Summary
A remix of Thingiverse part 2565427 but for 3030 aluminum extrusion.
Added bracing and additional mounting holes for M6 bolts.
Print Settings
Printer:
Doesn’t matter Rafts:
No Supports:
No Resolution:
whatever cranks your handle (I used .16) Infill:
again, whatever floats your boat (I used 20%)
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
3030 bowden motor mount 3D Print Model
-
Set 3D Model
Additional Info: Set glass dish – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Arduino 8-bit synth case 3D Print Model
Summary
This case was designed after reading a new magazine called Hackspace. In this issue a man named Chris Ball shows how to turn an Arduino uno in to a 8-bit synth.
i like the uno basics kits you can get off Ebay and the Adafruit perma-proto, so i desgined this kit to house those.
holes for the pots and push button are included in design but have not put holes for audio jack and CH340 USB which will vary depending on what one you have.
You will need:
Adafruit perma-proto 1/2 size
CH340G USB TTL Serial Adapter Ebay 162766671421
Arduino Uno FULL kit UK – Ebay 162597203220
4x 10k linear potentiometers
470r resistor
100uF electrolytic capacitor
push button (12mm)
audio jack
Print Settings
Printer:
TronXY P802MA Rafts:
No Supports:
No Resolution:
any Infill:
15-20% -
Lamp Shade / Abat Jour 3D Print Model
Summary
https://www.youtube.com/watch?v=TaMHD__nSLk&feature=youtu.be&t=416 -
40K chainsword V2 3D Print Model
Summary
I have make some update on 40K chainsword V1 cosplay whit up the size of the chainsword and design so up can make chainsword bigger by add chainsword_3_v2.stl file. -
X-UAV Talon front skid 3D Print Model
Summary
This front skid plate is intended to be installed on X-UAV Talon 1.7m with no front wheel. This will protect front part of the fuselage on landings. The front skid plate has an impact absorbing segment that is meant to absorb pressure on hard landings. To print, rotate the object then print on its side lying on the print bed. You may use ABS or PLA. To install, just apply foam safe glue on the surfaces to be bonded.
Print Settings
Printer:
ANet AM8 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2-0.4 Infill:
20-30% -
Sunflower Track Light ( see video for details ) 3D Print Model
Summary
This is a lighting fixture that I recently made. The YouTube video showing the entire build https://youtu.be/6Kby5ZsPQHo . You could easily just make single fixtures using the parts. It was a fun project using many different materials. The printed parts fit standard light fixture hardware and only use LED bulbs so the shade does not melt. I used green and yellow Hatchbox PLA. -
Medieval Castle on the Hills Free 3D Model
TITLE : Medieval Castle on the Hills
“This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course” -
TMCoE – Cartoo fire Free 3D Model
Here is the model of the fire used for my project “The Tiny Mastercook of Evil”.
-
CGC Classic: 2D Snowflake Pattern Free 3D Model
In this tutorial by Kernon Dillon, learn how to create and render out a 2D Snowflake pattern using Blender.
-
Multi-drawer Components Cabinet 3D Print Model
Summary
Multi Drawer Components Cabinet
I designed this because I wanted a components cabinet (similar to those made by manufacturers such as Raaco and Akro-Mils) to store small parts (originally to organise all of my resistors to make it easier to find the one I wanted). There wasn’t anything on Thingiverse that completely met my needs, so I drew this up
I have deliberately made the walls of the cabinet carcase quite thin (1mm) as I found that some things on Thingiverse appear to be over engineered in this regard. The lip at the top-front of each drawer slot is to prevent the drawer being accidentally pulled completely out (raise each drawer at an angle to insert / remove). I rejected other retention methods – spring-clip, detents etc as they would complicate a simple design and require thicker walls. The cut-outs in the walls reduce the amount of material used and improve the aesthetic, especially with different coloured drawers.
