Summary
Designed to store roughly 80, 2″ tokens
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Webcam mount for 2020 rail. 3D Print Model
Summary
I made this mount to mount a cheap YoLuke webcam from Amazon on my 3D printer. The printer has an Octopi setup on it and I wanted to be able to check up on prints for anywhere in the house.
Hardware needed:
Reused the hinge pin from the Webcam
2 x 3mm x 8 screws
2 x 3mm t slot nuts.
Print Settings
Printer:
Tronxy X5S Rafts:
No Supports:
No Resolution:
.2 Infill:
25 -
Lithophane Stand with Candle Holder 3D Print Model
Summary
This is a stand that holds a lithophane and a candle to make it glow. To make the lithophane, go to http://3dp.rocks/lithophane/
Settings for Lithophane:
Main page – Outer Curve
Image Settings – Positive Image
Holds a standard tea candle. Fit can be a little tight on some of the lithophanes, a little sanding makes it fit fine. Plus you can swap them for different images whenever you want!
Pretty new to 3D printing, so I’m open for feedback!
Hope you all like it!
Print Settings
Printer:
Monoprice MP Select Mini Rafts:
No Supports:
No Infill:
20 -
Darth Turkey 3D Print Model
Summary
Even the dark side enjoys Thanksgiving. Enter Darth Turkey! This model was inspired by a school craft my nephew brought home. I used Meshmixer to combine 3 other projects.
Silly little turkey modelhttps://www.thingiverse.com/thing:1124349
Darth Vader Key Fobhttps://www.thingiverse.com/thing:860156
Lego Minifig Darth Vader Chest platehttps://www.thingiverse.com/thing:580394
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.10mm Infill:
15% Notes:
To get the multi-color effect, I changed the filament a few times during the print.
0.0 Vertigo Grey
4.1 Silver
10.0 Vertigo Grey
10.5 Black
Note: These values would only work if printed at 100% scale and 0.10mm resolution. -
Armchair 3D Model
Additional Info: Armchair Mr Smith N101017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Curtain 3D Model
Additional Info: Curtain N030817 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Geoboard isometric 3D Print Model
Summary
Geoboards Are essential to teach children the concept of Area and multiplication
Print Settings
Printer:
Dremel Idea Builder Rafts:
No Supports:
No Resolution:
0.3 Infill:
10 Notes:
takes 6 hours to print -
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC 3D Print Model
Summary
button MICRO WAVE COMBINED FEATURED DX 24 WHITE
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC
Print Settings
Printer:
Discoeasy 200 Rafts:
No Supports:
Yes Resolution:
0.08 Infill:
50% -
NOW 3D Print Model
Summary
Just a Now’Clockhttps://stealtimeback.com/
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
No Supports:
No Resolution:
0.2 Infill:
normal Notes:
Easy to print, with change filament option / PAUSE function > on the NEVA 3D printer. -
Dicey Peaks Board Game 3D Print Model
Summary
Dicey Peaks is a tile and dice game of exploration and risk-taking, featuring a balance of luck and crucial decision-making as players race to be the first to reach the flag at the summit of Yeti Mountain! I have given you a choice from two dice styles. -
tattletail 3D Print Model
Summary
This tattle-tail from tattle-tail
I used 123d design to make the solid form and blender to sculpted the face and details
How I Designed This
I used 123d design to make the solid form and blender to sculpted the face and details -
Sainsmart Logo Keychain 3D Print Model
Summary
I just found out a won a Sainsmart T-shirt and designed this to celebrate! When I sent Sainsmart the pic on instagram, they requested I put it up on Thingiverse and here we are!
I designed this to be printed in Sainsmart TPU in dual color, as seen in my picture. The layers stuck really, really well! In fact, they may be bonded even better than layers of the same color!
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
0.1mm Infill:
15-25% Notes:
I print at 220C/50C on glass with AquaNet. My initial layer height is 0.2mm and my layer height is 0.1mm. My top and bottom layers are 0.8mm thick (8 layers). I print around 20mm/s with the fan at 100%.
