Summary
Raspberry Pi Zero (W) Mount Bracket for Anet A8.
Remove the top two main board screws on the Anet A8 and replace the plastic distances with this mount bracket. Use four M3x8mm screws to secure the Raspberry Pi Zero to the mount bracket.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
20%
Author: Thingiverse
-
Raspberry Pi Zero (W) Mount Bracket for Anet A8 3D Print Model
-
StonePot 3D Print Model
Summary
JustAnotherPot
Everything is ready to scale and print, please do not forget to follow us in instagramhttps://www.instagram.com/wireframemx/
Greetings! -
MPCNC cable chain connector 3D Print Model
Summary
I made this to hook up the cable chain to the axis itself.
Connecter i use for the chain: https://www.thingiverse.com/thing:14562 -
Xlr Holder 3D Print Model
Summary
Holds a xlr to an ambient boom pole or vdb boom pole. clamps on with a 3 mm nut and bolt -
Tarmogoyf Dice with 8 face 3D Print Model
Summary
Tarmogoyf Dice. You will now be able to track his power/life. (As describe by my friend Alex, since I don’t know much about this myself)
The dice is easy to print, with shallow and smooth numbers making the support easy to remove, my support stayed on the print bed. Print with support in the shown position to avoid getting one face with a different finish, brim will help the support stays in place..
Print Settings
Printer:
Anet A8 Rafts:
Yes Supports:
Yes Resolution:
.1 Infill:
40%, to get some weight Notes:
On my setup, the dice is a little bit rounded on the opposite side of the fan at the start of the print. This is a case where a better fans duct would help, otherwise reduce speed, or print 2 at a time to let the plastic cool down.
Post-Printing
I would put some drops of paint (or nail varnish ?) in the number and wipe excess to get the numbers more visible.
How I Designed This
Designed in tinkercad, using Octagon shape generator with settings to the extremes to generate 2 pyramids and a middle plate. Letters are 0.5mm deep. -
PCB Vise 3D Print Model
Summary
This is a PCB vice.
The base can be screwed down for better stability.
The top can be tilted up or down. The hex stem can be rotated move the clamp without having to move the base.
Printed parts:
PCB_clamp_base x1
PCB_clamp_stem x1
PCB_clamp_center x1
PCB_clamp_end_piece x2
PCB_clamp_face x2
PCB_clamp_knob x1
PCB_clamp_knob_big x2
Purchased Parts:
Hex screw 1/4 x 20 x 6″ x2
Carriage Bolt 1/4x20x3.5″ x2
Carriage Bolt 1/4x20x1.5″ x1
Hex Nut 1/4×20 x10
Hex Nylon Lock Nut 1/4×20 x2
Wing Nut 1/4×20 x1
Print Settings
Printer:
Tronxy X3A Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
20% Notes:
Brim was used on the stem, clamp faces, knobs
Post-Printing
Instructions:
Insert a hex nut into the hex shaped hole in each of the clamp faces. It can be heated and pushed in or “plastic soldered” for a more permanent fit. These will be used to move the clamps.
The 6″ hex bolts, along with the hex nuts, are used to space the parts. The nylon lock nuts are used at the end so they won’t fall off.
The small knob is used on the carriage bolt that attaches the clamp center to the stem.
The bigger knobs are attached to the carriage bolts that move the clamp faces.
The knobs should be a press fit into the bolts.
See the pictures for how to assemble. One pic shows the nuts loosened, another shows it with everything tightened up.
How I Designed This
This was designed using Design Spark.
Due to the threads on the bottom screws, and the off center drive, the movement of this isn’t very smooth. -
Water bomb balloon container 3D Print Model
Summary
Contenedor de bomba de agua para proyecto de la asignatura de Bionica, Diseño Industrial en la Universidad de Chile.
How I Designed This
Software: Autodesk Inventor 2016
Parametric modelling throught Autodesk Inventor software -
lion face (lithophane) 3D Print Model
Summary
lion face lithophane (stl file)
Print Settings
Printer:
monoprice select v2 Rafts:
Yes Supports:
No Infill:
100 Notes:
layer height (mm) 0.25
shell thickness (mm) 0.80
bottom/top thickness(mm) 0.30
fill density(%) 100 or 112
print speed (mm/s) 24
printing temperature (c) 201
bed temperature (c) 70 -
Kossel Clear OctoPrint Pi camera case mount for 2020 extrusion 3D Print Model
Summary
This is a Kossel Clear OctoPrint Pi camera case mount for 2020 extrusion.
