Summary
Meant to be worn by the Crown Prince.
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Sink 3D Model
Additional Info: Sink faucet Wayfair N191117 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
cierre caja taladro würth 3D Print Model
Summary
Es el cierre de la caja de un taladro de la marca Würth, esta impreso en PLA
Print Settings
Printer:
anet e10 Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
17 -
Stand for metaform3d’s Starfury 3D Print Model
Summary
I made a quick stand for metaform3d’s amazing Starfury model. Once you attach the fins the only way to put it on a flat surface is on its nose, and I didn’t have any martini glasses handy.
I know it doesn’t attach the same way the cobra launch gantry would, but I wanted something a little more stylized. -
Heat Tower Test 3D Print Model
Summary
Temperature test to find the best temperature for your filament.
Have made a thin wall that you can break down to find the best welded team
So, if you do not get up the thin wall, you have to go in and set it to print thin walls
Simplify 3D: FFF Setup- Advanced-External Thin Wall Types = Allow single extrusion walls
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0,1000
How I Designed This
fusion 360 -
The Walking Dead – Abandoned Bus and Police Car 3D Print Model
Summary
Some additional vehicles to litter your road ways.
I added an additional removable-roof version of the bus so you can hide zombies, loot or your heroes in it. There are some bus seats too to scale and print ! -
Cemetery Free 3D Model
A cemetery where it is the place to start the game. where the graves are tombs and trees. and there is a grave wall.
-
Galgadon The Adventurer Free 3D Model
A human adventurer 3D model,that’s wield a broadsword like a hero.
-
SMOKE SIMULATION Free 3D Model
My very first simulation using smoke, some improvements could be made but this is it so far, enjoy 🙂
-
SMOKING LOWPOLY CAULDRON Free 3D Model
A little lowpoly smoking cauldron I put together quickly 🙂 Enjoy
-
MAN & HARLEY A.R Free 3D Model
here are two male character blender files and a motorcycle harley using cycles rendering, for male characters the basic object using cube, hair using particles and for bone making using rigify add-ons for motorcycle harley all components are made separately to facilitate the workmanship and detail comments and criticism will be greatly appreciated.
-
Boras the blue cave monster Free 3D Model
A monster that’s lurking in a fantasy world that attack anything it see’s with it’s 2 horn
-
Simple Golem Free 3D Model
The Golem’s Body i made from Plane and The other parts i made from randomize an Ico Sphere .
This Golem has 3 Animation : Walk , Attack and Idle. -
Stickman RHG Complete Rigged Free 3D Model
[youtube]https://www.youtube.com/watch?v=JaHIj0eafiQ&lc=z23sdtsq2sviuphhl04t1aokghprwwjturztkrmwbpxlbk0h00410[/youtube]
This is a complete rigged stickman. The blend file contains a walkcycle along with the rigged character. This is gonna be my first upload here on blendswap. The rig has IK/FK on both the hands and the legs.
I searched for 3d stickman rig but couldn’t find one with a cool body proportion so ended up making my own and sharing it with you guys. If you guys are familiar with Hyuns dojo or stickpage, the stickman I made is pretty similar to the stickman you see in their videos.
You don’t have to give me credits or anything to use my rig but If you like my rig please subscribe my channel as a token of gratitude. -
Robot High Poly Free 3D Model
This Robot can walk with animatition walk-action and Inside there is a bone structure for the movement as you like.
-
12 Chinese Zodiac Animal Paper Clips (Part 1) 3D Print Model
Summary
I have completed six of them. I found it hard to depict an animal shape with simple lines. Here they are. What do you think?
Pig
Rat
Monkey
Ox
Rabbit
Dog -
Santa ItNyang 3D Print Model
Summary
These days, I create the series of my own character, names “ItNyang”.
I hope this character becomes it! Like “It Girl”.
Nyang is usually used on cat.
ItNyang’s pronounciation is similar with Korean word “있냐”, meaning “Does it exist”
Specially, I create the christmas edition of ItNyang. The Santa ItNyang, sound like “Does Santa exist?” in Korean.
Enjoy the Christmas
Ho Ho Ho..
Print Settings
Printer:
CREATABLE D3 Rafts:
Yes Supports:
No Resolution:
0.5 Infill:
3% Notes:
Using 0.8mm Nozzle makes your printing more fast and big 🙂
How I Designed ThisBefore Sculpt
After Sculpt
-
Single Unit Raspberry Pi case 3D Print Model
Summary
Iv built a single unit to house the raspberry pi and power adapter and cables, nice neat setup. -
MALU Board Game 3D Print Model
Summary
MALU is an abstract strategy board game for 2 or 4 players. The objective of the game is to move both your pawns across the map to the other side of the board and exit the map. The first player to have both their pawns exit the map wins.
