Summary
w
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Nut&Bolt-based strong G-Clamp with flexible pads 3D Print Model
Summary
Needed a strong G-Clamp to fix things on the shelf. Existing g-clamp model knobs, weren’t as catchy and handy as I would like. Also I have flex filament sample, and decided to add flexible pads, so I recommend you to use plastan/elastan/flex plastic to print them.
Warning! I’ve used 40mm M8 bolt and nut (13mm width hexagonal head), that’s enough for my application. But In order to clamp narrower things, you need a longer bolt, than on my real pictures – more than 65mm M8, with hexagonal 13mm head.
SolidWorks assembly source included, feel free to customize it. Simplify3D factory files included as well.
Print Settings
Printer:
Anet A6 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
30% -
Hex Grid Flow Free 3D Model
A procedural hexagonal grid I put together with animation nodes. I add a few general labels to the node tree, but I’m open to clarifying things further if you have any questions.
The PBR shader was made from Blender Guru’s YouTube tutorial.
Filmic Blender and Cycles were used for rendering. -
10 Gauge Double Barrel Shotgun Free 3D Model
Let us step into the mid/south/west of the United States of America.
Now, in many a country in the past people show their positive opinion for one-another by exchanging their daughters in marriage. -
health bar Free 3D Model
ENG :
a simple health bar with automatic regeneration.
every 5 seconds you will recover 1 part of life. you can change that in the sensor “reinit 5 sec”
the loss of life simulation is performed with the B key on the keyboard.
when you lose all your health, the game is paused with a 2D filter and “Game Over” message. -
Wenge Hardwood Table Free 3D Model
Old simple model that I did for a scene a while ago, this is an updated one, using a material done in Substance Designer.
The textures included here are the 2k ones, otherwise the file would be too heavy to upload, but you can download the 1k and 4k versions of it here: https://gumroad.com/products/kpIm -
little kitty Free 3D Model
this is something i make like 2 years ago in a practice(sorry bad english) i think i lose this when i erase all on my pc but i find it and now i post it here because….why not? the rig is so dump and i am so lazy to fix it, if someone want to fix it just take it, i dont care
-
WINE BOTTLE CHATEAU MARGAUX 2000 EDITION Free 3D Model
Made this for my scene hope u like it, this wines are currently valued at 15 000. anyways be free to download this model
-
Educational Automotive Alternator 3D Print Model
Summary
THE EDUCATIONAL ALTERNATOR
☼ Check out the video I have done showing the Alternator being taken apart and re-assembled below! ☼
YouTube – 3D Printed Educational Alternator
This 1:1 scale alternator features over 30 pages in the lesson to help you teach your students or to follow along to teach yourself. The lesson covers all aspects both internally and externally on the Alternator. You’ll have a complete understanding on how they work. You can test yourself with the included Quiz and, the documentation covers 3D printing and assembling your very own Alternator Model.
How I Designed This
The complete Brake Caliper project was designed in Autodesk Fusion 360
Tolerances are important when 3D Printing. The tough part is ensuring your print will work with everyone’s desktop 3D printer. This can be quite a challenge.
With the Educational Alternator, the fit of most pieces of the caliper were set with ~.5-.7mm tolerances in SLS Technology.
My initial planning of the Alternator was to have the ability to pull the alternator part, pull the pieces off and re-assemble so you can see the inner workings and all of the components of an Alternator.Standards
CCSS
Overview and Background
Are you curious how an automotive alternator works? Do you know that all vehicles on the road today have an alternator that is used to charge your vehicle’s battery allowing you to run your headlights, stereo and even to charge your cell phone. Alternators play a crucial role in your vehicle and I have set out and put together this comprehensive lesson to help educate our youth and anyone else curious about vehicles.
While it is great to read and learn about alternators, there is really no substitution for holding a physical part in hand and having something to look at up close. Along with the extensive lesson included, I’ve gone into great detail about the 3D printing aspect of the Alternator and walk you through the process of making your own alternator. This will make it a great project for your class to participate in.
