#DAGOCULTS
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Model wall shelf (collection) #DAGOCULTS 3D Print Model
Wall shelf for figurines (collection)
This shelf makes it possible to arrange and to classify all type of collection.
Shelf can be expanded according to your needs.
The total printing of this shelf requires a printer with a tray of at least 70 * 70 cm.
However, a printer with a 20 * 20 cm tray is enough to print one of the four pieces of this shelf
#DAGOCULTS -
Custom-made figurine shelf (collection) #DAGOCULTS 3D Print Model
This piece of furniture allows to organize and classify all types of collection (figurine).
This piece of furniture can be enlarged according to your needs.
Each piece of this piece of furniture is printed on any printer with at least one 20 * 20cm tray.
The two different pieces of this piece of furniture fits perfectly together and allow them a perfect balance of this piece of furniture.
#DAGOCULTS -
Celtic cross 3D Model
3D model is an Celtic cross for visualization and production on CNC machines.Model for 3D printing.Size of model in mm: 32x57x3 mmAvailable formats are .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.Download 3D model an Celtic cross .obj, .stl, by VitAnGen
-
Starlight Xpress Filter Ring 36mm 3D Print Model
Summary
You can use it with the Starlight Xpress filter wheel inset for Ø 36 mm unmounted filters. It reduces reflexions.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.05 -
Wall Shelf support 3D Print Model
Summary
This is a shelf support in several sizes for actual use.
Because FDM 3D prints are (much) weaker in the Z-axis, the design was made to be printed horizontally. For this reason the diagonal brace has only the thickness necessary to be an effective support without interfering when mounting the support.
Print with a decent infill and shells this is actually quite strong.
Please use screws with FLAT heads, not the conical ones that are used for wood.
Conical screw tend to split the prints apart.
Screws to be uses are of the 4 mm variety with a 8 mm screw head.
Print Settings
Printer:
Mankati, Creatbot Rafts:
No Supports:
No Resolution:
0.15 Infill:
30%-90% Notes:
Print this in PLA, ABS, PETG or any other strong material.
Do NOT use materials like woodfill, bronzefill or similar materials if you need the parts to be strong. -
Royal Standard de Liege 3D Print Model
Summary
Le logo du Standard de Liège retravaillé sur Cinema 4D pour avoir une face arrondie et une autre face de maintien 🙂
Designed for Manon :* -
Creality Ender-2 Z-axis stabilizer mount v2 3D Print Model
Summary
New version.
This is a Z-axis leadscrew stabilizer for Creality Ender-2.
Print, drill out the main hole with a 8-9mm drill bit, it might be a good idea to use some grease as well when installing it. Before you tighten the screws, move the Z axis to the top to position the stabilizer correctly.
Print Settings
Printer:
Ender-2 Rafts:
No Supports:
No Resolution:
.15 Infill:
100% Notes:
Use either 100% infill or lower infill and thick walls, I used 25% infill and 1.6mm walls -
Entry Plug (Evangelion) 3D Print Model
Summary
I redesigned my old entry plug and added a lot of the missing features and text the old one was lacking. This one should also print much better. My printer is currently out of order, so I can’t print it, but when I do I will post pictures. -
Speakon flange bracket (double) 3D Print Model
Summary
I needed to move my amp rack back a couple feet but the cables weren’t long enough, my solution was to move my speakon connectors from the back of the rack to the front as the individual speaker leads were easier to lengthen than the 8 conductor speakon cable.
The bracket was made in tinkercad in less than ten minutes but the printing took four hours.
It fits the 8 conductor speakon flanged outlet nicely.
The sound system was featured in this article, https://kioskfan.wordpress.com/2013/08/26/designing-a-crossover-exposes-more-faults-than-solutions/
Print Settings
Printer:
DMS DP5 Rafts:
No Supports:
No Infill:
22% Notes:
Cheap PLA, it’s just a bracket. -
Pottery Wheel Parts 3D Print Model
Summary
These are pottery wheel parts. If you a DIY type of guy, check out the video for additional parts and “how to” make the entire pottery wheel.