Print Settings
Printer:
HE3D K200 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.3 Infill:
15% -
Tevo tarantula X Drag chain ends 3D Print Model
Summary
This drag chain ends are made to fit the Tevo Tarantula stock x carriage.
You can add connectors to easy connect a sensor or a layer fan with ribbon cables. It can be used for the heatsink fan and the thermistance. I haven’t checked if it could support the amperage of the hot end.
Fusion 360 file attached, feel free to use it !
Post-Printing
Materials Needed
You can find the chain on Amazon :https://www.amazon.com/TOOGOO-Plastic-Towline-Cable-Chain/dp/B00KBPQIBE/ref=sr_1_2
Or Aliexpress :https://www.aliexpress.com/item/Free-Shipping-10-x-20mm-10-20mm-L1000mm-Cable-Drag-Chain-Wire-Carrier-with-end-connectors/32733132867.html
the connectors (2X2pin & 2X3pin):https://fr.aliexpress.com/item/KF2510-Kits-50-sets-Kit-in-box-2p-3p-4-pin-2-54mm-Pitch-Terminal-Housing/32698994359.html
and ribbon cable (22awg is fine for layer fan and sensors, don’t use it for the hot end) :https://fr.aliexpress.com/item/20-meters-5Pin-Extension-Electric-Wire-Cable-Blue-White-Red-Green-Black-Led-Connector-For-RGBW/32220197329.html -
Earphones organizer 3D Print Model
Summary
My first version of earphones case.
It’s just a beginning of my 3d journey:) -
ATARI ST GOTEK MOUNT 3D Print Model
Summary
So, I wasnt happy that a GOTEK requires extender cables to fit inside an atari ST….
I designed a casing for it that does NOT require extender cables and a version that can take the OLED screen too
There is a retainer for the screen that simply slides into place holding the screen firmly.
Both these should not require any case hacking either…….
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
20% Notes:
No special printing requirements except dimensional accuracy -
Pipe 40mm insect blocker valve 3D Print Model
Summary
For pipe 40 mm
Print Settings
Printer Brand:
RepRap Printer:
RepRap Ord Bot Hadron Rafts:
No Supports:
No Resolution:
0,325 Infill:
15 Notes:
Slic3r => Print Settings => Advanced => Other => XY Size Compesation : -0.125
Post-Printing
Finishing
Drill with 2mm drill bit
Use wire 2mm to mount -
Fishbone Flex Pendant 3D Print Model
Summary
Flexible fishbone pendant
85 x 30 x 4mm
30min print
Print Settings
Printer:
k8200 -
TL-Smoother BIGTREETECH extruder mount Wanhao i3 Plus 3D Print Model
Summary
This is a BIGTREETECH TL-Smoother mount for the Wanhao i3 Plus.
One of the files includes, in which I recommend, the previous filament guide I had designed.
You can use the “no guide” version included but the filament will drag the mount more.
Check out instructions for filament guide here https://www.thingiverse.com/thing:2349460
This seems to take away some Z height. I usually don’t print very high so it is not a problem.
Print Settings
Printer Brand:
PowerSpec Printer:
Duplicator I3 PLUS Rafts:
No Supports:
No Resolution:
0.20 Infill:
20% -
Laser Cut Lake Tahoe 3D Print Model
Summary
I designed this as an engineering project at school. I worked on this project with my group for about a month. I used Fusion 360 and mainly the spline tool to trace out an outline of each layer in Lake Tahoe. The final product came out very nicely and we made two different models. One model using wood and the other with cardboard. We used paint to give the lake some color and a spray of clear coat to make it shine. We also used wood stain on the top layer to create contrast between the water and land.
The neat thing with making this lake is that you can customize it:
You can cut as many or little layers as your want
You can cut it out of different materials
You can make it as big or as small as you like
You can add different land/water features (Nevada/Cali border, forests, lakes, streets, water depth) -
Datsun Engine (made for 1/64 scale) 3D Print Model
Summary
This is an engine which I designed to go into 1/64 model cars. Do note that by increasing the size of this, the quality may not be on par with the size of the vehicle intended for instillation. This engine fits almost perfectly in the M2 Machines Auto Japan Datsun 510 Bluebird. I cannot guarantee that it will fit perfectly in every single 1/64 510 Datsun.
