A beautiful octahedron planter following the sacred geometry lines.(Very) Suitable for succulent plants and cacti, for home or office decor.Does not have drainage holes.*the planter presented in the images is sanded and painted3D PRINTING SETTINGSPLA printing recommended settings:layer height 0.2 mmextruder temperature 180 Cbed temperature 50 Cspeed 3600mm/min.infill 0%
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
PRISMA PLANTER 3D Model
A triangular prism great for display of succulents or cacti.It looks even better in a set of 3 planters.Does not have drainage holes.*the planter presented in the images is sanded and painted3D PRINTING SETTINGSPLA printing recommended settings:layer height 0.2 mmextruder temperature 180 Cbed temperature 50 Cspeed 3600mm/min.infill 15%
-
SPIRAL PATTERN LAMPSHADE 3D Model
Beautiful spiral patterns lampshade inspired by formaliz3d designs.Perfectly suitable for a standard E27 lightbulb (110mm height x 60mm wide).Works with most sockets.Can be printed in both ABS and PLA (that’s what we printed with). Check the images for the correct print position.The top screw is a M9 or a M10, depending on your needsYou can print it in any filament color and spray paint it afterwards (that’s what we did, anyway)Check the attached image for dimensions. If you need a different size to fit the light socket or the bulb, just drop a message or post a comment.3D PRINTING SETTINGSThe zip file has 5 stl files:M9_screw.stl / M10_screw.stl.1 mm layer height30% infillno support0.586/0.637 meters of filament ~ 1.76g/1.91gabout 1h 30 minutes @ 3000mm/ssocket_top_cover.stl.2 layer height30% infillno support1 meter of filament ~ 3.07gabout 20 minutes @ 3000mm/slamp_shade_top.stl.3mm layer heightno infillno support3.131 meters of filament ~ 9.42gabout 1h 20 minutes @ 3000mm/slamp_shade_bottom.stl.3mm layer heightno infillno support12 meters of filament ~ 36.21gabout 4h 25 minutes @ 3000mm/s
-
SFERA PLANTER 3D Model
A spherical planter suitable for succulent plants and cacti, for home or office decor.Does not have drainage holes.*the planter presented in the images is sanded and painted3D PRINTING SETTINGSPLA printing recommended settings:layer height 0.2 mmextruder temperature 180 Cbed temperature 50 Cspeed 3600mm/min.infill 15%
-
Desktop Pen/Pencil Organizer 3D Print Model
Summary
This pen/pencil organizer contains 11 compartments, each with various lengths for easy accessibility. The dimensions are as follows:
L x B x H
130mm x 130mm x 105mm
Feedback is highly appreciated, so please let me know how it works! -
IET Band Holder 3D Print Model
Summary
On the off chance that there’s anyone on Thingiverse that is a 3D Printing AND magic enthusiast like me I decided to upload this. It is a holder and case for IET Bands or loops. If you know how to tie them, now you have a holder for them.
More pictures coming soon. Once I’m done printing.
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
100 Microns Infill:
Doesn’t Matter Notes:
Printed at 100 microns in order to make it as smooth as possible. Printed at 25 microns on a resin printer might be best. Also haven’t tried it yet but printing in ABS and then Acetone Vapor smoothing could possibly match a resin print. -
Newspaper Holder 3D Print Model
Summary
Just a small holder to hang a standard coat-hanger with a newspaper.
Printed with PLA with 20% infill and with support (maybe it works without it, too, though).
Let me know, if you like it 🙂 -
test your printer 3D Print Model
Summary
Test your printer. This is a smaller print that includes 10 things that are hard for printers to print.Overhangs (60, 45, and 30 degrees)
Horizontal holes (.5 and .2 inches)
Thin walls ( .15, .1, and .05 inches)
Shooting a gap. (.25, .5, .75, and 1 inch)
`Vertical holes. ( .2, .15, .1, and .05 inches)
A tall cone
Horizontal overhang (circle)
Horizontal overhang (square with a point)
Underneath the print there is a square indent
Underneath the print there is also a circle indent.