The drawers are made with thin walls (0.5mm) and turn out to be quite flexible and tough. You can set minimum perimeters = 2, if you want more rigid drawers. The corners are radiused to make it easier to remove small parts (I hate it when a 3mm nut gets stuck in the corner and I have to resort to tweezers to get it out.). The drawers have a finger slot instead of any protruding handle – partly to give a clean aesthetic but mostly to avoid having to use any printing supports.
I’ve Printed the cabinet carcase in PETG and PLA (at 0.35mm layer height) after having massive fails with ABS (shrinkage, warping and stress cracking). Be warned! the largest size (5 x 6) that fits on my print bed takes a looooong time to print!! Approximately 25hrs (I’m still printing it as I post this). I’ve printed the drawers in PLA and ABS, PETG having failed at the radiused corner.
I haven’t put any feet on the cabinet (I use stick on rubber feet) so they can be epoxied together to form larger sizes if desired.
I drew this in SketchUp and have included the files for those who want to customise or change the design. The design is modular – copy however many of each type of drawer that you want, align them (precisely), group them and export to STL. The “Prototype with Hex Perfs.stl” drawings have a pretty hexagonal perforation infill to the openings but were not structurally sound, and were removed from the final design.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.35mm – Carcase, 0.2mm – Drawers Notes:
Printer – Prusa i3 MK2S
Print Settings – Cabinet Carcase – PLA and PETG (I think ABS would need a heated enclosure)
0.35mm layer height, no supports, 100% infill, minimum perimeters = 1.
Print Settings – Drawers – PLA, ABS
0.2mm layer height, no supports, minimum perimeters = 1, Extra perimeters if needed = True, Ensure vertical shell thickness = True, Avoid Crossing Perimeters = True, Detect thin walls = True -
Monoprice Mini Delta Glass Clips 3D Print Model
Summary
These will hold a 120mm glass plate on the bed of your monoprice mini delta quite securely. You also get some nifty shields that prevent debris from falling into the bottom of your printer. This is a remix of 2 good designs on Thingiverse and I think they are better combined than separate. The reason is that this design doesn’t allow the clips to spin, which with previous glass clips on Thingiverse could allow the bed to get free mid-print. These are designed to hug the stock clips tightly, so they become a second point of contact and add to rigidity. You’ll want to clip the shield end of this part higher up on the rails, and then slide it down, you’ll probably have to wiggle it back and forth a bit to get it over the stock clips.DEFINITELY CHECK: Each time you re-install your glass plate, make SURE you can still hear the tact switches under the bed click if you press your fingers on the three spots where it goes to auto-level. I’m not responsible for any damages caused by the use of this print.
Print Settings
Rafts:
No Supports:
Yes Notes:
Printed with PLA -
Cessna 172 Flight Simulator Panel – Flap Control 3D Print Model
Summary
Flap control with servo-actuated position indicator for a Cessna 172 flight simulator panel.
For more information, see the project details at https://github.com/allanglen/c172-flight-sim-panel.
For details about this part, see https://github.com/allanglen/c172-flight-sim-panel/tree/master/flap_control_panel. -
Swissknife : GoPro session mount 35degrees 3D Print Model
Summary
Gopro Mount for swissknife frame.
The bottom part can be attached with 2 zip ties to the top plate. -
Compressor 3D Model
Additional Info: Compressor platform N250316 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Vintage Northrop Aircraft Sign Litho 3D Print Model
Summary
Here’s just a great looking old Northrop logo. The STL file should print out real nice too. Bar none, the greatest and most unsung WWII plane was built by Northrop, the P-61 Black Widow. It’s my favorite prop plane. MAAM is building one of the I think only THREE P-61’s left on the planet, and theirs will be the only airworthy one. It has one hell of an interesting story behind it too, look it up! I can’t wait to see that bad boy in the air! -
WWII Era Pratt & Whitney Aircraft Engines Sign Litho 3D Print Model
Summary
Here’s the world famous Pratt & Whitney Dependable Engines logo. I think this file turned out fine, and it should print nicely. I’m going to make at least a couple of these myself. I would have to think that the P & W radial engines are in the top five list of machines that we couldn’t have won the war without. Right up there with the Willys and the DC-3. They’re power houses, they sound great, and they are still running to this very moment the whole world over. It doesn’t get much better than that!