Print Settings
Printer:
Monoprice Select Mini Rafts:
Yes Supports:
Yes Resolution:
.06mm Infill:
50 -
Perfiles Perfil 20×60 by Ivys Sousa 3D Print Model
Summary
Printable profile for projects or tests, modeled using actual values and measures of a common profile.
Tip of use:
Testing joints and screws
Do structure tests
Angles, Feet, Stands, Snaps, Anything
created by Ivys Sousa
Perfil imprimível para projetos ou testes, modelado usando valores e medidas reais de um perfil comum.
Dica de uso:
Fazer teste de junções e parafusos
Fazer testes de estrutura
Cantoneiras, Pés, suportes, encaixe, qualquer coisa
feito por Ivys Sousa -
Solder Station Tip Mount (Zeny 862D+) 3D Print Model
Summary
A remix of infectedfpv26’s soldering station mount. I’ve resized everything to fit on the ZENY 862D+ station. -
Front panel 2mm lower USB/SD slot 3D Print Model
Summary
I remixed this front panel to be used with the X Gantry support since I do not use a side panel at all after installing this heat bed wiring mod.
What I did was completely remove the factory metal side panel, then I printed the X Gantry support (In the remix list) and the spacer I designed. To cover the front side section, I printed the front panel which has the USB and SD card slots lowered 2 mm to accommodate the mod listed above. -
Creality CR-10S Control Box Fan Holder 60mm for NOCTUA NF-A6x25 3D Print Model
Summary
Creality CR-10S Control Box Fan Holder 60mm for NOCTUA NF-A6x25
Remove the right thing of the OEM Fan Holder carefully to install this part.
Print Settings
Printer:
CR-10S Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.15mm Infill:
40% -
Mini Ammo Can (Survival Tin) 3D Print Model
Summary
Cute little Ammo Can that works just like the real thing lol, You can probably use it for .22LR Ammo or a mini survival Can. Print D & E twice, My print looks terrible coz my fan went kookoo. I’m reprinting it again 🙂
ITEMS REQUIRED:
1 X Wire Coat Hanger
4 X M3 screws X 10mm L
!Note Print E @ 97%
!Don’t forget to check out my other designs and Follow my weekly KooKoo uploads, Enjoy 😉
Print Settings
Rafts:
No Supports:
No Resolution:
0.2 Infill:
50% Notes:
6 Shells -
Cusomizable Hair Comb 3D Print Model
Summary
I printed in PLA with my dual extruder FlashForge Creator Pro.
I curved it in one step just by prying it off the build plate while it was still warm and bending it around a bowl.
I think I might have to print something to help with the bending, hold the pins in place and have a nice curve to bend it over. -
Quick load Spool Holder 3D Print Model
Summary
I designed this to take away the rockin’ filament roll sometimes experienced during prints with lots of retractions. With a perfectly sized spool holder, the spool can’t rock just roll. This can go in conjunction with the custom spool holder I made for my cheap HICTOP printer. One can easily lift from shelf and place on printer with no fiddling around. If you are interested, check out the models for my printer mounted spool holder which accepts these spools. If the correct size spool you need is not here, you can use the SolidWorks file to create the size you need. If you don’t have access to such software, just leave a comment stating the filament brand and exact hole size and I will be happy to upload.
Print Settings
Rafts:
No Supports:
No Resolution:
0.3 Infill:
15% Notes:
I setup multiple processes and print the pieces for the holder hollow with 1mm walls and find them plenty strong enough. I print the retainer knobs with 35% infill -
Small Jewelry boxes 3D Print Model
Summary
Experimenting with metal planting leaves and shells, I needed some small boxes for the final jewelry.
The boxes close to at tight fit to keep the lit on.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.20mm Infill:
20% Notes:
2 perimeters, 2 bottom and 3 top layers.