How I Designed This
Designing a Keychain (Fusion 360)
Simply find the logo you wish to design, save it, and open Fusion. Now go to the “insert canvas” option and insert the image. Next, trace it with the tools in the sketch tab (I like arches, circles, lines, and conic curves with roh set to 0.5). FInally, extrude whatever you want to be printed and add a small ring for your keychain! -
Evangelion Head Input 3D Print Model
Summary
Designed in tinkercad, you will need a 5cm brooch as you can see in the pictures
Print Settings
Printer:
Tronxy X3 Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
25%
Post-Printing
paint with black and white -
Panel 3D Model
Additional Info: Panel wood N091017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
100Hex Twirl 3D Print Model
Summary
Hexagon for 100Hex https://www.thingiverse.com/thing:2477471
Other hexagons at https://www.thingiverse.com/thing:2612800
Print Settings
Printer:
Anet_A8 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% Notes:
Nozzle 0.4mm
Layer height 0.2mm -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels and added mounting holes. -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels, and added mounting holes. -
3.5 Inch Wheel Chocks With mounting holes. 3D Print Model
Summary
I took Fireflynj wheel chocks and added mounting holes. -
placa en relieve 3D Print Model
Summary
placa en relieve
Print Settings
Printer:
hephestos Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% Notes:
placa en relieve
How I Designed This
placa en rellieve -
High pressure nozzle Free 3D Model
High pressure nozzle, the nozzle is in the washing machine or a conveyor for high-pressure wash head Using high pressure water, through specific high pressure spray pressure head According to the different pressure and different pressure head structure, can transform water into water mist or water knife or comprehensive use, nozzle is a specially designed at the same time, the Angle conversion, etc Concrete can discuss, and the author would like to share this with everyone.If you like,you can paypal for you to get this models or if you have any questions also you can email to me.
-
Hand Rail Bracket Hook 3D Print Model
Summary
This hook slides overtop of your handrail bracket. It provides great storage on the stairs for bags you need take on the go!
I scaled these hooks to my handrail brackets, but they should work fine if you scale them up or down to fit your handrail bracket sizes.
Holds up to 15 LBS!
Print Settings
Infill:
100 Notes:
I would recommend 100% infill if you have something heavy to hang.
I have tested this with up to 15 LBs and it holds it fine when using 100% infill.
How I Designed This
TinkerCAD.com -
Halo Chain Gun Turret 3D Print Model
Summary
Cut of the Halo warthog chain gun. https://www.thingiverse.com/thing:2638418
You could add this to other custom makes or toys. -
Oval rail end cap 3D Print Model
Summary
I used 115mm x 43mm oval “cattle” rail to make roof racks for the car. I needed to cap the ends to stop wind noise so I designed these.
Cattle rail can be used for all sorts of things apart from fencing and these end caps finish it off nicely.
I use a dab of Trex to hold them in place but you could also use a rivet or screw.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
No Supports:
No Resolution:
0.2 Infill:
100% -
Tormach TTS Tool Tag 3D Print Model
Summary
Print it out and use a sharpie or paint marker to put a tool number on it. Then snap it into the ATC grove of a TTS tool. -
T-Fix insert for n-handle Suex scooter 3D Print Model
Summary
T-fix insert for tho N-handle/Powergrip-handle of Suex DPV´s -
Sandpaper holder 3D Print Model
Summary
You will need some infill if you want a bottom on the model, I use around 20-30% infill
Print Settings
Printer:
Alunar M505 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
20-30 -
Nintendo SNES Cartridge Dust Cover / Storage Sleeve 3D Print Model
Summary
This thing is a storage solution for SNES (Super Nintendo) cartridges. Normally, SNES cartridges don’t stand on their side. This cover fixes this problem so you can store your SNES carts vertically on a shelf conserving space and allowing you to see all your cartridges. This cover is modeled after the classic NES dust cover.
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
Doesn’t Matter Notes:
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”. -
SX350J vape mod with 26650 or 18650 adapter V2. 3D Print Model
Summary
SX350J vape mod with 26650 or 18650 adapter V2.
For YiHi SX350J Boxer mod by Ginger Vaper, just disassemble the mod and transfer everything (except lower battery connector) into this enclosure. This enclosure only use 1 battery (26650 or 18650) so you can charge the battery directly using USB port. -
CGC Classic: Cartoon Turtle Free 3D Model
In the 7 part tutorial series by David Ward that this file is the source for, learn how to create a cartoon turtle from default cube to complete animation.
-
Box for tea bugs 3D Print Model
Summary
I am baying big package of tea (100 bugs) and this big box looks on my table is not good.