Parts List:
608zz skateboard bearings:https://www.amazon.com/Skateboard-Bearings-Double-Shielded-Silver/dp/B002BBGTK6/ref=sr_1_1?ie=UTF8&qid=1503715409&sr=8-1&keywords=608zz+skateboard+bearings
12v Power Supply:https://www.amazon.com/dp/B009ZZY28M/ref=sxbs_sxwds-stvp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3171424582&pd_rd_wg=KsTjz&pf_rd_r=FJH1Z8RP89RMPC2E4V4H&pf_rd_s=desktop-sx-bottom-slot&pf_rd_t=301&pd_rd_i=B009ZZY28M&pd_rd_w=S2aVT&pf_rd_i=12v+power+supply&pd_rd_r=ANXS2D9KED3Z223VQXK0&ie=UTF8&qid=1503715560&sr=1
The motor I found in a old printer. Here it is on ebay to give you an idea of what I took it out of:http://www.ebay.com/itm/C9029-60027-HP-Motor-OfficeJet-Pro-8500-Deskjet-9800-Range-/370638757036
Diode:
Found one in scrap electronicsCustom Section
-
EFX racer cowl 3D Print Model
Summary
I crash my EFX racer a lot and broke the plastic prop spinner.
Rather than make or buy another spinner, i made a cowl extension.
There is a good gap for motor cooling, but its not so big as to create heaps of drag.
There is tape on mine because the glue is still drying.
Print Settings
Printer:
Malyan M150 Rafts:
Doesn’t Matter Resolution:
0.2mm Infill:
100% Notes:
Needs support around the bottom, for the lip. -
Spider-Man Mask 3D Model
Spider-Man is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Steve Ditko, and first appeared in the anthology comic book Amazing Fantasy #15 (August 1962) in the Silver Age of Comic Books. Lee and Ditko conceived the character as an orphan being raised by his Aunt May and Uncle Ben in New York City after his parents Richard and Mary Parker were killed in a plane crash, and as a teenager, having to deal with the normal struggles of adolescence in addition to those of a costumed crime-fighter. Spider-Man’s creators gave him super strength and agility, the ability to cling to most surfaces, shoot spider-webs using wrist-mounted devices of his own invention, which he calls “web-shooters”, and react to danger quickly with his “spider-sense”, enabling him to combat his foes.Formats of the model: OBJ,STL,3Ds,FBX.
-
Digital Complete Dentures 3D Print Model
Digital Full Dentures
3Shape & KeyShothttps://www.youtube.com/watch?v=ZyzmojMMLLQ -
Star Wars – Stencil – Darth Vader 3D Print Model
http://horizonlab.co/2017/08/25/star-wars-stencil-darth-vader/
-
Private property – Sign – 3D Print Model
Panel size 10x15cm “Private property” that you can print in red with a white handwriting.
Simply change the filament when the letters are printed. -
Anchor 3D Model
3D model is an anchor for visualization and production on CNC machines.Model for 3D printing.Size of model in mm: 30x37x1.6Available formats are .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.Download 3D model an anchor .obj, .stl, by VitAnGen
-
VW Tiguan air vent bar 3D Print Model
Summary
This is a common problem where the air vent bar breaks when a phone support is used on air vent ant the bar breaks.
I used 50% in fill to give it added strength and ABS to print.
Print Settings
Printer:
13 Mega anycubic Rafts:
No Supports:
No Resolution:
0.1mm Infill:
50% Notes:
This is a common problem where the air vent bar breaks when a phone support is used on air vent ant the bar breaks.
I used 50% in fill to give it added strength and ABS to print.Overview and Background
Due to my sons vent bar breaking, he designed replacement.
I printed it
Lesson Plan and Activity
Materials
ABS, 50% in fill for strength. -
26mm Reach-Around Fan Duct Adjusted for Volcano 3D Print Model
Summary
Remix (a rather janky one) of the 26mm Reach-Around Fan Duct from https://www.thingiverse.com/thing:2192480 to extend the ducts down 10mm for a volcano hotend. -
Coup Box Insert 3D Print Model
Summary
This is a one piece box insert for the Coup card game. It fits easily in the box and does not fall out when tipped. Overall dimensions are 143 x 102 x 29 mm.
The design was made from scratch using Sketchup but was heavily influenced by borderjs’s two piece design. Thanks for the great idea!
The original source file is included if you want to tinker with it.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
No Resolution:
.25 Infill:
20 Notes:
Support is not needed if printed flat. Infill and resolution are up to you.
How I Designed This
SketchUp -
Cuadro abstracto – Herramientas de Pintura 3D Print Model
Summary
The instructions in the video are in Spanish, but if you go to the min 1:15 the audio stops and the steps are self-explanatory.
Espero que les guste este proyecto de arte que hice con mi impresora 3D. Todas las herramientas que necesitan las pueden encontrar aquí.Si te gusta el video considera suscribirte a mi canal de YouTube. Es gratis y cada semana tengo un par de proyectos. Muchas gracias por ver el video y Saludoshttps://youtu.be/hNcxmoSv2QU
-
Arduino UNO Spring Case 3D Print Model
Summary
This is a protective cover I made for my Arduino UNO. The springs allow it to stretch around the board and stay in place.