The mechanics of the game are simple enough that anyone can pick up and start playing, but the depth of skill and many possible strategies to employ, allows for seasoned players to truly be masters of MALU.
Each turn, a player must move their pawn and place a neutral tile onto the board. As you place your tiles, adjoining tiles create paths that your pawns can move along. As your pawn moves, you have the ability to pick up those tiles and reroute them to your advantage… either as a path to the other side or as a means to block your opponents. But be careful… if you get too close, your opponent can snatch those tiles away from you and use them for themselves! You can also place walls of ice and mountain peaks as obstacles or knock down walls for strategic advantages.
I have remixed 2 of dutchmogul’s vikings into the player pawn for this game -
Mobile soldering iron STC T12 case 3D Print Model
Summary
I wanted a soldering iron to be used on the field, so battery powered but still with controlled temperature and under 20USD and so bought the STC T12 DIY kit which looks to be ok for the job.
After a bit of searching I couldn’t find a case for it that suited my intended use and I went ahead and made one that I think is reasonable ergonomic.
I’ve used an XT60 connector for the battery powering the iron but you can use other connectors type if they fit the socket and hot glue them in place.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.1-0.2 mm
Post-Printing
For the battery connector socket I’ve premade supports in the form of a 0.8mm wall that needs to be removed after printing. -
WLANThermo Mini V2.5 Case – Variant Crow 3D Print Model
Summary
Der beliebte Mini Gehäuse von Crow Design in der Version 2.5 zum selber drucken.
Das Gehäuse oder Einschweißmuttern können hier bestellt werden:https://www.wlanthermo-shop.de/
Further Information:https://www.wlanthermo-shop.de/https://crow.n-metal.de/https://www.grillsportverein.de/forum/threads/wlanthermo-mini-3d-druck-gehaeuse-fuehleraufnahme-variante-crow.262108/ -
Prusa I3 Mk2/S Filament guide and light holder 3D Print Model
Summary
I have been running into problems with new rolls where the filament would spring of and get tangled. I was going to print one of the many filament guides available, but decided to make this. I use a Yorkville music stand light to light up the build plate when printing. Its pretty bright for its size, and you can power it off a spare usb port on the raspberry pi (assuming you use one for octoprint, but any usb port will work). I use the light both for checking in remotely and for the time lapses I create with octoprint. I initially had the light clipped to the frame of the printer but wanted to bring the light arms more forward to take care of some shadows. the holes in the side allow tie wraps to keep the power cord out of the way.
The light I use can be found here: https://www.long-mcquade.com/12870/Band/Metronomes_Tuners_Stands/Yorkville_Sound/Dual_Music_Stand_Lite.htm -
Super Famicom Cartridge (Super Nintendo PAL cartridge) 3D Print Model
Summary
Just a redraw of a Super Nintendo cartridge (PAL version) to print some keychains
How I Designed This
It’s a remake of https://www.thingiverse.com/thing:1396153 -
training low poly shoe Free 3D Model
Training low poly shoe. This is my first blender product. Please enjoy it :).
-
TINTIN_Returning to Earth Free 3D Model
Tintin’s rocket after leaving the moon and on its way back to Earth.
Complete with background image, nodes and materials.
Blender Cycles
Blender 2.79 -
IPhone 5s Free 3D Model
Here another project i have done a year ago, just improved the model and the material. So this high poly model with 116159 verts, 104670 faces and 209340 tris. This model can be downloaded and used for any project. As for the Hdr image, it has been removed due to Licensing but can be downloaded on HDRIHAVEN. Hope you like it guys and as usual feedback are welcome
-
Traditional Swing-Arm Floor Lamp Free 3D Model
Everything in this file is Blender-made, except the lampshade, which I created in ZBrush (but applied materials in Blender). The shade, bulb, harp and finial are all parented to the swing arm, so you can adjust the whole upper part by changing the Z rotation value of the swing arm. The electric cord is left as a curve for easy adjustment to your scene. All parts are properly named and the lamp is grouped and parented to an empty, ready for linking or appending.
-
chain-chomp Free 3D Model
this is a mechanical verse of a chain chomp that I made! you can use this for animations or for video games!
