Additional Info: Mirror stand – 3D model (*.gsm+*.3ds) for interior 3d visualization.
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Rack 3D Model
Additional Info: Rack 4 N140817 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Box for Sonoff TH10 & TH16 3D Print Model
Summary
Box for one Sonoff TH10/TH16 with holes for two pg9 cable glands and a rocker switch. Room for temperature/rh sensor separated from board with a wall. Lid is thin around LEDs, and has a hole for accessing button on the PCB.
Sensor has to be soldered on.
Some 3mm screws are required to fasten lid and PCBs.
16A Rocker Switch: http://preview.tinyurl.com/yc4umcp6 (for your confidence), http://tinyurl.com/yc4umcp6 (direct to Aliexpress)
Why? Don’t like the look of the original Sonoff box… -
KIA Soul Embleme 3D Print Model
Summary
Austausch Embleme für Kia Soul 09 Vorne/hinten
Print Settings
Printer:
TEVO Black Widow Rafts:
No Supports:
No Resolution:
0.1-0.3 Infill:
10% oder 100% Notes:
bei 10% Füllung Gut Kühlen beim Drucken -
PTFE Holder for 8mm Screw Bar 3D Print Model
Summary
I make this thing for guide the ptfe tube for my extruder.
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
Gasbremse Luftgewehr 3D Print Model
Summary
Gasbremse für Black OPS Luftgewehr
Print Settings
Printer:
TEVO Black Widow Rafts:
No Supports:
No Resolution:
0.1-0.3 Infill:
10-15% -
Soft robot 3D Print Model
Summary
This is a soft robot project I have been working on. I have done a complete write-up here. -
Beholder Tree Ornament 3D Print Model
Summary
Just a fun little tree topper, designed for my old Solidoodle 2 (0.3mm). Both sides have no real overhangs and make for an overall (mostly) hassle-free print.
Post-Printing
The Final Product
The pictured product was 3d printed in two halves using a green ABS plastic and glued together. I scaled this up to 3.65 for the picture, but that was just because my printer bed is only 6″x6″. Should print fine even larger. The eye whites were filled in with quick-dry white-out and a light green marker was used to clean up the edging around the eyelids. The colored pupils were also made with various markers.
How I Designed This
We thought a horrifying monster from the Underdark would look good on our tree this year, so I made a rough (and printer-friendly) version in 3d. Originally planned on hollowing out the eye stalks for 11 colored lights, but was concerned about stability during the print. -
MakerGeeks 52mm Spool holder 3D Print Model
Summary
Spool holder plugs for MakerGeeks filament rolls.
maker_geeks_52mm_spool_22mm.stl
For use with 608 (8x22x7) bearing
Made the tolerances tight. If you have trouble getting the bearing in, you can put the bearings in the freezer for an hour then install.
maker_geeks_52mm_spool_8mm.stl
For use with 8mm rod.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Yes Infill:
20% -
Christmas star and bells 3D Print Model
Summary
I created a Christmas ornament. Printed them with woodPLA and red bells
Print Settings
Printer:
Anet A8 Rafts:
No Resolution:
.06 Infill:
0% Notes:
Printed both single layer spiral vase. Two stars are glued together back to back. The bells have to be printed slow (<10) to keep detail. -
Tippmann Gryphon FX stock adapter 3D Print Model
Summary
Allow user to install M4 collapsible stock on Tippmann paint gun -
Jeep Wrangler Rubicon 10th Anniversary LED Fog Lights Bracket 3D Print Model
Summary
Made these to install some LED fog lights on my Rubicon with 10th anniversary bumpers. Holes for mounting the fog light to the bracket may need some adjustment (depending on the fog light type/brand), this can be easily done with a dremel tool or small drill.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Infill:
100% -
Chain Harness for Santa Sleigh with Reindeer and Lego minifigures 3D Print Model
Summary
This was already a fantastic design, but I’ve made another harness for the reindeer. This one allows for a reindeer in front (Rudolph!, I glued a pinhead on the nose). Also, it is build of links that form a chain and allow some movement along the harness and you can vary the number of reindeer by adding or subtracting links. Just attach the Start Link to the sleigh and snap the links to it. (The reindeer still have to be glued to the links though).
I’ve added the files for the separate links as well as the collages I’ve used for the assembly with 9 reindeer.
Merry Christmas!
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 3 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2 Infill:
20% Notes:
Alternatively, you can position the links with the t-shaped front down to the building plate. This will save a lot of support, though it might need a raft because it will get relatively tall. -
Schnellspanner 3D Print Model
Summary
Hallo,
hier ist ein Schnellspanner speziell für meine Tron+ Fräse mit Kress Fräsmotor.
