Download Free 3D Model Creality CR-10 stylish back mirror holder 3D Print Model

Summary
Holders for a mirror of about the bed size on the back of the printer to see what it’s being printed from the back side.
Each holder have a sliding fit that clamps the 20 x 20 mm aluminum profile from the printer’s base frame, and another clamp to hold a 4 to 6 mm thick mirror standing up, matching the printer style, leaving enough clearance for the bed to travel backwards and for printed leveling wheels underneath it.
The first STL is the holder that should be printed twice. The second STL is a set of four bands to be optionally printed on the same color from the printer’s original rubber ornaments, to glue against the holder to improve the printer style matching.
Print Settings
Printer:
Creality CR-10 S3 Rafts:
No Supports:
No Resolution:
0.3 Infill:
20% Notes:
Given the holder’s austere smooth surface, it looks fine even if you increase the layer height.I used 0.3 mm height, and 0.2 for the ornamental bands.
If you print the optional bands, glue them against the holder’s grooves, they should fit perfectly inside them.

Why?
I felt really stupid after buying a 30 x 30 cm mirror, when finding out that being that the printing surface, the bed was actually bigger, leaving me with an extra mirror after buying another one of the bed size: 31 x 31 cm. I don’t know you, if you did the same of if you just bought an extra mirror on purpose (as I now can tell people I did!), for the practical purpose of improve your viewing of the piece being printed.
Hence, here it is: a holder to prove that extra mirror worth every penny.