Summary
As I could not find a good complete set of seven RPG dice, I scaled and collected the best dice I could.
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Dice set for D&D 3D Print Model
-
PocketBeagle Case (Rev A2) 3D Print Model
Summary
Just another case for the BeagleBone.org PocketBeagle A2.
Insert a μSD card into the PocketBeagle. Test that the image/board combination works before continuing. Power down.
Place the PocketBeagle into the case and carefully press (minding the USB port) it down past the retainer bars on both sides.
Put the cap on the case and use. -
remix of MrCrankyface by Flyon20s axles middle axles with servo mounts 3D Print Model
Summary
I wanted to build an 8×8 Hemmt. I am new to 3d design so I didn’t want to get into designing gears so I found the mid axles and adapted them for leaf springs and made them longer because my vehicle is wide. I did not have room to put my servos on the frame so I added a mounting plate on the tops. they need tweaking because my turning radius is horrible. I was going to wait till got it working perfect. I will be posting the Hemmt frame and body soon.
Print Settings
Printer:
anet A8 Rafts:
No Supports:
No Resolution:
.02 Infill:
20% Notes:
I printed the half shafts at 100% just for extra strength might not be needed. -
Thor Ragnarok Swords 3D Print Model
Summary
Woo!
One day late, BUT, they’re finally finished! Both swords, screen accurate (as far as I can tell) and fully printable. As with all my swords, they take a metal support rod, 3/16″, that is slotted down the middle. A real passion project of mine. I hope you all enjoy!
Please print and show me if you love it and are faster than me, my printers are kind of slow and old.
Please leave a like and follow me if you want to see more cool stuff like this.
I will also soon be streaming on twitch.tv/polygonaut
Cheers! -
Black and Decker Workmate Bench Top replacement Block 3D Print Model
Summary
Lost some of these on my workmate over the years so modeled one up and printed. Works well.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Yes Supports:
Yes Resolution:
.1 Infill:
50% -
Case for ELECROW 5 inch LCD RPA050105 3D Print Model
Summary
This case is for Elecrow’s (waveshare) 5 inch lcd screen. This is part of a project to create modular components for a portable handheld gaming system. This way novices can assemble any models they want to use and essentially “snap” them together to quickly prototype. The Fusion 360 project file with all the sketches step by step instructions for creating the model (so that you can easily modify it). This is released under the public domain license so you can use it for reference, modify, or incorporate it into your project and sell it.
Fusion 360 project file:http://a360.co/2hgJZIF
I bought mine on Aliexpress, but here’s an amazon link to the screen.https://www.amazon.com/Elecrow-RPA05010R-800×480-Display-Raspberry/dp/B013JECYF2 -
Shuriken Hand Spinner 3D Print Model
Summary
Shuriken hand spinner. bearing 608 + 7 balls 9.5mm (3/8 inch)
How I Designed This
Fusion360 -
ADT Night Alarm Cover 3D Print Model
Summary
The alarm panel in the bedroom is really bright at night and I always end up covering it with an item of clothing. So I decided to make a better fix for this problem. The cover is for an ADT alarm screen and only covers the screen so the buttons are still usable. The design is made to wedge in the sides as there is no top lip above the screen to latch too.
Hope this makes your room darker like mine and you get a better night sleep. 🙂
The print on high quality took 25 mins.
Print Settings
Printer:
Raise N1 Rafts:
Doesn’t Matter Supports:
No Notes:
Very quick print -
door handles 3D Print Model
Summary
i make 4 door handle to use on drawers
in french
j’ai réalisé 4 poignées pour des tiroirs
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
15% -
lissajous spirograph 3D Print Model
Summary
This is a code by a french mathematician from Thingiverse, except I can’t find their name and page. The cube goes flat with nbr = 4 and 6 10 14 18 22 -
Led lamp holder 3D Print Model
Summary
Led lamp holder for this led lamp:https://www.amazon.it/gp/product/B01HO2OIHW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Made in two parts. -
AUSINIAssemblingmasterNO254223in1 Free 3D Model
Set series “Transport” manufacturer “Ausini” is a designer 3 in 1, details of which you can collect three different machines: a helicopter, boat and plane. These models will perfectly fit the interior nursery or other where the presence of the child. All three models are in one file. The render is made separately for a better overview.