Die Spanner passen von der Höhe genau unter die Z-Achse und unter die Spannzange.
Die Rändelmutter ist für die Höhenverstellung um verschieden dicke Platten spannen zu können. Ich fräse damit Balsa- und Sperrholz von 0,5mm – ca. 6mm, dafür sollten die Dinger reichen.
Als Zusatzteile braucht man noch eine M4x30 Schraube und eine M4 Mutter.
Die Schraube habe ich direkt in das Plastik geschraubt ohne vorher ein Gewinde zu schneiden, bis jetzt hält es.
Die Achsen sind in 2 Versionen dabei:
rund zum aufrecht drucken
halbiert zum liegend drucken
ich hab die halbierten gedruck, weil ich denke die sind belastbarer.
Wie immer ist auch ein FreeCAD-File mit dabei.
Haelwe -
Cell 3D Print Model
Summary
A cell I made for a school project.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Doesn’t Matter Resolution:
.15 Infill:
15Standards
NGSS
-
Disk milling cutter Free 3D Model
Model dimensions:- diameter – 100 mm- width – 20 mmRendered in Keyshot 5.0.99.
-
Nick Wilde from Zootopia Free 3D Model
This is NOT my work. the only thing I did was the IK arms. Everything else was made by John2903.
Check his model out: https://www.blendswap.com/blends/view/87031 -
Drying Machine Free 3D Model
Drying Machine (15,273 vertex), Laundry basket (76.437 vertex). Simple Materials. All modifiers are applied. Good luck to all.
-
Baptismal Angel Free 3D Model
Baptismal Angel (A110) , 1823, Bertel Thorvaldsen (1770 – 1844), plaster, height: 1.80m. Thorvaldsen Museum (Copenhagen, Denmark). Made with ReMake and ReCap pro from AutoDesk.
-
Christmas Ornament “Unto us…” 3D Print Model
Summary
same as others with a more religious sentiment.
Print Settings
Printer Brand:
Up! Printer:
Up Mini -
Laser Cut sword with a fluer de lis design 3D Print Model
Summary
This was designed with 5mm 3 layer plywood that I have. It works out to just over 0.19 inches. The plywood I have is 12 inches by 36 inches. -
Cylon Handgun 3D Print Model
Summary
Cylon Handgun replica from the original Battlestar Galactica TV show. -
Threaded Building Components 3D Print Model
Summary
These are base components that can be used as part of your own creations. They were modeled on a 3.5 ounce Grafco spice bottle. It should be possible for you to scale these up and down within reason and still have them work. -
Roses 3D Model
Additional Info: Roses basket N291017 – 3D model (*.3ds) for interior 3d visualization.
-
Nightstand 3D Model
Additional Info: Nightstand – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Z Axis Bearing Holder 3D Print Model
Summary
Z Axis Bearing Holder 1.0 for 3030 profil
Print Settings
Rafts:
No Supports:
No Resolution:
0,2 Infill:
30-50 -
SDHC/MicroSD card case holder with flanges 3D Print Model
Summary
This is a wall/rack mountable holder for the plastic cases SDHC/MicroSD cards come in. It’s designed to be screwed into the wall or onto the face of a 1RU rack panel. You could also foam tape it to whatever you want. It’s angled upwards to keep the cards from falling out easily, and the inside is tiered so that cards at the top stick out further than cards at the bottom. This makes it easier to remove the cards.
I have another similar design (“SD Card Holder with mounting flanges”) for SDHC cards without cases.
Prints easily with pretty much anything. I’m using cheap PLA and it works fine with no supports when oriented in the obvious direction (flange side down). The base of it is a big ol’ plastic rectangle so you’ll have the usual gotta-pry-it-off-the-bed issues you get with any piece with a wide base. You could use a raft if that’s an issue for ya.
It’s 171mm wide so on a Lulz Mini you have to orient it diagonally to fit and you might have to tighten up your skirt a bit to keep everything on the bed.
Print Settings
Printer Brand:
LulzBot Printer:
Mini Rafts:
No Supports:
No Resolution:
I did 0.3mm Infill:
20% worked Notes:
It’s 171mm wide so on a Lulz Mini you have to orient it diagonally to fit and you might have to tighten up your skirt a bit to keep everything on the bed. -
Air Jordan Logo 2D Art 3D Print Model
Summary
This is an extruded model of an old fashioned Air Jordan logo. It fits in a constraint box roughly 7.5 cm by 3.5 cm. There are 4 different layers of extrusion, as each layer of wings is extruded 0.2 cm higher then the next. The ribbon is included in the first layer, and the final layer contains just the basketball. We also included 2 different extruded cuts, one for the lettering and one for the lines on the basketball.