Hope you enjoy
Comment how your printer did. 🙂 -
Mountain Goat Stl 3D Model
Mountain goat STL 3D print modelMountain goat STL. Five shells. Height 150mm. Hollowed model included. Wall thickness 3mm.
-
Mountain Goat On The Stone Stl 3D Model
Mountain goat on the stone stl 3D print modelStl of mountain goat. Height 150mm. Model hollowed. Wall thickness 3mm
-
Camera mic holder 3D Print Model
It’s a microphone holder for DSLRs and other cameras. The microphone holder is attached via the HOT SHOE connector, which is usually located on the top.
-
Camera mic holder 3D Print Model
It’s a microphone holder for DSLRs and other cameras. The microphone holder is attached via the HOT SHOE connector, which is usually located on the top.
-
Reliance jio 3D Print Model
The next bigger step initiated by RIL is Jio Phone with free voice calls throughout the life, with 4G data that too at a very nominal rate. This phone will be the priority of the upcoming generation.
-
Pretty heart 3D Print Model
That’s a pretty heart!
Composed entirely in PLA (at least my creation), this book will allow you to offer your loved one an original gift.
Customizable, you can print it with the material of your choice, in short, add your papatte! -
i3 Mega Tool Caddy 3D Print Model
Summary
I Noticed there are no tool holders for i3.
Here is my first attempt at one. Fits the right side of the i3 mega.
Fits most tools that come with the i3 Mega except the Spatula.
Will fit the left hand side if you mirror the image in cura
Printed on its front down with no supports.
Print Settings
Printer:
Anycubic i3 Mega Rafts:
No Supports:
No Resolution:
.3 Infill:
100 Notes:
printed on its side down with no supports.
How I Designed This
Used tinkercad -
Horse Stable with Swinging Gate 3D Print Model
Summary
This is a horse stable with a functional swinging gate. The completed stable consists of seven pieces. You need to print two roofs and two sides, the back, the support for the gate, the gate and the detailed wooden floor. The gate is tight in the support to allow easy movement, but it is tight enough to remain where you place it. You may need to clean the holes out of the gate support depending on the accuracy of your printer. It is purposely made a little tight.
Only the gate needs to be printed with supports. You superglue all the parts together to finish the project. The floor has very detailed wood slats that could also be used for other building or just for a tile as well. Textured roof as well as detailed in the wood sides and back.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Supports:
Yes Resolution:
0.15 Infill:
15% Notes:
Only the gate needs to be printed with supports. -
PolaroidCube Alien5″ Mount 3D Print Model
Summary
A mount to attach the Polaroid cube to a alien 5″ frame.
-Use 3M 6mm screws to hold top on.
-Use plate support for bottom piece. -
Rick Turbo Fan Shroud 3D Print Model
Summary
Rick face fan cover. Enjoy!
Print Settings
Rafts:
No Supports:
Yes Resolution:
.1 Infill:
100
Post-Printing -
Teepee Lashing for 3/4″ PVC 3D Print Model
Summary
Easy to assemble, no Eagle Scout skills (tripod lashings) required.
Not included: 3/4″ PVC pipe, 8 ft long, 9 pieces; Canvas or bedsheet.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.3mm Infill:
10%+ Notes:
The 3_Hole version can be printed in the default orientation for strong adhesion to the build plate, or upside down if you don’t need much adhesion. -
Anycubic Kossel Delta Plus fan housing 3D Model
fan housing fits my mainboard mod and uses a standard 40mm 12v fan which will plug into spare socket on main board
-
ElementalRC Pyro Top Plate 3D Print Model
Summary
made better
4mm
tie wrap mount for D4R/X4R
fixed the XT60 pass-through to not require that stupid screw thing
increased camera clearance in the front
targa center section to facilitate bottom-mount battery with upright VTX whip -
Handlebar Watch Mount 3D Print Model
Summary
When I bought my royal Enfield Continental GT, there wasn’t any clock and the previous owner left a GPS mount so I designed this bracket to mount a cheap handlebar watch.