Enjoy! -
Ninjago Mask 3D Print Model
Summary
This is the Ninjago mask at original minifigure scale. This WILL work for a jumbo minifigure, but will require scaling to 410% if you plan on removing it from the blank_head. -
Monoprice Ultimate Cooling Duct 3D Print Model
Summary
Works with the Monoprice Ultimate and Duplicator 6 stock fan.
I decided to take a different approach to cooling…..I actually removed the shroud entirely! The problem with using typical style ducts in the first place is that no matter how open you make it, there’s always backdraft on your fan blades, meaning the pressure finds the path of the least resistance, and while one of those paths is your duct hole(s), some of them aren’t Using any style duct, if you feel behind the fan blades, you can feel this backdraft. -
sim racing ssequential shifter upgrade 3D Print Model
Summary
sim racing DIY build . 3d prints to upgrade the sequential shifter -
Betyár – Hungaryball 3D Print Model
Say hi to Betyár, the second Hungaryball in my countryball series. Betyárs who were usually very skilled horsemen were the outlaws and highwaymen of the 18th and 19th century Hungary. Several of them have become legendary figures who in the public mind fought for social justice. Their curly mustache and typical hat are still an important part of the Hungarian folklore.
-
audiotape 3D Print Model
Hey i came back with another audio tape i change the “hole” by a tiny one on the top of the audio tape. Maybe you’re able to find it, and place string, or anything else … for your keys!
-
Customizable Retro Lightbox 3D Print Model
This is a customizable 3D model, where you can print your own retro lightbox. These boxes normally costs >20 bucks, a printed one costs me about 5 dollar.
-
Single Homebrew Bottle Dryer 3D Print Model
I`ve had some complaints from home that i leave my homebrew bottles standing on the counter for to long.
-
Plate 3D Print Model
Summary
I found that my rubber bands were failing (cause they were old) on the sharp edge of the plate, so I have added a fillet around the curve to remove the sharp edges -
Arabian Pepper Shaker – Male 3D Print Model
Summary
Scanned with the MakerBot Digitizer Desktop 3D Scanner -
Model 3D Printer to simplify3d. 3D Print Model
Summary
Print Settings
Printer Brand:
Deltaprintr Printer:
Deltaprintr Kit Rafts:
No Supports:
No Notes:
Model 3D Printer to simplify3d. -
Post cap 2″x2″ 3D Print Model
Summary
Post cap to push into an 2″x2″ (50mm x 50mm) square tube that’s an upright on my boat lift. -
Four figures of baby Groot 3D Model
Groot (/ɡruːt/) is a fictional superhero appearing in American comic books published by Marvel Comics. Created by Stan Lee, Jack Kirby, Larry Lieber, and Dick Ayers, the character first appeared in Tales to Astonish #13 (November 1960). An extraterrestrial, sentient tree-like creature, the original Groot first appeared as an invader that intended to capture humans for experimentation.The character was reintroduced as a heroic, noble being in 2006, and appeared in the crossover comic book storyline “Annihilation: Conquest”. Groot went on to star in its spin-off series, Guardians of the Galaxy, joining the team of the same name. Groot has been featured in a variety of associated Marvel merchandise, including animated television series, toys, and trading cards. Vin Diesel voices Groot in the 2014 film Guardians of the Galaxy and its 2017 sequel, Guardians of the Galaxy Vol. 2, and Krystian Godlewski plays the character via performance capture in the first film. Since his film premiere and animated series debut, Groot has become a pop culture icon, with his repeated line “I am Groot” becoming an internet meme.Formats of the model: OBJ,STL,3Ds,FBX.
-
Statue of Liberty 3D Model
America’s Most Wanted 3D ModelFunny and Happy Naked Statue of Liberty…Enjoy & Happy printing…
-
Digital Dental Dayguard Splint 3D Print Model
Digital Dental Dayguard Splint
3Shape Appliance Designer & KeyShot Pro -
Fairy for children’s room 3D Print Model
From a drawing, here is a pretty fairy who will take care of your child’s sleep.
-
Tool for cleaning a bicycle cassette 3D Print Model
I am a happy owner of a 29 “bike in monoplateau (11-speed rear derailleur), a Camber from Specialized (this bike is a killer)
-
Launchpad Mini box 3D Print Model
Summary
I needed a box for my midi controller but couldn’t find any. Thought i sholud upload it incase anyone else needs one. Made with fusion 360. -
Fighter Pilot Helmet 3D Print Model
Summary
Hi Andre, not the best model I’m afraid, but that was all I have on file. Hope it works for you.