I made small box for tea bugs.
Use PLA plastic or harmless for food.
Print Settings
Printer:
Anet A6 Rafts:
No Supports:
No Resolution:
0.2 Infill:
10 Notes:
PLA -
Mario Odyssey Spinner 3D Print Model
Summary
A Mario Odyssey spinner! Not much more to say other than this: Odyssey is awesome! Almost as good at 64 and Sunshine. Perhaps even just as good as those two. -
Jarl – Vikings Tile Laying Game 3D Print Model
Summary
In the long winters between raiding seasons, warriors keep their intellect sharp through games of wits and chance in this game of stone placement filled with tactics and subtle maneuvering for victory.
Jarl – The Vikings Tile Laying Game is powered by The Duke game mechanic.
Players move their warriors (tiles) around the board and flip them over after each move. Each tile’s side shows a different movement profile. If you end your movement in a square occupied by an opponent’s tile, you capture that tile. Capture your opponent’s Jarl to win! -
Ikea Lack Table Filament Guide 3D Print Model
Summary
Build this as a filament guide through a 1/4″ hole I drilled in my Ikea Lack Table for filament.
You can view and/or download the source file from here
The exterior diameter is 4.5mm while the interior is 3mm (good for 1.75mm filament, which is my use case)
I plan to make a better version of this soon, but this is currently what is fitted in my setup until after the holidays.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 Layer Height Infill:
100% -
rj45 dual breakout board mount for maker713 light for ft-5 3D Print Model
Summary
ive tested this and the belt moves freely behind the bracket and the breakout board is still mounted below for clean wiring
Print Settings
Rafts:
No Supports:
Yes Resolution:
.2mm layer height -
Cook top 3D Model
Additional Info: Cook top Faber N141117 – 3D model (*.gsm+*.3ds+*.max) for interior 3d visualization.
-
House 3D Model
Additional Info: House garden N120917 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Soxtenor ( sostiene celular ) 3D Print Model
Summary
soporte para cargar tu celular- cuida tu celular de caídas bruscas en tu mesa de moche o peinador
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Infill:
PLAStandards
NGSS
-
Poly Phone Stand 3D Print Model
Summary
This Phone Stand is made with Poly. The first bio, portable,multi-tool and battery powered 3dprinter.
Newsletter >>> https://www.poly3dp.com/newsletter-signup/
Print Settings
Printer:
Poly Rafts:
No Supports:
No Resolution:
0.2 Infill:
15 -
Trash Compactor Knob 3D Print Model
Summary
bought a trash compactor at a Habitat For Humanity ReStore, and it came with out a knob, so i made one up real quick.
this fit a bit tight with my printer, but it works flawlessly in the compactor.
you may have to fudge the dimensions a bit, or do some post-processing to get it to work.
it does need supports to print this.
i printed it with the knob face down, and supports for the overhangs. -
Business & Shop Sign Pack 3D Print Model
Summary
Business/Shop Sign Pack
3D Signs don’t fade away like Painted ones!!!
All Modelled to have a 1/8″ thick Base Plate.
All modelled to be ~3/8″ height overall.
Item is not For Sale, Royalty Free.
[ Do Not Sell nor Re-Distribute my Work ]
[ & Don’t be a Punk, and try to Claim my Work as your Own ]
[ reguardless of your Ignorance of the Fact ]
If someone wants to make this item, give them the Link to download these files.
No one is permitted to Sell or Redistribute anything of Mine. Ever.
Nor are you allowed to Print my Works, and Sell them. (Monetary Gain is not Permitted)
You’re Welcome, for All that is I.
Do not Abuse this Privilage. -
Chemistry Ring stand adapter 3D Print Model
Summary
We’re doing marble runs, and instead of books and rulers, I made adapters to fit the foam pipe insulation for copper pipe to the chemistry stands. It looks pretty good and works well.
102% gives a nice fit that can be moved easily, 100 percent fits but TIGHT!
Probably not too useful since plain old masking tape or zip ties could do the same thing, but whatever, the students were impressed.
Print Settings
Infill:
10-20% Notes:
Works best at 102 percent. -
Misc Plaque Pack 3D Print Model
Summary
Miscellaneous Plaques
All Modelled to have a 1/8″ thick Base Plate.
All modelled to be ~3/8″ height overall.