The Alternator is suitable for FDM, SLA & SLS printing and has been made to fit together very well. I have included Rotor-Hollow.STL and Stator-Hollow.STL for use in SLA & SLS printing technologies. The lesson includes pertinent information relating to settings needed while 3D Printing. I’d like to thank everyone for checking out my project and I am always thrilled to hear about my projects helping to teach kids and adults all over the globe. 3D Printing is a powerful technology and education is important for our youth. Lets make learning fun! ☺
Lesson Plan and Activity
You’ll find a complete document attached to this model titled, “3D Learn About – Alternator.PDF”. In this document, we will cover all aspects of an alternator from the inside out. Here are just a few of the topics covered in the included document:
Alternating Current to Direct Current
3-Phase Winding’s
Bearings
Magnets
This automotive alternator is built to scale with only a few minor modifications to allow it to be 3D printed in the classroom. It is a Bosch alternator from a Chevrolet truck and uses only 3 bolts to help fasten it together, the rest of the alternator is completely 3D printed.
Materials Needed
(3) – M5x75mm/3″ bolts
(3) – M5 Nuts
Skills Learned
automotive
electromagnets
vehicle
generators
alternators
alternating current
direct current
electronics
voltage
power
Duration of Lesson
1-2 HoursAlternator Video
Learn about the 3D Printed Alternator
-
Murdocs Necklace 3D Print Model
Summary
Murdocs Necklace from the band Gorrilaz, I recommend gold filament -
Monoprice Select Mini E3D V6 heat sink adaptor 3D Print Model
Summary
This is a bracket for holding the Bowden stype E3D V6 heat sink/hot end on the Monoprice Select Mini. It is sized so that it will be at the same level as the original that came with it so no adjustment to the z axis limit switch is necessary.
I used 2.5mm melt in threaded inserts, available from McMaster Carr:https://www.mcmaster.com/#94180A321.
I used 3mm melt in inserts for the clamp that holds the heat sink in, again from McMaster Carr.
Installation tool is right next to it on order page. You can also use a nut with a through drilling if you like.. -
CR-10 Mini X-Axis cover with wire tie 3D Print Model
Summary
remix of a CR-10 part to fit a CR-10 Mini, shortened the wire tie that sticks out, also moved it out of the way of the plug for the x-axis motor. i opted to use higher infill in printing becasue the wire tie part broke off my first print as i was puting it on the machine.
Print Settings
Printer:
HICTOP CR-10 Mini Rafts:
No Supports:
No Resolution:
.15 Infill:
50% Notes:
printed 2 shells, 3 bottem/top layers, bottem/top 30mm/s, rest was printed at 60mm/s
How I Designed This
remixed using fusion 360 -
Milwaukee M12 Battery Cap 3D Print Model
Summary
Cap for Milwaukee M12 Battery
Also an attempt to model the battery and base – but they aren’t complete -
Mishinoto keychain 3D Print Model
Summary
Mishinoto keychain -
Mira Free 3D Model
This is a three wheel micro car based on real Peel P50 car. High resolution model with simple interior, materials only.
-
Simple House Free 3D Model
Something I made last month (Oct) but never got around actually using. Or finishing.
-
Demogorgon Free 3D Model
This is a simple model based on Stranger Things season 1 TV series.
Has Rigging and simple skin texture. -
![Blender Letter pack [AZ Trippy Pcak] Free 3D Model](https://3dhunt.co/static/2017/11/a62396ddeba364ffae330e2ef7de4486.jpeg)
Blender Letter pack [AZ Trippy Pcak] Free 3D Model
A Blender letter pack is a Blend File that contains all letters in the Alphabet
-
Stethoscope | Medical supplies | Medical equipment Free 3D Model
Stethoscope Medical equipment light weight and easy to use in a hospital scene or on a doctor character.
