3DHunt.co

Category: 3D Print Models

Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.

  • Lucy van Pelt 3D Print Model

    Lucy van Pelt 3D Print Model

    Lucy van Pelt, from the comic strip Peanuts by Charles Schulz.

  • Nano Pi2 UMPC 3D Print Model

    Nano Pi2 UMPC 3D Print Model

    More details about this project on Thingiverse: https://www.thingiverse.com/thing:2514014

  • HULK FROM THOR RAGNARÖK INSPIRITED MODEL FOR 3D PRINT 3D Print Model

    HULK FROM THOR RAGNARÖK INSPIRITED MODEL FOR 3D PRINT 3D Print Model

    HULK FROM THOR RAGNARÖK INSPIRITED MODEL FOR 3D PRINT

  • Raspberry ps2 3D Print Model

    Raspberry ps2 3D Print Model

    box to rapsberry pi 3 model PS2

  • Bugs 3 drone Walkera gimbal mod 3D Print Model

    Bugs 3 drone Walkera gimbal mod 3D Print Model

    Summary
    This simple but effective mod allows you to fit a Walkera G2D gimbal to the stock camera mount fitting beneath the battery.
    Allows for quick and easy fitting and removal of the gimbal.
    I used this clip to secure my Akaso EK700 camera …. https://www.thingiverse.com/thing:1795933
    And this is the landing gear I use ….. https://www.amazon.co.uk/gp/product/B06VV21JYF/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
    I had to drill the screw holes a bit wider in this landing gear as they didn’t quite line up with the Bugs 3.
    First test with the gimbal fitted ….. https://www.youtube.com/watch?v=FKtRV4nx8h4&feature=youtu.be
    Gimbal mount adapter :
    Fix the adapter to the gimbal mounting plate with 2 screws and nuts (see pictures above).
    Gimbal power :
    I used the balance port from the stock battery to power the gimbal.
    Remove the female connector and middle wire from a 2s lipo balance expansion cable and splice it to the cable with the 2 pin female connector that comes with the gimbal.

  • Best of the Week: 8/28/17 3D Print Model

    Best of the Week: 8/28/17 3D Print Model

    Summary
    My collection of the best Things posted for the week of 8/28/17:https://www.thingiverse.com/LoboCNC/collections/best-of-the-week-8-28-17
    This is the second week of my experiment with crowd-sourced curation. I’ve looked at every single Thing posted from 8/28/17 through 9/3/17 and selected what I think are the best Things according the criteria listed below. This posting here is sort of a meta-Thing to help people find this collection. Let me know what you think of this idea in the comments section.
    If you like this concept, please “Like” this Thing to help others find it. You can also “Like” the collection itself. And if you really like this idea, create your own Best of the Week collection. I’ve tagged this with “BOTW” and “Curation” and would encourage others to use the same tags.
    Post-Printing
    My Selection Criteria
    What I look for:
    Things that are unique
    Things that are well executed
    Things that are of general interest
    Things that are well presented
    Things that make me smile
    What I pass over:
    Cover images that are a rendering (i.e.: no photo of a real print)
    Accessories for very specific products (e.g.: for GoPro Hero, Samsung Galaxy 7, etc.)
    Things based on copyrighted material
    3D printer parts (just too many, too specific and too boring)

  • Filament Mount for LACK table 3D Print Model

    Filament Mount for LACK table 3D Print Model

    Summary
    Hy there,
    i have mounted my Printers on IKEA Lack tables and now the Filament can easy Mount on the left or right side of the table.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    10

  • Recurve Bow v2 3D Print Model

    Recurve Bow v2 3D Print Model

    Summary
    I redesigned the limbs for this bow to be a bit more traditional while still accommodating a rubber band. And I added a guard/rest so you don’t get snapped by the band.

  • Lucy van Pelt 3D Print Model

    Lucy van Pelt 3D Print Model

    Summary
    Lucy van Pelt, from the comic strip Peanuts by Charles Schulz.
    Lucy is characterized as a “fussbudget”, crabby, bossy and opinionated girl who bullies other characters in the strip, particularly Linus and Charlie Brown. While she is not exactly cold-hearted, she can be quite antagonistic, often playing the villain role in a number of stories
    The model is in proportion to my Charlie Brown model:https://www.thingiverse.com/thing:2510789
    No supports are required. If you have the proper filament colors, no painting is needed.
    The model is 140mm tall.
    Enjoy!
    Print Settings
    Printer:
    FlashForge Creator X Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    .2mm Infill:
    10% Notes:
    See below for helpful printing and assembly tips.