Item is not For Sale, Royalty Free.
[ Do Not Sell nor Re-Distribute my Work ]
[ & Don’t be a Punk, and try to Claim my Work as your Own ]
[ reguardless of your Ignorance of the Fact ]
If someone wants to make this item, give them the Link to download these files.
No one is permitted to Sell or Redistribute anything of Mine. Ever.
Nor are you allowed to Print my Works, and Sell them. (Monetary Gain is not Permitted)
You’re Welcome, for All that is I.
Do not Abuse this Privilage. -
MRM Reaper VTX Mount 3D Print Model
Summary
Multi Rotor Mania (MRM) Reaper VTX antenna mount designed for TBS Unify Pro. I have two designs. The first one I did has the antenna pointing up slightly for better antenna orientation during flight and second one points down and under the blades for better protection from gate strikes. Photo is the down position version. I also added a tab to zip tie the battery leads out the back and help protect the solder pads of the FC/PDB during a battery eject crash 🙂
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
30%
Post-Printing
Your will need to clear out the holes for the stand offs. I used a #8 drill bit for this. -
Armchair 3D Model
Additional Info: Armchair 5 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Hobby Lobby Hunter/Tornado suspension arms 3D Print Model
Summary
Longer suspension arms for the Hobby Lobby Hunter & Tornado RC cars from the early 80’s.
Front and rear track will go up 60mm total.
The front A-Arms have print in place ball joints. Before use, rotate the ball 180 degrees. The cup in the ball is designed to firmly hold the front axle knuckle king pin pivots.
Zero caster and camber.
Upper arms were designed to maximize shock travel and angle within the space provided. This created a much more damped feel, but you will probably need to adjust your spring perches.
Lower arms were designed to accept anti roll bar end links.
Rear upper arms were designed for equal length suspension.
Bump stops are setup for ~40 degrees total movement. ~20 degrees at max droop and compression. This should help keep the dog bones from popping out and for sure will keep them from binding against the drive cups.
As much as possible, all hardware is reused but you will need to source a few things.
Required parts:
4x HPI Dogbone #101064. But any dogbone that is 90mm long from center to center, and has 8mm drive balls will work.
Longer steering links
8x M3 x 18mm screws
8x M3 nylock nuts
I’m fairly certain, like 99%, that these will bolt right up to a Robbe Pantera, Serpent Cobra, and Graupner Hunter.
I’m 100% certain these will bolt right up to a Skyward Labs Mean Mudder. -
Hobby Lobby Hunter GoPro mount 3D Print Model
Summary
GoPro mount that bolts to the roll cage of a Hobby Lobby Hunter.
Required hardware:
2x M3 x 10mm bolt
2x M3 nylock nut -
Box for controller motor 3D Print Model
Summary
simple box for motor controller.
https://www.amazon.it/gp/product/B0116R4FMY/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Extended Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
Venezuela 3D Print Model
Summary
Logo Venezuela Geometric (logo geometrico de venezuela para ser configurado en distintas escalas)Standards
NGSS
Overview and Background
Lesson Plan and Activity
Materials Needed
Tiansee
filamento bastante bueno -
G-Bustr Logo (version 1) for Single Extruder 3D Print Model
Summary
This is an improved version from the previous: https://www.thingiverse.com/thing:2642466
To completely get rid of the sharp edge at the left hand of the lower ghost body part, make sure all the printed support residuals are cleaned.
Happy Printing! -
iPhone X and Apple Watch Wireless Charging Stand 3D Print Model
Summary
Vertical charging stand I designed in Fusion 360 to fit the Mophie QI Wireless charger and the Apple watch charger. Shown in the picture is an iPhone X and an Apple Watch charging at the same time. The iPhone X is encased in a Spigen Ultra Hybrid Case. The Mophie QI charger should also work with the iPhone 8/8 Plus but I haven’t personally tested them with my stand.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
0.3 Infill:
15% Notes:
Fast Honeycomb Infill
Printed at 75 mm/s
Extruder Nozzle 0.4mm
Total Print Time ~ 5hrs -
Carbon Fiber Y-Axis tray Chain Anchor & Lock 3D Print Model
Summary
This is a cable chain anchor and mount for a cable chain that fits the Carbon Fiber Y-Axis tray. (https://www.amazon.com/gp/product/B071LTS8W8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B071LTS8W8&linkCode=as2&tag=communityhost-20&linkId=bed5896d95b8d2ced89cca68414f32f9)
The CF tray zip tie slot is about 3mm further in than the stock aluminum tray zip-tie slot, so all of the cable chain anchors out there won’t work. Additionally, if you’ve installed the removable build plate by billyd (https://www.thingiverse.com/thing:1021403) and used the aluminum carriage upgrade (https://www.amazon.com/gp/product/B0192K4N6K/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0192K4N6K&linkCode=as2&tag=communityhost-20&linkId=1e61bce087154c48393fc54d8e997803), the aluminum carriage is too close to the CF tray to allow a standard mount in there anyway.
