Rating: 0.00, Vote(s): 0
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
The Octopus099 3D Print Model
Summary
aersgfbvsrgtzbf -
MK8 Dual Etruder Mount 3D Print Model
Summary
Dual extruder mount that I made for my Tronxy Prusa 3.
I wanted to keep all my original single extruder in tact for easy replacement so this one has the mountings for Hictop Linear Bearings which by the measurements are the same as my originals.
Print Settings
Printer:
Tronxy Prusa I3 PM802 Rafts:
No Supports:
No Resolution:
0.1 Infill:
30 Notes:
The X belt tensioners were later glued on as mountings are slightly off -
Geeetech i3 Hotbed adjustment nut 3D Print Model
Summary
First thing printed !! The wingnuts to adjust the hotbed are not very confortable to turn, it is a two hands job, so the first thing I printed are these knobs. As I had only some nylon to print with, I added a .5mm skirt to make the piece stick better to the bed as in the first try it got loose and went moving around. I printed without supports, and when the print was high enough, I paused and drop the M3 nuts in, so the top side would have something to lay on. -
2×2 Dungeon Floor Tile 3D Print Model
Summary
Rafts are encouraged so you dont damage the print removing it but not needed.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Yes Supports:
No Resolution:
.2 Infill:
20 -
Replacement for the closing system of a PVC Window 3D Print Model
Summary
These are plastic replacements for a PVC window I had to repair.
Print Settings
Printer Brand:
Up! Printer:
Up Plus Rafts:
Yes Supports:
Doesn’t Matter Resolution:
0.25 Infill:
Maximum Notes:
Place the pieces carefuly NOT to put the Z axis of the printer along the axis of force, to ensure durability. -
3030 bowden motor mount 3D Print Model
Summary
A remix of Thingiverse part 2565427 but for 3030 aluminum extrusion.
Added bracing and additional mounting holes for M6 bolts.
Print Settings
Printer:
Doesn’t matter Rafts:
No Supports:
No Resolution:
whatever cranks your handle (I used .16) Infill:
again, whatever floats your boat (I used 20%) -
Arduino 8-bit synth case 3D Print Model
Summary
This case was designed after reading a new magazine called Hackspace. In this issue a man named Chris Ball shows how to turn an Arduino uno in to a 8-bit synth.
i like the uno basics kits you can get off Ebay and the Adafruit perma-proto, so i desgined this kit to house those.
holes for the pots and push button are included in design but have not put holes for audio jack and CH340 USB which will vary depending on what one you have.
You will need:
Adafruit perma-proto 1/2 size
CH340G USB TTL Serial Adapter Ebay 162766671421
Arduino Uno FULL kit UK – Ebay 162597203220
4x 10k linear potentiometers
470r resistor
100uF electrolytic capacitor
push button (12mm)
audio jack
Print Settings
Printer:
TronXY P802MA Rafts:
No Supports:
No Resolution:
any Infill:
15-20% -
Lamp Shade / Abat Jour 3D Print Model
Summary
https://www.youtube.com/watch?v=TaMHD__nSLk&feature=youtu.be&t=416 -
40K chainsword V2 3D Print Model
Summary
I have make some update on 40K chainsword V1 cosplay whit up the size of the chainsword and design so up can make chainsword bigger by add chainsword_3_v2.stl file. -
X-UAV Talon front skid 3D Print Model
Summary
This front skid plate is intended to be installed on X-UAV Talon 1.7m with no front wheel. This will protect front part of the fuselage on landings. The front skid plate has an impact absorbing segment that is meant to absorb pressure on hard landings. To print, rotate the object then print on its side lying on the print bed. You may use ABS or PLA. To install, just apply foam safe glue on the surfaces to be bonded.
Print Settings
Printer:
ANet AM8 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2-0.4 Infill:
20-30% -
Sunflower Track Light ( see video for details ) 3D Print Model
Summary
This is a lighting fixture that I recently made. The YouTube video showing the entire build https://youtu.be/6Kby5ZsPQHo . You could easily just make single fixtures using the parts. It was a fun project using many different materials. The printed parts fit standard light fixture hardware and only use LED bulbs so the shade does not melt. I used green and yellow Hatchbox PLA. -
Star Wars The Last Jedi Praetorian Guard Double Blade 3D Model
Star_Wars TLJ Praetorian_Guard Double_Blade3D Print
-
Bump decor 3D Model
STL 3D model – Bump decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Bump decor 2 3D Model
STL 3D model – Bump decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Bump decor 3 3D Model
STL 3D model – Bump decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 2 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 3 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 4 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 5 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 6 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 7 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 8 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 9 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Capitals 10 3D Model
STL 3D model – CapitalsThe model is ready for prototyping with CNC machining and 3D printing.
