3ds max,hight poly model,ready for 3d printingpolys-491520
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
3d Printable Heart 3D Model
3d Printable HeartThis is my first 3d printable model So if you find anything wrong with it let me know. I appreciate thatI exported it in two part as .obj and .stl formats.
-
Pi Zero Dual Relay board Enclosure 3D Print Model
Summary
A dual channel relay enclosure for a wi-fi garage door opener.
It works with just about any model / make of garage door opener.
Note: The photos of the item “in use” are of a draft version (print settings below applied) where the lid wasn’t perfect, but I decided it was ‘good enough’. I have updated the design you see here to fix the fit and finish issues.
I started out with this instructable, detailing a rather old hardware setup using a dual channel relay board.
I didn’t much care for the PHP / Apache on Raspbian stack. I know other folks who have used this setup and had issues with SD card corruption.
So I ended up creating my own app in go to do the HTTP bits and handle the GPIO interaction.
Then I took it a step further and baked up a minimal Yocto Linux image with a read-only rootfs, to guard against the SD card corruption issue.
If you want to customize the linux image, you can read the docs in my bitbake layer.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% Notes:
Layer Height: 0.2
First Layer Height: 0.2
Vertical shell perimeters: 2
Horizontal Shells:
Top: 3
Bottom: 3
Brim: 4mm -
Pure Bottle 3D Print Model
Summary
Title : Pure Bottle
Designer : Stanley Mars
Date : 2017/12/14
Software : Solidworks 2016
Tip
If you applied and like my design please just feel free donate to me. Appreciate !!!
Have any issue or any idea just free free email me. I will glad to solve your any question. 😉
EMAIL : [email protected]
Sincerely.
Donate Address
BTC(Bitcoin) : 34rkrNccR2Yob24yTahkxcEq6fLGmmuyvB
ETH(Ethereum) : 0x194dd6281ec979281155c83fe5d0586e3e380b6a
LTC(Lite Coin) : Lg6noExxFLyzHF68t1AFeZpdkRYMkNvyPR
XMR : 43q1S7LnMvwixdrAM74EidasrC5v14XkfAHJjYwDjBmsXHNhAgbgrftiQub3kTqcinFWgw9fbgMRHdfSH1Bf9GncC6c2iEY -
Fan duct & Auto Level sensor support 3D Print Model
Summary
Fan duct & Autoleveling sensor support for Geeetech I3 Pro B.
Note: print supports needed for Fan Duct only. -
Keyport Slide USB 3D Print Model
Summary
I wanted a detachable USB Drive for my Keyport Slide.
Pause mid print to add the USB chip.
Tape/Glue it to the bottom.
I put masking tape on the top side to help it print on top and protect the USB chip.
Included file with no overhang so you can just tape/glue the USB chip without having to pause print. -
Ronald Reagan 3D printable portrait 3D Model
3D printable portrait bust sculpture of former US president Ronald Reagan. Portrait is available in OBJ and STL formats.Height 100 mm. One stl file is with Reagan solid, other is hollow with 0.8 mm shell.Included in pack:-Stl files solid and hollow.-OBJ file.Browse my profile to see rest of my work.If you want custom work, feel free to contact me.
-
Wolf Pendant 3D Model
High Poly print ready Pendant.Centimeters are used as measure units.Diameter is about 5 cm.Each file contains one mesh object.Available formats: .obj, .stl, .3ds, .Blend, .fbxNative format is .blend.There is either one .obj file with suffix “_parts” that contains parts of it before boolean operation.Faces count: 296269For .3ds there is 63092 faces.
-
Mk.10 Extruder Silicone Cover Mould 3D Print Model
Summary
This is a mould for a high temperature silicone insulator for the MK10 heater block as fitted to the Wanhao i3 Plus and other printers. Gives a 3mm insulating shell around the outside of the block with ports for the cartridge and thermistor wiring.
Post-Printing
Parts required
You’ll need 4xM4 screws and nuts to bolt the two halves of the mould together. The flanges are 3mm thick so M4x10 should just about do it.
To mould you’ll need to fill half the mould with your silicone – if you can’t get a runny 2 part mix then try to pipe it into the corners. Push the insert in and make sure the silicone is flush with the top. The cross on top should allow the cover to be removed over the insert once cured. -
j2 Prime case 3D Print Model
Summary
i couldnt find a j2 prime in the net so this is my contribution to the everyone 🙂
printed and tested using PLA -
Really basic Titan Aero Bltouch+fan mount 3D Print Model
Summary
Real basic thing I thought someone could use, I got tired of the bltouch adjustable mounts I found on here breaking, so I made a much beefier one. Could use some tuning but it works for the job I made it for. -
THUGBUSTER 3D Print Model
Summary
A little self defense ring that if printed with metal filament might actually be usable and viable. enjoy!