In the final printed product, for the most part the piece came out pretty good except for some failure on the small detailed letters and basketball lines. Because of this, I recommend when printing scale by at least 150% of the original STL fileOverview and Backround
This is the source image our design is based off of.
Lesson plan and Activity
Problem Statement –
With a partner, you will design a “2D” placard using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.
Constraints –
Should have a flat back; detail will be on the front side
Should fit inside a box that is 25cm2 when lying flat
Should be no more than 1cm thick
Detail will be made using sketches that are extruded to different heights
Sketch must begin with a constraint box, (a center-rectangle created from the origin)
Dimensions should be detailed but efficient
Sketch must contain zero error messages
Sketch must be fully defined when complete
Demonstrate efficient use of “Construction Lines”/”Reference Geometry”
Demonstrate efficient use of “Offset Entities”
Demonstrate efficient use of “Manual Relations”
Demonstrate efficient use of “Smart Dimensions”
Demonstrate efficient use of “Mirroring”
Demonstrate efficient use of “Linear Patterns” -
Seathipede-class Shuttle Holder (X-Wing Miniatures) for Stanley organizer 3D Print Model
Summary
There is an english and a german version. They only difference is the text (“Sheathipede Shuttle” or “Raumfähre der Sheathipede-Klasse”) and the position of the rebel symbol.
This thing follows Lord_Dowrkins idea and adds a storage box the Sheatipede-class Shuttle. The following text is mostly copied from him (except of my notes).
I use the Stanley 25-Compartment Organizers for my X-Wing Miniatures collection, and have tried many solutions for maximizing space and keeping the models safe. I reviewed most of the similar designs on Thingiverse, but there were none that had everything I wanted. So I started to design my own series, and based on my collection (I own at least one of almost everything, including Epic (note: I don’t own any Scum, so don’t expect any Scum ships to be added. I do own everything else)).
My design goals:
Maximize Space
Attractive Presentation
Include the pilot cards (note: unline Lord_Dworking i’ll never do so)
Include the movement dials whenever possible (note: unlike Lord_Dworkin i’ll try to always do so)
So, here is my design for the Sheathipede-class Shuttle, holding also one dial.
This will fit the Stanley 25 Compartment Organizer (https://amzn.com/B00005QWYF) or the Harbor Freight 20 Compartment version (https://www.harborfreight.com/tool-storage/part-storage/19-bin-portable-parts-storage-case-93928.html).
As I complete and post more of this collection, I will link them here as well. (note: i also include links to Lord_Dwonkins, but not the other direction)
A-Wing
B-Wing
E-Wing
K-Wing
Sabine’s TIE Fighter
Sheathipede-class Shuttle
T-65 X-Wing
T-70 X-Wing
U-Wing
YT-1300
YT-2400
TIE Bomber
TIE/fo-Fighter
Movement Dial Holder (7x) -
Phoneside Cover – version 2 3D Print Model
Summary
COVER available for :
iphone4
iphone5
iphone6
iphone6+
samsungS5
samsungS6
samsungS7
HOLDER available for :
holder mini : for laptop
holder maxi : for computeur screen
Soon costumizable, Rest in touch !
Comments are welcoms !
Post-Printing
Need some foam rubbber.
Photos available soon. -
Chandeliers, lamps Free 3D Model
Different chandeliers and lamps. Different materials for intrenal and for cycles. All modifiers are applied. Good luck to all.
-
Anvil Free 3D Model
Following Andrew Price tutorial i decided to sculpt the detail on zbrush, and bake the high poly mesh with the lowpoly on Substance painter, achieving the result i wanted.
-
Nikon P510 camera (2.79) Free 3D Model
This is a replica of the Nikon P510. The textures look much better in rendered mode.This model has 20,887 faces and 23,218 verts and was made using blender 2.79 in cycles.