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0,2 Infill:
100% -
Moto G4 Plus Tactical Cover 3D Print Model
Summary
This is a Moto G4 Plus smartphone tactical cover for mount in a molle system. I did not test yet on field, its a work in progress and can have final modifications. I plan to use it while playing paintball for video recording or use tactical game android application. -
Mountain Bike MTB Mudguard (Specialized) 3D Print Model
Summary
There are plenty of sketches online to make your own MTB mudguard. But why go to all the trouble of tracing, cutting, and punching holes?
This model is designed to be printed at 0.28mm (or 0.3mm) and is exactly 3 layers thick which provides strength while still remaining flexible.
There are versions with and without the Specialized logo. I recommend color changes for the last logo layer.
Print Settings
Printer:
Monoprice Maker Select V2.1 Rafts:
No Supports:
No Resolution:
0.28mm Infill:
100% -
Door Lock 3D Print Model
Summary
This is a “chamber of secret” door’s lock. I designed it to match the snake door handle I had already printed.
I bought a lock door system from the store, painted the button and removed the metal ring to replace it with this customized one.
It’s my Slytherin door, on a bigger Harry Potter’s room project 🙂
Print Settings
Printer:
DAGOMA DiscoEasy 200 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.1 Notes:
I made a pause to change color
Post-PrintingHow I Designed This
Wanted to match the real Chamber of Secret logo, but on such a small device, it wasn’t really nice. So I made a simplified version but still efficient 🙂 -
Rick and Morty assortment of Mr. Meeseeks 3D Print Model
Here are several versions of Mr. Meeseeks from Rick and Morty show!
-
Adjustment slide for festool Domino 3D Print Model
ENGLISH: a selection slide printed with my prusa MK2 for the festool domino.
-
GoPro Mount for Longboard 3D Print Model
Summary
Original design was by SteveMachine. I just made his a bit slimmer and filleted some edges to make it look less bocky. -
Minimal K40 Exhaust Adapter 3D Print Model
Summary
Another K40 Laser Cutter exhaust adapter for 3″ hose. In this case designed to be minimal. A one piece version and a two piece version is available. If you are printing on a 3D Printer with a small build area the split version may be better. The yellow one in the picture was printed on an UP! Mini at 100% infill. I cutout a gasket to put behind it on my machine to help with the seal. Also provided is the Rhino 3DM files to make it a little easier if someone else wants to make improvements. -
BB Ball Bearing 3D Print Model
Summary
this is a bb ball bearing you use bb you but in 8 bb or more and oil it -
LCD TV Support for Oculus Rift SENSORS (CV1) 3D Print Model
Summary
A support for placing your Oculus Rift CV1 sensors on the top of a LCD TV.
PLEASE NOTICE: I designed for my LCD TV, which widht is 1,5cm.
But you can rescale it for any LCD TV: just measure your TV width, and change scale for the Z AXIS accordingly.
But only rescale the Z axis, don’t mess with the others! If you do a uniform scale, the Rift sensors won’t fit anymore…
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Infill:
100% -
Emblem toyota aygo 2 in emblem transformers (autobots) 3D Print Model
Change the emblem of its toyota aygo 2 (from 2015) by that of the autobots of transformers, the hooks are ideally placed, the original one is removed by placing a blade of knives just behind!
nothing prevents you to modify it with a simple software like 3D build of windows 10!
at least you have the oval and hook tightly placed! -
AA battery dispenser for ikéa GRUNDTAL 3D Print Model
This distributor is simply attached to the GRUNDTAL bar
-
Anycubic i3 Mega Spool Stand Filament Guide 3D Print Model
Summary
Quite often, when I moved the printer around, filament would come spiraling off the spool. This helps keep it on the spool. -
Fuse Holder for standard car fuses 3D Print Model
Summary
It’s a remix, because I used the measurements for the fuses from the original. This one is more compact, has no cover, but higher walls. -
ZuckerBehälter 3D Print Model
Summary
Gibt nicht viel zu zu schreiben.