    Building the model
    Colors (there are no multiple printed pieces)
    Black:
    l_hair_right
    l_hair_left
    l_eyebrows
    l_eyes
    l_mouth
    l_shoes_middle
    ..
    Beige or Flesh:
    l_head_top
    l_head_bottom
    l_arm_left
    l_arm_right
    l_legs
    ..
    White:
    l_shoes_front
    l_shoes_back
    ..
    Blue:
    l_dress
    l_shoulder_right
    l_shoulder_left
    l_socks
    ..
    Any color (hidden pieces)
    l_pins
    .. Printing and assembly tips
    Printing tips
    1-As with most of my models, no supports are required.
    2-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish.
    3-I did not require any rafts or brims for any of the parts.
    ..
    Assembly tips:
    1-The eyebrows are small and print well but if for some reason you have an issue inserting them into the head (over-extrusion or a squish that cannot be cleaned) simply flip them over and put them in with the flat side facing out.
    2-The left/right eyes are interchangeable. There is an up/down positioning of each eye. If it does not look right when inserted just rotate the eye piece for a better fit.
    3-The left/right shoulders look similar but are slightly different, so take care when connecting them to the dress.
    4-The leg holes in the dress should be positioned toward the back.
    5-The left/right shoe parts are not interchangeable but are easy to distinguish which is left and right.
    5-Refer to the assembly diagram for putting the model together. The model is meant to be glued.

  • Laurel wreath 3D Model

    Laurel wreath 3D Model

    3D model laurel wreath for visualization and production on CNC machines.Model for 3D printing.Available formats upon request: .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.Download 3D Model laurel wreath obj. stl by VitAnGen

  • metamorph 3D Print Model

    metamorph 3D Print Model

    pokemon metamorph

  • Design shelf to fit to measure 3D Print Model

    Design shelf to fit to measure 3D Print Model

    Design shelf to be custom-built
    This piece of furniture is made up of two pieces that are completely printable on a printer with a tray of at least 20 * 20 cm.
    #DAGOCULTS

  • Reaper’s Hellfire Shotguns 3D Print Model

    Reaper’s Hellfire Shotguns 3D Print Model

    Summary
    This is Reapers Hellfire Shotguns from the game Overwatch modelled using Fusion 360. It is not scaled properly and requires manual scaling.

  • Magpul MOE Slot Bolt 3D Print Model

    Magpul MOE Slot Bolt 3D Print Model

    Summary
    Bolt to attach accessories to Magpul MOE Slot hand guard

  • HyperCube XY LM8UU Bearing Clamp With Skull 3D Print Model

    HyperCube XY LM8UU Bearing Clamp With Skull 3D Print Model

    Summary
    Added a nice skull on the Hypercube XY bearing clamp
    Print Settings
    Printer:
    Homemade Printer Resolution:
    0.2 Infill:
    100

  • Santa & Gingerbread Man 3D Print Model

    Santa & Gingerbread Man 3D Print Model

    Summary
    Santa Claus with Gingerbread Man 3D printed decoration for Christmas

  • Spool Holder V2 – Quick Change 2020 Edition 3D Print Model

    Spool Holder V2 – Quick Change 2020 Edition 3D Print Model

    Summary
    This is a remix of “New Prusa i3 MK1 & MK2 Spool Holder V2 – Quick Change” (https://www.thingiverse.com/thing:1768975) by IsmaelPR1 (https://www.thingiverse.com/IsmaelPR1/about).
    I really liked his design, and am printing one for my Prusa MK2S, but I wanted a matching holder for my Tevo Tarantula. I remixed this so the holder can hang on a 2020 extrusion. There’s a provision for M4 screws to mount it to the back of the extrusion.
    PLEASE NOTE: This was remixed from his 90mm holder. For the 140mm rollers and accessories, please visit his thing.
    I have included IsmaelPR1’s 90 mm rollers and m8 rods, though I used 5/16″ bolts for mine.
    Print Settings
    Printer Brand:
    Prusa Printer:
    i3 MK2S Rafts:
    No Supports:
    No Resolution:
    .2mm Layer Height Infill:
    none Notes:
    Easy print. Print the spools as shown. For more details visit the original thing at https://www.thingiverse.com/thing:1768975
    Post-Printing
    Simple Install
    Used 608 bearings and 5/16″ bolts that I had in my shop. clamp it on to the top of your rig and add a couple of m4 bolts and T-nuts. That’s it!
    Happy Printing!