Models on photos is printed in PET, but use the filament of your choose. -
Nerf Kronos Picatinny Rail 3D Print Model
Summary
My remix of tungstenexe’s rival picatinny adapter. The changes I made: tightened the section that grips the rival rail, cut a slot so the stock sights are still visible under the adapter, added holes and slots to accept 4-40×1″ screws and nuts.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
15% Notes:
printed in MakeShaper red PETG -
Bunk Bed Posts 3D Print Model
Summary
The original would not lay flat. I have cut off a bit of the model and rotated it to the proper orientation. This model is to be used with Curufin’s bunk beds.https://www.thingiverse.com/thing:1449333 -
Thesis Project Fossil STL 3D Print Model
Summary
Masters Student Project, University of Melbourne -
Small Bathroom Rack, Round Edges 3D Print Model
Summary
Small bathroom rack with holes in it to keep things dry and prevent mold from forming. This one is with all rounded edges for easier cleaning. -
Mounting Bracket for Banggood Temperature sensor and fan control switch 3D Print Model
Summary
This is just a simple bracket to mount a Banggood temperature sensor and fan control switch I am using to monitor the temperature inside my CR-10 enclosure. It has a relay that can turn on a fan (non-PWM) base on the trigger temperature.
Link to the Banggood temperature sensor https://www.banggood.com/DC12V-50-110-Degree-LED-Digital-Thermostat-Temperature-Control-Smart-Sensor-Switch-p-1143380.html -
MKS GEN L V1.0 Prusa i3 MK2 / MK2s Case 3D Print Model
Summary
I edited using Fusion 360 and already printed for my self. I its work for you too.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
15 -
2020 Aluminium double socket for M5 bolt 3D Print Model
Summary
This is a double socket for 2020 aluminium extrusion -
Soap holder 3D Print Model
Summary
It is just a tray used for holding the soap when needed and prevents water from touching it.
How I Designed This
Idea
I realized I needed a simple and beautiful soap holder so I decided to make my own. With a lip to easily grab the soap and a tray to prevent water from sticking to the soap it is brilliantOverview and Background
Requirements
Just print it and scale up the size to the size of soap you want
Materials Needed
Materials
-Just a spool of filament
-3d printer as well (Obviously) -
Alcatel One Touch Idol OT-6030D Minecraft Case 3D Print Model
Summary
Per request from my son, I remixed the case to have Minecraft logo and pickaxe and a creeper. Enjoy.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Yes Supports:
Yes Infill:
20 Notes:
You have to print it backwards with support. It takes 3 hours and it uses more materials, but the finish is the best. So the Minecraft logo has to be on top, not bottom. -
Christmas ornament for Simple Modular Tea Light 3D Print Model
Summary
A few simple designs built for my Simple Modular Tea Light design. These were designed as gifts for friends and family. If you make one, I would love to see. Please post makes and remixes to share with the community.
Print Settings
Printer:
Raise3D N2 Plus Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.20 Infill:
.25 Notes:
The “Gem” design prints fairly well without supports, but, for me the “Halo” one needs them to turn out well. -
Votive Holder for Simple Modular Tea Light 3D Print Model
Summary
A simple votive built for my Simple Modular Tea Light design (Candle version 1). If you make one, I would love to see. Please post makes and remixes to share with the community. -
Alien Head Wall Hanger 3D Print Model
Summary
Alien Head Wall Hanger
Not yet printed
Command strips, no nail holes -
Shimano/Maglock Cleat Adapter 3D Print Model
Summary
This is an adapter to allow large longitudinal (fore/aft) adjustment of the pedal-axle relative to the foot when using a Shimano SH-RP5 bike shoe with a Maglock Stealth magnetic pedal system. Via recent research showing benefits from using a more aft position of the pedal’s axle relative to the foot, the opportunity to experiment with a large range of fore/aft foot position may yield comfort and power advantages.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator (5th Generation) Rafts:
Yes Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
35% Notes:
Omitting supports causes pretty rough printing of the low-angle overhang region, but this doesn’t seem to affect functionality (this is a purely functional piece after all). -
Large Outdoor Cat House 3D Print Model
Summary
The original SketchUp file is included so you can get all dimensions and angles for recreating this yourself or make modifications as you wish.
The inside dimensions are about 34″x18″. This perfectly fits the common heating pad made by K&H Manufacturing found on Amazon.
