Summary
I decided to make a simple little tool which helps keep your angle straight when you glue your foam board together to make sure that it’s at 90 degrees on the A or B fold. for Flitetest or other foam board planes. I hope you find this little tool useful
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
FT 90 Degree Tool 3D Print Model
-
Filament roll retaining clip 3D Print Model
Summary
I designed these to hold 1.75mm filament to the edge of the reel to avoid bending the filament as when you use the holes on the edge of the reels. These are designed for the specific brand I use(3D spark) so they may not fit your particular reels. Try the single part first before printing the 12 x nest of parts,
I will also leave a STEP file so people can adjust the gap to fit their needs as they see fit.
I found that using 2 of they per reel worked best.
Print Settings
Printer:
tevo tarantula Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20%
Post-Printing
If the hole is a little small, use a 2mm or 5/64″ drill to clean out the hole. -
Solar weather station 3D Print Model
Summary
An outdoor temperature sensor enclosure. Cover still needs to be designed. Fits 60mm x 80mm circuit boad, Using a 60mm x 110mm solar panel, ESP-01, Lithium charger with low voltage protection and a 600mah lipo. -
Y axis structural reinforcement 3D Print Model
Summary
Reinforcement well edited not like the other one that had sharp edges and ugly shapes.
You must need longer M3 screws to tight the motor or just edit the STL to match your preferences.
Print Settings
Printer:
anet a8 Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
25% -
Cable Grommet – Parametric 3D Print Model
Summary
Parametric Cable Grommet to put into electronic boxes where you want don’t a flexible cable to fatigue
Allows Full Parametric Adjustment of all sizes
Cable Hole size inc Tolerance
Overall Size and Thickness
Chassis Wall Thickness
External Cable Exit Chamfer
Print Settings
Printer:
Creality Ender 2 Rafts:
No Supports:
No Resolution:
0.2 -
Earring 10×8 3D Model
Gem Stone – 1 x Emerald Cut 10x84x Round Cut 1.3mm14x Round Cut 0.9mmWeight – 14kt gold 3.1gr.
-
GX – Playground Style Benchmark 3D Print Model
Summary
Simple benchmark
try to print with or without brim
Test accuracy of your printer
Easy and fast way to test your 3d printer
Contains lot of small parts -
Support – Safety Switch – Base TX Video 3D Print Model
Summary
Tampa de fixação do braço, DJI, HF e similares para suporte do Safety Switch para Pixhawk e suporte do transmissor de vídeo TX. -
bottle connecting coupling 3D Print Model
Summary
I needed to connect 2 bottles together so I cut this out of my water filter.
!Don’t forget to CHECK OUT my other designs and FOLLOW my daily KooKoo uploads, Enjoy 😉
Print Settings
Rafts:
No Supports:
No Resolution:
0.2 Infill:
25% Notes:
5 Shells -
GraviTrax compatible piers 3D Print Model
Summary
These pillars (or technically, bridge piers) have been designed and printed because my son got an amazing new toy from Ravensburger: GraviTrax marble run. And of course, during the holidays, we needed more piers to get the marble run built the way we wanted.. we needed.
So here they are: Extra piers to support the original GraviTrax hexagonal base plates.
Optimized for printing time, not for beautiful design. Needed them desperately!
Print Settings
Printer:
Anet3d A8-B Rafts:
No Supports:
No Resolution:
0.2 Notes:
Print with big end down! (Use/play with big end at top)
I print them with the Cura settings:
PLA
Wall line count = 3
Top/bottom count = 3
First layer:
0.3mm height at 200% line width
210°C
30mm/s
Remaining layers:
0.2mm height, 0.4mm width (=nozzle diameter)
190°C
60mm/s print speed, except:
outer walls: 30mm/s
Post-Printing
Play. Maybe some sanding could be required to smoothen the foot (small end) not to brak the original GraviTrax cardboard “play ground”
How I Designed This
First real thingi with Fusion 360
As a hobbyist, I downloaded Fusion 360 some time ago and applied for the educational/hobbyist 1-year license. But then almost did nothing with it.
Ravensburger’s GraviTrax cried for home made parts, and so I started drafting something like the original pier plates, only 3 times as high. Printed an eternity. We needed more, and faster, so I started a new one only applying plasitc where absolutely needed.