-
![TARAKO KEWPIE [cod roe dolls] Free 3D Model](https://3dhunt.co/static/2017/12/00c74abfbcee619e918d6459084819cf.jpeg)
TARAKO KEWPIE [cod roe dolls] Free 3D Model
Just uploaded an adaptive subsurf tryout, Though gave up multiple alley as far as the horizon due to memory full. Don’t forget to press play on timeline, creepy&hilarious as hell. Enjoy!
-
little girls sandals (EU23) Free 3D Model
Hi,
oh man what a creat project^^
This shoes i have great free from fantasy and with basic materials. In the most projects from me i use only C00 textures in this too. Spezialy for this project i have great the most textures in this blendfile. So funny the stitches i have rendert with the freestylelines in blender to a texture. The size of the shape is based of a DAZ3D childfeet the makehuman feets are not so good (for me). -
Lighbulb Free 3D Model
Photorealistic subdivisional model of a light bulb. PBR materials are properly set in 3Ds Max 2018 Arnold renderer and Blender 2.79. HDRI background is included and scene is render ready.Clean quads only mesh that can be further subdivided using Turbosmooth. Base screw section has non-overlapping UVs.No ngons, tris, overlapping faces or isolated vertices.
-
Pi Zero Dual Relay board Enclosure 3D Print Model
Summary
A dual channel relay enclosure for a wi-fi garage door opener.
It works with just about any model / make of garage door opener.
Note: The photos of the item “in use” are of a draft version (print settings below applied) where the lid wasn’t perfect, but I decided it was ‘good enough’. I have updated the design you see here to fix the fit and finish issues.
I started out with this instructable, detailing a rather old hardware setup using a dual channel relay board.
I didn’t much care for the PHP / Apache on Raspbian stack. I know other folks who have used this setup and had issues with SD card corruption.
So I ended up creating my own app in go to do the HTTP bits and handle the GPIO interaction.
Then I took it a step further and baked up a minimal Yocto Linux image with a read-only rootfs, to guard against the SD card corruption issue.
If you want to customize the linux image, you can read the docs in my bitbake layer.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% Notes:
Layer Height: 0.2
First Layer Height: 0.2
Vertical shell perimeters: 2
Horizontal Shells:
Top: 3
Bottom: 3
Brim: 4mm -
Pure Bottle 3D Print Model
Summary
Title : Pure Bottle
Designer : Stanley Mars
Date : 2017/12/14
Software : Solidworks 2016
Tip
If you applied and like my design please just feel free donate to me. Appreciate !!!
Have any issue or any idea just free free email me. I will glad to solve your any question. 😉
EMAIL : [email protected]
Sincerely.
Donate Address
BTC(Bitcoin) : 34rkrNccR2Yob24yTahkxcEq6fLGmmuyvB
ETH(Ethereum) : 0x194dd6281ec979281155c83fe5d0586e3e380b6a
LTC(Lite Coin) : Lg6noExxFLyzHF68t1AFeZpdkRYMkNvyPR
XMR : 43q1S7LnMvwixdrAM74EidasrC5v14XkfAHJjYwDjBmsXHNhAgbgrftiQub3kTqcinFWgw9fbgMRHdfSH1Bf9GncC6c2iEY -
Fan duct & Auto Level sensor support 3D Print Model
Summary
Fan duct & Autoleveling sensor support for Geeetech I3 Pro B.
Note: print supports needed for Fan Duct only. -
Keyport Slide USB 3D Print Model
Summary
I wanted a detachable USB Drive for my Keyport Slide.
Pause mid print to add the USB chip.
Tape/Glue it to the bottom.
I put masking tape on the top side to help it print on top and protect the USB chip.
Included file with no overhang so you can just tape/glue the USB chip without having to pause print. -
Tree 3D Model
Additional Info: Tree Aesculus Grand N151117 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Mk.10 Extruder Silicone Cover Mould 3D Print Model
Summary
This is a mould for a high temperature silicone insulator for the MK10 heater block as fitted to the Wanhao i3 Plus and other printers. Gives a 3mm insulating shell around the outside of the block with ports for the cartridge and thermistor wiring.
Post-Printing
Parts required
You’ll need 4xM4 screws and nuts to bolt the two halves of the mould together. The flanges are 3mm thick so M4x10 should just about do it.