I am NOT responsible for any damage to persons or proper resulting from any use of this ring or any modification of it!
Print Settings
Rafts:
Yes Supports:
Doesn’t Matter Infill:
100% Notes:
The ring can be resized in any software. As of now the inner diameter is 80% of an inch. -
JFK 3D printable portrait bust 3D Model
3D printable portrait bust sculpture of former US president John Fitzgerald Kennedy. Portrait is available in OBJ and STL formats.Height 100 mm. One stl file is with JFK solid, other is hollow with 0.8 mm shell.Included in pack:-Stl files solid and hollow.-OBJ file.Browse my profile to see rest of my work.If you want custom work, feel free to contact me.
-
Wabbajack 3D Print Model
Summary
cheese for everyone! wait. scratch that. cheese for no one.
50% of the vertices and triangles have been reduced but it is still massive the stl’s are split into 7 pieces and still may not fit on the print bed
caution: untested and not scaled to standard bed sizes.
again sorry for the stupid amount of polys
universal reference sheet: http://sta.sh/05gdjzyi2cs -
17 Ah 18650 Battery Pack ( 3S5P ) 3D Print Model
Summary
This a enclosure for 15 18650 cells to make a Battery Pack. I used 3400 mAh cells to make the 17Ah -11.1 V Battery Pack.You can see the full project on my Instructables.https://www.instructables.com/id/DIY-Professional-18650-Battery-Pack/
Print Settings
Printer:
Creality CR_10 Rafts:
No Supports:
No Resolution:
0.3 Infill:
100 Notes:
Print Speed : 70 mm/s
Fill Density : 100%
Extruder Temperature : 205 degC
Bed Temp : 65 degC -
TJBot – A DIY Robot powered by IBM Watson Cognitive Services 3D Print Model
Summary
This thing contains files to 3D TJBot – a do-it-yourself, open-source kit to learn, experiment with and explore AI using IBM Watson services. Once built, you can add a list of components ( raspberry pi, RGB LED, a microphone, speaker, a servo motor, and a camera) and then run sample code that allows the robot listen, speak, translate text, lookup the weather, wave its arm etc using various IBM Watson AI services.
Printing
Please print the right and left leg with supports. All other parts can be printed as is.
Want to Learn More?
View a step by step instructable on how to 3D print TJBot on Instructables.
Visit the TJBot website to learn more about the project. Hint: You can also make TJBot from laser cut cardboard.
Visit the TJBot [Github Repo].(https://github.com/ibmtjbot/tjbot) to learn more about how you can program TJBot.
Enjoy!
Post-PrintingGot all your parts printed? Here is how to assemble it all.
-
Frame for Polar M600 Watch Strap Buckle 3D Print Model
Summary
I lost the metal buckle frame for my Polar M600. Luckily the pin and the prongs didn’t fall off. Couldn’t find just the frame anywhere for purchase, so designed and printed one for myself.
I’m fairly new to 3D printing (less than 1 week), and this is the first 3D thing I’ve ever designed. Only had white PLA with me so used that, but ideally would look nicer with silver metal PLA.
Print Settings
Printer:
MP Select Mini v2 Rafts:
No Supports:
No Resolution:
Layer height: 0.1, Shell thickness: 0.8 Infill:
100 -
Humpback Whale, attempt #1 3D Print Model
Summary
Sculpted in Oculus Medium. Done from memory without a reference photo, so the proportions are likely off.
I suspect that to print it well, you’d need to slice it in half head/tail, and print with the flat cut faces down. Should scale well to the limits of your printer. -
Christhmas Decorations 3D Print Model
Summary
Hello it’s HanJo 3D !
Watch my video !https://youtu.be/MaxwzAk_AKs
I Hope you like it ! Good Print !