  • Chalight candle holder 3D Print Model

    Chalight candle holder 3D Print Model

    This Chalight candle holder has the distinctive feature of being a decorative object, either to be used with a tea-light candle or to use it with a torch candle (D22 mm).

  • PERSONALIZABLE 3D LAMP MOM 3D Print Model

    PERSONALIZABLE 3D LAMP MOM 3D Print Model

    MAMAN

  • Bulb Pen Holder 3D Print Model

    Bulb Pen Holder 3D Print Model

    A ball-shaped pen holder.

  • MD80 Aircraft Scale Model 3D Print Model

    MD80 Aircraft Scale Model 3D Print Model

    This is a 1/2 scale model if the MD80 aircraft.

  • Charlie Brown 3D Print Model

    Charlie Brown 3D Print Model

    Charlie Brown, from the comic strip Peanuts by Charles Schulz.

  • Rhino 3D Model

    Rhino 3D Model

    Rhino

  • Samsung Microwave handle bracket 3D Print Model

    Samsung Microwave handle bracket 3D Print Model

    Summary
    My samsung microwave handle broke while opening the door. the inside bracket, which is part of the interior door panel, where the screw goes is super flimsy. this slips right over the original screw hole and you can use the original screw to secure it.
    printed in ABS
    Print Settings
    Printer Brand:
    Wanhao Printer:
    Wanhao Duplicator i3 V2 Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    100%

  • human arm 3D Print Model

    human arm 3D Print Model

    Summary
    human arm

  • Anycubic prusa i3 – left side motor fan support 3D Print Model

    Anycubic prusa i3 – left side motor fan support 3D Print Model

    Summary
    This is a 40mm fan support for the extruder motor.
    With this design you can cool the motor and keep the hotend protected from the fan air flow.
    You can screw the fan with the support to the motor (with M3 bolts) or you can use neodymium magnet (4mmx2mm) and insert them in the holes. This second option offer a better access to the filament when you have to change it.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    20-30%

  • Geeetech i3 Pro B LCD holder 3D Print Model

    Geeetech i3 Pro B LCD holder 3D Print Model

    Summary
    This is a modification of original Prusa LCD holder for Geeetech i3 Pro B (acrylic). While original Prusa has LCD mounted on front of the printer on two rods, i3 Pro B has LCD mounted on top of the printer. I moved LCD to the front as well and modified LCD holder to fit on two layers of 8mm acrylic there.
    LCD supports (A and B) has been modified to fit i3 Pro B.
    LCD cover and LCD knob is the same as original Prusa https://github.com/prusa3d/Original-Prusa-i3/tree/MK2/Printed-Parts/stl
    LCD cable holders are resized to fit threaded rod Geeetech has (mine on i3 has 9.5mm outside diameter, original Prusa use 10mm rods).
    The assembly is the same as original -http://manual.prusa3d.com/Guide/6.+LCD+assembly/300
    The rotary encoder and reset button on i3 are too long, it’s necessary to cut reset button by about 5mm and encoder rod by about 7mm so it fits to LCD cover. Measure twice before cutting, the length might depend on which Chinese clone you have.
    Print Settings
    Printer:
    Geeetech i3 Pro B Rafts:
    No Supports:
    No Resolution:
    0.2mm Infill:
    20% Notes:
    printed in PETG

  • India Map Puzzle 3D Print Model

    India Map Puzzle 3D Print Model

    Summary
    Just a puzzle of the India Map, illustrating the states/regions of the country.
    Provided complete stl (not tested but should be fine).
    Check out the World Map Puzzle here: https://www.thingiverse.com/thing:2412659
    Check more designs here: http://www.thingiverse.com/2c2know/designs

  • Human orbit based design 3D Model

    Human orbit based design 3D Model

    Human orbit based design for clinic decoration

  • Mughal Surahi 3D Model

    Mughal Surahi 3D Model

    The Ancient Mughal Surahi for storing and serving wine. The symbolic pot of heritage lifestyle of Mughal empire. The historical design is full of Mughal art and culture. Its not a full sized pot to be used for serving wine, Its just a show piece but fully working and printable model.