Here you are! -
CTC PRUSA i3 Pro B Bowden Drive with Autoleveling 3D Print Model
Summary
My CTC hotend broke and I was without a 3D printer. Luckily I am in the process of building a HEVO and therefore I had the mount, hotend, extruder, retainer and duct already on hand. By drilling two extra holes and removing a little plastic near the X endstop flag in the mount, I made it fit the CTC carriage perfectly. Again, since my printer was down, I didn’t design this in CAD and just modified the piece I had by hand and then created the STL for thingiverse so no guarantees that it will fit. I left a bridge in there for support that you will have to break out and I put in two mounting options; one way the way I mounted it by drilling holes, and another for mounting it with M3 brass fittings to lower the mount closer to the bed. The HEVO mount has the proximity probe spot already, so I figured I should add that sensor as well.
If you are ready for a double mod, keep reading…
Items Needed:
Soldering Iron
several connectors
connector wires (from breadboard)
Arduino IDE
an extra Arduino as ISP to update the bootloader on the CTC Aduino
Marlin firmware
BOM:1 x 5V NPN M12 inductive sensorhttps://www.aliexpress.com/item/M12-4mm-detection-5VDC-NPN-NO-LJ12A3-4-Z-BX-5V-cylinder-inductive-proximity-sensor-switch/32553311139.html?spm=2114.13010608.0.0.iDrnoz
3D Printer Accessories V6 J-Head Hotend RepRap Extruder for 1.75mm Filament, Direct Feed or Bowden. w/ 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube
ALPTAhttp://a.co/9PxYSl48.5″ x 8.5″ galvanized 28ga metal plate to place between the hotbed and glass plate. This ensures that the sensor is triggered properly. Without it you will need to either not use glass or you are going to be very close to the nozzle level. Ferrous metals are the best at triggering proximity sensors, that’s why I didn’t use aluminium.
8.5″ x 8.5″ x 0.880″ glass plate. I prefer to print on glass.
Extruder of your choice (e.g. find one on thingiverse)
ProcessPrepare and install your material for your heat bed. Cut the galvanized plate with some metal shears to size. IMPORTANT: make sure the metal does not short out any contacts on the heated bed. You need to cut around those areas!.
Get the glass plate from your a hardware store. They will cut it to size if you ask nicely. You need the corners angled to have room for the screw heads.
Prepare and install the J hotend and proximity sensor with the extruder mount, retainer and duct from the HEVO project.
Solder the 5V and Ground connections to the board. I chose to use add a connector for easy disconnect.
Make a backup of the original settings. These were mine:
15:07:46.286 : echo:Hardcoded Default Settings Loaded
15:07:46.286 : echo:Steps per unit:
15:07:46.287 : echo: M92 X78.74 Y78.74 Z2560.00 E105.00
15:07:46.287 : echo:Maximum feedrates (mm/s):
15:07:46.287 : echo: M203 X400.00 Y400.00 Z2.00 E45.00
15:07:46.287 : echo:Maximum Acceleration (mm/s2):
15:07:46.287 : echo: M201 X1400 Y1400 Z100 E80000
15:07:46.287 : echo:Acceleration: S=acceleration, T=retract acceleration
15:07:46.287 : echo: M204 S1400.00 T5000.00
15:07:46.287 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
15:07:46.287 : echo: M205 S0.00 T0.00 B20000 X13.50 Z0.30 E5.00
15:07:46.287 : echo:Home offset (mm):
15:07:46.287 : echo: M206 X0.00 Y0.00 Z0.00
15:07:46.287 : echo:PID settings:
15:07:46.287 : echo: M301 P19.86 I1.00 D98.93Upgrade your bootloader. Here is how to do it:
Time to download, configure and install Marlin. Use the GEEETECH example in the examples folder as a base. I attached my Configuration.h file here for reference with auto leveling enabled: https://www.thingiverse.com/download:4494314 . Using this config will consume 94% of the memory. So there is hardly anything left for additional features.
Last but not least make sure you adjust the z-axis in the LCD until you get the nozzle in the correct location (mine was -0.25). Then make sure you save your settings.