Follow me on :
YouTube : https://www.youtube.com/channel/UCYe8uTTnR_Pe3uIemazNO5w
Facebook : https://www.facebook.com/hanjo.hanjo.125
Twitter : https://twitter.com/HanJo_3D
Instagram : https://www.instagram.com/hanjo3d/
Thingiverse : https://www.thingiverse.com/HanJoTv/about
Cults 3D : https://cults3d.com/fr/utilisateurs/HanJo_3D/cr%C3%A9ations
How I Designed This -
45mm soviet anti tank gun 3D Print Model
Summary
Mined from 3d warehouse and repaired with makeprintablehttps://3dwarehouse.sketchup.com/model/b7b16563-af5a-4fd4-8be2-9a23efbf456d/ANTI-TANK-GUN-45-MM-TYPE-M42-RED-ARMY-WW2-MAIN-DEFENCE-LINE-ANTI-TANK-SOVIET-ANTI-TANK-WW2
Scale 1:56
Test print required 🙂 -
Snowman Bank (Not Tested Yet) 3D Print Model
Summary
I made this Christmas themed piggybank hope you like it. I’ll be making more of these. -
Tutankhamun 3D Model
Hi guys!I show you the model of the Tutankhamun with high quality. (*.stl file )I hope you like this. Just purchase and print it right now to experience.Thank you so much!
-
Gold crown ring 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 5,300 gramweight in gold silver 3,500 gram
-
Social Munzee tag 3D Print Model
Summary
munzee tag for social munzee. Part made in imperial measurements. -
Laser cut living hinge box 3D Print Model
Summary
Introduction
I remixed this design to extend the lip of the lid to give you something to grab onto.
For now, I’m just using a rubber band for closure.
Materials
1/8″ plywood (I used Baltic birch)
Special instructions
Try to cut the hinge in the direction of the grain, so it’s easier to bend.
Use a damp (not dripping) paper towel to wet the hinge area. This will allow the hinge to bend without breaking. Use a rubber band to hold the hinge closed while damp to allow the wood to retain this position.
Glue and assemble, then clamp as needed.
Location and device
Cut at HackPGH on a WKLaser LC6090. -
cnc2417 Z axis 55mm spindle mount holder 3D Print Model
Summary
55mm Spindle mount for chinese CNC “cnc2417” 24 x 17cm . This router mount 35mm spindle as default and not compatible with more diameter.
Assembly requires:
2 x bolts M3 >18mm
2 x nuts M3
4 x screws M3 16mm
No material support needed
Print Settings
Printer:
HyperCube 3D Printer Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2mm Infill:
100% Notes:
https://www.thingiverse.com/thing:1752766
How I Designed This
Designspark Mechanical Downloads:
De: https://www.rs-online.com/designspark/mechanical-software-de
En: https://www.rs-online.com/designspark/mechanical-softwareBuy
Cnc router CNC2417
https://www.aliexpress.com/item/cnc-2417-diy-cnc-engraving-machine-3axis-mini-Pcb-Pvc-Milling-Machine-Metal-Wood-Carving-machine/32799560097.html?spm=a2g0s.9042311.0.0.eAyshb -
One Piece Heart Neclace 3D Print Model
Summary
Prints in one piece. Requires 200×200 build plate minimum. Printed with 0 infill at .2mm level height. -
torre ET ITC 3D Print Model
Summary
modelo de la torre de la escuela tecnologica instituto tecnico central en bogota Colombia -
Box for Sonoff TH10 & TH16 3D Print Model
Summary
Box for one Sonoff TH10/TH16 with holes for two pg9 cable glands and a rocker switch. Room for temperature/rh sensor separated from board with a wall. Lid is thin around LEDs, and has a hole for accessing button on the PCB.
Sensor has to be soldered on.
Some 3mm screws are required to fasten lid and PCBs.
16A Rocker Switch: http://preview.tinyurl.com/yc4umcp6 (for your confidence), http://tinyurl.com/yc4umcp6 (direct to Aliexpress)
Why? Don’t like the look of the original Sonoff box… -
KIA Soul Embleme 3D Print Model
Summary
Austausch Embleme für Kia Soul 09 Vorne/hinten
Print Settings
Printer:
TEVO Black Widow Rafts:
No Supports:
No Resolution:
0.1-0.3 Infill:
10% oder 100% Notes:
bei 10% Füllung Gut Kühlen beim Drucken -
PTFE Holder for 8mm Screw Bar 3D Print Model
Summary
I make this thing for guide the ptfe tube for my extruder.
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
Gasbremse Luftgewehr 3D Print Model
Summary
Gasbremse für Black OPS Luftgewehr
Print Settings
Printer:
TEVO Black Widow Rafts:
No Supports:
No Resolution:
0.1-0.3 Infill:
10-15% -
Soft robot 3D Print Model
Summary
This is a soft robot project I have been working on. I have done a complete write-up here. -
Beholder Tree Ornament 3D Print Model
Summary
Just a fun little tree topper, designed for my old Solidoodle 2 (0.3mm). Both sides have no real overhangs and make for an overall (mostly) hassle-free print.