-
Coleman-Inspired Naphtha Lantern Free 3D Model
It is a lantern! It is green. It has materials, is UV mapped with non-overlapping UVs. I’m not very good at particle effects, so the light isn’t very pretty, but it will suffice.
-
ParaTank_215 5″ FPV Racing Drone Quadcopter super light & sturdy 3D Print Model
Summary
Made for micro-swift type cams (19mm width).
ParaTank_215 5″ race quad with swappable arms.
Slightly beefier than typical race frames but still at only 66g with awesome CG (top or bottom mount optional), slotted arms, cam protection (runcam micro type) and super low body and arm profile for minimum air resistance and loss of thrust… Also with printable arm tpu arm protectors+motor softmounts (And it looks cool) 😀
Mill it youself or get it in Armattan CF (67g) here:
https://armattanproductions.com/pages/kit_detail/1449 -
FreeCAD Gears 3D Print Model
Summary
Not a model for anything in particular, nor is it meant for directly printing, but just an easy way to make gears.
Contains a spreadsheet where you can enter the number of teeth you want, how far apart the gears are, and how thick they should be.
Holes for shafts and keyways can then be made using sketches and cut out of the gears.
Made with FreeCAD 0.17 (build 12643), may not work with other/earlier versions.
Ignore the STL file, thingiverse apparently wants some sort of model file for the thing to be valid and doesn’t recognise FreeCAD files as being valid design files.
[email protected]!$ Come on thingiverse, FreeCAD has been around forever. Get it together. -
Biped Robot 3D Print Model
Summary
This is based on the University of Michigan Robots, I added a gun and an arm with attachments -
ROBOT SANTINO 3D Print Model
Summary
robot -
X Axis Ends Tronxy Zonestar P802 3D Print Model
Summary
Recently stumbled upon this terrific set of X-Axis ends for a P3Steel printer. (https://www.thingiverse.com/thing:2088585) Since the P3Steel uses the same 17MM spacing on the leadscrew and vertical smooth rods I wanted to print these for my old beater Tronxy P802M. The only problem is horizontal rod spacing. Most printers like the Anet and P3Steel have 45mm spacing between the X-axis horizontal rods. The Zonestar and Tronxy are 44mm. This would be a problem as I want to use my original carriage.
After looking at the above linked Thing I see the designer was kind enough to include the STEP files for his parts. This was just what I needed. After importing the STEP files into Fusion 360 modifying the rod spacing was a snap.
So as a courtesy to the original creator and to give back to the community here is my set of X-axis ends specifically for the Tronxy and Zonestar P802 printers.
The only change from the original Thing is to move the holes so they are 44mm apart on the horizontal carriage rods.
You will also print out the tensioner parts as detailed on the original Thing’s page (https://www.thingiverse.com/thing:2088585)
Print Settings
Printer:
Monoprice Mini Select Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
30% Notes:
Print with the top of the part facing down. Be sure to use supports. The automatic supports generated in Simplify 3D worked perfectly. -
Business Card Holder (Customizable) 3D Print Model
Summary
You can customize this to the size of your business card, and set your own text for the cover. Unfortunately, OpenSCAD can’t detect the size of the text, so you’ll have to adjust the font size manually to get the text to fit properly.