-
Multi-drawer Components Cabinet 3D Print Model
Summary
Multi Drawer Components Cabinet
I designed this because I wanted a components cabinet (similar to those made by manufacturers such as Raaco and Akro-Mils) to store small parts (originally to organise all of my resistors to make it easier to find the one I wanted). There wasn’t anything on Thingiverse that completely met my needs, so I drew this up
I have deliberately made the walls of the cabinet carcase quite thin (1mm) as I found that some things on Thingiverse appear to be over engineered in this regard. The lip at the top-front of each drawer slot is to prevent the drawer being accidentally pulled completely out (raise each drawer at an angle to insert / remove). I rejected other retention methods – spring-clip, detents etc as they would complicate a simple design and require thicker walls. The cut-outs in the walls reduce the amount of material used and improve the aesthetic, especially with different coloured drawers.
The drawers are made with thin walls (0.5mm) and turn out to be quite flexible and tough. You can set minimum perimeters = 2, if you want more rigid drawers. The corners are radiused to make it easier to remove small parts (I hate it when a 3mm nut gets stuck in the corner and I have to resort to tweezers to get it out.). The drawers have a finger slot instead of any protruding handle – partly to give a clean aesthetic but mostly to avoid having to use any printing supports.
I’ve Printed the cabinet carcase in PETG and PLA (at 0.35mm layer height) after having massive fails with ABS (shrinkage, warping and stress cracking). Be warned! the largest size (5 x 6) that fits on my print bed takes a looooong time to print!! Approximately 25hrs (I’m still printing it as I post this). I’ve printed the drawers in PLA and ABS, PETG having failed at the radiused corner.
I haven’t put any feet on the cabinet (I use stick on rubber feet) so they can be epoxied together to form larger sizes if desired.
I drew this in SketchUp and have included the files for those who want to customise or change the design. The design is modular – copy however many of each type of drawer that you want, align them (precisely), group them and export to STL. The “Prototype with Hex Perfs.stl” drawings have a pretty hexagonal perforation infill to the openings but were not structurally sound, and were removed from the final design.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.35mm – Carcase, 0.2mm – Drawers Notes:
Printer – Prusa i3 MK2S
Print Settings – Cabinet Carcase – PLA and PETG (I think ABS would need a heated enclosure)
0.35mm layer height, no supports, 100% infill, minimum perimeters = 1.
Print Settings – Drawers – PLA, ABS
0.2mm layer height, no supports, minimum perimeters = 1, Extra perimeters if needed = True, Ensure vertical shell thickness = True, Avoid Crossing Perimeters = True, Detect thin walls = True -
Monoprice Mini Delta Glass Clips 3D Print Model
Summary
These will hold a 120mm glass plate on the bed of your monoprice mini delta quite securely. You also get some nifty shields that prevent debris from falling into the bottom of your printer. This is a remix of 2 good designs on Thingiverse and I think they are better combined than separate. The reason is that this design doesn’t allow the clips to spin, which with previous glass clips on Thingiverse could allow the bed to get free mid-print. These are designed to hug the stock clips tightly, so they become a second point of contact and add to rigidity. You’ll want to clip the shield end of this part higher up on the rails, and then slide it down, you’ll probably have to wiggle it back and forth a bit to get it over the stock clips.DEFINITELY CHECK: Each time you re-install your glass plate, make SURE you can still hear the tact switches under the bed click if you press your fingers on the three spots where it goes to auto-level. I’m not responsible for any damages caused by the use of this print.
Print Settings
Rafts:
No Supports:
Yes Notes:
Printed with PLA -
Cessna 172 Flight Simulator Panel – Flap Control 3D Print Model
Summary
Flap control with servo-actuated position indicator for a Cessna 172 flight simulator panel.
For more information, see the project details at https://github.com/allanglen/c172-flight-sim-panel.
For details about this part, see https://github.com/allanglen/c172-flight-sim-panel/tree/master/flap_control_panel. -
Swissknife : GoPro session mount 35degrees 3D Print Model
Summary
Gopro Mount for swissknife frame.
The bottom part can be attached with 2 zip ties to the top plate. -
Star vs the forces of evil – Printed figurine Star Butterfly 3D print model 3D Model
Star vs the forces of evil – Printed figurine Star Butterfly 3D print modelThis print star Butterfly from the cartoon “star vs the forces of evil”.____________________________________________________________The model consists of 16 parts: ✮ – Stand ✮ – core✮ – legs ✮ – clamping✮ – head ✮ – crown✮ – body ✮ – handle✮ – boots ✮ – pen✮ – arm ✮ – sphere✮ – Hair✮ – horns✮ – amulet____________________________________________________________Formats: ✮ – STL✮ – OBJ✮ – C4D✮ – 3DS✮ – FBX____________________________________________________________The model is present on Sketchfab, but not in an exploded view. YouTube -And also can order me.Look at my other models, maybe you like them.