This is the last one of these I’m posting for now. I have 21 (!) more that I made and they’ll get uploaded throughout the week. -
Christmas Bell – Voronoi Pattern 3D Print Model
Summary
My 2nd Voronoi christmas design.
https://www.instagram.com/p/Bc4RsixAvDA/?taken-by=tondanosek
fast christmas gift.
This one is special, because the ball is assembled to bell. 🙂
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
0% Notes:
Be sure that your bed preparation was done properly. Dont be affraid of big adhesion. This is important to get small ball on the right place.
For PLA
210/55 first layer
200/50 other layers (lower temp of nozzle because of stringing)
Retraction – 1.2 mm
Z lift – 0 mm
Perimeter speed – 30 mm/s
Non Printing moves – 200 mm/s
This settings will avoid stringing. -
TMCoE – Hourglass Free 3D Model
Here is the hourglass of my project “The Tiny Mastercook of Evil”.
-
Anubis Class Free 3D Model
This is a slightly more usual version of the USS Vengeance design. 6 torpedo launchers in the front, Excelsior-style non-dual phasers, mesh only.
-
Beardcraft Hero Free 3D Model
this is my mine, i make it by myself. this is a reflection of me also this is for an assessment in subject 3D Visual, this is a hero.
-
Zundapp KS 750 Free 3D Model
Hey o’ people, first post!
well this time i share you my recently model.
yep, its Zundapp KS 750. Quite historic motorcycle and one of my wishlist xD -
one more experiment with lamp Free 3D Model
Much more complex combination of line style and toon color animation. For better controll i use different render layers.
Render the animation took a while. If you like it faster, switch denoising on layer walze off -
Low Poly Cartoon Tree – Painted Free 3D Model
A quick little 45 minute doodle at the end of the night I figured I’d upload for people to use if they want. All textures were painted myself, feel free to use for your own variations if you like.
-
Tubes 3DV Bimo s Free 3D Model
This project is used an assesment requirement for digital modelling for 3d visualization course
-
Mega Man Free 3D Model
This is my very first model that IâÃÂÃÂve send to Blendswap, hope you all will enjoy this model that I have created.
-
Reusable Sploof V2 3D Print Model
Summary
Designed with tight tolerances. Please let me know if there are any problems with the scaling. -
Glock 43 Pistol Stand 3D Print Model
Summary
Glock 43 pistol stand with two magazine slots. I also added the Glock logo and number “43” so you know which pistol this stand belongs to.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 Infill:
20
How I Designed This
Fusion 360 -
Replacement Battery Cover for PS3 Remote Control 3D Print Model
Summary
A replacement battery cover for the Playstation 3 remote control.
Print Settings
Rafts:
No Supports:
Yes Resolution:
.15mm Layer height Infill:
20%
Post-Printing
Support material can be removed without too much trouble with needle nose pliers. -
Nissan Pathfinder / Xterra / Frontier hood prop rod clip 3D Print Model
Summary
Replacement hood prop rod clip
Fits:
Frontier 2005-2017
Pathfinder 2005-2012
Xterra 2005-2015
I printed mine with small supports under the little clip legs, and it printed fine.
Hope this helps! -
CR-10S Locking Bed Leveling Knob 3D Print Model
Summary
Inspired by orcusomega’s “Locking CR10/S4/S5 Bed Leveling Knob” (https://www.thingiverse.com/thing:2462249). This is a knob that you can insert an M4 lock nut into. The hole for the screw is not fully open. After printing there is a .4mm layer that you need to cut with a utility knife before use. No supports are necessary.