The provided STL is for visualization and not for printing. Use customizer to create your own STL, or download the scad file for use in OpenSCAD. -
FocBoc (VESC) + BMS + Receiver for eSkate Electric Skateboard 3D Print Model
Summary
I modelled this for my custom built electric skateboard to house my FocBox, a BMS (from Bestech) and a radio receiver. I haven’t test printed this yet. -
Fallout Phone Case 3D Print Model
Summary
This is my remix of the basic Iphone case. I outfitted it with a fallout theme. -
USB Solar Battery Pack 3D Print Model
Summary
Here we have a Solar Battery Charger for all your gadgets. Charger includes a 2W solar panel, USB 5V step up, one 2000 mAh 3.7v 18650 Lithium battery and a TP4056 charge controller. I designed this to charge in one day of full sun, you can certainly add more batteries for your project if you’d like. This can also be charged via the micro USB. Parts snap together, I glued mine as I don’t plan on opening it but my first prototype was not glued and is still in holding up well, even printed in PLA. I printed the parts in ABS for the final version at 50%.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
.2 Infill:
50% -
Slingshot 3D Print Model
Summary
This is just a quick design that I sketched out. Hope you like! you will probably need to change the size. -
Desk Hook for Can 3D Print Model
Summary
I was tired of constantly moving my Diet Coke around my desk and forgetting where I put it as I worked on projects, so I made this handy Can Holder that clips to the edge of my desk. It’s specifically designed for the dimensions of my workbench, so that the bottom clips into the support member that runs along the front of the desk.
The clip consists of two pieces – a hook and arm, which both attaches to the desk and supports the weight of the can; and a ring, which prevents the can from tipping off. There are small taps projecting from the ring, which lock into slots in the arm to secure the ring in place without adhesive.
Works with 12 oz. bottles as well.
Print Settings
Printer:
Wanhao i3 V2.1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% -
Wizard x220 POD with screw silos 3D Print Model
Summary
Haven’t gotten to print it yet but I have spent hours designing it in fusion. The dimensions are solid. There are “screw silos” to hold down the pod, insert a 3m nut into the area designed for it, screw the screw in from the bottom to hold it down. There are two versions, a 20mm stack and 30mm stack option. The camera holes were designed to offer up to 45 degree camera angle for a runcam swift 2 or similar casing. I would recommend printing in TPU semi flex, or nylon if your printer is calibrated well. There is very little margin left for error in printing when in a hard material. -
Pen holder for CNC 3D Print Model
Summary
Pen holder for a home/hobby CNC. This thing is designed to be used with two 1/4-20 bolts. One screws in from the flat side and is chucked into the router’s 1/4″ collet. The other is used to lock in the pen or pencil. Neither of the holes are designed with threads inside. I printed at 60% infill so it wouldn’t flex while drawing and there would be plenty of material for the bolts to cut threads into.
Set the pen so it looks like the tip is in line with the spindle center. Lower the Z axis until the tip touches a piece of paper. Rotate the spindle/collet 360 degrees. If the pen draws a circle, it needs to be adjusted. If it stays in one spot and just makes a dot, you have it set correctly.
The pen slot is sized based on a standard Sharpie Permanent Marker, with about an extra millimeter of radius for slightly larger pens. The side opposite the set screw is tapered to a point to accept smaller diameter pens too.
Print Settings
Printer:
Clone of a FlashForge Creator Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Infill:
60 -
Locker 3D Model
Additional Info: Locker Annibale Colombo W1393 N101017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Saint Seiya – Seiya de Pegaso 3D Print Model
Summary
Un nuevo modelo de los caballeros del zodiaco !!!
Espero lo impriman y compartan sus obras de arte de estos fantásticos personajes de uno de mis animes favoritos!!! -
Foldable quadcopter FPV 3D Print Model
Summary
This project is not completed yet … however for those who is interested in there is also FreeCAD file available. -
D&D Dice Box 3D Print Model
Summary
A remix of my existing dice box. It is modified to contain a standard set of 7 polyhedral dice and have a larger rolling tray. Additionally, definition to the book pages has been added. -
Laser Cut Chistmas Scene 3D Print Model
Summary
In order to build this Christmas scene you gonna need a 2,50mm thick sheet of something that can be laser-cuted. Here we use a thin sheet of MDF like (used pcb industry for shipment)
We cut it thanks to a Gravograph LS100IQ with following params:
Power 100%
Speed 15%
We use wood glue to maintain the cohesion of the whole.
Advice: Glue everything in the order of your choice, just keep the top piece for the end.