And as always check the sizing suits your needs.
There is one here if you get it? I’d be happy to help with any conversion of the file if necessaryhttps://www.3dcadbrowser.com/download.aspx?3dmodel=32722
Cheers Jace -
zombie victim bookmark 3D Print Model
Summary
I don’t have to be faster than the Zombies. I just have to be faster than YOU! -
Monoprice (slight remix) Maker Select V2 Rear Cable Conduit 3D Print Model
Summary
This is the same as the version posted by inches, but I added a small name plate and changed the Wanhao lettering to the Monoprice logo on the cover plate. the base is exactly the same file, i just added it here so people wouldn’t have to pull from both thing files. Now those of us with the monoprice clone can accessorize in style. -
Hyperlite Floss v1.5 Top Plate for top battery mount(fits Floss V1 frame) 3D Print Model
Summary
This is a retrofit top plate to allow for topmount battery on the Floss V1 frame. It also allows for the use of many more flight controllers because it removes the center post in the rear.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.10 -
Bed Shelf 3D Print Model
Shelf of tubular superposed bed of 20 in diameter.
we move it as we like, fix a lamp etc ….
#DAGOCULTS -
Drive Pulley 3D Print Model
Drive pulley 100 * 100 mm.
Created from a few geometric shapes.
Can be used as a component of a construction project.
I can create the shaft that goes with it and a sprocket. -
Supporto testina per macchina taglio laser 2 assi 3D Print Model
Summary
I supporti permettono di cambiare rapidamente il modulo laser della macchina per taglio/incisione laser.
Print Settings
Printer:
ANET A8 Rafts:
No Supports:
No Resolution:
1.5 Infill:
100%
Post-Printing -
Extruder Filament Feed Calibration Ruler 3D Print Model
Summary
A ruler designed to mark the filament at 15 cm before feeding and reading off the actual length fed afterwards.
The filament snaps into the bottom and top of the ruler and fits into the grove to make reading off the length easier.
The length of the ruler is 15 cm with a ledge at the top that can be used as a guide for a sharp razor mark or marker line.
The markings on the ruler are in mm of actual fed filament to be read off where the mark lines up after feeding 10 cm of filament through the extruder.
Print Settings
Printer:
TEVO Little Monster Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm layer height Infill:
30%, not critical Notes:
I printed mine with ABS but see no reason why this would not work in PLA.
Print settings
0.2 mm layer height
30% infill, not critical
no support, already included in the model
raft does not matter
Post-Printing
You need to clip off the tiny support holding the end of the clamp at the bottom of the ruler.
How I Designed This
After realizing that the extruder feed accuracy needs to be tested for new filaments I decided to make a ruler designed for the task that allows easy marking and measuring of the extruder filament feed length and does not require three hands to hold the filament in place.
I am new to 3D printing and find Fusion 360 to be the easiest to use when taking an idea to a working model.
I use parameterized dimensions to allow easy tweaking and reducing the model size for faster test prints.Custom Section
Marking 15 cm before filament feed
Snap the filament into the top and bottom clamps of the ruler and press into the grove along the scale.
With the bottom of the ruler resting on the extruder intake mark off 15 cm using the top of the ruler as a guide. Only the bottom of the mark is relevant so don’t worry about how thin it is.
Reading actual feed length
After feeding 10 cm of the filament with:
G92 E0; reset extruder origin
G1 E100 F120; feed 10 cm of filament at 120 mm/min (adjust this to your usual feed rate
G92 E0; reset extruder origin
Read off the actual length from the bottom of the mark aligning with scale printed on the ruler. Numbers are in mm of actual feed. In the image, I adjusted my extruder steps/mm to compensate for always underfeeding by 5mm on 100mm feed so it is showing 100mm. -
Liquid Cooling Water Block 3D Print Model
Summary
A simple direct-contact water block, with 1/4″ hose barbs, originally designed for “60w” thermoelectric coolers.
This device puts the water in direct contact with the object to be cooled, so don’t use it for CPUs or really anything valuable.
Requires a seal – I designed the gland to fit a 218 silicone O-ring (McMaster-Carr #1283N91); it seals really well that way. However, you could just cut a seal out of neoprene or something, or use gasket maker to seal it up.
FreeCAD design’s included.