Quote from orcusomega’s notes:
“Requires a total of 8 M4 nylon locknuts. Remove the stock leveling wheels, and use one of the locknuts to keep the screw in place on the hot bed (being the nut all the way to the top,. making the screw stay in place without the need to hold the top with a screwdriver). Then replace the springs. Insert the remaining M4 locknuts into the wheels and thread them on – wala!” -
Dressing table 3D Model
Additional Info: Dressing table N211117 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Tree 3D Model
Additional Info: Tree poplar N151117 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Soporte radiador 3D Print Model
Summary
Esto es el primer diseño que subo, necesitaba en casa un soporte para un radiador, y eso es lo que es.
En PLA acaba doblandose.
Recomiendo imprimir en ABS, de momento en ABS me funciona bien. -
XL-RCM 10.0 PIXXY: Pocket drone / FPV quad Remix 3D Print Model
Summary
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA
Print Settings
Printer:
Deegreen Rafts:
No Supports:
No Resolution:
100 μm Infill:
30% Notes:
I chopped up the original model to print with no supports but some glue, a little sanding and patience are required. PLA -
Greek Top 3D Print Model
Summary
This is a top with Greek writing on it
Ανδρας=Man
Φωτιά=Fire
Νερό=Water
Γη=Earth
Ζώο=animal
Αέρας=Air
How I Designed This -
Christmas Tree DeathStarDestroyer 3D Print Model
Summary
I loved the “Ei9ht Star Wars Christmas Tree Star remix from Dantesgift” and, having printed one myself, wanted to make one for a friend. There were a few things I wanted to change though:
Some small parts were just too small to print, like the domes on the Imperial Star Destroyers
There were quite a few mesh errors, especially on the bottoms of the Interdictor Star Destroyers
I’m not a fan of the “Gladiator” Star Destroyers with the two points
I also wanted to learn TinkerCad (I usually use 123D) so decided to make my own version! I ended up with 3 variations, one with all Imperial Star Destroyers, one with all Interdictor Star Destroyers, and one with a mix of each.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.1-0.2 Infill:
10-20%
Post-Printing
Just glue the halves together with super/CA glue once printed.
How I Designed This
I sourced the Star Destroyers (this time using the Imperial II version which has a simpler bridge antenna) from dantesgift, and what looked like the original Death Star from kystopz89. Both Star Destroyers got some tweaks to simplify or adjust geometry that would be difficult to print at the intended scale, then they were brought together in TinkerCad.
There were a few mesh fixes to do after exporting to STL, the nasty ones handled by Microsoft’s online STL repairer and the rest using Meshmixer.
I hope you like them, and all credit to the designers of the models that went into this! -
TronXY X3A/X3 Fan Holder V5 3D Print Model
Summary
This is TronXY X3A/X3 Fan Holder V5.
For complete function you should to have fans 40x40x10 with 32mm connection size and 40x40x20 cyclone fan.
Part “TronXY_X3A_Fan_v5_Insert_SLOT” designed with support and it no need printing with support.
Part “TronXY_X3A_Fan_v5_Plate” can be or must be from aluminum or fiberglass (or some other thermoresistance) sheet with thickness 0.6–1.0 mm. -
Truck wheels Free 3D Model
Hello, this is a wheel model that makes for the purpose of printing has not been tested yet, and now there are more templates available to everyone.
-
Example Model 16 Free 3D Model
2 Stories House created with AIKINOS HouseBuilder by Lurtis Rules AIKINOS :- Creates the house structure of rooms and spaces.- Decorates the room interiors attending to their uses.- Assigns materials and textures to different elements.We can adapt AIKINOS to use your assets and problems. Test out Lite distribution on our website.Models from:01 – Sweet Home 3D contributors02 – Skopia03 – Kator Legaz04 – Blend Swap contributorsLicencesCreative Commons Attribution 3.0 licenseCreative Commons Public Domain (Zero)ArtLibre Licence
-
Transcendence High Speed AP Revolver (3D Print Kit Gun) 3D Print Model
Summary
Other Open Placehttps://grabcad.com/library/transcendence-high-speed-ap-revolver-3d-print-kit-gun-1
Please spread and disperse the 3D data of this gun if possible
Please upload it to another 3D print data site
Please cooperate with liberalization of 3D print gun -
Filament guide for Prusa Anet Geetech CTC printers 3D Print Model
Summary
This is my version of filament guide based on this one:https://www.thingiverse.com/thing:1240326
A larger pipe will keep more straight the filament at the end of the reel, when the loops are smaller.