-
cycles: servo motor (2.79) Free 3D Model
this is a servo motor made in blender cycles 2.79. If you dont know what a servo motor is it basically a motor that has a propeller shaped object on the top and rotates 90 degrees in each direction its mostly used for radio control cars to steer the wheels.
item specs: faces 33,624: Verts 33,526: Engine: cycles: time to render: 1min 4secs -
cycles google android logo rigged (2.79) Free 3D Model
this is the google android logo he is fully rigged but has no animations or shape keys.
item specs: faces 4,905 : Verts 4,901 : Engine : Cycles: Time to render: 1min 14secs -
Blirp_HQ_Ready To Animate Free 3D Model
Here is a complete production-ready character that I have made for the Blender community. I hope the rig is not too difficult to use. I tried my best to make it beginner friendly.Since I am the creator and owner of the character and the concept, I give permission to use it for both commercial and non-commercial use, as long as credit is given.
-
Bee Free 3D Model
a bee made with Three basic shapes for the body and Head , added eyes , 4 wings and 6 legs
I made I leg and duplicated it , same with the wings , the wings are transperant
It looks alittle like a wasp and its hard to make it more like a bee . -
TOYOTA MINUTE-S (SVG stenciling) Free 3D Model
Inspired by this Advanced Subsurf Modeling – Techniques to Avoid Pinching by CG Masters
https://www.youtube.com/watch?v=3rlMzsBWtP, I just aimed at smooth surface.
Take a look at the white logos those are made with Illustrator vectors via SVG wrapped up over the surface using shrink-wrap modifier not uv unwrap. that brings couple of benefits: high quality without dither. makes it simple and easy XYZ projection map even it’s roughly placed not to be stuck with pinching proportions along with modeling geometry for details .
After my investigations, offset 0.03 seems to be good. just on surface with slight emboss like a realistic sticker or cutting seat.
I’m still not able to get the fiber texture pinching within my skill about node manipulating -
Low Poly medieval Tower Free 3D Model
I made in blander a Low Poly medieval Tower.
866 verts
775 faces
1598 tris -
Tileable Scratches and Brick node setups. Free 3D Model
Tileable Scratches and Brick node setups inspired by Substance Designer software.
-
Ocean Creator II Free 3D Model
This is the version II of my ocean creator python script. It can now generate a realistic ocean shader with foam.
-
Snowflake Fidget Spinner 3D Print Model
Summary
A fidget spinner shaped like a snowflake.It is very large and needs a 200×200 bed surface.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Doesn’t Matter Infill:
10%
Post-Printing
Add a bearing and bearing caps. -
Awesome Epic Puzzle Box 3D Print Model
Summary
2 slider Chinese puzzle box. 9hr print. Can print custom paths for unique combinations.
18 moves to open.
Based on Bruce Viney’s Impossible Odds at: http://www.homemadepuzzles.co.uk/index.html
Designed for my Design Print Build youtube video series.
Requires 10x m3-8mm bolts.
Printed at .25mm layers, .4mm nozzle, 50mm/s 2 wall, 20% infill. Very little sanding required.
May require supports touching bed on Front and Back panels, that hold the sliders.https://www.youtube.com/watch?v=wRqW6jQDPlY -
Martian 3d frame. 3D Print Model
Summary
A friend of mine crashed and broke his drone frame, and I had some spare martian arms (yes they are all the same) and put this together for him. It actually flies like the carbon frame. If you want to build a cheaper frame then the already cheap martian frames off ebay and banggood, try this one!
I added some improvements for zap strapping things to the top plate.
Buy these ones, you’ll need 4 of them and some standoffs, screws, nuts, ect….https://www.banggood.com/Martian-190mm-230mm-255mm-Carbon-Fiber-4mm-Arm-Kit-p-1052454.html?rmmds=search&cur_warehouse=CN -
Porsche 911 3D Print Model
Summary
nice carStandards
NGSS
CCSS
Overview and Background
decoration
Lesson Plan and Activity
impress youre friends
Materials Needed
anything 3D printable -
Mercedes Benz Trim Retainer Nut 3D Print Model
Summary
These nuts are used to retain the tailights in Mercedes Benz W163 ML series SUVs.
Over time the factory nuts come loose and the thread becomes worn and they no longer hold the tail lights correctly, resulting in wobbling lights, damaged bulb filaments, and large unsightly panel gaps
This replacement nut takes about 20 minutes to print with a 0.1mm layer height.
This is very similar to the interior carpet retainer nut used on many models on Mercedes Benz that era, so may be able to be used to retain carpet too.