The front window takes a 6.5″ square piece of 1/4″ glass or plexiglass. It slides in from the bottom and the bottom window molding screws onto the house from the inside using a 1.25″ long wood screw.
The entire house is constructed out of 1″ thick boards, except for a few 2″x2″ boards.
The front door is sized for a large cat (15 lbs). If your cat is smaller, you can subtract 1″ from the opening width and height.
The roof is attached using a 3′ long continuous hinge (pictured). I highly recommend stainless steel for the hinge and the wood screws. -
new chain mail mesh 3D Print Model
Summary
no supports needed. scalable. mesh2v3 is a grouping of the individual links. editable in fusion 360 to change the shape of the plates
Print Settings
Printer:
3d Platform Workseries Supports:
No Resolution:
0.15 or higher Infill:
10% min Notes:
please share any completed or modified prints -
Balcony Pot Plant Holder 3D Print Model
Summary
My girlfriend likes plants. She got a bunch of bread pans that we liked the aesthetics of. due to restricted balcony size i came up with these brackets. the first version allows you to hang one, while the second allows to hang one while placing the second one on top.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.25 Infill:
100 Notes:
took about 1h30m for the 2 to print -
DIY/Benbox Chinese laser bracket/mount 3D Print Model
Summary
I made this because the best height for my laser was having it raised to this point. I also dislike the acrylic parts, and wanted some color. I used one of the bracket packages on here, and reworked to fit this. It also adds some rigidity to it. Enjoy!
Print Settings
Printer:
Creality CR-7 Rafts:
No Supports:
Yes Resolution:
.25 Infill:
20% Notes:
It takes about 4 hours on my machine, but I have 2 others to print other stuff with. I did use a 10 pass brim to aid in adhesion. Printed with Inland PLA, Peak Green. -
#TealDroneChallenge Toy Brick Mount 3D Print Model
Summary
This simple yet intuitive design lets anyone with a teal drone to customise their drone themselves.
Just add any compatible toy bricks and let your creation soar.
This adds different aesthetics to the drone, allows things to be mounted to it and will fulfill childhood memories of making your creations fly.
(just a side note:) Thank you teal for the competition and i hope you consider choosing my design for the grand prize. -
hockey stick extender 3D Print Model
Summary
Hi, I had to extend hockey stick for my daugter – so I made this extender. Meant to fit in bauer total one kids
Print Settings
Notes:
put on the bed on the widest part of the extender. printed with PLA 0.3 mm -
Jeep Grand Cherokee Key Fob Repair 3D Print Model
Summary
My Key fob for my jeep broke a while ago… good thing i bought a 3D printer.
Should fit snugly, just add some glue. -
Webcam mount for 2020 rail. 3D Print Model
Summary
I made this mount to mount a cheap YoLuke webcam from Amazon on my 3D printer. The printer has an Octopi setup on it and I wanted to be able to check up on prints for anywhere in the house.
Hardware needed:
Reused the hinge pin from the Webcam
2 x 3mm x 8 screws
2 x 3mm t slot nuts.
Print Settings
Printer:
Tronxy X5S Rafts:
No Supports:
No Resolution:
.2 Infill:
25 -
Lithophane Stand with Candle Holder 3D Print Model
Summary
This is a stand that holds a lithophane and a candle to make it glow. To make the lithophane, go to http://3dp.rocks/lithophane/
Settings for Lithophane:
Main page – Outer Curve
Image Settings – Positive Image
Holds a standard tea candle. Fit can be a little tight on some of the lithophanes, a little sanding makes it fit fine. Plus you can swap them for different images whenever you want!
Pretty new to 3D printing, so I’m open for feedback!
Hope you all like it!
Print Settings
Printer:
Monoprice MP Select Mini Rafts:
No Supports:
No Infill:
20 -
Darth Turkey 3D Print Model
Summary
Even the dark side enjoys Thanksgiving. Enter Darth Turkey! This model was inspired by a school craft my nephew brought home. I used Meshmixer to combine 3 other projects.
Silly little turkey modelhttps://www.thingiverse.com/thing:1124349
Darth Vader Key Fobhttps://www.thingiverse.com/thing:860156
Lego Minifig Darth Vader Chest platehttps://www.thingiverse.com/thing:580394
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.10mm Infill:
15% Notes:
To get the multi-color effect, I changed the filament a few times during the print.
