3d model of landscape with diffuse normal and height map
Tag: dust
-
SSh-36 Helmet USSR 3D Model
HelloThis is USSR helmet called SSh-36 (СШ-36), also known as “Halhingolka”(Халхинголка). About this model:• Two texture options – clean and dusty/rusty• Clean topology – no ngons, poles, flipped polygons or overlapping vertices• Unreal Engine 4 project with all textures and materials applied• Textures in 4K resolution for Unreal Engine 4 (Diffuse+Normal+OcclusionRoughnessMetallic) + 2K textures for Unreal Engine 4 in a separate archive. All Textures are in TGA (targa) format• Non-triangulated models in *.max format with assigned standard materials and textures (Diffuse+Specular+Normal+Glossiness) in 2K resolution• Unity packages. Include meshes, materials and textures (AlbedoTransparency + SpecularSmoothness + Normals) in 4k resolution.• fbx and obj files without textures• Helmet have approximately real dimensions
-
Industrial Cyclone Dust Collector 3D Model
This is a realistic model of the Industrial Cyclone Dust Collector.This model consists of correct geometry,detail and the materials.The model consists of 237 objects.This model is divided into parts. Due to this, you can do editing parts of the model.This model Industrial Cyclone Dust Collector is ideal for photorealistic visualizations.Unpack the format you need and run in 3D editor.I hope you enjoy my work.Thank you.
-
Trash Can 3D Model
Trash Can low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.- Ready for Unity3d and other game engines.- Real world size.- trashCan (diffuse, ambient occlusion, metalness, roughness, normal) 2048×2048
-
Da Vinci Jr _ DaVinci Jr Long Dust Plug 3D Print Model
Summary
I remixed ryanmac1911 filament plug and extended it to cover the long filament tube hole on the davinci jr. I then cut it in 2 pieces to it was printable on the davinci jr. Whenever my printer is not is use I removed the filament tube and cover all the holes on the top to keep the inside of my printer dust free!
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci Jr. 2.0 Mix
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15% -
EV J1772 Type 1 Connector Dust Cap – Various types 3D Print Model
Summary
Hey guys,
First design here after using many from here! After I couldn’t find a design I liked for a dust cover cap for my Type 1 lead I decided to design my own. Although my lead is normally partially covered I would find sometimes after heavy rain my external charger would trip, I assume due to moisture in the connector. Having recently got a 3d Printer (Anet A8) I figured I would make my own!
I have 4 .stl files here:
1 – EV Type 1 Connector Cap: bog standard cap, with no real way of securing it anywhere.
2 – EV Type 1 Connector Cap with hole: same as above but contains a loop hole to attach to the lead. My initial thoughts was to use an elastic band to attach it
3 – EV Type 1 Connector attachment: For use with 2). Is simply a connector long enough to attach it to most leads
4 – EV Type 1 Connector Cap with connector: A cap with no loop, instead with the connector already attached. This is what I’m currently using in the pictures above.
All 4 are pictured above
Printed using TPU filament, so it has a little give whilst attaching it. Its a nice snug fit on the end, which means it doesn’t come off when you try shaking it.
All feedback is welcomed, hope you like my design!
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
Printed at 180 degrees, without retraction. 30mm/s print speed, 15mm/s infill speed and 150mm/s travel speed. Print cooling enabled and set to 90%. No supports and only a Skirt of 3mm -
Dustpan 3D Model
Brush Broom Dustpan dust pan rubbish sweep clean dirt cleaning tool utensil scoop maid chore trash home set collection
-
Kobalt Miter saw Dust Channel 3D Print Model
Summary
Used for better duct collection on a Kobal 12″ miter saw. Available in shot and long version. Photos are the short version.