  • Wreath 3D Model

    Wreath 3D Model

    3D model is an Wreath for visualization and production on CNC machines.Model for 3D printing.Size of model in mm: 78x61x2 mmAvailable formats are .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.Download 3D model an Wreath .obj, .stl, from VitAnGen

  • Mini switch point for wooden track 3D Print Model

    Mini switch point for wooden track 3D Print Model

    Usually, I remix wooden track pieces, but now I just wanted to check how fast you can draw a Brio alike piece from scratch in Fusion 360.

  • Ferris Wheel with Platforms (24cm diameter) 3D Print Model

    Ferris Wheel with Platforms (24cm diameter) 3D Print Model

    Summary
    This is a 24cm-diameter ferris wheel. It is designed to sit in a fixed position, and it has 60 platforms (30 on each side), each 2.5cm square. The platforms can be used to put figurines or anything else that can fit.
    There are four distinct types of pieces. You need 4 each of the two orientations of the quarter wheel, and 1 each of the stand, male wheel connector, and female wheel connector.
    Post-Printing
    The included pieces are sufficient to make the ferris wheel stand up on its own. However, to increase the stability, I added small pieces of velcro to the flat sides of the wheel pieces. I also made room for you to insert a 1/2-inch ceramic magnet into the wheel connector to increase the connecting force and make the two pieces less likely to break apart.
    How I Designed This
    I designed all of the parts using FreeCAD. I am grateful to the FreeCAD community for their help in learning how to use their wonderful software.

  • Plain Caliburn Magwell 3D Print Model

    Plain Caliburn Magwell 3D Print Model

    Summary
    This is a Caliburn magwell section without any words, so you can add your own words or markings there.
    *You might notice the letter outlines in the preview but it shouldn’t show up in the print, toggle Thingview to confirm.

  • Naza Mount for QAV 180mm quadcopter 3D Print Model

    Summary
    An organised mount for Naza with the new version PMU/LED combo. Also has a provision for two 1.65mm brass power rails in place of a power distribution board as well as a camera mount for an Eachine MC-02 AIO camera. You will need 300mm of brass for the power rails, 4 m3x10-12mm bolts, naza m lite or v2 with the combined PMU/LED and an mc 02 camera or similar.
    This was designed on the clone frame available from ebay for around 10USD. When built with 2403 2300kv motors, FVT little bee 20a esc’s and a 1300mah 3s 30c pack you can expect flight times between 6 and 10 minutes.
    Print Settings
    Printer:
    Tronxy a3 Rafts:
    No Supports:
    Yes Resolution:
    ~.08 Infill:
    10-100% Notes:
    This is a fairly easy print, no special settings required aside from support for a couple of sections which could be cut out post printing if you choose. The PMU is a very tight fit and is intended to have a clear diffuser between it and the frame. The PMU’s plastic case and heat shrink must be removed for it to be installed. A dab of rubber cement or something similar will be required to keep the PMU and FC in place. All wires can be run under the FC and attached to the rails for a very clean install.
    Post-Printing
    The longitudinal holes for the power rails will likely need reaming as they are designed with very tight tolerances for a friction fit.