I’ve designed this without an internal thread inside the nut. The factory retainer is threaded onto tapered self tapping thread fixed onto the vehicle. It should be forced onto the thread with a 10mm socket, so that the vehicle thread bites into the plastic to retain the nut. Make sure you clean the thread of old sealants or plastic for a good bite. -
Bed 3D Model
Additional Info: Bed round N131017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Luster 3D Model
Additional Info: Luster C110230 8 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
E3d 40mm Fan Mount 3D Print Model
Summary
First Fusion 360 model I feel comfortable sharing, not perfect, but works great for me. Time for me to start contributing.
Made to fit the real E3d V6 hotend found here:http://a.co/hnA3NVu
Highly suggest PETG or Nylon, I printed mine in PETG and it’s rock solid and has not loosened in over 20hrs of printing.
Material – PETG or Nylon
Support – No
Infill – 100%
You will need to flip it 180º on the build plate as it’s upside down and don’t know how to correct it after the model has been drawn. 🙂
Feel free to leave constructive feedback.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.1 Infill:
100 -
2С1 Gvozdika 3D Print Model
Summary
The first model for games in the scale of 1-200
All other models will be exclusively in this scale -
Glass clip monoprice 3D Print Model
Summary
remix shorten the distance between the clips holding the glass and heating bed.
also the heating bed and gantry -
DV Mega Case for Raspberrypi Zero W 3D Print Model
Summary
I have a Raspberrypi Zero W running MMDVM through a DVMega and printed a case that I thought I would share.
It’s a bit tricky to print and it’s fiddly to connect the DVMega through the case to the raspberrypi, but once together it works great.
The bottom half is this
https://www.thingiverse.com/thing:1160140
I hope it works for you but it is a bit tricky as the shape is complex.
73’s -
greebele pack 4 Free 3D Model
Hi,again! Here is new set of greebles, 40 new designs. So you have more fun to making your own combinations of this set. And you can edit,cut,paste-what ever you want to do.
Have fun. -
Airsoft Dummy Knife/Bayonet 3D Print Model
Summary
This is my first ever attempt at making a custom design. I am self taught with the program so some dimensions may be off (like i said first ever design)
THIS IS NOT A REAL KNIFE AND IS NOT DESIGNED TO BE ONE ITS MADE TO BE USED AS A MELEE WEAPON IN AIRSOFT GAMES
But here are some things you will need:
A 3D printer (Duh)
Hot glue or super glue
sand paper or a metal file
a small metal pick or knife -
Snowflake Keychain 3D Print Model
Summary
Simple snowflake keychain as part of my “things to print for people for Christmas” exercise. Enjoy.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Infill:
30% -
Snowman! 3D Print Model
Summary
Here is a simple snowman model designed to be illuminated with a tea light.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Yes Supports:
Yes Infill:
20% Notes:
I’ve printed 18 of these with clear PLA. Sliced with Cura, the central support is easy to remove.
How I Designed This
Designed with MS 3D Builder -
Secret compartment hollow screw trick puzzle 3D Print Model
Summary
Top screw is links threaded which makes it counter intuitive as intended. Walls are 2mm. Threads are M12x1.75
Original is made by robrook https://www.thingiverse.com/thing:330688 but there were some problems with scaling in the slicer, and some minor problems with the secret screw threads showing when screwed in.
I also included an exported step-file from fusion 360
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
0.1 Infill:
60% Notes:
I printed with PLA, heated bed and 8mm brim. No support was needed. It is rescaleable but below 50% makes it brittle. -
Geared Light Switch Single Plate 3D Print Model
Summary
I made the original three switch design for my son who loves gears. It’s worked fine for the past 3 months so I made a single light switch plate for my basement light switch.
I printed the whole thing out in 14 hours at one time in gray PLA. I used 20% infill which worked but didn’t have the best surface finish. (the all gray picture above) In later runs I used 40% and that worked much better.
I didn’t like the prison look for the light switch so I remade the gear and pinion using orange PET-G.
I noticed that the gears run smoother with the orange PET-G. So that’s interesting. . . .
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
Yes Supports:
Yes Resolution:
output as “fine” from onshape Infill:
40 % Notes:
The small gear and crank do not need to be glued together but I did anyway.
The crank and gear are held onto the light switch plate by an m3 screw. I sized the hole in the post so that it does not need to be drilled out. It does need to be tapped with an m3 tap.
Post-Printing
Tap that hole
After you print this out and remove the supports. The post on the light switch plate needs to be threaded with an m3 tap.
The Pinion has to be in the groove before you put it on the wall. The holes in the bottom of the pinions are so you can sneak the bottom screw into the light switch.
