Download Free 3D Model Nintendo SNES Cartridge Dust Cover / Storage Sleeve 3D Print Model

Summary
This thing is a storage solution for SNES (Super Nintendo) cartridges. Normally, SNES cartridges don’t stand on their side. This cover fixes this problem so you can store your SNES carts vertically on a shelf conserving space and allowing you to see all your cartridges. This cover is modeled after the classic NES dust cover.
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
Doesn’t Matter Notes:
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.