  • usb hub 3D Print Model

    usb hub 3D Print Model

    Summary
    for usb hub

  • 24 LED Neopixel Glasses for Arduino nano 3D Print Model

    24 LED Neopixel Glasses for Arduino nano 3D Print Model

    Summary
    This is a remix of 4 existing files in order to make a pair of self contained Neopixel glasses using two 24 LED Neopixel rings, and an Arduino Nano processor.
    I tried to hide the wiring inside the frames as much as possible, the bridge between the two rings is hollow for that purpose. Unfortunately one side is heavy, so I added an elastic to the back to keep the glasses on securely.
    If you decide to use a different processor, you can mirror the left arm and add what you need instead of trying to remove the box on the right arm used to house the Arduino Nano.
    Needed to build:
    3D printed parts, – Print one -Glasses new, one left arm, one right arm, and 2 pins
    2x 24 LED Neopixel rings- by Adafruit or on Ebay
    1 foot – 3 conductor ribbon cable
    1/8 inch drill – to clean out the holes in the arm for the arduino wires
    3/16 inch drill – to clean out the holes for the arm pins
    7.2v LI battery, or a battery of your choice that will run the processor and LEDs (I used 2 3.7v 180mah batteries in series)
    connector for the battery
    Nailfile emery board – to sand the edges that will be close to the face, and to round the pins so they are easier to move.
    soldering iron
    hot glue gun
    Arduino Nano with no pins.
    You will also need to program the Arduino Nano with the code. You will need the Adafruit_NeoPixel library. I reduced the brightness in the code so that you don’t burn out the Arduino 5v regulator. They are still bright enough. Solder the tx wire to pin D3.
    The code is from Adafruit.
    Credit: Glasses frame:
    Harry Potter Glasses – with hinges
    by sivar2311, published May 26, 2013
    Arduino holder:
    Arduino Nano Mount
    by tjbn, published May 22, 2017
    Pins:
    Pin Connectors V3
    by emmett, published Nov 5, 2012

    Print Settings
    Printer:
    Anet A8 Supports:
    Yes Resolution:
    0.15 Infill:
    35% Notes:
    I used support only when touching the buildplate for the Glasses rings, This makes it easier to use the holes for the arms
    The arms need support everywhere. I| use ZigZag, 5mm support line distance.

  • Low Poly Raptors Pack 3D Model

    Low Poly Raptors Pack 3D Model

    Four diferent posed Raptors for 3d printideal for those who love these amazing creaturesSTL,OBJ and PLY formatsWatertight models and printable readyFeel free for contact me for any kind of problem, will be a pleasure to help solving any issue

  • A Box for Anything and A thing to Put Pens 3D Model

    A Box for Anything and A thing to Put Pens 3D Model

    The Box has Golden Ratio tuned dimensions.Pen putting THING is optimized for using less Filament and you donot need FULLY SUPPORTED PRINTING. Touching Bed Support is enough.

  • Table Lamp 3D Print Model

    Table Lamp 3D Print Model

    3D printed table lamp (E14)

  • extensible module cabinet 3D Print Model

    extensible module cabinet 3D Print Model

    #DAGOCULTS

    expandable module, it is enough to replace the corners to modify the geometry of the piece of furniture, CTP boards or other material can be used for plating.
    the modules are assembled with wooden dowels of diameter 5
    the plating: 230 x 130 x 5
    130 x 130 x 5
    simple module size: width 260 height 160 depth 160

  • CUSTOMIZABLE 3D LAMP BOULANGER 3D Print Model

    CUSTOMIZABLE 3D LAMP BOULANGER 3D Print Model

    BOULANGER

  • Warcraft 1 hand Axe Eredar Splitter 3D Print Model

    Warcraft 1 hand Axe Eredar Splitter 3D Print Model

    D’après le modèle visible dans world of warcraft obtenue durant les invasions pré Légion :http://fr.wowhead.com/item=141614/fendeuse-eredar

  • rotating cylinder cabinet 3D Print Model

    rotating cylinder cabinet 3D Print Model

    furniture that can rotate to have several storage space while remaining compact it allows to store everything and anything

  • Pi-Zor: a bitcoin cold wallet 3D Print Model

    Pi-Zor: a bitcoin cold wallet 3D Print Model

    Summary
    The is a case for the Raspberry Pi that is intended to be used as a Bitcoin hardware cold wallet. Note that this will never be as secure as a wallet using a secure element, like a Ledger Nano. The project’s namesake, the Trezor, doesn’t have a secure element, but is still more secure since its designed by security minded professionals, rather than a DIY project using a Pi Zero. The plus side, is you build it yourself so you know what’s in there, and if you take precautions, then you can probably keep this secure.
    See my first explorations into this concept here: http://www.allaboutjake.com/pi-offline-crypto-wallet/
    I am currently working on software for the Pi to expose an Electrum wallet on the Pi using the a menuing system on the LCD. This will include the signing of transactions using the QR codes and the PiCamera for input and the LCD for output.
    If you find this useful, or you’d like to donate to the future development of this system, send some satoshi to the following address: 1PqvzEtDcboQYF2yhMvcdzK3J6uj7SMtQQ
    Bill of materials
    Raspberry Pi Zero (I’m using a W for development, but a non-W is better for a cold wallet)
    1.44 ST7735 based LCD: http://r.ebay.com/b7ZpxI
    5-Way Tactile Switch: http://r.ebay.com/U5YHC6
    5MP Pi Camera: http://r.ebay.com/igagFy
    Screws (M2.5×12 for the outside, M2.5×4 for the Pi inside.)
    How I Designed This
    I used OnShape to develop the case. Its kind of a tight fit, but the case does close.
    The “middle plate” part is an unintended consequence of not having the right screws. I’m looking to get some M2x2 waver head screws for mounting the parts to the case.
    I chose the 128×128 LCD specifically because it was 30mm wide and had more pixels than OLED displays used by other projects. (see http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager for one such project that uses OLED). More pixels are desirable for QRCode bandwidth.