0.0 Vertigo Grey
4.1 Silver
10.0 Vertigo Grey
10.5 Black
Note: These values would only work if printed at 100% scale and 0.10mm resolution. -
Geoboard isometric 3D Print Model
Summary
Geoboards Are essential to teach children the concept of Area and multiplication
Print Settings
Printer:
Dremel Idea Builder Rafts:
No Supports:
No Resolution:
0.3 Infill:
10 Notes:
takes 6 hours to print -
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC 3D Print Model
Summary
button MICRO WAVE COMBINED FEATURED DX 24 WHITE
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC
Print Settings
Printer:
Discoeasy 200 Rafts:
No Supports:
Yes Resolution:
0.08 Infill:
50% -
NOW 3D Print Model
Summary
Just a Now’Clockhttps://stealtimeback.com/
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
No Supports:
No Resolution:
0.2 Infill:
normal Notes:
Easy to print, with change filament option / PAUSE function > on the NEVA 3D printer. -
Dicey Peaks Board Game 3D Print Model
Summary
Dicey Peaks is a tile and dice game of exploration and risk-taking, featuring a balance of luck and crucial decision-making as players race to be the first to reach the flag at the summit of Yeti Mountain! I have given you a choice from two dice styles. -
tattletail 3D Print Model
Summary
This tattle-tail from tattle-tail
I used 123d design to make the solid form and blender to sculpted the face and details
How I Designed This
I used 123d design to make the solid form and blender to sculpted the face and details -
Sainsmart Logo Keychain 3D Print Model
Summary
I just found out a won a Sainsmart T-shirt and designed this to celebrate! When I sent Sainsmart the pic on instagram, they requested I put it up on Thingiverse and here we are!
I designed this to be printed in Sainsmart TPU in dual color, as seen in my picture. The layers stuck really, really well! In fact, they may be bonded even better than layers of the same color!
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
0.1mm Infill:
15-25% Notes:
I print at 220C/50C on glass with AquaNet. My initial layer height is 0.2mm and my layer height is 0.1mm. My top and bottom layers are 0.8mm thick (8 layers). I print around 20mm/s with the fan at 100%.
How I Designed This
Designing a Keychain (Fusion 360)
Simply find the logo you wish to design, save it, and open Fusion. Now go to the “insert canvas” option and insert the image. Next, trace it with the tools in the sketch tab (I like arches, circles, lines, and conic curves with roh set to 0.5). FInally, extrude whatever you want to be printed and add a small ring for your keychain! -
Evangelion Head Input 3D Print Model
Summary
Designed in tinkercad, you will need a 5cm brooch as you can see in the pictures
Print Settings
Printer:
Tronxy X3 Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
25%
Post-Printing
paint with black and white -
100Hex Twirl 3D Print Model
Summary
Hexagon for 100Hex https://www.thingiverse.com/thing:2477471
Other hexagons at https://www.thingiverse.com/thing:2612800
Print Settings
Printer:
Anet_A8 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% Notes:
Nozzle 0.4mm
Layer height 0.2mm -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels and added mounting holes. -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels, and added mounting holes. -
3.5 Inch Wheel Chocks With mounting holes. 3D Print Model
Summary
I took Fireflynj wheel chocks and added mounting holes. -
placa en relieve 3D Print Model
Summary
placa en relieve
Print Settings
Printer:
hephestos Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% Notes:
placa en relieve
How I Designed This
placa en rellieve -
Hand Rail Bracket Hook 3D Print Model
Summary
This hook slides overtop of your handrail bracket. It provides great storage on the stairs for bags you need take on the go!
I scaled these hooks to my handrail brackets, but they should work fine if you scale them up or down to fit your handrail bracket sizes.
Holds up to 15 LBS!
Print Settings
Infill:
100 Notes:
I would recommend 100% infill if you have something heavy to hang.
I have tested this with up to 15 LBs and it holds it fine when using 100% infill.
How I Designed This
TinkerCAD.com -
Halo Chain Gun Turret 3D Print Model
Summary
Cut of the Halo warthog chain gun. https://www.thingiverse.com/thing:2638418
You could add this to other custom makes or toys. -
Oval rail end cap 3D Print Model
Summary
I used 115mm x 43mm oval “cattle” rail to make roof racks for the car. I needed to cap the ends to stop wind noise so I designed these.