So this mount is inverted (screws on the bottom, instead of the top), and thinned enough to allow clearance for bed-leveling of the tray.
It’s pretty straightforward on install, just upside down from a normal anchor for a cable chain.
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Rafts:
No Supports:
No Resolution:
.25 Infill:
20% -
2006 volvo v50 no roof rail caps v3.3 3D Print Model
Summary
I searched everywhere for factory or third party made but none (or im searching at the wrong places) so instead i made my own and share with you. Please feel free to donate for my hard work.
This is cover/caps trim for the holes with snap on design after removal of the roof rails on the 2006 Volvo v50. May need additional “body” work like applying bondo, primer and paint to match the color of the car. A notch has been added for easier removal with a flathead screw driver.
Newer version is coming as i learn more on how to manipulate the 3D maker program.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk1 Rafts:
No Supports:
No Resolution:
0.2 Infill:
min 25% -
Army Board Game 3D Print Model
Summary
The game is played with 36 pieces each on a 9×10 square board. Each piece has a numeric value, which is hidden from the opponent and only revealed when an attacking piece moves onto a square occupied by an opponent’s piece. In most cases, the piece with the highest value wins and the losing piece is removed from the board. -
Starfinder Society Badge 3D Print Model
Summary
Starfinder Society badge/emblem. Designed in Fusion 360 and printed on my Raise3D N2 for use in my gaming group. -
Luster 3D Model
Additional Info: Luster DL18395_13WW – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Apple iPhone X dock for IKEA RÄLLEN wireless charger 3D Print Model
Summary
[ REMARK: PICTURES ARE BEFORE POST-PRODUCTION ]
I had picked up my iPhone X (I was 2nd in line on friday morning, yay!). I bought the IKEA RÄLLEN wireless charger for €14,95 as it was by far the cheapest, but for both next to my bed and on my desk I wanted to be able to put my iPhone up in a dock, instead of laying it flat on the charger. So, I figured, why not make one myself?
It has been designed to be stable and solid, but be rather quickly printable and save some material. I printed it both in PLA and wood (I love the look / feel / finish) and both turned out great. It has too been designed specifically so the charger is located in the center of the iPhone. That way, even with a case like my Apple silicone case on it, it has no problem connecting and charging. I didn’t think it would be a problem until the charger ended up being too low in the prototype, which on the other end should quite well work for the smaller iPhone 8 (I’ll upload that one later).
My next design will be a separate Apple Watch dock that can be connected to this one, forming a modular solution and leaving the choice for either one or a combined dock. Keep an eye on my designs for this one in a few days! Hope you guys
Print Settings
Printer:
CraftBot+ Rafts:
Doesn’t Matter Supports:
Yes
Post-Printing
It needs some work to make the text on top look smooth, as well as the surfaces may need some post-production smoothening (differs per settings / printer ofcourse). -
Keychains 971 / 974 (Guadeloupe) / (Réunion) 3D Print Model
Summary
Porte-clés avec numéro des départements français d’outre-mer.
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
No Supports:
No Resolution:
0.2mm Infill:
33% -
steering shock bracket 3D Print Model
Summary
custom design steering shock bracket for 97 ram 1500 4×4 -
Cap Free 3D Model
Ceramic Cups.Modeling in vray 3.60.0.3 in the scene only cap. unnecessary objects are removed.