If it gets jammed you might not have tightened down the screw enough. -
Machine 3D Model
Additional Info: Machine Master forging machine 1 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Dva Orimant ver 2 in 3D Print Model
Summary
It is an orimant that is 2 inches tall -
Base for the Moby iPhone Dock 3D Print Model
Summary
This is a Tiny-Remix. Just added a base to conceal the cable and give it more room. -
Anet A8 Fan Hinge V2 3D Print Model
Summary
A remix of a Mod for easily accessing the extruder gear.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
0.3mm Infill:
100% Notes:
Print with fan plate facing down and arm getting vertical supports. (Same as shown in the Cura screenshot.)
Post-Printing
Post-Printing
Remove the support material holding the hinge arm and inside the screw hole. Get a long M4 screw (not sure how long mine is, whatever screw you use in your existing fan hinge configuration should work). Remove the top left screw holding onto the top left linear bearing and install the mod there. Optionally, remove the screw under the top left-most screw for a smoother hinge.
How I Designed This
Design
I simply took bartoaster’s awesome Anet A8 fan hinge (https://www.thingiverse.com/thing:2380825) and beefed it up in 123D Design. I then cleaned it up in Blender. -
Futuristic HUD Free 3D Model
I made this futuristic HUD to a DVD menu. But then I changed my mind.
a small animation is already on it. To render you have to select only memory location and format. much fun! -
Modern table Free 3D Model
Modern table modeled using modifiers. Add node value tied to cast shadow amount through the glass top.
This is actually a 2.79 file to avoid server glitch -
Drone design study Free 3D Model
One study about a drone design than could totally be fold in one shell on a go.
-
Bottle Advert shooting rig Free 3D Model
Built a studio lighting rig to get decent cosmetic bottle Advert images.
This is actually a 2.79 file to avoid server glitch -
@utumn 2017 – Textures Vol – VI (Vinka Plant Leaves) Free 3D Model
24 Textures (350px each) with 2 type of Bump Map and Alpha Map of each texture. 4 images per Texture = 96 images. Ready to use cycles.
-
Lucille (The Walking Dead) Free 3D Model
A high-poly model of Negans bat Lucille, complete with blood. All textures are from cgtextures.com
-
Lampshade Free 3D Model
Just tried out volumetric rendering.
This is actually a 2.79 file to avoid server glitch. -
Shiny Procedural Leather Free 3D Model
My experiment with nodes shows that even Suzanne looks sexy in leather 🙂 Material should be good for shoes, boots and any other stuff that is made from impregnated, shiny leather. Gloss is a bit exaggerated, but i wanted to show it better in a preview.
-
CGC Classic: Teddy Bear Free 3D Model
In the two part video tutorial that this file is the source for, learn how to model and texture a cute teddy bear!
-
Hardwick Stove Knob 3D Print Model
Summary
Our aging Hardwick stove has lost most of its knobs. Printing these out will get us a bit more life out of it before we finally give in and buy a new stove. -
Star Wars Kyle Katarn Lightsaber 3D Print Model
Summary
This is a replica of Jedi Battlemaster Kyle Katarn’s third lightsaber. I claim no rights to this model seeing as I was able to take it directly from Star Wars Jedi Knight: Jedi Academy. I did though size and make sure that the saber could print on a Monoprice select mini v2. This means that those of us with the entry printers can print this thing easily. Just use some super glue to attach and spray paint to desired finish. Enjoy.
— Walrusking
Print Settings
Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
10 Notes:
This was printed with a Monoprice Select Mini V2
Post-Printing
Spray Paint to desired finish -
Prusa Multimaterial upgrade heatsink PTFE cutting jig – 41mm 3D Print Model
Summary
A very simple jig to enable precisely 41mm of 4mm OD PTFE tubing to be cut to insert into the top of the MMU heatsink. Insert tubing all the way into the hole and cut parallel and flush with the wall at the entrance point.
Please note that this is not the only step required with this tubing. It must also be reamed and chamfered (official specs here). Also note that the inside diameter of this tubing is specified as 1.85-1.9mm, which is not the same as you will find on generic PTFE tubing.
Print Settings
Printer:
Original Prusa I3 MK2 MMU Rafts:
Yes Supports:
No Resolution:
0.2mm Infill:
Doesn’t matter Notes:
Use a small brim and print vertically. I printed this with 4 perimeters. Insert tubing all the way to the end of the jig and wse a razor or utility knife blade and cut flush with vertical surface at entry point. -
Sofa 3D Model
Additional Info: Sofa DODGE N241017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Microwave 3D Model
Additional Info: Microwave Gorenje MO 20 MGW N281017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