Cattle rail can be used for all sorts of things apart from fencing and these end caps finish it off nicely.
I use a dab of Trex to hold them in place but you could also use a rivet or screw.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
No Supports:
No Resolution:
0.2 Infill:
100% -
Tormach TTS Tool Tag 3D Print Model
Summary
Print it out and use a sharpie or paint marker to put a tool number on it. Then snap it into the ATC grove of a TTS tool. -
T-Fix insert for n-handle Suex scooter 3D Print Model
Summary
T-fix insert for tho N-handle/Powergrip-handle of Suex DPV´s -
Sandpaper holder 3D Print Model
Summary
You will need some infill if you want a bottom on the model, I use around 20-30% infill
Print Settings
Printer:
Alunar M505 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
20-30 -
Nintendo SNES Cartridge Dust Cover / Storage Sleeve 3D Print Model
Summary
This thing is a storage solution for SNES (Super Nintendo) cartridges. Normally, SNES cartridges don’t stand on their side. This cover fixes this problem so you can store your SNES carts vertically on a shelf conserving space and allowing you to see all your cartridges. This cover is modeled after the classic NES dust cover.
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
Doesn’t Matter Notes:
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”. -
SX350J vape mod with 26650 or 18650 adapter V2. 3D Print Model
Summary
SX350J vape mod with 26650 or 18650 adapter V2.
For YiHi SX350J Boxer mod by Ginger Vaper, just disassemble the mod and transfer everything (except lower battery connector) into this enclosure. This enclosure only use 1 battery (26650 or 18650) so you can charge the battery directly using USB port. -
Box for tea bugs 3D Print Model
Summary
I am baying big package of tea (100 bugs) and this big box looks on my table is not good.
I made small box for tea bugs.
Use PLA plastic or harmless for food.
Print Settings
Printer:
Anet A6 Rafts:
No Supports:
No Resolution:
0.2 Infill:
10 Notes:
PLA -
Mario Odyssey Spinner 3D Print Model
Summary
A Mario Odyssey spinner! Not much more to say other than this: Odyssey is awesome! Almost as good at 64 and Sunshine. Perhaps even just as good as those two. -
Jarl – Vikings Tile Laying Game 3D Print Model
Summary
In the long winters between raiding seasons, warriors keep their intellect sharp through games of wits and chance in this game of stone placement filled with tactics and subtle maneuvering for victory.
Jarl – The Vikings Tile Laying Game is powered by The Duke game mechanic.
Players move their warriors (tiles) around the board and flip them over after each move. Each tile’s side shows a different movement profile. If you end your movement in a square occupied by an opponent’s tile, you capture that tile. Capture your opponent’s Jarl to win! -
Ikea Lack Table Filament Guide 3D Print Model
Summary
Build this as a filament guide through a 1/4″ hole I drilled in my Ikea Lack Table for filament.
You can view and/or download the source file from here
The exterior diameter is 4.5mm while the interior is 3mm (good for 1.75mm filament, which is my use case)
I plan to make a better version of this soon, but this is currently what is fitted in my setup until after the holidays.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 Layer Height Infill:
100% -
rj45 dual breakout board mount for maker713 light for ft-5 3D Print Model
Summary
ive tested this and the belt moves freely behind the bracket and the breakout board is still mounted below for clean wiring
Print Settings
Rafts:
No Supports:
Yes Resolution:
.2mm layer height -
Soxtenor ( sostiene celular ) 3D Print Model
Summary
soporte para cargar tu celular- cuida tu celular de caídas bruscas en tu mesa de moche o peinador
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Infill:
PLAStandards
NGSS
-
Poly Phone Stand 3D Print Model
Summary
This Phone Stand is made with Poly. The first bio, portable,multi-tool and battery powered 3dprinter.
Newsletter >>> https://www.poly3dp.com/newsletter-signup/
Print Settings
Printer:
Poly Rafts:
No Supports:
No Resolution:
0.2 Infill:
15 -
Trash Compactor Knob 3D Print Model
Summary
bought a trash compactor at a Habitat For Humanity ReStore, and it came with out a knob, so i made one up real quick.
this fit a bit tight with my printer, but it works flawlessly in the compactor.
you may have to fudge the dimensions a bit, or do some post-processing to get it to work.
it does need supports to print this.
i printed it with the knob face down, and supports for the overhangs. -
Business & Shop Sign Pack 3D Print Model
Summary
Business/Shop Sign Pack
3D Signs don’t fade away like Painted ones!!!