Post-Printing
The Final Product
The pictured product was 3d printed in two halves using a green ABS plastic and glued together. I scaled this up to 3.65 for the picture, but that was just because my printer bed is only 6″x6″. Should print fine even larger. The eye whites were filled in with quick-dry white-out and a light green marker was used to clean up the edging around the eyelids. The colored pupils were also made with various markers.
How I Designed This
We thought a horrifying monster from the Underdark would look good on our tree this year, so I made a rough (and printer-friendly) version in 3d. Originally planned on hollowing out the eye stalks for 11 colored lights, but was concerned about stability during the print. -
MakerGeeks 52mm Spool holder 3D Print Model
Summary
Spool holder plugs for MakerGeeks filament rolls.
maker_geeks_52mm_spool_22mm.stl
For use with 608 (8x22x7) bearing
Made the tolerances tight. If you have trouble getting the bearing in, you can put the bearings in the freezer for an hour then install.
maker_geeks_52mm_spool_8mm.stl
For use with 8mm rod.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Yes Infill:
20% -
Christmas star and bells 3D Print Model
Summary
I created a Christmas ornament. Printed them with woodPLA and red bells
Print Settings
Printer:
Anet A8 Rafts:
No Resolution:
.06 Infill:
0% Notes:
Printed both single layer spiral vase. Two stars are glued together back to back. The bells have to be printed slow (<10) to keep detail. -
Tippmann Gryphon FX stock adapter 3D Print Model
Summary
Allow user to install M4 collapsible stock on Tippmann paint gun -
Jeep Wrangler Rubicon 10th Anniversary LED Fog Lights Bracket 3D Print Model
Summary
Made these to install some LED fog lights on my Rubicon with 10th anniversary bumpers. Holes for mounting the fog light to the bracket may need some adjustment (depending on the fog light type/brand), this can be easily done with a dremel tool or small drill.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Infill:
100% -
Chain Harness for Santa Sleigh with Reindeer and Lego minifigures 3D Print Model
Summary
This was already a fantastic design, but I’ve made another harness for the reindeer. This one allows for a reindeer in front (Rudolph!, I glued a pinhead on the nose). Also, it is build of links that form a chain and allow some movement along the harness and you can vary the number of reindeer by adding or subtracting links. Just attach the Start Link to the sleigh and snap the links to it. (The reindeer still have to be glued to the links though).
I’ve added the files for the separate links as well as the collages I’ve used for the assembly with 9 reindeer.
Merry Christmas!
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 3 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2 Infill:
20% Notes:
Alternatively, you can position the links with the t-shaped front down to the building plate. This will save a lot of support, though it might need a raft because it will get relatively tall. -
Schnellspanner 3D Print Model
Summary
Hallo,
hier ist ein Schnellspanner speziell für meine Tron+ Fräse mit Kress Fräsmotor.
Die Spanner passen von der Höhe genau unter die Z-Achse und unter die Spannzange.
Die Rändelmutter ist für die Höhenverstellung um verschieden dicke Platten spannen zu können. Ich fräse damit Balsa- und Sperrholz von 0,5mm – ca. 6mm, dafür sollten die Dinger reichen.
Als Zusatzteile braucht man noch eine M4x30 Schraube und eine M4 Mutter.
Die Schraube habe ich direkt in das Plastik geschraubt ohne vorher ein Gewinde zu schneiden, bis jetzt hält es.
Die Achsen sind in 2 Versionen dabei:
rund zum aufrecht drucken
halbiert zum liegend drucken
ich hab die halbierten gedruck, weil ich denke die sind belastbarer.
Wie immer ist auch ein FreeCAD-File mit dabei.
Haelwe -
Cell 3D Print Model
Summary
A cell I made for a school project.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Doesn’t Matter Resolution:
.15 Infill:
15Standards
NGSS
-
Christmas Ornament “Unto us…” 3D Print Model
Summary
same as others with a more religious sentiment.
Print Settings
Printer Brand:
Up! Printer:
Up Mini -
Laser Cut sword with a fluer de lis design 3D Print Model
Summary
This was designed with 5mm 3 layer plywood that I have. It works out to just over 0.19 inches. The plywood I have is 12 inches by 36 inches. -
Cylon Handgun 3D Print Model
Summary
Cylon Handgun replica from the original Battlestar Galactica TV show. -
Threaded Building Components 3D Print Model
Summary
These are base components that can be used as part of your own creations. They were modeled on a 3.5 ounce Grafco spice bottle. It should be possible for you to scale these up and down within reason and still have them work.
