto (2017) , or download Porto (2017) , here, follow the ling below and hopefully you satisfied Watch full stream Porto (2017) , Series for Free Online. Streaming Free Films to Watch Online including Series Trailers and Series Clips. Porto (2017) , Quick Links. Watch TV Series online Porto (2017) , Full Episode, Porto (2017) , Online Youtube, Porto (2017) , Online Dailymotion, Porto (2017) , download 5Shared, Online HD 70p-1080p Fast Streaming, Tag : Porto (2017) , Porto (2017) , Porto (2017) Full, Porto (2017) Movie, Porto (2017) Streaming, Porto (2017) Online, Porto (2017) 2015 Full Movie, Porto (2017) Movie Online, Porto (2017) Download, Porto (2017) Full Movie, Porto (2017) Straeming full free, Watch: Porto (2017) HD 1080p, Watch: Porto (2017) HDQ, Watch: Porto (2017) Megavideo, Watch: Porto (2017) Tube, Watch: Porto (2017) Download, Watch: Porto (2017) Megashare, Watch: Porto (2017) Youtube, Watch: Porto (2017) Viooz, Watch: Porto (2017) Putlocker, Watch: Porto (2017) instanmovie, Watch: Porto (2017) Dailymotion, Watch: Porto (2017) IMDB, Watch: Porto (2017) MOJOboxoffice, Watch: Porto (2017) Torent, Watch: Porto (2017) HIGH superior definitons, Watch: Porto (2017) Mediafire, Watch: Porto (2017) 4Shared, Watch: Porto (2017) Full Movie, Watch: Porto (2017) Full, Watch: Porto (2017) Streaming Full, Watch: Porto (2017) HDQ full, Watch: Porto (2017) Download Sub Porto (2017), Watch: Porto (2017) Sub Porto (2017) English, Watch: Porto (2017) Download Full, Watch: Porto (2017) Streaming, Watch: Porto (2017) English Film Free Watch Online, Watch: Porto (2017) English Full Movie Watch Online, Porto (2017) Full Movie Online, Porto (2017) Full Movie Online Free, Porto (2017) English Film Free Watch Online, Porto (2017) English Film Live Steaming, Porto (2017) English Full Movie Watch Online, Porto (2017) English Full Movie Mojo Watch Online, Porto (2017) English Full Movie Watch Online, Porto (2017) Watch Online Full Free, Porto (2017) English Full Movie Download, Porto (2017) English Full Movie Free Download, Porto (2017) English Full Movie Online Free Download, Porto (2017) HD Full Movie Online, Porto (2017) HD English Full Movie Download, Porto (2017) English Full Movie, Porto (2017) Full Movie Watch Online, Porto (2017) English Full Movie Watch Online, Porto (2017) Movie Watch Online, Porto (2017) English Full Movier, Porto (2017) English Full Movie Online -
Watch Holy Air (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2heYugb
WATCH: http://tinyurl.com/yarceymp
Sinopsis :Adam is a Christian Arab living in Nazareth – member of a vanishing minority within a minority in the Holy Land and the Middle East. His wife Lamia is a strong, beautiful and progressive Arab woman, who runs a foundation for women’s rights.