Enjoy! -
3D Tank Free 3D Model
Tank AMX-56 amx 56 Leclerc MBT military heavy army desert modern vehicle armored gun war camouflage weapon combat battle artillery French
-
Real-Time Airplane Messerschmitt Me-262 A1 Free 3D Model
model game real-time military aircraft airplane germany me262 jet fighter air force worldwar2 ww2 japan pbr lowpoly mid poly realistic
-
Hork-bajir 3D Print Model
Summary
This is a Hork-bajir, an alien from the Animorphs books series (copyright Scholastic). Big thanks to YahooJapan, for their extensive database of models that I drew upon for parts to combine in Meshmixer, in order to make the various Animorphs aliens. -
Arizona Cardinals Logo (Football) 3D Print Model
Summary
For dual extruder. Change the black to red at the red level, change the white to orange and the right level.
For a single extruder use the Cardinals x3g file, which was created in Mackerware slicer software.
How I Designed This -
Zen Watch 2 Protector Case 3D Print Model
Summary
Remixed from JimmyHoffaHendrix’s case. Simplified the geometry and tightened the fit.
Print Settings
Printer:
Prusa i3v (MakerFarm) Rafts:
No Supports:
No Resolution:
0.3mm Infill:
100% -
Airsoft Swipe Phone 3D Print Model
Summary
Plastic dummy phone with fun swiping action to keep your mind off checking your messages every 5 seconds. Takes six 6mm plastic airsoft BBs. Simply pop them in with as much force as needed. Harbor freight sells hydraulic presses, or you might find a friendly steamroller driver at a nearby active construction site. -
Kinetic Aerial Spear-X FPV Camera Mounts 3D Print Model
Summary
Simple FPV camera mounts to fit either 1177 style camera or the Micro.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
.20 Infill:
100 Notes:
TPU/TPE -
Sofa 3D Model
Additional Info: Sofa Kalinka 06 N241017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Sdkfz 11 3D Print Model
Summary
Remix of Bergmans 1:100 Sd.Kfz 11 with closed canvas top. Tracks and (improved) wheels are separated, some minor details added. -
Fruit fly trap 3D Print Model
Summary
Get rid of the annoying fruit flies (Drosophila). Well, it is a war you probably cannot win completely, but you can significantly reduce their numbers.
1) get a suitable glass or cup – so you can see inside.
2) measure the rim diameter and scale the print to fit your glass. If you print slightly big, you can easily fix it binding a tape around the glass rim.
3) drill cca 1-1.5 mm holes to the inner cones. Make lot of holes, so that the flies can smell the lemon. See the pictures – I have cca 6 holes per cone and it worked fine. Also drill a hole at the tip of the cones if it prints too tiny. Too big – they will find a way out. Too small – they will stay outside…
4) take a squeezed lemon, put it in the glass, close it with the trap and see the flies coming in.
5) make sure to empty the glass before the lemon gets mildew or is rotten. It is clever to open the trap outside your living quarters 🙂
6) use lemon or other fruit that is loved by the flies. I have tried a lemon concetrate juice and the flies ignored it… -
Octoprint discoeasy 200 pi zero W case 3D Print Model
Summary
Coque pour octoprint sur Raspberry Pi ZERO W sur discoeasy200 a fixer sous l’écran
photos a venir -
cooking pot toy 3D Print Model
Summary
A quick design – simple yet useful toy for child cooking. Prints without supports, the handles may be a little challenge for the printer but somehow it printed quite well at the original size. The wall may be too thin, but it endured the child play for several months (until someone stepped on it 😉 -
Shoe Rack Free 3D Model
Mid Century Shoe Rack.Rendered In 3ds Max VrayOBJ. and FBX. files includedExternal 2d textured files included.
-
Twist in line level holder/bracket for 2020mm, 2040mm 3d printer frame. 3D Print Model
Summary
Twist into aluminium slot to hold line level with line nubs removed. The HD Empire line level was used for sizing.
