Download Free 3D Model EV J1772 Type 1 Connector Dust Cap – Various types 3D Print Model

Summary
Hey guys,
First design here after using many from here! After I couldn’t find a design I liked for a dust cover cap for my Type 1 lead I decided to design my own. Although my lead is normally partially covered I would find sometimes after heavy rain my external charger would trip, I assume due to moisture in the connector. Having recently got a 3d Printer (Anet A8) I figured I would make my own!
I have 4 .stl files here:
1 – EV Type 1 Connector Cap: bog standard cap, with no real way of securing it anywhere.
2 – EV Type 1 Connector Cap with hole: same as above but contains a loop hole to attach to the lead. My initial thoughts was to use an elastic band to attach it
3 – EV Type 1 Connector attachment: For use with 2). Is simply a connector long enough to attach it to most leads
4 – EV Type 1 Connector Cap with connector: A cap with no loop, instead with the connector already attached. This is what I’m currently using in the pictures above.
All 4 are pictured above
Printed using TPU filament, so it has a little give whilst attaching it. Its a nice snug fit on the end, which means it doesn’t come off when you try shaking it.
All feedback is welcomed, hope you like my design!
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
Printed at 180 degrees, without retraction. 30mm/s print speed, 15mm/s infill speed and 150mm/s travel speed. Print cooling enabled and set to 90%. No supports and only a Skirt of 3mm