Cast: Laëtitia Eïdo, Shady Srour, Shmulik Calderone, Tarik Copti, Dalia Okal, Byan Anteer
Genre: Comedy
Production: Cinema Virgin, Tree M Productions
Keyword:
Watch NOW!! Holy Air (2017) Full Movie, Watch Holy Air (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee Holy Air (2017) Online Free Full Movie ~ Holy Air (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ Holy Air (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, Holy Air (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario Holy Air (2017) will get a Big fans on the world. Watch, “.Holy Air, “.2017, “”Online, “.Free, “.|, “.Full, “.Movie, “.Watch, “.Holy Air, “.Online, “.Stream, “.Full, “.Movie, “.Free, “…Download, “.HD, “.Watch, “.Holy Air, “.2017, “.1080p, “.720p, “.Watch, “..Holy Air, “.2017, “., Full, “.Online, “.Movie, “.Watch, “.Holy Air, “.Online, “”Holy Air, “.Full, “”Movie, “”, Holy Air, “.Movie, “.2017, “.One, “.Click, “.Link, “.Below, “.You, “.Can, “.Watch, “.Holy Air, “.Full, “.Free, , Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.Movie, “.2017, “.Full, “.Movie, Watch, “.Holy Air, “.2017, “.Online.Watch, “.Holy Air, “.2017, “.:, “.Online, “”Watch, “.Holy Air, “.Online, “.Free, “”Holy Air, “.2017, “.Online, “”Holy Air, “.Online, “”Watch, “.Holy Air, “.Streaming, “”Watch, “.Holy Air, “.Online””.Watch, “.Holy Air, “.Prayer, “.For, “.the, “.Dying, “”Watch, “.Holy Air, “.Streaming, watch, “.Holy Air, “.Online””.watch, “.Holy Air, “.Online, “.Stram, “”watch, “.Holy Air, “.2017, “.Online, “”watch, “.Holy Air, “”watch, “.Holy Air, “.2017, “”Holy Air, “”Holy Air, “.2017, “”Watch, “.Holy Air, “.Online, “”Holy Air, “.Live, “.Stream, “”Watch, “.Holy Air, “.Full, “.Movie, “.Online, “.Now, “”Holy Air, “.Live, “.Streaming, “.Free, “.come, “.to, “.Holy Air, “.For, “.Online, “.Full, “.HD, “.2017, “”watch, “.full, “.Holy Air, “.vid, “.Online, “”Holy Air, “.2017, “.Online, “.Free, “”[HD, “.Video], “.Online, “.and, “.Free, Holy Air, “.Stream, “”Watch, “.Movie, “.on, “.Holy Air, “.Online, “.Watch, “.TV, “.Series, “.Online, “.Holy Air, “”Full, “.Movie, “”Watch, “.Holy Air, “”Online, “.Youtube, “”Watch, “.Holy Air, “”Online, “.Dailymotion, “”Watch, “.Holy Air, “”Online, “.couchtuner, “”Full, “.Movie, “.to, “.Holy Air, “.Online, “.(2017), “.’Movie, “.2017′, “.Full, “.HD, “.Stream, “.You, “.can, “.watch, “.Streamof, “.Holy Air., Watch, “.Holy Air, “.Stream, “.Full, “.Online, “.2017, Watch, “.Holy Air, “.Online, “.Free, “”Watch, “.Holy Air, “.TV, “.Series, “.Online, “”Download, “.Watch, “.Holy Air, Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, “.Full, “.Movie’s, “.HD, “”””Watch, “.Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, “.for, “.free, “”””Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, Holy Air, “.Online, “.Movie, “.2017, “.Movie, “.2017, “.Stream””.Watch, “.Holy Air, “.Online, “.2017, “.Stream””.Watch, “.Holy Air, “.””.Watch, “.Online, Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full -
Dual 5.25 Bay Computer Reservoir (BETA) 3D Print Model
Summary
This is a dual 5.25 bay computer water reservoir getting remixed from what i saw CodonExe do except i was greedy and wanted more water capacity. I even incluced my Blender files if any one wishes to continue my work on this project. I wouldnt even dare to print this yet! As files will be changing constantly till i see fit for use. This is a very crude start. -
Watch The Light of the Moon (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2y5FBj3
WATCH: http://tinyurl.com/ycr4qmaa
Sinopsis :After a New York City woman is sexually assaulted while walking home one evening, she struggles to accept the truth and rediscover the intimacy within her relationship.