-
Kolovrat pendant 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 12.500 gramweight in gold silver 8.400 gram
-
Pendant Muslim symbol 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 10.900 gramweight in gold silver 7.300 gram
-
Earrings with pearl and gems 3D Model
18K gold – 2.60grPearl – 4.00mmGems:2 – 3.00mm2 – 1.40mm4 – 1.20mm4 – 0.90mm
-
Vintage Northrop Aircraft Sign Litho 3D Print Model
Summary
Here’s just a great looking old Northrop logo. The STL file should print out real nice too. Bar none, the greatest and most unsung WWII plane was built by Northrop, the P-61 Black Widow. It’s my favorite prop plane. MAAM is building one of the I think only THREE P-61’s left on the planet, and theirs will be the only airworthy one. It has one hell of an interesting story behind it too, look it up! I can’t wait to see that bad boy in the air! -
WWII Era Pratt & Whitney Aircraft Engines Sign Litho 3D Print Model
Summary
Here’s the world famous Pratt & Whitney Dependable Engines logo. I think this file turned out fine, and it should print nicely. I’m going to make at least a couple of these myself. I would have to think that the P & W radial engines are in the top five list of machines that we couldn’t have won the war without. Right up there with the Willys and the DC-3. They’re power houses, they sound great, and they are still running to this very moment the whole world over. It doesn’t get much better than that!
This is the last one of these I’m posting for now. I have 21 (!) more that I made and they’ll get uploaded throughout the week. -
Christmas Bell – Voronoi Pattern 3D Print Model
Summary
My 2nd Voronoi christmas design.
https://www.instagram.com/p/Bc4RsixAvDA/?taken-by=tondanosek
fast christmas gift.
This one is special, because the ball is assembled to bell. 🙂
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
0% Notes:
Be sure that your bed preparation was done properly. Dont be affraid of big adhesion. This is important to get small ball on the right place.
For PLA
210/55 first layer
200/50 other layers (lower temp of nozzle because of stringing)
Retraction – 1.2 mm
Z lift – 0 mm
Perimeter speed – 30 mm/s
Non Printing moves – 200 mm/s
This settings will avoid stringing. -
Reusable Sploof V2 3D Print Model
Summary
Designed with tight tolerances. Please let me know if there are any problems with the scaling. -
Glock 43 Pistol Stand 3D Print Model
Summary
Glock 43 pistol stand with two magazine slots. I also added the Glock logo and number “43” so you know which pistol this stand belongs to.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 Infill:
20
How I Designed This
Fusion 360 -
Replacement Battery Cover for PS3 Remote Control 3D Print Model
Summary
A replacement battery cover for the Playstation 3 remote control.
Print Settings
Rafts:
No Supports:
Yes Resolution:
.15mm Layer height Infill:
20%
Post-Printing
Support material can be removed without too much trouble with needle nose pliers. -
Nissan Pathfinder / Xterra / Frontier hood prop rod clip 3D Print Model
Summary
Replacement hood prop rod clip
Fits:
Frontier 2005-2017
Pathfinder 2005-2012
Xterra 2005-2015
I printed mine with small supports under the little clip legs, and it printed fine.
Hope this helps! -
CR-10S Locking Bed Leveling Knob 3D Print Model
Summary
Inspired by orcusomega’s “Locking CR10/S4/S5 Bed Leveling Knob” (https://www.thingiverse.com/thing:2462249). This is a knob that you can insert an M4 lock nut into. The hole for the screw is not fully open. After printing there is a .4mm layer that you need to cut with a utility knife before use. No supports are necessary.
Quote from orcusomega’s notes:
“Requires a total of 8 M4 nylon locknuts. Remove the stock leveling wheels, and use one of the locknuts to keep the screw in place on the hot bed (being the nut all the way to the top,. making the screw stay in place without the need to hold the top with a screwdriver). Then replace the springs. Insert the remaining M4 locknuts into the wheels and thread them on – wala!” -
Gear holder for paper clips Free 3D Model
This is simple paper clips holder with cone gear form. If you need any changes – e-mail me about.Best regards!
-
Soporte radiador 3D Print Model
Summary
Esto es el primer diseño que subo, necesitaba en casa un soporte para un radiador, y eso es lo que es.
En PLA acaba doblandose.
Recomiendo imprimir en ABS, de momento en ABS me funciona bien.
