Summary
Refrigerator
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Google home wall mounting bracket 3D Print Model
Summary
This wall bracket works well.. Just dont over-tighten it because it will crack like in the picture.
Also, be sure that the cable is in place before screwing it down.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
Easy print. -
Mini Camera Gimbal 3D Print Model
Summary
Alright, well don’t get your hopes up. Without dampers, better bearings, stiffer chassis and the ability to make fine adjustments a selfie stick still works better. However this does demonstrate the general principle.
It is designed to use 624ZZ bearings like these: https://www.amazon.com/gp/product/B071CFN91S
M4 nuts/bolts like these: https://www.amazon.com/gp/product/B017N7ZI72
Springs like these: https://www.homedepot.com/p/Everbilt-Spring-Assortment-Kit-84-Pack-13554/203133714
However you can get the general idea using the printed bearing and pin with a few rubber bands.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
I used 0.2 with a 0.3mm nozzle Infill:
20% Notes:
Lay the struts, gimbal and platform pieces down flat so the “grain” goes the right way for strength.
Post-Printing
Assembly:
Press in the bearings and screw the parts together. The Mount piece has a slot to insert a nut.
There are several pegs to use for the springs, pick a set of springs and pegs that work with the weight of your camera.
The mount was made for my G16 which is a larger point and shoot camera. You will probably have to shim the camera up until it just rights itself.
Warning! Use a wrist strap attached to the camera or photograph over a pillow. -
Microscope Clip 3D Print Model
Summary
This is original PNNL microscope clip (see pnnl.gov and midcolumbiastem.org) with customizable hole diameter. This way you are not limited to glass beads of specific diameter but you can also use your own lens. For example lenses from laser pointers as described in instructables.com.
How I Designed This
STL to OpenSCAD conversion
Thingiverse customizer will not let you import STL files to OpenSCAD script due to arbitrary limitations (see customizer.makerbot.com/docs#limitations). So I wrote simple script that automates the conversion – off2polyhedron.sh. Works as follows:
get your STL file and open it in OpenSCAD
select File > Export > Export to OFF…
run my script on the OFF file
e.g. ./off2polyhedron.sh model.off > model.scadthe SCAD file is clean OpenSCAD code and can be used as is or copy-pasted to another SCAD file
Download the conversion script here – off2polyhedron.sh. -
Burr Puzzle 3D Print Model
Summary
Went overseas and bought a puzzle, Printed a few on the zortrax M200 and they came out perfect. Burr Puzzle- Enjoy -
MK2 Clone – complete 3D Printer 3D Print Model
Summary
Complete set of STL files required to make a MK2 Clone 3D Printer.
Whole story about the printer can be found there:https://prusaclone.wordpress.com/ -
Cr-10 Spool Adapter and Spacer 3D Print Model
Summary
I didn’t like the way the spools rode on the shaft for the Cr-10, so I designed up this spool adapter. If you print one for each side of the spool, they fit over the shaft and inside the spool ID for a much better fit. This also ensures the nut holds the material on, without over tightening. Designed for the Inland 1.75mm 1Kg spools, but works for others as well.
I also recently picked up smaller test spools for glow in the dark and color changing material, and found they were thinner causing the adapters to walk out during printing, so I designed up a quick spacer to solve that problem as well.
Thanks,
Johnny Mac
Print Settings
Printer:
CR-10 Rafts:
Yes Supports:
No Resolution:
.1 layer thickness Infill:
25 Notes:
I used the raft to keep the spool flat against the build plate, but it would likely print without. PLA works fine as these take no load. -
Spinner Arrow with Words 3D Print Model
Summary
I needed a spinner to point to different items, and couldn’t find anything on thingiverse, so whipped this up.
You can modify the text and length, etc. in openscad. I suppose it’d be nicer if I made this customizable, so maybe I’ll come back to this at some point.
If you stop the print after layer 10, you can switch filament color, and the words will stand out more.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
.2 Infill:
10% Notes:
Very easy to print. The .STL file has “DATE” in it, but if you download (free) OpenSCAD, you can modify it to say whatever you want.
Post-Printing
None
I use large brims in general, so I just had to trim it a little to clean it up. -
Earrings with stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 9,700 gramweight in gold silver 6,500 gram
-
Capitals 21 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 22 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 23 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 24 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 25 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 26 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 27 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 28 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 29 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 30 Free 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 31 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 32 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
wall hanger 3D Print Model
Summary
Wanted to make something to mount my fly rod on my wall, could just use some nails, but theres always a reason to print something.
Haven’t tested it to see how much weight it can hold but I imagine its a pretty good amount for something 3D printed
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Infill:
70-100% Notes:
lay on its side, as it will give more strength and support -
Belt 3D Print Model
Summary
This is a 3d printed belt that I designed in Tinkercad, (I haven’t learned how to use Autodesk yet). To assemble you need a paper clip that you stick in the hole then fill the hole with hot glue. The buckle is still a work in progress.
Print Settings
Printer:
Qidi Tech x-one2 Rafts:
No Supports:
No Resolution:
Medium Infill:
20 -
Anet A8 Stock Bed Level Sensor Mount for Bowden Setup 3D Print Model
Summary
Made for the original Anet A8 Auto Bed leveling Sensor to fit on these Beltholders: https://www.thingiverse.com/thing:1433295
which i used to upgrade to this bowden setup: https://www.thingiverse.com/thing:2099577
Works just like the original Anet one, but smaller. Uses the two screws that come with it and two screws to screw it to the belt holder.
Happy Printing 😉
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0,2 Infill:
10% -
Model zodiac acuario 3D Model
jewllery horoscope sign acuario
-
Zodiac Aries horoscope 3D Model
jewllery horoscope sign Aries
-
Part Remover Razor Scraper 3D Print Model
Summary
Protect your fingers. You need them for printing!
HOW TO USE:
Gently slide razor under print
Slide putty knife under razor
Rejoice!
Your bed surface will now last forever and your fingers will remain pain free.
ASSEMBLY INSTRUCTIONS
Buy cheap razor blades from hardware store
Hold blade sharp edge down on cutting board
Push part down onto non-sharp edge of blade -
Yet another belt tensioner 3D Print Model
Summary
Belt tensioner.
It will accept up to a 7.5mm width belt.
You will also need a 3mm screw and nut.
I printed at .2 mm layer height and 100% infill.
1) Insert the nut in the recess inside the body.
2) Thread a nut from the otherside through the nut.
3) Put the tensioner inside the body.
4) Thread belt through assembly.
Make sure the tensioner doesn’t hit or interfere with anything.
5) Tighten screw to tighten belt.
I like them
This will way over tighten your belt if your not careful.
“THE BEER-WARE LICENSE” (Revision 42):https://www.thingiverse.com/kwg08/ wrote this file.
As long as you retain this notice you
can do whatever you want with this stuff (for non profit uses only.)
If we meet some day, and you think this stuff is worth it, you can buy me a beer in return. -
Logan Paul Maverick printable 3D Print Model
Summary
Logan Paul Maverick printable
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
20 -
Ring with stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 7,900 gramweight in gold silver 5,300 gram
