The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
Tag: connector
-
BMW i Wallbox Pure 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Old Switch 3D Model
This is a model of an Old Switch- There are no unused vertexes and polygons- This model is low-poly and has PBR textures, so you can use it in real-time renders- This model contains 1 separate objects- No Photoshop or compositing used, product is ready to render out-of-the-box- All textures and materials are included- You can edit textures if you have Substance Painter 2 (The project is included)Textures:- Switch – 4096×4096, . png (Diffuse, BaseColor, Normal, Specular, Glossiness, Roughness, Metallic, AO)
-
Old Switch 3D Model
This is a model of an Old Switch- There are no unused vertexes and polygons- This model is low-poly and has PBR textures, so you can use it in real-time renders- This model contains 1 separate objects- No Photoshop or compositing used, product is ready to render out-of-the-box- All textures and materials are included- You can edit textures if you have Substance Painter 2 (The project is included)Textures:- Switch – 4096×4096, . png (Diffuse, BaseColor, Normal, Specular, Glossiness, Roughness, Metallic, AO)
-
EV J1772 Type 1 Connector Dust Cap – Various types 3D Print Model
Summary
Hey guys,
First design here after using many from here! After I couldn’t find a design I liked for a dust cover cap for my Type 1 lead I decided to design my own. Although my lead is normally partially covered I would find sometimes after heavy rain my external charger would trip, I assume due to moisture in the connector. Having recently got a 3d Printer (Anet A8) I figured I would make my own!
I have 4 .stl files here:
1 – EV Type 1 Connector Cap: bog standard cap, with no real way of securing it anywhere.
2 – EV Type 1 Connector Cap with hole: same as above but contains a loop hole to attach to the lead. My initial thoughts was to use an elastic band to attach it
3 – EV Type 1 Connector attachment: For use with 2). Is simply a connector long enough to attach it to most leads
4 – EV Type 1 Connector Cap with connector: A cap with no loop, instead with the connector already attached. This is what I’m currently using in the pictures above.
All 4 are pictured above
Printed using TPU filament, so it has a little give whilst attaching it. Its a nice snug fit on the end, which means it doesn’t come off when you try shaking it.
All feedback is welcomed, hope you like my design!
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
Printed at 180 degrees, without retraction. 30mm/s print speed, 15mm/s infill speed and 150mm/s travel speed. Print cooling enabled and set to 90%. No supports and only a Skirt of 3mm -
Gardena connector with wall mount 3D Print Model
Summary
Gardena connector for mounting on a wall.
Print with connector upright! (Not as displayed here.)
The model includes support on the nut, but needs support on the rest of the model.
Dry-tested. -
Nebia Shower Wand Connector to 1/2″ BSP Adapter 3D Print Model
Summary
An adapter that changes Nebia’s proprietary shower wand connector to a standard 1/2″ BSP connector.
Note that the water temperature between the Nebia shower head and the 1/2″ BSP output might be significantly different, and there will be reduced water flow.
Use at your own risk.
Print Settings
Rafts:
No
Supports:
Doesn’t Matter
Infill:
100%
Notes:
Print using PETG for safety and durability. -
Coke Bottle Male Connector 3D Print Model
Summary
Plastic bottle male connector for combining various fittings and plugs together.
Download my fitting and combine various parts together to create all types of items.https://www.thingiverse.com/thing:1132995https://www.thingiverse.com/thing:2799255https://www.thingiverse.com/thing:2793776https://www.thingiverse.com/thing:2792632https://www.thingiverse.com/thing:2792719https://www.thingiverse.com/thing:2797468 -
Bulgin connector key 3D Print Model
Summary
This key can be used to open a few of Bulgin’s small connectors like the PX0731/P so you can wire them. -
IEC C20 connector housing 3D Print Model
Summary
This is the housing of an IEC C20 male connector.
Needed a new one cause I managed to break one. -
AC Charger USB 01 3D Model
AC Charger USB—Only 3d model—Created in Autodesk Maya 2017—Formats:- .max (2017, 2018)- .mb- .ma- .fbx (2017.1 – Release 244292)- .obj—Polygons: 199560Vertices: 201517—Units: MillimetersSize: 71.14 x 44.44 x 22.49
-
AC Charger USB 02 3D Model
AC Charger USB—Only 3d model—Created in Autodesk Maya 2017—Formats:- .max (2017, 2018)- .mb- .ma- .fbx (2017.1 – Release 244292)- .obj—Polygons: 232512Vertices: 235050—Units: MillimetersSize: 72.62 x 39.21 x 22.49
-
Boba Fett ROTJ Gauntlet hose connector 3D print model 3D Model
Boba Fett ROTJ Gauntlet hose connector 3D print modelROTJ Right Gauntlet Hose Connector Part for 3d printing
-
MPCNC cable chain connector 3D Print Model
Summary
I made this to hook up the cable chain to the axis itself.
Connecter i use for the chain: https://www.thingiverse.com/thing:14562 -
Curved Male Header 3D Model
CURVED MALE HEADER=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
Straight Male Header 3D Model
STRAIGHT MALE HEADER=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
FPV SMA Connector Thumb Wheel 3D Print Model
Summary
This printed part fits the 8mm SMA connector nut used on FPV gear. It slips over the nut portion making it easy to tighten/loosen the nuts without a wrench. I print one for each SMA connector and leave it in place. Using PLA the weight is just .25 gm.
There is a small and large version. The large has an outside diameter 1.5 mm larger then the small. I use the small for tight places such as a 45° or 90° fitting. I use the large where there is plenty of room to grasp and turn. You can get the nut slightly tighter with the large version.