Einfacher Zucker Behälter mit Beschriftung auf dem Deckel. -
Ring style 3D Model
The ring size is 5.5(USA)All information about this ring is mention on the pictures
-
Cups 3D Model
Представляю Вам, 4 кубка.Все модели созданы для 3д печати.Вы их можете распечатать на 3д принтере и вручить победителю.Модели STL и Blend
-
N-Scale Small House (1:160) Model Kit 3D Print Model
This House was designed for N scale but could be used for Z scale and HO just scale accordingly and be aware details may seem exaggerated in HO and details may not appear in Z scale.
-
Desktop Hot Air Balloon with Heart 3D Print Model
This is an ultra-compact hot air balloon: it is only 10 cm tall, but has all the parts I can think of.
If you have a laser sintering type printer wherein no support structure is needed, you can print the whole body using “Whole body.stl.” Otherwise, you can enjoy the labor of printing each of the five stl files and putting together — just as I did.
I will share the photographs of my print soon. -
Digital Morning Re-positioning Deprogrammer 3D Print Model
Digital Morning Re-positioning Deprogrammer
3Shape Appliance Designer 2017 & KeyShot Pro -
Hummingbird Feeder Platform 3D Print Model
Summary
I made a holder and platform for my father’s hummingbird feeder!
-
Keychain Make ART Not WAR 3D Print Model
Summary
Layer Ligth0: 0.15
Shell Thickness: 0.8
Bottom/Top thinckness: 0.2
Fill Density: 25
Filamento: PLA 1.75mm
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.15 Infill:
0.25Standards
NGSS
Overview and Background
Lesson Plan and Activity
consejos
Esto es un forma de dar contra del rasismo, guerra e indiferencias existentes en nuestro entorno.
Materials Needed
FILAMENTO
PLA 1.75 -
Merle’s Extreme Teen Bible Cover – The Adventure Zone 3D Print Model
Summary
Made a resizeable book cover that you can print and put on top of a book. Thus converting that book into Merle’s Extreme Teen Bible! -
Cheeky Fox Head 3D Print Model
Summary
First thinger I made in ZBrush. Smirky critter. Came out ok. Not sure what else to say :d Could go over it and fix a few lil things but~
Also print it flat not like in the preview here. Idk why it ended up like that
No stealsies/remakes! Just print it and have a fox head thnx 😀 -
Flower 3D Print Model
Summary
The piranha flowers in the Mario brothers games.
Let me know if you like this kind of thing.
Visit my patreon page athttps://www.patreon.com/leobb -
Terminator 3D Model
The Terminator is a 1984 American science-fiction action film directed by James Cameron. It stars Arnold Schwarzenegger as the Terminator, a cyborg assassin sent back in time from 2029 to 1984 to kill Sarah Connor (Linda Hamilton), whose son will one day become a savior against machines in a post-apocalyptic future. Michael Biehn plays Kyle Reese, a soldier from the future sent back in time to protect Connor. The screenplay is credited to Cameron, along with producer Gale Anne Hurd. Executive producers John Daly and Derek Gibson of Hemdale Film Corporation were instrumental in the film’s financing and production.The Terminator topped the US box office for two weeks and helped launch Cameron’s film career and solidify Schwarzenegger’s. It received critical acclaim, with many praising its pacing, action scenes and Schwarzenegger’s performance. Its success led to a franchise consisting of four sequels (Terminator 2: Judgment Day, Terminator 3: Rise of the Machines, Terminator Salvation and Terminator Genisys), a television series, comic books, novels and video games. In 2008, The Terminator was selected by the Library of Congress for preservation in the National Film Registry, being deemed “culturally, historically, or aesthetically significant”.Formats of the model: OBJ,STL,3Ds,FBX.