To mould you’ll need to fill half the mould with your silicone – if you can’t get a runny 2 part mix then try to pipe it into the corners. Push the insert in and make sure the silicone is flush with the top. The cross on top should allow the cover to be removed over the insert once cured. -
j2 Prime case 3D Print Model
Summary
i couldnt find a j2 prime in the net so this is my contribution to the everyone 🙂
printed and tested using PLA -
Really basic Titan Aero Bltouch+fan mount 3D Print Model
Summary
Real basic thing I thought someone could use, I got tired of the bltouch adjustable mounts I found on here breaking, so I made a much beefier one. Could use some tuning but it works for the job I made it for. -
THUGBUSTER 3D Print Model
Summary
A little self defense ring that if printed with metal filament might actually be usable and viable. enjoy!
I am NOT responsible for any damage to persons or proper resulting from any use of this ring or any modification of it!
Print Settings
Rafts:
Yes Supports:
Doesn’t Matter Infill:
100% Notes:
The ring can be resized in any software. As of now the inner diameter is 80% of an inch. -
Tubes_Dian Suci A_6706164048 Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course
-
Wabbajack 3D Print Model
Summary
cheese for everyone! wait. scratch that. cheese for no one.
50% of the vertices and triangles have been reduced but it is still massive the stl’s are split into 7 pieces and still may not fit on the print bed
caution: untested and not scaled to standard bed sizes.
again sorry for the stupid amount of polys
universal reference sheet: http://sta.sh/05gdjzyi2cs -
17 Ah 18650 Battery Pack ( 3S5P ) 3D Print Model
Summary
This a enclosure for 15 18650 cells to make a Battery Pack. I used 3400 mAh cells to make the 17Ah -11.1 V Battery Pack.You can see the full project on my Instructables.https://www.instructables.com/id/DIY-Professional-18650-Battery-Pack/
Print Settings
Printer:
Creality CR_10 Rafts:
No Supports:
No Resolution:
0.3 Infill:
100 Notes:
Print Speed : 70 mm/s
Fill Density : 100%
Extruder Temperature : 205 degC
Bed Temp : 65 degC -
TJBot – A DIY Robot powered by IBM Watson Cognitive Services 3D Print Model
Summary
This thing contains files to 3D TJBot – a do-it-yourself, open-source kit to learn, experiment with and explore AI using IBM Watson services. Once built, you can add a list of components ( raspberry pi, RGB LED, a microphone, speaker, a servo motor, and a camera) and then run sample code that allows the robot listen, speak, translate text, lookup the weather, wave its arm etc using various IBM Watson AI services.
Printing
Please print the right and left leg with supports. All other parts can be printed as is.
Want to Learn More?
View a step by step instructable on how to 3D print TJBot on Instructables.
Visit the TJBot website to learn more about the project. Hint: You can also make TJBot from laser cut cardboard.
Visit the TJBot [Github Repo].(https://github.com/ibmtjbot/tjbot) to learn more about how you can program TJBot.
Enjoy!
Post-PrintingGot all your parts printed? Here is how to assemble it all.
-
Frame for Polar M600 Watch Strap Buckle 3D Print Model
Summary
I lost the metal buckle frame for my Polar M600. Luckily the pin and the prongs didn’t fall off. Couldn’t find just the frame anywhere for purchase, so designed and printed one for myself.
I’m fairly new to 3D printing (less than 1 week), and this is the first 3D thing I’ve ever designed. Only had white PLA with me so used that, but ideally would look nicer with silver metal PLA.
Print Settings
Printer:
MP Select Mini v2 Rafts:
No Supports:
No Resolution:
Layer height: 0.1, Shell thickness: 0.8 Infill:
100 -
Humpback Whale, attempt #1 3D Print Model
Summary
Sculpted in Oculus Medium. Done from memory without a reference photo, so the proportions are likely off.
I suspect that to print it well, you’d need to slice it in half head/tail, and print with the flat cut faces down. Should scale well to the limits of your printer. -
Armchair 3D Model
Additional Info: Armchair 3 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Tree 3D Model
Additional Info: Tree oak N231017 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Christhmas Decorations 3D Print Model
Summary
Hello it’s HanJo 3D !
Watch my video !https://youtu.be/MaxwzAk_AKs
I Hope you like it ! Good Print !