-
Minecraft Piano Free 3D Model
This is a Minecraft Piano
I dont know what can I say anymore
so download it if u guess this piano is quite good -
Minecraft Bow(bendable) Free 3D Model
This is a Minecraft Bow
the first minecraft bow rig with bend perfectly
watch the tutorial video before download-
-
Octopus Stand V3 portable 3D Print Model
Summary
It’s a remix from notcolinforreal’s Octopus Standhttps://www.thingiverse.com/thing:607518
Put a hole on it to make it portable.
Print Settings
Printer Brand:
Zortrax Printer:
Zortrax M200 Rafts:
Yes Supports:
Yes Resolution:
0.14 Infill:
Mediem -
AR-15 Silhouette 3D Print Model
Summary
I love making silhouettes here is an AR15 silhouette
Print Settings
Printer:
CR10 Rafts:
No Supports:
No Resolution:
0.3 Infill:
100 -
Wizard101 – Bengal Tiger 3D Print Model
Summary
This is straight from the game’s files.I smoothed it out in 3ds Max, so it looks a bit more smoother than the one in the game.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
.2 Infill:
10 Notes:
Be careful with the supports. I printed it in the position that it is in the stl file, and the legs broke off (had to superglue it). The tail snapped off as well, but I left it out in the pictures because I thought it looked better without it. -
Rocket 3D Print Model
Summary
A simple rocket. I give credit to Tinkercad for the software in creating this. -
Medieval Weapons Pack Free 3D Model
Medieval Weapons PackIncludes: Bow(Rigged), Arrow, Spear, Sword, Club with spikes and Medieval Axe
-
Armchair 3D Model
Additional Info: Armchair 4 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Curtain 3D Model
Additional Info: Curtain N101017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Additional devices Basic PROxima ekfgroup 3D Collection
Additional devices Basic PROxima ekfgroup 3d Models
-
Feiyue FY-03 1/10 mg995 servo mount 3D Print Model
Summary
This is a vertical adapter for the Feiyue FY-03 to fit a TowerPro mg995
You need to mark out and drill/melt 3 new holes in the base of the car to fit this new mount for your steering servo. (I have no phone at the moment, pics will be added soon.)
Freecad included -
Fiat-Garmin mount 3D Print Model
Summary
Perfect for my Fiat Punto. Matching steel spring (from a ballpoint pen) is needed.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0,2 -
Modified R_Z_Top bracket 3D Print Model
Summary
Modified R_Z_Top bracket, moved the Stepper bracket to the far right to so that my ‘Oldham’ does not foul the X Carriage. -
Xeon Phi passive-to-active cooling adapter 3D Print Model
Summary
This is a simple blower fan adapter for the Intel Xeon Phi coprocessor. With this you can adapt a blower fan to the Phi to make a passively cooled coprocessor become actively cooled. This is ideal for use in systems that do not otherwise have enough cooling capacity to cool passively cooled devices such as Nvidia Telsa P100 or V100 GPUs. -
Iron Man Tap Handle 3D Print Model
Summary
An Iron Man Tap Handle I made for my kegerator. I printed in PLA at 75% with support. The hole in the bottom is for a tap handle insert. Print, remove the support including the support inside the hole in the bottom, and thread in the insert. If the hole is too small, heat up the insert and you can thread it in hot because it melts the PLA.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
Doesn’t Matter Supports:
Yes Infill:
75% -
Female High-Heals Shoes | Prom Shoes Free 3D Model
High class female high-heals shoes, A light weight pair of shoes is for you, you may open to use it in any way, no credit is required.
-
High Class Female Long Shoes Free 3D Model
High class Female long shoes, A light weight pair of shoes is for you, you may open to use it in any way, no credit is required.
-
Shark model for cartoon or underwater project Free 3D Model
Shark model for cartoon or underwater project, its a simple light weight model and not rigged yet.
-
Vintage Pocket Watch Free 3D Model
In blend file for chains applied curve deformer for animation with hooks.