Both versions have a .5mm slit to provide a little spring. This allows it to slide easily over the nut and allows for expansion and contraction from summer heat to winter cold. -
XHB Connector 3D Model
XHB Connector=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
Female Header 3D Model
FEMALE HEADER=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
DC Barrel Jack 3D Model
DC POWER JACK=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ
-
Connecteur de ventilateur pour Raspberry Pi / Fan connector 3D Print Model
Summary
Un simple connecteur permettant d’utilisant un ventilateur classique de PC (après avoir retiré le connecteur en plastique d’origine).
Il est important de conserver les lames ressort en état pour un contact efficace.
Les ventilateurs 12v tournent moins vite en 5v mais cela est largement suffisant pour le raspberry pi. -
RX7 S7 and S8 Solenoid Connector 3D Print Model
Summary
Connector to make a pigtail or adapter for non mazda solenoids.
Standard Power Time Male Connector 33-0626 is needed. -
AC power plug 3D Model
the model is made by 3ds max with right scale world no confuse to make selection, just grab model on scene and start render,all textures and materiel included like you see on images.i hope you like it just check others models on my profil
-
Colgate “Snap on tub to screw on travel” toothpaste transfer connector 3D Print Model
Summary
Inspired byhttps://www.thingiverse.com/thing:158910
andhttps://www.thingiverse.com/thing:800679
and especially this customizable one:https://www.thingiverse.com/thing:1972293
where I used it to create the bottom (screw to the small Colgate tube) and then added a snap on connection in tinkercad.
So this “thing” connects snap on Colgate big tubes to screw on Colgate little travel tubes.
It did not need supports. -
Sci-Fi ce_corridor1 (corridor) 3D Model
ce_corridor01 – corridor(ce_corridor01) for corridor connector(ce_corridor02). Maded with SketchUp 2015 Pro SketchUp processed: -254 Faces; -9 Materials; FBX Entities exported: – 640 Faces; – 9 Materials; – not textured; formats .3DS .DAE .FBX .OBJ
-
LOXX Belt Clip Connector 3D Print Model
Summary
A strong and safe attachment solution to keep things attached to your person. This belt look design interfaces with LOXX connectors to allow quick connect and disconnect of everyday carry or larger items such as cameras or belt pouches (eg Leatherman sheath)
See more info here: http://www.makealittlemore.com/2017/07/06/experimenting-with-loxx-fasteners/
The connectors can be bought here: http://www.loxx.shop/en/new/loxx-starter-set-nickel/a-676/
They even supply key chains with a hole for the connector pre-made: http://www.loxx.shop/en/neu/loxx-lifestyle-lederpatch-loxx-blau/a-685/
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.15 Infill:
100% Notes:
make it as strong ass possible!! maybe use ABS. -
Battery – Type 3 3D 3D Model
1. Modeled in Blender.2. Image show & rendered using Cycle render.3. Some Material a Sub-Division before rendering.4. Included Light, Camera and support object.5. Convert to others format:- *.lws (LIGHTWAVE 3D) *.dae (COLLADA) *.obj (WAVEFRONT) *.3ds (3D Studio)
-
Battery – Type 3 3D Model
1. Modeled in Blender.2. Image show & rendered using Cycle render.3. Some Material a Sub-Division before rendering.4. Included Light, Camera and support object.5. Convert to others format:- *.lws (LIGHTWAVE 3D) *.dae (COLLADA) *.obj (WAVEFRONT) *.3ds (3D Studio)
-
Terminal block clamp model 3D Model
– Contains Subdivison Surface modifiers – The materials are prepared for Cycles render
-
3 way 1/2 in PVC internal corner connector 3D Print Model
Summary
After attempting other parts on here which (IMHO) consumed excessive time and plastic, I made this. Intended for a cheap 3D printer enclosure to connect PVC pipes at the corners of the framework. 1 connector prints in around 35 minutes and uses only 6g of plastic. Use good bed adhesion and you should be fine to print.
Print Settings
Rafts:
No Supports:
No Notes:
Small contact area with the build plate. I recommend a raft or good brim unless you use strong bed adhesives. -
Macbook Pro Connector Hub 3D Print Model
Summary
After reviewing the available parts on Thingiverse (of which there are many!) for laptop connector hubs, I decided to create a custom part for my own cables. The hardware this part is designed for is the Macbook Pro 15 inch retina (mid 2014). Ports included are: power supply, both Thunderbolt ports, USB, and headphone jack. I used a micrometer to measure the size of my current apple power supply terminal, and designed all cable terminal-hub interfaces to have a -0.2 mm fit (hub is smaller than cable terminal housing). USB and Thunderbolt terminal housings vary quite a bit in all dimensions, so there is a chance this may not fit your specific connectors.
Part is available at: https://cad.onshape.com/documents/a196b600e6f6e8c0ad7bfc9e/w/2082e1db4c7cc63f5996dca5/e/627410629d75fce8e1e79e2c
To change width and height of each connector’s housing interface, modify the bottom dimensions of sketch 1. Extrude 1-4 determine the housing depth. Enjoy!
Print Settings
Printer Brand:
Formlabs Printer:
Formlabs Form 2 Rafts:
Doesn’t Matter Supports:
No Resolution:
.1 mm Infill:
100% Notes:
Resin used for this print was the Formlabs Tough v2. Parts printed with this resin tend to be a bit more flexible than I like, if your cable terminals aren’t snug enough I would recommend shrinking the hub interfaces with Autodesk Meshmixer or like .STL editing program. -
jack audio adapter 3.5 mm to 6.5 mm model 3D Model
3d model of Hosa adapter GMP-386 1/4 in TS to 3.5 mm TRS.Model consists of one parts. The adapter is at the origin.* Real-world scale (Millimeters)