Cast: Stephanie Beatriz, Michael Stahl-David, Conrad Ricamora, Catherine Curtin, Olga Merediz, Cindy Cheung, Susan Heyward, Craig Walker, Cara Loften, Michael Cuomo, Sarah Dacey-Charles
Genre: Drama
Production:
Keyword: #secret #architect #new york city #woman director #sexual assault
Watch NOW!! The Light of the Moon (2017) Full Movie, Watch The Light of the Moon (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee The Light of the Moon (2017) Online Free Full Movie ~ The Light of the Moon (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ The Light of the Moon (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, The Light of the Moon (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario The Light of the Moon (2017) will get a Big fans on the world. Watch, “.The Light of the Moon, “.2017, “”Online, “.Free, “.|, “.Full, “.Movie, “.Watch, “.The Light of the Moon, “.Online, “.Stream, “.Full, “.Movie, “.Free, “…Download, “.HD, “.Watch, “.The Light of the Moon, “.2017, “.1080p, “.720p, “.Watch, “..The Light of the Moon, “.2017, “., Full, “.Online, “.Movie, “.Watch, “.The Light of the Moon, “.Online, “”The Light of the Moon, “.Full, “”Movie, “”, The Light of the Moon, “.Movie, “.2017, “.One, “.Click, “.Link, “.Below, “.You, “.Can, “.Watch, “.The Light of the Moon, “.Full, “.Free, , The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.Movie, “.2017, “.Full, “.Movie, Watch, “.The Light of the Moon, “.2017, “.Online.Watch, “.The Light of the Moon, “.2017, “.:, “.Online, “”Watch, “.The Light of the Moon, “.Online, “.Free, “”The Light of the Moon, “.2017, “.Online, “”The Light of the Moon, “.Online, “”Watch, “.The Light of the Moon, “.Streaming, “”Watch, “.The Light of the Moon, “.Online””.Watch, “.The Light of the Moon, “.Prayer, “.For, “.the, “.Dying, “”Watch, “.The Light of the Moon, “.Streaming, watch, “.The Light of the Moon, “.Online””.watch, “.The Light of the Moon, “.Online, “.Stram, “”watch, “.The Light of the Moon, “.2017, “.Online, “”watch, “.The Light of the Moon, “”watch, “.The Light of the Moon, “.2017, “”The Light of the Moon, “”The Light of the Moon, “.2017, “”Watch, “.The Light of the Moon, “.Online, “”The Light of the Moon, “.Live, “.Stream, “”Watch, “.The Light of the Moon, “.Full, “.Movie, “.Online, “.Now, “”The Light of the Moon, “.Live, “.Streaming, “.Free, “.come, “.to, “.The Light of the Moon, “.For, “.Online, “.Full, “.HD, “.2017, “”watch, “.full, “.The Light of the Moon, “.vid, “.Online, “”The Light of the Moon, “.2017, “.Online, “.Free, “”[HD, “.Video], “.Online, “.and, “.Free, The Light of the Moon, “.Stream, “”Watch, “.Movie, “.on, “.The Light of the Moon, “.Online, “.Watch, “.TV, “.Series, “.Online, “.The Light of the Moon, “”Full, “.Movie, “”Watch, “.The Light of the Moon, “”Online, “.Youtube, “”Watch, “.The Light of the Moon, “”Online, “.Dailymotion, “”Watch, “.The Light of the Moon, “”Online, “.couchtuner, “”Full, “.Movie, “.to, “.The Light of the Moon, “.Online, “.(2017), “.’Movie, “.2017′, “.Full, “.HD, “.Stream, “.You, “.can, “.watch, “.Streamof, “.The Light of the Moon., Watch, “.The Light of the Moon, “.Stream, “.Full, “.Online, “.2017, Watch, “.The Light of the Moon, “.Online, “.Free, “”Watch, “.The Light of the Moon, “.TV, “.Series, “.Online, “”Download, “.Watch, “.The Light of the Moon, The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, “.Full, “.Movie’s, “.HD, “”””Watch, “.The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, “.for, “.free, “”””The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, The Light of the Moon, “.Online, “.Movie, “.2017, “.Movie, “.2017, “.Stream””.Watch, “.The Light of the Moon, “.Online, “.2017, “.Stream””.Watch, “.The Light of the Moon, “.””.Watch, “.Online, The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full -
BETAFPV 1S LIPO CHARGER AND BATTERY HOLDER 3D Print Model
Summary
The time has come to start switching over to indoor flying in my neck of the woods. This item Holds the BETAFPV 1S lipo battery charger with storage for both charged and uncharged batteries and a few spots for misc items.
Charger has a nice snug fit and will not fall out of holder.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.100 – .300 Infill:
100% Notes:
easy print, not real clean up needed after print.
Post-Printing
No clean up is really needed, use a color paint marker if you want to add color to the text.