Suitable for printers:
Prusa
Anet
Geetech
CTC printers
…and many models with a frame 5mm width.
Feel free to adapt the files to your needs.
Thank you so much for you comments, like, download and collecting!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0,2 Infill:
100% Notes:
For better results, use cooling fan. -
Gift tags 3D Print Model
Summary
I don’t have alot of designs uploaded but Will upload more. Put the name or word that you want for the tag in the comments and i’ll create the design. Please upload pictures of your printed tags.
Thank You,The Creator
-
Dungeon in a Tin Board Game 3D Print Model
Summary
Dungeon in a Tin is a solo or cooperative dungeon-hack. Players descend into a dungeon randomly laid-out from a stack of tiles, fighting through the orc and goblin hordes to rescue the kidnapped maiden and collect treasure and glory. -
Traxxas X-Maxx Pinion 3D Print Model
Summary
* not tested in RC Car **
im waiting for nylon filament, maybe i make in ABS one to try, but nylon is my favorite.
i think 100 infill is a good idea, it must be strong for the 8s xmaxx.
in the modell i use a modified slipper clutch from the 6s. I think so become the pinion not too much power on it.
Module 1
54 T
50 T
46 T
26 T Motor
Print Settings
Printer:
Anycubic I3 Mega Rafts:
No Supports:
No Resolution:
0,1 Infill:
100 -
Thin Wall Mount Nexus 7 2013 3D Print Model
Summary
I customized the model “Nexus 7 (2013) Qi Wall mount” by hawker180 to remove the Qi stand and make it thinner as I am planning on sourcing energy through the usb port and wanted something that will keep the tablet closer to the wall.
Print Settings
Printer Brand:
Printrbot Printer:
Printrbot Plus Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% -
Motor cover for Peon 230 3D Print Model
Summary
The Peon 230 quadcopter frame designed by Tech2C is super nice but there’s no motor cover included in the files.
I wanted a motor cover that didn’t need screws, that’s why I designed this super simple cover that just slide on the arm.
Please note that this cover is only compatible with the “Peon230_Arm_v1” and NOT with the “Peon230_Arm_v1_22sizeMotor”
Print Settings
Printer:
Anet A8 Rafts:
Yes Supports:
No Resolution:
0.2 mm Infill:
100% Notes:
The fit with the arm should be tight, otherwise the cover could fall off the quadcopter while flying.
Post-Printing
Just remove the stringing and sand the raft. -
Empire vase Free 3D Model
Empire vase, white marble, France (?), Reign of Napoleon Bonaparte (1804 – 1815). Musee du Cinquantenaire (Brussels, Belgium). Made with ReMake and ReCap Pro from AutoDesk.
-
Pixel 2 XL + Spigen Slim Armor Dock 3D Print Model
Summary
I made this for my Pixel 2 XL which lives in a Spigen Slim Armor, based on Screwyluie’s design for a Pixel XL stand (thus the unnecessary speaker ports). The Slim Armor needs a few mm all round, so the charging port sits about 2.25 mm forwards compared to the original. The insert is required to hold the charging cable in place – this is unchanged from Screwyluie’s original.
Print Settings
Printer:
Cocoon ModelMaker (Wanhao i3 Mini clone) Rafts:
No Supports:
No Resolution:
0.1mm Infill:
20% -
1:4 Wine Bottle 3D Print Model
Summary
A replica of a wine bottle made at 1/4 the original size. Full body solid. Could paint or cut a piece of cork to fit the top opening. -
Mini Plastic Christmas Tree Leg 3D Print Model
Summary
I made this for my Christmas tree. Because I lost the original legs.