    Future Possibilities
    Some ideas on how this may evolve:
    A PCB “bonnet” that holds the LCD, and 5-way switch, and maybe some extra hardware
    A real-time clock module to remember the time
    A lipo battery? (Its already pretty tight in there, not sure if I can fit it without making the case bigger)
    Move to buttons (similar to http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager). The 5-way switch was quick and easy, but I think buttons would be better.
    Inspiration
    Things that inspired this project, but not specifically a remix
    The initial inspiration for this project was the awful “Taken 3” movie where Liam Neeson uses a fictional device to download the GPS history from a car. (I don’t recommend this movie). See the frame cap below to see the device.
    Other projects to make a Pi Zero-sized user interface to the Pi Zero include:
    http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager
    https://www.thingiverse.com/thing:1193350
    Many GameBoy-like systems like PiGrrl, etc.

    I do have a very particular set of skills, skills I have acquired over a very long career.

  • Malayan M180 Carriage MK3 3D Print Model

    Malayan M180 Carriage MK3 3D Print Model

    Summary
    This is my MK3 carriage for a single extruder for the Malayan M180.
    I removed the left hand extruder, except for the fan, and thirmister (for some reason it will not work if you remove this) and used the right hand heating block and the filament guide.
    You will also need, a 60mm long hot end extruder guide, and a length of aluminum bar 90mm long by 4mm thick. This is the heat sink and mount for the hot end extruder. Drilled and tapped in the centre to M6 with two 6mm mounting holes to attach to the carriage.
    I used some M4 brass threaded inserts but you could use nuts and bolts.
    I also use M3 inserts to mount the fan.
    You will have to adjust the Z axis stop sensor to level the bed, as the heating block protrudes slightly than on the original carriage.
    For the filament drive I used a metal Bowden type, which is cheaply available on EBay etc.
    and used the left hand fan to cool the stepper motor. This was then fitted to the printer casing above the filament spool, using some scrap aluminum angle.
    The whole thing took about 4hrs to complete and set up but the results are worth it.
    It is much easier to load filament, the prints are great and I can now reach higher temperatures.
    Print Settings
    Printer:
    Malyan M180 Rafts:
    Yes Supports:
    Yes Resolution:
    High Infill:
    50% Notes:
    Takes about 17hrs to print

  • East3D Gecko Low-Profile Front Panel Screen Bezel 3D Print Model

    East3D Gecko Low-Profile Front Panel Screen Bezel 3D Print Model

    Summary
    It is a low profile screen bezel designed for East3D Gecko.

  • mk8 3D Print Model

    mk8 3D Print Model

    Summary
    material utilizado PLA, funciona perfecto, tornillo M3 50mm de largo, 4 tuercas M3, 4 arandelas, 2 resortes, ruleman, engranaje de bronce, nema 17, conector neumático Ø4mm con rosca de M5
    Print Settings
    Printer:
    lazimaker Supports:
    Yes Resolution:
    0.3 Infill:
    20%

  • Tissue Holder 1.0 3D Print Model

    Tissue Holder 1.0 3D Print Model

    Summary
    This tissue jar is able to take a toilet paper and dispense it as tissues. This will save you lots of money. It’s designed to fit some of the biggest toilet paper rolls, so it shouldn’t matter what brand/ size you use. The lid is held on with a rubber band. You can print this without any support. That being said I printed the lid top up and used support to get the desired print finish on top. I had to use supports in this case.
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.16mm Infill:
    10% Notes:
    At a 60mm/s speed using Cura it takes about 18 hours for the jar and 6 hours for the lid.