-
Deathstroke Helmet 3D Model
Deathstroke (Slade Joseph Wilson) is a fictional supervillain appearing in American comic books published by DC Comics. The character was created by Marv Wolfman and George Pérez. He is a mercenary and assassin who first appeared in The New Teen Titans (vol. 1) #2 (1980). Wizard magazine rated him the 24th greatest villain of all time.Originally the archenemy of the Teen Titans, writers have developed him over the years as an adversary of other heroes in the DC Universe; parallels have been established between him and Batman. The character has been substantially adapted from the comics into multiple forms of media, including several Batman related projects and the Teen Titans animated series. Slade Wilson/Deathstroke later appeared on The CW’s live-action TV series Arrow, where he is portrayed by Manu Bennett. Joe Manganiello has been cast as the character for the DC Extended Universe.Formats of the model: OBJ,STL,3Ds,FBX.
-
Digital Artist MW 3D Print Model
This is the quality of my company’s 3D Photo Scan System.0.01 seconds of instantaneous shooting.
-
REGAN THE EXORCIST 3D Model
The bust of Regan, central figure of the movie THE EXORCIST, interpreted by Linda Blair.I made neither the pupil nor the iris of eyes to be able to paint it with the turned eyes.
-
Filament Sensor and Cover (OEM sensor) 3D Print Model
Summary
Remix version that will work with the sensor that comes with the oem kit.
Print Settings
Printer:
Cr-10 Rafts:
No Supports:
No Resolution:
0.20 Infill:
30 -
Better IncrediVat D7 3D Print Model
Summary
Wanhao Duplicator 7 VAT Standard and XL.
Standard design is a rip off from the official VAT.
Enhanced version is reworked as: Slopped edge, pouring slope, increased capacity.
330ml – Standard.
350ml – Enhanced.
400ml – Standard.
420ml – Enhanced.
You will need the following hardware:
22x M4x12 Metal spacer.
22x M4x10 Countersunk screws.
This is not litterally a remix but since mister Z use big word and think he own the design right on FlexVAT or any VAT that exist, here it is.
This is NOT from his design but to please him, I’ll act like it is. =)
The original model posted here is under license CC BY-NC 3.0 which allow me to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
And “The licensor cannot revoke these freedoms as long as you follow the license terms.”
According to https://creativecommons.org/licenses/by-nc/3.0/
Print Settings
Printer:
Bertha Rafts:
No Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
15 Notes:
Print 1 version of your liking and 1 seal.
Post-Printing
The metal spacer is tight fit but use glue/epoxy then push them in place. -
Additional Z-Axis Stabilizer for Wanhao D7 3D Print Model
Summary
Adds another stabilizing rod to the z-axis on the Wanhao D7. Work in progress. Alignment is not perfect and required a little torch action on base piece to soften PLA to fit! -
Remote control support 3D Print Model
2 different models
1 for remote control 24/47
and 1 for remote control 34/47
Printable without brim, raft or support
PLA 190 ° bed 50 ° -
REGAN 3D Print Model
Bust of Regan Theresa MacNeil interpreted by Linda Blair in 1973 in the film THE EXORCIST by William Friedkin.
-
MBFC from Singapore for 3d print stl 3D Model
MBFC towers from Singapore.It consists of 4 skyscrapers, a building in the middle, 3 arches and stands.There is two options how to print1 option: a skycraper (number 2) with building (number 5) in one model and four other skycrapers separately , 3 arches and a stand.2 option: all five buildings and a stand in one model (print all at once) and 3 arches.A photo:Photo 1 – the whole modelPhoto 2 – a skyscraper (number 1)Photo 3 – a skyscraper (number 2)Photo 4 – a skyscraper (number 3)Photo 5 – a skyscraper (number 4)Photo 6 – a building in the middle (number 5)Photo 7 – three arches (print better in inverted form)Photo 8 – a stand (everything is glued on it)Important: when buying, I will also send instructions on how to collect everything.Important: the model is not a 100% copy. Several elements are missing.