-
Fish model for cartoon or underwater Free 3D Model
Fish model for cartoon or underwater project, its a simple light weight model and not rigged yet.
-
@utumn 2017 – Textures Vol – III (Desert Rose Dry Flowers) Free 3D Model
17 Desert Rose Dry Flowers images Texture (3 resolution 1000, 650, 300 px) with 4 type of Bump Map and Alpha Map and Normal Map and Displacement Map, created 3 groups of these textures. Ready to use for cycles 3 node groups (all 3 type of size ) for easy setup your textures according to requirement.
-
Sloppy CGI base Free 3D Model
A simple and cute anime base. Comes with guide sphere for hair creation.
-
M1907 Winchester Self-Loading Rifle Free 3D Model
This Self-loading rifle out of WWI had a high caliber bullet to take out enemies quickly. The gun itself was quite easy to make, but due to complications with the barrel, it was hard to make deadly accurate sights. They’re not bad, but they’re not great either. The gun itself is quite low poly at only 6,517 triangles total. It features a wood material/texture, as well as colors with some specular options enabled.
-
Jason with the Golden Fleece Free 3D Model
Jason with the Golden Fleece (A52), (1803), Bertel Thorvaldsen (1770 – 1844), made in Rome, marble, height: 242 cm. Thorvaldsen museum (Copenhagen, Denmark). Made with ReMake and ReCap from AutoDesk.
-
FFG LCG Deluxe Box Trays 3D Print Model
Summary
This is a set of card and token holders for several of the Fantasy Flight Games LCGs. This will work in any of the games that use the older style boxes with a removable lid. These include the Star Wars LCG and Lord of the Rings LCGs. Unfortunately, FFG has moved towards a cheaper tuckbox style for their newer LCGs. The card holder is designed to work with standard FFG “gray” card sleeves.
I like to print the components separately, but did include a file with the three pieces together.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2mm Infill:
N/A -
Nerf FPV 3D Print Model
Summary
Experience your Nerf battles in a new way.. Mount this FPV system on a Nerf gun, find an open and safe area, put a set of goggles on and battle away. Add a DVR system and record your battles in first person view, it’s like playing a video game but you are in the game.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.100-.300 Infill:
100% Notes:
Some sanding may be required to achieve a clean fit.
How I Designed This
fusion 360 -
ISD1820 Recording / Speaker Module Placeholder 3D Print Model
Summary
This is a placeholder you can print and/or incorporate into your models in place of an ISD1820 recording/playback module PCB. Useful for planning or test-fitting the module into your prints or other projects.
There are many variants of the ISD1820 and similar recording modules available online, but this is the one I used for this design: https://www.amazon.com/gp/product/B01I37DBNE
OpenSCAD file is included if you want to modify the geometry.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.3 Infill:
20 -
Teal drone on wheels 3D Print Model
Summary
Teal drone with swivel wheels, use for taxiing on surface to takeoff-point or after landing taxiing toward you…. you can also try some joyriding 😉
Print Settings
Printer:
k8200 Notes:
print 1x body, 3x wheel, 3x wheel support and 3x clip -
CR-10 X & Y Tensionser Remix Kit 3D Print Model
Summary
So I had some issues with both x and y tensionsers I found here and ended up redesigning some of the parts. After the parts are all printed and the existing pulley/tensioner assemblies, switch the bearings and add the bearing jacket and insert on each one. This is a work in progress so the parts are subject to change. -
Toy 3D Model
Additional Info: Toy cow N041017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
60% and under keyboard display 3D Print Model
Summary
Just a simple Wall display for most 60% and under keyboards. sized to wall mount with large command strips. print 2.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
No Resolution:
.3 Infill:
15% -
Dyson to Progress hoover 3D Print Model
Summary
Waht to do with an dead old handheld Progress hoover.
Convert it to a dyson handheld for stair hoovering. -
Simple case for Raspberry Pi 3b 3D Print Model
Summary
Simple case for Raspberry Pi 3b.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20%
How I Designed This
I wanted to design my own case with a more organized pattern. -
Deadpool Head Keychain 3D Print Model
Summary
Awesome Deadpool Head Keychain, 3dprintable and assembled. Create your own at home!