-
Phone Holder 3D Print Model
Summary
This is a phone holder I designed primarily for larger format cell phones (5.5 inches) but it will probably work for small tablets also. Add some anti-slip nibs on the bottom surface.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Infill:
10% Notes:
I printed wit 70% overhang supports (90 deg being horizontal surfaces) and obtained good results. -
“This Is Fine” Desk Caddy 3D Print Model
Summary
This is a standard desk caddy for organization with the classic internet comic “This is fine” extruded into the main face. No important instructions for it, other than it should be turned 90 degrees to face upright. Prints well at 0.2 mm layer height and even better at 0.1 mm layer height (pictured) as there is more detail in the comic.
Enjoy! -
Inkbird ITC-1000 Temperature controller case 3D Print Model
Summary
My mom’s prehistoric food dehydrator quit working due to the thermal fuse blowing. after replacing it twice I decided that the problem was more likely to be the thermostat sticking, and decided to replace it. Amazon search for PID ended up showing the Inkbird ITC-1000 ( which is not a PID, I didn’t realize that when i bought it)
I liked the 10A contact rating for the internal relay, so i got one and had to figure out how to mount the ‘PID’ controller.
I made this box and mounted it and the unit works great now. heats up faster then when i used my external PID (my real Pid controller)
The Box has cut outs at the back for surface mounting the box and cutting or drilling the holes for the wires into whatever you want to control. I used 1 3/4″ 6-32 screws to mount the box, after I used a drill to clean out the holes. I had to sand the mated edges of the box to get a snug fit, like a few thousands of clean up. I printed this in ABS with .2mm layers and 3 outlines and 3 top and bottom layers on my Flashforge creator pro.
As always I uploaded my Sketchup files in the event anyone wants to change the design easily. Please comment if you build. I like comments. -
Apple MacBook USB-C Docking Station 3D Print Model
Summary
I got this great little USB C Hub, however when ever I moved the computer the hub would wiggle and eventually disconnect.
This dock solves this and props up the computer a bit more making it more natural to type.
If your printer is too small to print the strip in a single piece, you can use the connector to join the two parts.
I used NinjaFlex at 50% infill and rubber ciment to glue them together. -
Designer Vase 3D Print Model
Summary
Simple minimalistic vase that looks great and can function as pen holder, flower pot and much more.
Use vase mode for best results.
Happy printing! -
desk thingy 3D Print Model
Summary
pen organizer
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Rafts:
No Supports:
No Notes:
the base and cubes have no tollerance, as I CNC’d the base. If you print it you probably need a bit of tollerance, use f.e. CURA horizontal expansion for this. -
Lamp Shade 3D Print Model
Summary
Need something to lighten up your day?
Try using this lamp shade full of mesmerizing lattice structures.
This current design is for C7 bulb but is universal as its’ size is scalable for other bulb types.
For assembly, glue each half together around the bulb.
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.07 -
antibody 3D Print Model
Summary
Stylized antibody model.
Small for 3D business cards.
Larger scale for rare earth magnet.
Print Settings
Printer Brand:
FlashForge Printer:
Finder Rafts:
No Supports:
No Resolution:
High Infill:
80% Notes:
Antibody stylized model.
TrueSpace CAD -
Hypercube Evolution 3D Print Model
Summary
This mount allows you to use the Flexion Extruder with your Hypercube Evolution. It includes a Bltouch sensor mount as well.
The extruder mounts through the stepper motor. To do this remove the top two screws on the stepper motor and replace with 45mm M3 screw going through the top two holes.
The 40mm fan mounts on the front. You will need two spacers. I had two spare from my old duplicator but you could print some from (https://www.thingiverse.com/thing:1656609). Between the 40mm fan and the spacer is the radial fan mount. I hot glued the radial fan in just to be safe but it really did not need it.
I printed the fan mount with supports and both with 50% infill. -
Spielfigur – Ludo 3D Print Model
Summary
This is a Toy figure, refrigerator magnet
Different to the original is the size and the magnet in the bottom
Print Settings
Printer:
anet a8 Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Notes:
Print with Brim -
Bump Vase – Solid Remix (Lower Poly) 3D Print Model
Summary
Made it solid to accommodate printing in vase mode.
Also made it a lower poly version.
I printed with a0.6mm nozzle @ 0.35mm layers, using transparent PLA @ 210° & 80mm/s
Took 2hr7m in vase mode. -
MakerFaire Robot Chair 3D Print Model
Summary
A chair/console seat for the Maker Faire robot.
Based on the single piece print robot from LeFabShop (thing:331035).
The chair has been sized to fit a scaled down robot (around 70%).