*ANOTHER BENEFIT of UPGRADING YOUR FIRMWARE**
The CTC is over-extruding (at least mine was). In Cura I had set the correction in the start script, but with the new firmware I changed the E stepper from 105 to 95 in the configuration.h, so no more start code fix needed! -
Hoth Badges 3D Print Model
Summary
Hoth Badges for Leia and Han. 4-color version designed for the Prusa i3 MMU. -
Customizable Project Box With Lid Screws and 2 Holes 3D Print Model
Summary
I added a couple holes in each end. I was going to put some barrel jacks in them. Go ahead and put whatever you want into those holes.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Infill:
100 Notes:
ABS @ 230
bed at 80
100% infill
print speed 60
How I Designed This -
YABR – Your Arduino Balancing Robot 3D Print Model
Summary
These are the 3D-parts for the famous YABR Selfbalancing Robot, which you can find at http://www.brokking.net/yabr_main.html
All kudos and many thanks go to J. Brokking for his comprehensive building manual and the videos!
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0,2 mm -
Mini Pulse Motor 3D Print Model
Summary
This was a fun engineering project to make a very small pulse motor. I included three configurations but it should be noted that configuration three was the one that worked. -
Abyssal Grand Cruisers 3D Print Model
Summary
Grand cruisers, appropriate in scale for your favorite space battles game. -
Blocky Pikachu 3D Print Model
Summary
This is a cute little Pikachu made of dozens of tiny blocks.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Infill:
10 -
Simple holder 3D Print Model
Summary
Easy, simple and fast to make. A basic holder for Phones, models, …
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
10% Notes:
You can use any Settings you want. -
Wolf Hind Paw 3D Model
High poly wolf hind paw.File contains one mesh object. It is manifold and print ready.Measure units are meters. It is about 1.26 meters in height.Available formats .blend, .stl, .obj, .fbx, .3dsNative format is .blendFace count is 545414For .3ds format there is 62174 faces.
-
Ring with stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 8,100 gramweight in gold silver 5,400 gram
-
Ring with hearts Free 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 5.600 gramweight in gold silver3.800 gram
-
Menu Knob thing for MPSM Select Mini V2 3D Print Model
Summary
I was looking around for a knob for my V2 Select Mini but all the ones were for the V1 which has a different size middle thing so they didn’t work.
I found one but the design dimensions were sloppy and not that tight so I made my own based on the dimensions of that one but slightly smaller so it’s a very tight fit.
After printing it will take a bit of pressure to pop it onto the printer but after it’s on there it feels like it’s one piece with the printer. No glue or anything needed.
I printed mine in eSun PLA+ @210C and no heated bed. Print came out very nice.
Print Settings
Printer:
Monoprice Select Mini Rafts:
No Supports:
No Resolution:
0.2 or 0.1 Infill:
20% -
BabyNES RasPi B+ case remix 3D Print Model
Summary
Shoutout to jrebeiro for the design!
I originally wanted to add a spare 30mm fan to the top of this case. And while it is possible with a raspberry pi 3, it isn’t really necessary. After doing some reading online, it doesn’t seem like I could ever get the Pi hot enough to cause performance issues. So I opted to add another vent instead. The Raspberry Pi cutout sits just above and slightly off-center from the Pi’s processor. I didn’t want to damage the integrity of the original design, and to be honest I prefer how this looks.
Happy printing!
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
20 Notes:
Printed in PLA
205 print temp
70 bed temp
Post-Printing
There are 4 holes that run from the bottom of the case almost to the top.
I stuck in pieces of 1.75 mm filament and broke them off and then extruded extra filament into the holes and smoothed it with my fingers.
It won’t create an unbreakable seal, but it will allow you to pick up the case without it falling apart.
Painted with acrylic paint.
(Not to perfect color/paint area specifications for you nit-pickers out there) -
E-Flite UMX Prop Adapter 3D Print Model
Summary
Replacement prop adapter for E-flite Ultra Micro (UMX) airplanes. Replaces EFLU4067, this should work on any UMX airplane which uses the 180-size brushless motor. This will still break in the event of a crash, protecting the rest of the aircraft.
This is set up to run just the prop, length has been adjusted so no spinner/backplate are required.
Holes should be good to go, the 3 mounting holes may need slight enlargement – I do this by just twisting an X-acto knife around in there a couple of times.
Print Settings
Printer:
XYZ Da Vinci Mini w Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% Notes:
Printed with XYZ Da Vinci Mini w at 0.2mm layer height, 50% infill, +10C temperature (black PLA) and 40mm/sec retract speed. I highly recommend using a brim to ensure that this stays level and true.