Follow me on :
YouTube : https://www.youtube.com/channel/UCYe8uTTnR_Pe3uIemazNO5w
Facebook : https://www.facebook.com/hanjo.hanjo.125
Twitter : https://twitter.com/HanJo_3D
Instagram : https://www.instagram.com/hanjo3d/
Thingiverse : https://www.thingiverse.com/HanJoTv/about
Cults 3D : https://cults3d.com/fr/utilisateurs/HanJo_3D/cr%C3%A9ations
How I Designed This -
45mm soviet anti tank gun 3D Print Model
Summary
Mined from 3d warehouse and repaired with makeprintablehttps://3dwarehouse.sketchup.com/model/b7b16563-af5a-4fd4-8be2-9a23efbf456d/ANTI-TANK-GUN-45-MM-TYPE-M42-RED-ARMY-WW2-MAIN-DEFENCE-LINE-ANTI-TANK-SOVIET-ANTI-TANK-WW2
Scale 1:56
Test print required 🙂 -
Snowman Bank (Not Tested Yet) 3D Print Model
Summary
I made this Christmas themed piggybank hope you like it. I’ll be making more of these. -
Zootopia car Free 3D Model
Simple car model. Made for my fun) Sorry for my issues and bugs, i newbie. In pack: map and car. Make for subdiv.
-
Water Gun Free 3D Model
Water Gun, made from shape if you want to use its free. But if you want use to commecial call me.
-
CUBE SCI-FI Free 3D Model
Cube SCI-FI, create by following the tutorial from mantissa https://cloud.blender.org/p/motion-graphics/
-
Vaso para bebidas (Beverage plastic cup) Free 3D Model
Beverage plastic cup made in Blender 2.79 (cycles) by: Juan Viana DiseÃÂño 3D
Vaso de bebida hecho en Blender 2.79 (cycles) por: Juan Viana DiseÃÂño 3D -
Tubes PDV Medieval Ikbal Toriq 6706164084 D3IF 40-04 Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course
-
Hero Tugas Besar Free 3D Model
“This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course”
-
HERO TUGAS BESAR 3DVISUAL Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course
-
Boss Villain Fantasy Character Free 3D Model
Boss / Enemy Fantasy Character, nice character for your enemy in fantasy game genre
-
MEDIEVAL VILLAGE AND CASTLE MAP Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course
-
![Robot Aku [Tugas Besar PDV] Free 3D Model](https://3dhunt.co/static/2017/12/366132a6e242c4a72cd168b550ffe393.jpeg)
Robot Aku [Tugas Besar PDV] Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course
-
Geodesic Force Field Free 3D Model
A simple force-field concept I created using Animation Nodes 2.0.
-
Social Munzee tag 3D Print Model
Summary
munzee tag for social munzee. Part made in imperial measurements. -
Laser cut living hinge box 3D Print Model
Summary
Introduction
I remixed this design to extend the lip of the lid to give you something to grab onto.
For now, I’m just using a rubber band for closure.
Materials
1/8″ plywood (I used Baltic birch)
Special instructions
Try to cut the hinge in the direction of the grain, so it’s easier to bend.
Use a damp (not dripping) paper towel to wet the hinge area. This will allow the hinge to bend without breaking. Use a rubber band to hold the hinge closed while damp to allow the wood to retain this position.
Glue and assemble, then clamp as needed.
Location and device
Cut at HackPGH on a WKLaser LC6090. -
cnc2417 Z axis 55mm spindle mount holder 3D Print Model
Summary
55mm Spindle mount for chinese CNC “cnc2417” 24 x 17cm . This router mount 35mm spindle as default and not compatible with more diameter.
Assembly requires:
2 x bolts M3 >18mm
2 x nuts M3
4 x screws M3 16mm
No material support needed
Print Settings
Printer:
HyperCube 3D Printer Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2mm Infill:
100% Notes:
https://www.thingiverse.com/thing:1752766
How I Designed This
Designspark Mechanical Downloads:
De: https://www.rs-online.com/designspark/mechanical-software-de
En: https://www.rs-online.com/designspark/mechanical-softwareBuy
Cnc router CNC2417
https://www.aliexpress.com/item/cnc-2417-diy-cnc-engraving-machine-3axis-mini-Pcb-Pvc-Milling-Machine-Metal-Wood-Carving-machine/32799560097.html?spm=a2g0s.9042311.0.0.eAyshb -
One Piece Heart Neclace 3D Print Model
Summary
Prints in one piece. Requires 200×200 build plate minimum. Printed with 0 infill at .2mm level height. -
torre ET ITC 3D Print Model
Summary
modelo de la torre de la escuela tecnologica instituto tecnico central en bogota Colombia