Print Settings
Printer:
CR-10s Rafts:
Yes Supports:
No Infill:
20% -
Drop through longboard risers / shock absorbers 3D Print Model
Summary
Designed these to add some shock absorption to my longboard with TPU risers and reduce the teeth-rattling feeling I had going over cobblestones. These fit standard drop-through trucks and match the hole pattern for mounting. They’re 2mm tall which allowed me to fit them without getting longer screws for the truck mounts, use the scale z command if you’d like them thicker/thinner.
These were printed with Ninjaflex Semiflex on Ultimaker 2+ with 100% infill
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Rafts:
No Supports:
No Resolution:
0.1 Infill:
100 Notes:
Ninjaflex Semiflex prints well slowed down to 20-40mm/s and retraction off.
Post-Printing
Cleanup
Cuticle trimmers work great for removing TPU blobs stuck to the printed surfaces.
How I Designed This
Designed in Fusion 360, feel free to download and edit: http://a360.co/2AewbDs -
Cr-10 2020 spool holder 3D Print Model
Summary
a spool holder for the Cr-10, it fita on 2020 bars needs a 2cm (D) PVC pipe. -
LED Light Bracket for Dept 56 House 3D Print Model
Summary
I didn’t like having to run the 120v cords into a bundle for our Department 56 Christmas village. It always seemed like a fire hazard.
I have designed this bracket to replace the original bracket and cord. I plan on attaching small LED lights to this and then wiring all this at 9-12 volts depending on how bright the lights end up being.
Print Settings
Printer:
Maker Select Rafts:
Yes Supports:
Yes Resolution:
.02 Infill:
25% Notes:
I did this with rafts and support, you probably don’t need the support but i did the raft because the wings are so thin. I have not printed without them.
Post-Printing
When I get finished with the project I will add more pictures and links to the material used to finish this out.
How I Designed This
I designed this in tinkercad. -
Vent clip cell phone caddy 3D Print Model
Summary
This is an item that I created on Inventor for class.Overview and Background
cell phone holder
This is a holder for a car that attaches to the vent clipl
Lesson Plan and Activity
cell phone holder
I created this for my intro 3d printing class -
Drawers support template – Support tiroirs gabarit – 1U 3D Print Model
Summary
le gabarit pour supporter 1 tiroir.
peut être coller à d’autre pour créer un support à son gout (un support 2×3 est en imagination …) bref faites vous plaisir. -
G27 Clamp screw 3D Print Model
Summary
This is a screw for Workbench3D’s clamp 🙂
To make it easier to print, I’ve separated the model. (and also the thread has been rounded)
Glue them together and replace with broken one :3
I’ve also added STEP file!
You can modify this and make your own designed grip for it :)If you do so, please let me know xD
Note:
Unfortunately, this thing will NOT fits to the original clamp at this time.
Print Settings
Printer:
Geeetech MeCreator 2 Rafts:
No Supports:
No Resolution:
0.05mm Infill:
30-100% Notes:
with PLA, 0.2mm layer height.
The grip doesn’t need so much high infill percentage, but you definitely print the connector and thread with 100% infill. (otherwise, you will broke it pretty easily)
To get better layer adhesion, increase your extruder temperature just a little bit (approximately 5-10 degrees). -
Honor 8 simple case 3D Print Model
Summary
This is just a case for my Honor 8
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 mm or less Infill:
100% -
Decayed wood trunk Free 3D Model
Decayed wood trunk, Louvain-la-neuve, Belgium. Made with ReMake and ReCap from AutoDesk.
For more updates, please consider follow me on Twitter at @GeoffreyMarchal -
Jura Capresso Ultima 121 Charging Lever 3D Print Model
Summary
Made for a coworker. Tested and works.
Print on Side
Supports: Yes
Raft: No
0.1-0.2mm Height
3 walls, 100% Infill (Went overkill to give the part the best chance.
You will need a paperclip to glue and snip flush at the end that hooks to the retraciton spring.