The part that goes inside the tree is: 12.5mm x 40mm x 4mm
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
20% -
Drink Coaster 3D Print Model
Summary
Drink coaster made to match the Bunnings Matrix Halo screen panel. The surface is slightly concave to prevent cups from sliding off (self centering!), and there are holes in the bottom for some rubber feet for grip. Cutting out the supports to put the feet in is a little tedious, but the resulting coasters are sturdy as!
Print Settings
Printer:
Cocoon ModelMaker (Wanhao i3 Mini clone) Rafts:
No Supports:
Yes Resolution:
0.1mm -
Planting on wall 3D Print Model
Summary
Do you want to plant small flowers and water it automatically ?.
This is the base container I designed as first serious design towards greener homes. Use a solid wooden wedge strip to fix this container and make an array of it.
I have provided a watering draft in form of small 4mm tubular section followed by a through and through recess. This recess is kept slightly above the lower edge of pot so that it wan’t get choked due to soil. The 4mm circular section slightly extend below the recess and will act as anti splashing. Keep the flow rate of water very low.
Additionally, you have to go for an arduino and hygrometer along with a pump and motor for automatic watering. To make this fully autonomous and ecofriendly, you may operate the electronis/electric motor on Solar cell.
Let me know if you make one and contribute towards ‘Greener home’
Print Settings
Printer:
Ultimaker clone extended (in making) Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Infill:
60% min. Notes:
Use any water resistance polymer. No flexible polymer. No Nylon (nylon absorbs water) and becomes soft. -
Table Free 3D Model
table332 tris176 vertex2k textureslow polyunity textureunreal texturefile format:.OBJ , .FBX , .MB , .TİFF , .TGA , JPEGFİLE SİZE:129 MB
-
Curtain 3D Model
Additional Info: Curtain N221117 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Table Free 3D Model
table332 tris176 vertex2k textureslow polyunity textureunreal texturefile format:.OBJ , .FBX , .MB , .TİFF , .TGA , JPEGFİLE SİZE:129 MB
-
Electronic timer 02 EKF 15 EKF PROxima 3D Collection
Electronic timer 02 EKF 15 EKF PROxima 3d Models
-
Table Free 3D Model
table332 tris176 vertex2k textureslow polyunity textureunreal texturefile format:.OBJ , .FBX , .MB , .TİFF , .TGA , JPEGFİLE SİZE:129 MB
-
Tevo Tarantula Power Supply Enclosure 3D Print Model
Summary
Designed to enclose the standard PSU outputs and fit a power meter.
The walls are only ~2mm thick, which make them fragile. This is due to my concern of using less material as possible.
I’ve used XT90 for 2 outputs, it’s oversized but I already had them 🙂
There is an “XT90 Holder” that you can screw on top of them with an M4 screw, but I didn’t needed it.
Fusion 360 file attached, feel free to modify/use it !
Parts needed :
1 Power Socket W/Fuse & Switch :https://fr.aliexpress.com/item/Free-Shipping-power-socket/476915963.html
1 Power Meter :https://fr.aliexpress.com/item/AC-80-260V-LCD-Digital-100A-Volt-Watt-Power-Meter-Ammeter-Voltmeter-110V-220V-free-shipping/32617343719.html
1 meter Black & Red 13AWG:https://fr.aliexpress.com/item/1meter-Black-1meter-Red-Silicon-Wire-Heatproof-Soft-Silicone-Silica-Gel-Wire-Cable-12AWG-13AWG-14AWG/32797523458.html
1 IEC 320 C13 Female Plug :https://fr.aliexpress.com/item/New-Wholesale-Price-Black-IEC-320-C13-Female-Plug-Rewirable-Power-Connector-3pin-Socket-10A-250V/32808416783.html
2 XT 90 :https://www.aliexpress.com/item/5Pair-XT90-XT-90-Gold-Plated-Banana-Plugs-Male-and-Female-Antiskid-for-helicopter-Battery-esc/32460919234.html