-
Dodge Demon Logo 3D Print Model
Summary
Traced and image, all conic arcs, using Onshape. 5mm Extrude. -
Rosarius of the Adeptus Ministorum 3D Print Model
Summary
All hail the God-Emperor, may his guidance always protect us from the encroachment of the Heretics.
Directed by the Omnissiah to create this symbol of office, I made it needlessly complex by making the gemstone mount removable, in theory meaning that I could replace it with a different gemstone shape, such as a teardrop for Blood Angels, or whatever. It should also make it easier to print/finish/paint in parts, so the gemstone, the gemstone mount, and the badge could all be printed in different ways, and different filaments with any simple printer, then painted as needed with a minimum of masking needed.
I didn’t find an Imperialis (winged skull) that fit my desires, so I made some wings and found a good skull, then squished the skull thinner to make it more jewelry-able. I’ve uploaded the wings in case someone has a need for them.
Print Settings
Printer:
Folger Tech Kossel rev B Supports:
No Resolution:
.05mm Notes:
I’m printing it now, so I’ve not had a chance to test the fit.
I’m printing this thing super thin to reduce the post-processing necessary. I’d go thinner if I thought it would help, but mostly the finest detail is lost just because it’s not being hand carved and molded. Honestly printing the wings as solid blocks and carving them down with a sharp exacto is the only way to do justice. I’m not that handy with a blade, so this is the next best thing.
Maybe in 30 years when we are looking at this design with our monitors 10x the resolution of human sight and using our 0.00001mm resolution 3D printers, this will be a perfect model for a Games Workshop bankruptcy party costume. -
Stand for Kerrigan figure 3D Print Model
Summary
I bade a base platform for Kerrigan. Original one snapped off on me =(
Also, I added threaded post inside for M12 nut for weight.
Just make i little form-work with a hobby-knife on a slot for her toe, slide it in and add some glue 😉
NOTE: The base model is for Kerrigan 60% scaled. So scale it for your needs.
Autodesk Fusion 360 link: http://a360.co/2uTn5Ii -
Dell monitor LED bar 3D Print Model
Summary
This LED mount is for Dell P2414H and 3528 SMD 12V LED
Post-Printing
Print the stand top cover and LED mount and glue them together.
LED 12V hook up to desktop power supply
computer on, LED on. -
Space Shuttle Pen Stand 3D Print Model
A space shuttle pen holder for all science and space lovers. Just print it and take off in your imaginations with your tools.
-
Universal Fidget Spinner to Spinning Top Converter 3D Print Model
Are there too many fidget spinners laying around your house?
Did you print them, buy them or got them as a gift?
Are you bored spinning them in your hand?
Why not convert one or two of them to a regular spinning top? 🙂 -
Pencil holder 3D Print Model
This pen holder was born of a need in our office, having the excessive loss of pens and high expenses in buying more pens so we decided to create it.
-
Mel – Column 2 pose 3D Print Model
3D body scan pose figurine from the Mel series.
1/8th scale, 83k polygons. -
IBARAKEL ANGELE GERALD NOELINE ISAAC CUSTOMIZABLE VASE 3D Print Model
ANGELE GERALD NOELINE ISAAC
Add your text to WWW.IBARAKEL.COM -
Fully Printed Air Rockets 3D Print Model
Summary
I have modified the original compressed air rocket created by Cbonsig to fit onto 3/4″ PVC pipe. It was also modified to fit my Replicator 2 and add a center section allowing for additional rocket length.
I was inspired by the same Make Magazine article (http://makezine.com/projects/make-15/compressed-air-rocket/) but wanted to make an air cannon that was a little more versatile. I replicated the Air Piston Cannon created by NightHawkInLight https://youtu.be/G1VCZEXi384
USE EXTREME CAUTION!!! We fully taped all rockets to prevent individual pieces from flying.
The modified SolidWorks files have been included.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Infill:
100 -
Water Bottle holder 3D Print Model
Summary
I wanted a way to hold my vacuum water bottle for hiking, made this up to clip to my back pack shoulder strap. The photo shows a previous generation, I have rounded over the corners and reduced the hold slightly to make it stronger.