All Modelled to have a 1/8″ thick Base Plate.
All modelled to be ~3/8″ height overall.
Item is not For Sale, Royalty Free.
[ Do Not Sell nor Re-Distribute my Work ]
[ & Don’t be a Punk, and try to Claim my Work as your Own ]
[ reguardless of your Ignorance of the Fact ]
If someone wants to make this item, give them the Link to download these files.
No one is permitted to Sell or Redistribute anything of Mine. Ever.
Nor are you allowed to Print my Works, and Sell them. (Monetary Gain is not Permitted)
You’re Welcome, for All that is I.
Do not Abuse this Privilage. -
Chemistry Ring stand adapter 3D Print Model
Summary
We’re doing marble runs, and instead of books and rulers, I made adapters to fit the foam pipe insulation for copper pipe to the chemistry stands. It looks pretty good and works well.
102% gives a nice fit that can be moved easily, 100 percent fits but TIGHT!
Probably not too useful since plain old masking tape or zip ties could do the same thing, but whatever, the students were impressed.
Print Settings
Infill:
10-20% Notes:
Works best at 102 percent. -
Misc Plaque Pack 3D Print Model
Summary
Miscellaneous Plaques
All Modelled to have a 1/8″ thick Base Plate.
All modelled to be ~3/8″ height overall.
Item is not For Sale, Royalty Free.
[ Do Not Sell nor Re-Distribute my Work ]
[ & Don’t be a Punk, and try to Claim my Work as your Own ]
[ reguardless of your Ignorance of the Fact ]
If someone wants to make this item, give them the Link to download these files.
No one is permitted to Sell or Redistribute anything of Mine. Ever.
Nor are you allowed to Print my Works, and Sell them. (Monetary Gain is not Permitted)
You’re Welcome, for All that is I.
Do not Abuse this Privilage. -
MRM Reaper VTX Mount 3D Print Model
Summary
Multi Rotor Mania (MRM) Reaper VTX antenna mount designed for TBS Unify Pro. I have two designs. The first one I did has the antenna pointing up slightly for better antenna orientation during flight and second one points down and under the blades for better protection from gate strikes. Photo is the down position version. I also added a tab to zip tie the battery leads out the back and help protect the solder pads of the FC/PDB during a battery eject crash 🙂
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
30%
Post-Printing
Your will need to clear out the holes for the stand offs. I used a #8 drill bit for this. -
Hobby Lobby Hunter/Tornado suspension arms 3D Print Model
Summary
Longer suspension arms for the Hobby Lobby Hunter & Tornado RC cars from the early 80’s.
Front and rear track will go up 60mm total.
The front A-Arms have print in place ball joints. Before use, rotate the ball 180 degrees. The cup in the ball is designed to firmly hold the front axle knuckle king pin pivots.
Zero caster and camber.
Upper arms were designed to maximize shock travel and angle within the space provided. This created a much more damped feel, but you will probably need to adjust your spring perches.
Lower arms were designed to accept anti roll bar end links.
Rear upper arms were designed for equal length suspension.
Bump stops are setup for ~40 degrees total movement. ~20 degrees at max droop and compression. This should help keep the dog bones from popping out and for sure will keep them from binding against the drive cups.
As much as possible, all hardware is reused but you will need to source a few things.
Required parts:
4x HPI Dogbone #101064. But any dogbone that is 90mm long from center to center, and has 8mm drive balls will work.
Longer steering links
8x M3 x 18mm screws
8x M3 nylock nuts
I’m fairly certain, like 99%, that these will bolt right up to a Robbe Pantera, Serpent Cobra, and Graupner Hunter.
I’m 100% certain these will bolt right up to a Skyward Labs Mean Mudder. -
Hobby Lobby Hunter GoPro mount 3D Print Model
Summary
GoPro mount that bolts to the roll cage of a Hobby Lobby Hunter.
Required hardware:
2x M3 x 10mm bolt
2x M3 nylock nut