2 Banana Plugs :https://fr.aliexpress.com/item/4Pcs-Lot-Speaker-Amplifier-Terminal-Binding-Post-4mm-Banana-Plug-Socket-Female-Connector-10pcs-lot/32739527467.html
Hardware
Terminals Connectors :https://fr.aliexpress.com/item/280Pcs-Assorted-Insulated-Spade-Crimp-Terminal-Electrical-Wire-Connector-Set-Red-Blue-Yellow/32810002612.html
6 Ring connectors #4 Blue
3 Ring connectors #4 Red
5 Female Spade Connector Red
Screws :
4 3×10 (front pannel)
1 M4x10 (side)
Schrink tubes :https://www.aliexpress.com/item/385pcs-heat-shrinking-tube-2-1-Shrinkage-ratio-black/32662765147.html
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% Notes:
I’ve put a picture of the orientation that I used to print the top part (rotate 145°) to minimise bridging, but it’s not the only way to print it 🙂
For the front panel, I changed filament color manually at the beginning of the 3rd layer.There is a plug-in for Cura to do this and also a way to do it for S3D users… or leave it the same color 😉
Post-Printing
Parts needed
1 Power Socket W/Fuse & Switch :https://fr.aliexpress.com/item/Free-Shipping-power-socket/476915963.html1 Power Meter :https://fr.aliexpress.com/item/AC-80-260V-LCD-Digital-100A-Volt-Watt-Power-Meter-Ammeter-Voltmeter-110V-220V-free-shipping/32617343719.html1 meter Black & Red 13AWG :https://fr.aliexpress.com/item/1meter-Black-1meter-Red-Silicon-Wire-Heatproof-Soft-Silicone-Silica-Gel-Wire-Cable-12AWG-13AWG-14AWG/32797523458.html1 IEC 320 C13 Female Plug :https://fr.aliexpress.com/item/New-Wholesale-Price-Black-IEC-320-C13-Female-Plug-Rewirable-Power-Connector-3pin-Socket-10A-250V/32808416783.html2 XT 90 :https://www.aliexpress.com/item/5Pair-XT90-XT-90-Gold-Plated-Banana-Plugs-Male-and-Female-Antiskid-for-helicopter-Battery-esc/32460919234.html2 Banana Plugs :https://fr.aliexpress.com/item/4Pcs-Lot-Speaker-Amplifier-Terminal-Binding-Post-4mm-Banana-Plug-Socket-Female-Connector-10pcs-lot/32739527467.html
HardwareTerminals Connectors :
6 Ring connectors #4 Blue
3 Ring connectors #4 Red
5 Female Spade Connector RedSchrink tubes.
Screws :4 3×10 (front pannel)
1 M4x10 (side) -
75mm Filament Spool Adapter 3D Print Model
Summary
Adapts a spool with a 75mm center to fit on a Prusa without hitting the frame. I left the tolerances a bit large, however it works well and the spool turns smoothly.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Doesn’t Matter Supports:
No Resolution:
Low Infill:
15% Notes:
Printed in PLA, but really doesn’t matter as long as it fits.
How I Designed This
designed in Fusion 360 -
Customizable anti-backlash bowden coupling clip 3D Print Model
Summary
There are many designs like that, the one I picked for source is just the most pretty I used, it’s not that it was of particular value in terms of inspiration. Problem is all these designs are either wrong size or ugly and never customizable so I thought I’d solve that problem once for myself (and share here while I’m at it).
The dimensions of supplied stl is for all e3d couplings I have around, if you have different hardware, feel free to customize.
Note: for some reason customizer refuses to open now, so I can’t tell if it works well, but you can either use prebuilt .stl or download .scad and customize. I’ll check it again later and will either adjust it or remove WIP.
Print Settings
Rafts:
No Supports:
No -
WaterRocketLauncher 3D Print Model
Summary
This is a WaterRocketLauncher for launching water bottles.
Print Settings
Printer:
Davinci 1.1 plus Rafts:
Doesn’t Matter Supports:
No Resolution:
0.3 Infill:
90-100% Notes:
WARNING!! Take care and wear at least safetyglasses when things get under pressure. It is hard to tell how much force a 3D-printed part will survive as this depends on your used material and printer settings. Be prepared for the case something breaks!