I used double sided sticky tape to attach it to the saw, even though it is a snug fit. -
Libman Broom 3D Model
Libman Broom Dustpan dust pan rubbish sweep clean dirt cleaning tool utensil brush scoop maid chore trash home set collection
-
Grainfather Dust Cover 3D Print Model
Summary
I wanted a cover for my Grainfather homebrew system. I understand why the cover is open, but wanted something to keep dust out of it when it was not in use and being stored. This inserts into the class top and is low profile so that it won’t add much height if your storage space is limited. -
Dustbin 3 Lowpoly Old 3D Model
This is a model of a Dustbin.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, advertising, design visualization, real-time, video game etc.|| SPECS ||This model contains 2 separate objects.This model contains 1584 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| TEXTURES ||Textures have 8 bits per channel.Dustbin_3_Lowpoly_Old_BaseColor.png 1024×1024.Dustbin_3_Lowpoly_Old_Metallic.png 1024×1024.Dustbin_3_Lowpoly_Old_Normal.png 1024×1024 X+Y-Z+.Dustbin_3_Lowpoly_Old_Roughness.png 1024×1024.paul_lobe_haus_1k.hdr 1024×512.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats. May be needed to reassign textures and will not render like the preview images.-FBX-OBJ
-
Dustbin 3 Lowpoly 3D Model
This is a model of a Dustbin.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, advertising, design visualization, real-time, video game etc.|| SPECS ||This model contains 2 separate objects.This model contains 1192 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| TEXTURES ||Textures have 8 bits per channel.Dustbin_3_Lowpoly_BaseColor.png 1024×1024.Dustbin_3_Lowpoly_Metallic.png 1024×1024.Dustbin_3_Lowpoly_Normal.png 1024×1024 X+Y-Z+.Dustbin_3_Lowpoly_Roughness.png 1024×1024.paul_lobe_haus_1k.hdr 1024×512.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats. May be needed to reassign textures and will not render like the preview images.-FBX-OBJ
-
Dustbin 3 Textured Old 3D Model
This is a model of a Dustbin.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, high-res film close-up, advertising, design visualization etc.|| SPECS ||This model contains 7 separate objects.This model is intended for subdivision.This model contains-Subdivision level 0 – 6692 polygons.-Subdivision level 1 – 26736 polygons.-Subdivision level 2 – 106944 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Uses subdivision level 2 model.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| TEXTURES ||Textures have 16 bits per channel.Dustbin_3_Textured_Old_BaseColor.png 2048×2048.Dustbin_3_Textured_Old_Metallic.png 2048×2048.Dustbin_3_Textured_Old_Normal.png 2048×2048 X+Y-Z+.Dustbin_3_Textured_Old_Roughness.png 2048×2048.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats (subdivision level 0 model included). May be needed to reassign materials and will not render like the preview images.-FBX-OBJ
-
Dustbin 3 Textured 3D Model
This is a model of a Dustbin.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, high-res film close-up, advertising, design visualization etc.|| SPECS ||This model contains 7 separate objects.This model is intended for subdivision.This model contains-Subdivision level 0 – 5380 polygons.-Subdivision level 1 – 21488 polygons.-Subdivision level 2 – 85952 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Uses subdivision level 2 model.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| TEXTURES ||Textures have 16 bits per channel.Dustbin_3_Textured_BaseColor.png 2048×2048.Dustbin_3_Textured_Metallic.png 2048×2048.Dustbin_3_Textured_Normal.png 2048×2048 X+Y-Z+.Dustbin_3_Textured_Roughness.png 2048×2048.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats (subdivision level 0 model included). May be needed to reassign materials and will not render like the preview images.-FBX-OBJ
-
Dustbin 3 3D Model
This is a model of a Dustbin.Originally created with Blender 2.79.|| USAGE ||This model is suitable for use in broadcast, high-res film close-up, advertising, design visualization etc.|| SPECS ||This model contains 7 separate objects.This model is intended for subdivision.This model contains-Subdivision level 0 – 5380 polygons.-Subdivision level 1 – 21488 polygons.-Subdivision level 2 – 85952 polygons.This model contains Blender Cycles materials.|| PRESENTATION IMAGES ||All preview images are rendered with Blender Cycles Renderer.Uses subdivision level 2 model.Product is ready to render.Render setup is included as a separate Blender file, which is needed to produce images that match the thumbnails.|| GENERAL ||Model is built to real-world scale(the unit system is metric).No third-party renderer or plug-ins needed.|| ADDITIONAL NOTES ||Other file formats (subdivision level 0 model included). May be needed to reassign materials and will not render like the preview images.-FBX-OBJ
-
MilitaryShovel Free 3D Model
Military shovel with multiple color and texture sources, Textures exported for PBR (metalicity roughness) and Standard render engines such as VRAY REDSHIFT and MENTAL RAY (gloss, reflection)Comes with 3 different Level Of Detail Models (LOD)Intended for game/realtime/background useComes with clean Geo and UVS and model is readilyy suitable for closeup or far away camera angles.Available File Formats:- Maya Ascii with 3 Level of Detail Models- Maya Binary with 3 Level of Detail Models- OBJ with 3 Level of Detail Models- FBX with 3 Level of Detail Models—————————————————-Polygon Counts :Subdivided Geometry = 35,539 FacesStandard Geometry = 8,957 FacesLOD mid Res = 3,322 FacesLOD Low Res = 1,205 Faces—————————————————-Geometry:Non – manifold geomtery = 0NGons = 0Overlapping Faces = 0Overlapping Vertices = 0—————————————————-Texture resolution = 4096 X 4096Texture format = TGA—————————————————-Model built to real-world scale in CMModel is placed to 0,0,0 scene coordinates.Pivots placed accordingly.LODs are in display layers and grouped for easy selection.All objects properly named.Texture and material names correspond to model name.The model is efficiently UV unwrapped.Contains no overlapping UV’s.