Enjoy. -
Airsoft 3d 3D Print Model
Summary
This’s my homemade airsoft, i spent a lot of time to create this object.
To create this project, you need to dedicate yourself and have creativity, some parts are not made with the printer so you have to create some pieces.
I used 3/4 inch and 1/2 inch pipes, a 6 mm threaded bar, a piece of leather, pen springs, an umbrella spring and a few screws. The barrel is a precision barrel for airsoft.
The sights is in another project of mine here on the thingiverse.
Good look!
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
0.1 Infill:
50% Notes:
Print each part individually. -
CR-10 Raspberry Pi Integration 3D Print Model
Summary
I integrated a raspberry pi inside of the CR-10 electronics case.
Instructions
Cut a 54mm x 20mm hole 11mm from the top and 40mm from the back of the case.
Epoxy pi mount in place. I don’t have measurements of where the mount should be placed as I kind of winged it by attaching the pi to the mount and then placing it where it needed to be.
Epoxy the IO cover to the outside of the case.
Note: The raspberry pi is placed directly over the cable tie mount. The mount will still be usable after installation the wires will just have to be run under the pi.
In addition to the raspberry pi mount there is a mount for a single channel relay and a LM2596 DC-DC adapter with spacers to mount it above the raspberry pi.
Note: If you just want to integrate the raspberry pi and power it with independently the power supply cable can be put through the existing cable grommet.
The pi is powered from the 12V power supply using the LM2596 and using the relay to toggle power to the CR-10 main board. The rear exhaust fan was, replaced with a quieter fan, and rewired to be powered on independently of the main board so that it runs as long as the power supply is switched on. The front fan still powers on with the main board.
I have had this setup install for about 2 weeks now and the printer has been running pretty much non stop since and I have had no issues.
Next time I open the case I will take some pictures of the inside.
Links to parts used.
LM2596:https://www.amazon.com/RioRand-LM2596-Converter-1-23V-30V-1Pcs-LM2596/dp/B008BHAOQO
Single channel relay:https://www.amazon.com/Tolako-Arduino-Indicator-Channel-Official/dp/B00VRUAHLE
Rear fan replacementhttps://www.amazon.com/Noctua-Cooling-Blades-Bearing-NF-A4x10/dp/B009NQLT0M
As for screws: I used the screws that held the old thicker exhaust fan to mount everything as they were the perfect length. To mount the new fan I used some M3x12mm screws that I had around. -
Black Panther Helmet 3D Model
The Black Panther (T’Challa) is a fictional superhero appearing in American comic books published by Marvel Comics. Created by writer-editor Stan Lee and penciller and co-plotter Jack Kirby, he first appeared in Fantastic Four #52 (July 1966).The character was the first black superhero in mainstream American comics, debuting years before such early African-American superheroes as the Falcon (1969), Luke Cage (1972), Green Lantern John Stewart (1971) and Black Lightning (1977). Black Panther is depicted as the king and protector of Wakanda, a fictional African nation. Chadwick Boseman portrays Black Panther in Captain America: Civil War and will reprise the role in Black Panther and Avengers: Infinity War, set in the Marvel Cinematic Universe.Formats of the model: OBJ,STL,3Ds,FBX.
-
The Humble Velocipede 3D Print Model
The Humble Velocipede is a playful desktop toy designed to scuttle over countertops and coffee tables. The design of this toy was inspired by Theo Jansen’s Strandbeest creatures, and combines 3D printing with some custom hardware to put the beauty of Jansen’s walking mechanism in your hands.
-
Digital Ortho Tanner Repositioner Splint 3D Print Model
Digital Tanner Repositioner
3Shape Appliance Designer & KeyShot Pro -
City – multi-storey commercial office building 183 3D Model
Native file format is 3ds Max 2009.format: 3DMax 2009: OBJ: 3DS: FBX9