If you choose to mount it on a baseplate around 3-12mm thickness you dont need to print a baseplate (there are 3 different versions) and mostly no “VentilGuide”.
If your baseplate has under 5mm you may want to print out and use the “VentilGuide”
Depending on the thickness of your used baseplate and if you use a HolderExtension you may have to use longer screws than the stated M3x20.
A HolderExtension is needed if you cannot find a bottle suitable for the original length of the holder.
Baseplates, HolderExtendsion and VentilGuide are optional, you need at least the Holder, Clamp, StabilizationPlate, Stabilizer and Clip.
Take care to print the parts in the correct orientation, some .stl-Files need to be rotated to be printed correctly. (StabilizationPlate 90 degrees, Clamp 180 degrees)
Post-Printing
What you need
Printed Parts
Bicycle tube including the ventile
Screws (6xM3x20, 1xM3x25, 9xM3 Nut, 2xM3 Washer 3,2mm DIN125 )
Springs (two or if you have a long one cut it into two pieces)
Something to mount the rocketlauncher on, up to your creativity what you use
Maybe some pressure tube to get some distance between you and the launchpad 🙂
Preparation
Cut the bicycle tube the way that you get the ventile including a circle of tube around it that fits into the holder printed before.
Redrill the holes with a 3mm drill to ensure that the M3 screws fit into the holes Assembly
Put a spring on the ventile and place it into the holder. Depends on the spring you use, if you find it not stable, try to add a washer between the spring and the ventile/tube-part.
Mount the StabilizerPlate, Clamps, Stabilizer and Holder together as shown on the image. Don`t tighten the screws of the Clamps too much. It should move easy to securely launch the rocket later.
You can use some grease maybe if it is needed. Also it may be a good idea to use 2 nuts or some screwlock glue to prevent the nuts from loosening themselves due to clamp movement. -
Garden Map Free 3D Model
This project is used as an assessment requirement for Digital Modeling for 3D Visualization Course Diploma 3 Program of Informatics Engineering, Telkom University,Indonesia
-
Countryside Asset Pack Free 3D Model
Some objects may turn black when zoomed out in the viewport, but will show up in the final render.
-
tomato character(Tubes PDV) Free 3D Model
I created this tomato character with texture and animation as a requirement for my big task in 3D visualization modeling course. in this character there is animation jump, road, menunju, and laugh.
I beg you not to reject my character again -
LOW POLY RAT Free 3D Model
Its is a low poly rat and its a complete rigged rat. This low poly rat is used as an assessment requirement for Digital Modeling for 3D Visualization Course Diploma 3 Informatics Engineering, Telkom University, Indonesia. You can use this for animations or video games that u’ll make. The modified model is based upon user stepofway’s original creation. Good Luck for me! Cheers!
-
4s10p 18650 battery holder for 14.4 volt with 1/4 inch bolt holes and tab slots 3D Print Model
Summary
This is a 4s10p, 18650 battery holder for a 12 volts system (with a low voltage cutout and a DC-DC buck). Nominal voltage of 14.4 with a high of 16.8 volts. It holds 40, 18mm cells snugly.
I added a 1/4 inch bolt hole to bind everything together, mount to a case.
One of each file should be printed to get the tabbing and alignment correct. They’re labeled top and bottom, but they could be used the other way–top as bottom and bottom as top (or left side right side, etc).
Each staggered row should be tabbed down the middle with cells alternating anode – cathode – anode – cathode (in series) and bridged over the tabbing slots to the next row with the cells aligned the same as the previous (in parallel). If you don’t understand how this works, study up.
Built for my portable solar kit. -
“Batman Returns” Remote Batarangs 3D Print Model
Summary
The Completely ridiculous use of a Batarang. Or at least just Ridiculous execution. Fun Design tho. -
Arkham Knight Style Beyond Batarang 3D Print Model
Summary
Based on the Arkham Knight Beyond Batarang. I love anything Batman Beyond