Print Settings
Printer:
RepRap I3 Rafts:
No Supports:
No Resolution:
0.3mm is fine. Infill:
100% for a good seal. Notes:
Flip it upside down for printing. Should be printed totally solid, otherwise it might leak. -
Drawing and multiplication rule Multiplitrace 3D Print Model
On a ring, several rules for drawing patterns are proposed with on each of them a multiplication table from 1 to 10. Playful and educational, this tool will allow your child to retain his multiplication tables while having fun !
-
Digital Dental B Splints 3D Print Model
Digital Dental Rendered “B” Splints
3Shape Appliance Designer & KeyShot Pro -
Zombie Digging Out 3D Print Model
My little zombie climbing out to play,
I printed this with a Mbot sure could use a
#DAGOCULTS -
Tooth Brush, Toothbrush, Toothbrush holder 3D Print Model
#DAGOCULTS
Toothbrush holders, children always close and fun to brush teeth, all neat. Toothbrush holder. Glass toothbrush
-
Cube 3 Printer Wiper Blade 3D Print Model
Summary
This is a replacement piece for the wiper blade on Cube 3 Printers. It’s currently untested, but matches the measurements posted to the forum previously. It will work congruently with the assembly that I’ll post in the next few days. -
Keter Table Storage Bin 3D Print Model
Summary
Bought a few Keter folding tables and wanted some storage bins for 3D printing finishing tools.
Enjoy!
Print Settings
Printer Brand:
LulzBot Printer:
Mini Rafts:
No Supports:
No -
Fighter pilot 3D Print Model
Summary
not my design i just like it and made it printable…it prints great! -
Kawasaki Ninja 300 Mirror Block Off Plate 3D Print Model
Summary
I’m turning my ninja 300 into a race bike, so I no longer needed mirrors, so I used this part to replace the bracket holding them on. -
愛心雅/LOVE FOR YA 3D Print Model
Summary
如果經過挪威森林的第五道門
輕輕敲門讓裡面的人知道你來了
如果沒有回應就不要打擾了
在門外溫柔守候吧 –火星爺爺
當你無法擁有的時候
唯一能做的是不要忘記 -
Customizable Sanding Stick 3D Print Model
I’ve created this OpenSCAD, where you can customize your sanding stick. Even the needed screws are printable. You only need some sandpaper (sheet or strip) and the 4 printed parts.
-
Rollei QAL-40 Camera Mounting Plate (C4i, C5i, C40i, C50i, Compact Traveler No 1, Compact Traveler No 10, CT-4A, CT-5A, CT-5C, M5 Mini, PGA-584, PGA-484, TT-1, T2S) 3D Print Model
I needed another mounting plate for my Rollei Compact Traveler No. 1 tripod and measured the dimensions and hacked it into Fusion360. The Model also includes the 1/4″ thread for the camera mounting screw.
-
VITABRI Tent Spare Parts 3D Print Model
Hello,
Here is the STL model of a corner piece of VITABRI 3×4.5 folding tents.
The part has been tested (see photo). It is to my knowledge unsold and you will find it here only! -
Cache web cam apple 3D Print Model
Webcam cover for iMac apple to print and heat with a lighter to twist the rear tab.
-
Helmet-3 Rys-T PUBG Keyring Pendant 3D Print Model
Hey Winner! Are you ready for some Chicken Dinner?
I’m a big fan of PUBG. It was so fun to make this Helmet for 3D printing! Enjoy your Chicken!
Separated version and One Piece version are included.
Length: 54.62mm (2.15 in) -
Bacchus or satyre 3D Print Model
Summary
Bacchus or satyre, roman copy 2nd century CE from a greek original, Rome (?), marble. Musée du Cinquentenaire (Brussels, Belgium). Made with ReCap and ReMake from Autodesk.
Young man wearing a panther clothe on his back, the head of the panther on his chest. The baseboard and the foot are modern.
For more updates, please follow @GeoffreyMarchal on Twitter. -
Twinbird filter 3D Print Model
Summary
TC-5111http://www.twinbird.jp/products/tc5111.html
http://shu-fan.blogspot.com/2017/08/3d-twinbird.html -
Big Collection Of Random Band Logos 3D Print Model
Summary
This time it’s random band logos. I included the .SVG files I used to create the .STL files with. As always feel free to use this in anyway you please and if you come up with a great design please take all the credit. Just doing this to pass the time. -
Cleaner Bottle Holder 3D Print Model
Summary
Printed a quick holder for the spray and Shine, Used this to stop bottles from rolling around in trunk while driving to car shows. The bottles are 80 mm in Diameter.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
.2 layer height, .4mm nozzle Infill:
20% Notes:
Printed ABS, bed temp 80c 220c print temp.
.Stl and .Skp files attached if you want to change dimensions.