-
Nintendo SNES Cartridge Dust Cover / Storage Sleeve 3D Print Model
Summary
This thing is a storage solution for SNES (Super Nintendo) cartridges. Normally, SNES cartridges don’t stand on their side. This cover fixes this problem so you can store your SNES carts vertically on a shelf conserving space and allowing you to see all your cartridges. This cover is modeled after the classic NES dust cover.
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
Doesn’t Matter Notes:
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”. -
Dusty Wooden Cargo Crates PBR 3D Model
Pack of dusty wooden crates with PBR textures based in real crates. It comes with both specular and metalness workflows. In this pack they have dust like if they would have been stored for a while.-13 crates with 100 to 380 poly. 1 texture set each.-2048*2048 TGA textures including:_difuse_AO_normal_specular_glossAnd_Diffuse (albedo)_Metalness_RoughnessPack includes textures for unity specular/metallic workflows.
-
DW660 Quick Release Dust Shoe with ring for attaching skirt 3D Print Model
Summary
This is a simple remix of https://www.thingiverse.com/thing:410266 which is in turn a remix of https://www.thingiverse.com/thing:231219, a dust shoe for the DeWalt 660.
I found it necessary for our applications on our home brew router to have a skirt. This mix adds a ring in the appropriate place to zip tie a skirt to the dust shoe. It also removes some of the interior plastic that kept causing jams with larger wood chips. I am using 3/16″ thick rubber though vinyl or other materials would work just as well.
This is probably obvious, but print this upright. I realize it’s on its side. That was a side effect of importing it for me.
Good support settings are an absolute necessity on this one due to it having to reach up into the part to support the upper area.
I printed this at low resolution and fast speed. For me this helps with bridging which is handy for the cavity that the pin must travel through. Support doesn’t really work there.
Print Settings
Printer Brand:
Printrbot Printer:
Play Rafts:
Doesn’t Matter Supports:
Yes Resolution:
Low Infill:
20% -
Sony Alpha accessory mount dust cap 3D Print Model
Summary
I’m off on an adventure and thought I’d like a dust cap for my accessory mount. So I made one. Thought I’d share. Designed to print vertically so add a brim. -
Houdini Plumfire Explosion 3D 3D Model
This file comes with two hip files for Houdini and can be used right away. Please make sure you use Houdini 15/16 to get the best out of this explosion. You need to simulate and composite this explosion but you can adjust, change and handle it the way you need, the setup is super easy and good to understand for intermate Houdini users.If you have questions, please watch the tutorials here in the customer area to get an idea how to use it the right way.Thanks for passing by.
-
Houdini Mortar Strike Infantery 3D Model
This ready Houdini strike comes for version 15/16 and can be used right away, to create the explosion you see in the promotion tab.The setup is easy to understand and you can really fast create your own explosions of this style, please keep in mind, you should have a basic understanding of houdini and how you can use it.Please check out the promotional material to see if this explosion fits your need.Thanks for passing by and enjoy this awesome weapon of masscreation.
-
Low Poly Cartoony Planet Rover 3D Model
Fantasy Planet Rover model created in Blender.Materials are done in Cycles Render.* The zip file that is provided has the .obj and .mtl for the materials.File formats: 3ds, blend, obj, fbx, dae,
-
Low Poly Cartoony Planet Rover 2 3D Model
Planet Rover model created in Blender.Materials are done in Cycles Render.File formats: 3ds, blend, obj, fbx, dae,
-
Old Dirty Tire Treads 3D Model
Low poly 3d models of a Old dirty tire treads. Model is ready for game engine use with both Specular/gloss and Metallic/roughness PBR workflow textures.Model is composed of two different tires which share same non-overlapping uv space Tire1 and Tire2. Both tires are different in surface details and size. Both tires have more dirt on top than on bottom. You can make your own stack of tires with these two tires by duplicating. One stack of tires is already provided in file labeled Tires_stack.———————————————This is a low-poly model. This model is Not intended for subdivision.Files Included: Model Format/Software Tires MA Maya 2016 Tire1 OBJ, FBX. Tire2 OBJ, FBX. Tire_stack OBJ, FBX. PLANE (BG plane for marmoset) OBJ Tires_render_scene Marmoset Toolbag 2——————————————— Polycount VertsTire1 1350 675Tire2 1350 675Tire_stack 8100 4050———————————————Textures include BaseColorAONormalMetallicRoughnessDiffuse (AO multiplied)NormalSpecularGlossinessTextures size 2048×2048 and 4096X4096Textures format – PNG———————————————Hope you like it !