Print Settings
Printer Brand:
Zortrax Printer:
Zortrax M200 Rafts:
Yes Supports:
Yes Resolution:
0.09 Infill:
low Notes:
x — 3.3 cm
y — 4 cm
z — 3.4 cm
Post-Printing -
Proximity sensor support 4mm 3D Print Model
Summary
Support for proximity sensor 4mm for https://www.thingiverse.com/thing:1496019 -
Samsung Phone FREE DOWNLOAD Free 3D Model
WELCOME TO 3DFORMATIONSYou are guaranteed precision component assembly with clean mesh and product lines for HIGH AND LOW POLY based model DATA.FULL SETUP READY TO RENDER FOR: (KEYSHOT) USERS ONLY.YOUR DOWNLOAD FILE INCLUDESX1 3DSX1 IGESX1 OBJX1 3DMX1 BIP KEYSHOT + MATERIAL MAPS + ENVRIOMENT MAPIMPORTANT: SETUP ROOT PATHS TO ALL MAPS (INCLUDED) FOR CORRECT KEYSHOT (RENDER) SETUP.PLEASE CHECK OUT MY OTHER MODELSCLICK ON MY USER NAME (3DFORMATIONS) AT THE TOP OF THIS PAGEFOR MORE INFORMATION GOOGLE (KEYSHOTS) ITS FAST EASY TO USE FOR STUNNING RESULTS
-
Motor Bike Helmet Hanger 3D Print Model
Summary
This is a simple motor bike helmet hanger that can be used to hang a motor bike helmet.
How I Designed This
Design info
Some of the larger more spherical motor bike helmets can be hard to hang.
It also has a center pilot hole on the back in case you wish to screw in from behind. -
Chester “eye bone” 3D Print Model
Summary
Chesters eyebone!! based on the game don’t starve and made with fusion and a little tinkercad
you can find the fur at a craft store and if you have white PLA you won’t have to paint it I just wrote with a color sharpie for the eye and bone detail.
Print Settings
Printer:
Anet A 8 Rafts:
No Supports:
No Resolution:
i dont care what u do Infill:
3-5% -
Halloween tombstone stakes 3D Print Model
Summary
Replacement stakes for holding up Halloween tombstone decorations.
Two stakes per tombstone recommended.
For styrofoam tombstones – Insert the short pointed ends into the tombstone, and the long pointed ends into the ground. (These are usually solid, and the existing holes are fairly short.)
For plastic tombstones – Insert the long pointed ends into the plastic tombstone and the short pointed ends into the ground. (These are usually hollow, so the short end doesn’t provide enough support.)
Print Settings
Printer:
TronXY X1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% Notes:
Rotate to print flat on bed. I was able to fit two at a time on my 150×150 print bed -
1912 Ford badge.logo 3D Print Model
Summary
1912 Ford badge. please enjoy and tip your designer.
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.1 + Infill:
any, but the higher the better Notes:
for best result without the base plate use 80-100% infill -
Armchair 3D Model
Additional Info: Armchair prado – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Vase 3D Model
Additional Info: Vase tulips N240417 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Early rider pusher 3D Print Model
Summary
Push your child and his Early Rider bike using a hiking pole. -
Customizable Origami Sparrow 3D Print Model
Summary
This is a customizable 2D origami art of a sparrow. You can glue it into square picture frame (e.g. Ikea Ribba), use it as pendant, rings, earrings or just place it on a shelf…
Customizable Settings
Use the Customizer or OpenSCAD to create your own customized 2D sparrow.
You can set following paramters:
the max size of the longest side and the height
thickness of the outer and inner outline
Customizable Origami Series
This is part of my Customizable Origami series. Follow me, if you want to be informed about a new part of this series!
How to support me?
Do you like my things and do you want to support me? You can use these links if you want to buy something. This helps me doing more things. Thanks!
Banggood: https://goo.gl/ZXgx3A
Gearbest: https://goo.gl/FfE59f
Aliexpress: https://goo.gl/bQLi15
Print Settings
Printer:
Anet AM8 Rafts:
No Supports:
No Resolution:
0.2 Infill:
50% -
Tarot 680, DJI F450-550, Battery Holder 3D Print Model
Summary
This is a customizable case for drone’s battery. You have to print it as separate parts and then super glued all of them. I layout the parts like that for a better resistance to break.