How I Designed This
Designed in eMachineShop. -
Dice 3D Print Model
Summary
This is my very first thing I created on my own. Just a dice with 6 sides and 0.5 mm deep holes. -
Tile Based Chess Pieces 3D Print Model
Summary
I made these Tile based Chess pieces when I herd about Tile Chess. -
Ring 10×8 3D Model
Gem Stone – 1x emerald cut 10x8mm,14x round cut 1.30mm,14x round cut 1mm,Ring Diameter – 17.4mm,Weight -14kt gold 3.95gr.
-
Christmas Card 3D Print Model
Summary
Christmas Card tropical theme with name blank! Great gift idea for friends and family! -
608Z bearing holder 3D Print Model
Summary
Bearing holder for 608ZZ 22mm x 7 mm. bore =8mm
printed in ABS 0.2mm resolution -
LIGHTER CLIPPER MEDIUM 3D Print Model
Summary
LIGHTER CLIPPER MEDIUM !!!!ATTENTION, SCALE TO 1.035!!! -
C-Clip 3D Print Model
Summary
Mein Geschirrspüler kennt nur “auf” oder “zu” und deshalb entwarf ich zur Lödung des Problems einen Klipp, der die Klappe anlehnen lässt. Das Geschirr lüftet jetzt ab und ich kann es direkt in den Schrank räumen. -
Egg Man 3D Print Model
Summary
Wanted to design a new creature and thought of something weird, so BAM!
How I Designed This
First….
I went into tinkercad, and used the objects from Extras, and started putting random stuff together until it looked cool and weird -
Cartouche decor 3D Model
STL 3D model – Cartouche decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Cartouche decor 2 3D Model
STL 3D model – Cartouche decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Eye glasses holder – Wall mounted 3D Print Model
Summary
Fiance asked for a modified version to be mounted on the wall- thus I share this remix. -
Skull & Drones Hooligan/Ultra Gopro Mount For Gopro/Gopro Session 3D Print Model
Summary
Mount for any gopro (non session) style camera that is designed to be screwed onto the top plate of a Skull & Drones Hooligan or Ultra. -
Twisted Gear Spinner 3D Print Model
Summary
Spinner takes a standard 608 bearing (22×7) Here are some bearings I have had good luck with.
Print Settings
Printer:
Creality CR-10 Rafts:
No Supports:
No Resolution:
0.1mm Infill:
100% -
Toy Tire 3D Print Model
Summary
Lost one of the tires for this Battat Take Apart Crane Truck:http://www.battatco.com/collections/battat/take-apart-crane-truck
This design is about the same size, and looks fairly similar. -
Koch Snowflake 3D Print Model
Summary
A snowflake that is based on a very famous fractal! A line of infinite length that binds a finite Area! Fractal dimension ln(4)/ln(3) !!!!!!!1!1!!one!1!!11!!!eleven! -
Set of helmets from Star Wars 3D Model
File format: OBJ,3Ds,STL.1) Star Wars Stormtrooper Concept Helmet2)Tank Tropper Helmet3)Play Arts Stormtrooper Helmet
-
Earrings with stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 2,700 gramweight in gold silver 1,800 gram
-
Magic Box Challenge 3D Print Model
Summary
This is a cool project I Made- if anyone can use a CAD software to open it and find out what is inside post a comment saying you succeded. Only use Cad software- don’t print it and break it open.
Have Fun!! -
Headphone holder desk mounted 3D Print Model
Summary
Headphone holder to mount on your desk. Headphones get hung in inwards in case there is no space on the side of your desk. Most headphone holders hang the phones sideways. I wanted it the other way around. -
Dice Tower for Descent2 3D Print Model
Summary
Dice Tower for Descent2
Print Settings
Printer:
FLUX Delta Rafts:
No Supports:
No
Post-Printing -
Foldable door hanger 3D Print Model
Summary
This is an replacement pastic hanger for an aluminium door. -
Girl blowing up dress 3D Model
Girl blowing up dress with high quality of stl file which is suitable for 3D PrinterTHank you so much. I hope you like this!
-
Friends Plaque 3D Print Model
Summary
A Friend is one who walks in when other walk out