How I Designed This
Fusion 360 -
Mini Puzzle Cube 3D Print Model
Summary
This is a fun 5 piece 3 x 3 puzzle cube.
Print Settings
Printer:
Mp Select Mini II Rafts:
No Supports:
No Resolution:
.1 Infill:
20% Notes:
I would recommend printing the models at 2 x scale if you want to use it. The size the stl files are now are useable but a little small.
Post-Printing
After printing I colored the pieces with sharpie to add some contrast.
How I Designed This
I had first sketched it out on grid paper. Then I modeled the pieces in Fusion 360. -
Dice set for D&D 3D Print Model
Summary
As I could not find a good complete set of seven RPG dice, I scaled and collected the best dice I could. -
PocketBeagle Case (Rev A2) 3D Print Model
Summary
Just another case for the BeagleBone.org PocketBeagle A2.
Insert a μSD card into the PocketBeagle. Test that the image/board combination works before continuing. Power down.
Place the PocketBeagle into the case and carefully press (minding the USB port) it down past the retainer bars on both sides.
Put the cap on the case and use. -
remix of MrCrankyface by Flyon20s axles middle axles with servo mounts 3D Print Model
Summary
I wanted to build an 8×8 Hemmt. I am new to 3d design so I didn’t want to get into designing gears so I found the mid axles and adapted them for leaf springs and made them longer because my vehicle is wide. I did not have room to put my servos on the frame so I added a mounting plate on the tops. they need tweaking because my turning radius is horrible. I was going to wait till got it working perfect. I will be posting the Hemmt frame and body soon.
Print Settings
Printer:
anet A8 Rafts:
No Supports:
No Resolution:
.02 Infill:
20% Notes:
I printed the half shafts at 100% just for extra strength might not be needed. -
Thor Ragnarok Swords 3D Print Model
Summary
Woo!
One day late, BUT, they’re finally finished! Both swords, screen accurate (as far as I can tell) and fully printable. As with all my swords, they take a metal support rod, 3/16″, that is slotted down the middle. A real passion project of mine. I hope you all enjoy!
Please print and show me if you love it and are faster than me, my printers are kind of slow and old.
Please leave a like and follow me if you want to see more cool stuff like this.
I will also soon be streaming on twitch.tv/polygonaut
Cheers! -
Black and Decker Workmate Bench Top replacement Block 3D Print Model
Summary
Lost some of these on my workmate over the years so modeled one up and printed. Works well.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Yes Supports:
Yes Resolution:
.1 Infill:
50% -
Case for ELECROW 5 inch LCD RPA050105 3D Print Model
Summary
This case is for Elecrow’s (waveshare) 5 inch lcd screen. This is part of a project to create modular components for a portable handheld gaming system. This way novices can assemble any models they want to use and essentially “snap” them together to quickly prototype. The Fusion 360 project file with all the sketches step by step instructions for creating the model (so that you can easily modify it). This is released under the public domain license so you can use it for reference, modify, or incorporate it into your project and sell it.
Fusion 360 project file:http://a360.co/2hgJZIF
I bought mine on Aliexpress, but here’s an amazon link to the screen.https://www.amazon.com/Elecrow-RPA05010R-800×480-Display-Raspberry/dp/B013JECYF2 -
Shuriken Hand Spinner 3D Print Model
Summary
Shuriken hand spinner. bearing 608 + 7 balls 9.5mm (3/8 inch)
How I Designed This
Fusion360 -
ADT Night Alarm Cover 3D Print Model
Summary
The alarm panel in the bedroom is really bright at night and I always end up covering it with an item of clothing. So I decided to make a better fix for this problem. The cover is for an ADT alarm screen and only covers the screen so the buttons are still usable. The design is made to wedge in the sides as there is no top lip above the screen to latch too.
Hope this makes your room darker like mine and you get a better night sleep. 🙂
The print on high quality took 25 mins.
Print Settings
Printer:
Raise N1 Rafts:
Doesn’t Matter Supports:
No Notes:
Very quick print -
door handles 3D Print Model
Summary
i make 4 door handle to use on drawers
in french
j’ai réalisé 4 poignées pour des tiroirs
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
15%