I am going to use a rubber band to keep the battery in place, tie to the front holder
Pics on my Tarot 680 build are coming soon.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Resolution:
0.20 Infill:
25 Notes:
I am using a tempered glass, with Elmer’s violet stick school glue. And after each print I clean my print plate with isopropyl alcohol, the adhesion is very incredible. I also have my printer fully enclosured, much heat, the better.
Happy Print!!! -
Ween Boongish 3D Print Model
Summary
Went to a ween concert on Halloween. Figured this was necessary. -
CGC Classic: Stuffed Elephant Free 3D Model
Celebrating CG Cookie’s 9th Anniversary we bring you some of the first Blender tutorials that paved the way for our Blender instruction!
-
jigsaw 3D Print Model
Summary
film, moviesStandards
NGSS
Overview and Background
Lesson Plan and Activity
Materials Needed
-
Large Ramps 1.4 Case – Right Handed Version 3D Print Model
Summary
You don’t have enough space with conventional ramps 1.4 cases? That’s all you need! Inspired by Dasaky’s Ramps case. This is the right-handed version of my previews Large Ramps 1.4 Case, it measures 100mmx150mm, plenty of space for wires management and heat dissipation.
Left-Handed Version: https://www.thingiverse.com/thing:2618146
Print Settings
Printer:
Prusa I3 like Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.25 Infill:
30% -
disney magic band 2 holder with ears 3D Print Model
Summary
kids don’t want to wear the disney magic band,
I found a design by GordonInnovations,
I add two ears, hope you like it. -
Teal Modular Addon System 3D Print Model
Summary
Following the quick-swap, modular mentality of the Teal Sport, this ‘thing’ is a modular addon system that allows for modules to be snapped into the top and bottom of the drone. A few addon modules are shown here, but the possibilities are endless.
Rocket Launcher
The rocket launcher module attaches two rockets beneath the drone. The rockets shown are based on the 1/4A rocket motor. Launch control is handled by an arduino and some supporting circuitry (an Arduino is overkill, but it’s simple to show). Launch could be triggered through an additional radio or by detecting certain movement patterns with an accelerometer.
…standby for more modules!
Note: I do not own this drone so exact dimensions may need tweaking. If I win this contest, I will for sure be fleshing out and building the rocket launcher 🙂 -
Model0001 Plant Pot 3D Model
Free for use 3D model of plant pot, for test.My facebook: https://www.facebook.com/alex.kuoric.7Hope you like it!
-
Church 3D Model
Additional Info: Church 2 N140917 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Squid Jig size 3.0 3D Print Model
Summary
This is my design for a size 3.0 squid jig.
Print Settings
Printer Brand:
RepRap Printer:
RepRap Kossel Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
10% Notes:
Use glow in the dark PLA for better performance at night.
Post-PrintingThe first thing to do is to print the parts, and get the other hardware together.
You will need:
Wire for the nose ring (I used stainless lock wire)
Lead for the keel weight. You can use a sinker, or any lead really, bash it into shape. This needs to weigh around 4 grams.
Barb crown for the tail. You can either cut up a small pencil jig, or get a new set of barbs.
The best I’ve found are Harimitsu brand, you can get these here: http://www.fishonproshop.com.au/fishonproshop/SelectProd.do?prodId=657The parts go together like this.
Glue the two halves together, with the nose ring and lead keel in place. Leave the barbs out for now, you can put them in later.
Have fun with masking out the lure and painting it. Ensure that you sand the layer lines off before painting.
Glue the eyes in after painting. I print the eyes in black filament, so that there is less to paint. You can use whatever colour you like, obviously.
After painting, you can cover the lure in a layer of clear epoxy. Keeping the lure rotating for a couple of hours can keep the coat more even, and eliminate drips. This is a simple setup to keep the lure rotating while the glue cures.
Finally, glue in some feathers and the barb at the back, and you’re ready to catch some squid!