  • Ring 03 3D Model

    Ring 03 3D Model

    The ring size is 16mm.Anither information about this ring is mention on the pictureshttps://www.youtube.com/watch?v=QZRMuvssxTE&feature=youtu.be

  • LOGAN AND X23 INSPIRITED DIORAMA 3D Print Model

    LOGAN AND X23 INSPIRITED DIORAMA 3D Print Model

    LOGAN WITH X23 INSPIRITED DIORAMA FROM MOVIE LOGAN

  • OLD LOGAN INSPIRITED FIGURE HEAD 3D Print Model

    OLD LOGAN INSPIRITED FIGURE HEAD 3D Print Model

    OLD LOGAN INSPIRITED HEAD FOR FIGURES

  • Hamper Stool 3D Print Model

    Hamper Stool 3D Print Model

    I love the effects of spiralizing filament, so I designed a combination hamper and stool for my bathroom that puts spiralizing on display. Narrow, flattened spiralized pieces rest in printed casings on 3 sides of the hamper stool. The back is printed, flat pieces hot glued together. The seat of the furniture is pine and there are 4 wood dowels on the corners. The floor of the hamper is printed and put together with screws and a 3/8″ wood dowel.

  • Anvil 3D Print Model

    Anvil 3D Print Model

    It’s just a simple looking anvil. I’d say that this is a high-poly model since I used Subdivision Surface 4.

  • PERSONALIZABLE PENCIL CARD AL3DCONCEPT 3D Print Model

    PERSONALIZABLE PENCIL CARD AL3DCONCEPT 3D Print Model

    AL3DCONCEPT

  • Customizable Curtain Rod Hanger / Wall Mount 3D Print Model

    Customizable Curtain Rod Hanger / Wall Mount 3D Print Model

    Summary
    This is a customizable curtain rod hanger. There are a couple other hangers around, but i wanted one that i could adjust as needed.
    Enjoy!

  • Athlon argos shim 3D Print Model

    Athlon argos shim 3D Print Model

    Summary
    Zero stop shim for athlon athlon argos btr 6-24×50 ffp. they go under the scope cap, shim from .20″ to .38″

  • 9 Volt Battery 3D Print Model

    9 Volt Battery 3D Print Model

    Summary
    Need a 9 Volt Battery as visual aid

  • Sand Bottle Holder for Clickgear Golf Cart 3D Print Model

    Sand Bottle Holder for Clickgear Golf Cart 3D Print Model

    Summary
    This is a much improved rework of www.thingiverse.com/thing:1718939. It is designed to hold the large sand bottles that a lot of courses use on carts but attaches to the attachment points on a Clickgear push cart. My original design just wasn’t strong enough to stand up to the weight of a full sand bottle and the rigors of bouncing over the ground. This needs to be printed in a strong material – I used Polycarbonate and previously used Nylon, both of which are strong enough (and both can be challenging to print). I prefer the PC. In PC this is plenty strong and has been in use on my cart for quite a while with no problems. The picture also shows the assembly – all the pins are press fit and the design requires no other hardware.
    Print Settings
    Printer:
    Flashforge Creator Pro Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Notes:
    Print in a strong material like Polycarbonate

  • Full Bowden suite Infitary M508 + Bltouch 3D Print Model

    Full Bowden suite Infitary M508 + Bltouch 3D Print Model

    Summary
    This includes V6 E3D hotend mount, extruder mount and bltouch mount that has been calibrated for hotend height (depends on the hotend you bought, may need further customisation for bltouch mount)
    Requires redrilling block for X endstop to match the hotend holder (Used the Anet A8 upgrade by Nicolaferrara82)
    The extruder mount doesnt use screws, just sits comfortably between a 3 points on top of “left” (looking straight at it – See pictures) above Motherboard. Can be tightened in design, but I like that it isn’t that snug. You will put it under wing of Z axis top rod holder then slot in place.
    Print extuder mount with supports!

  • Treads Robot 3D Print Model

    Treads Robot 3D Print Model

    Print an army of robots with these 3D printed robots.

  • Arduino Mega Case 3D Print Model

    Arduino Mega Case 3D Print Model

    The idea of this stylish cover comes because always the development boards have a rustic style and they are unprotected.

  • Test piece for the functional game (0 / 0.05 / 0.1 / 0.2 / 0.3 / 0.4 / 0.5) 3D Print Model

    Test piece for the functional game (0 / 0.05 / 0.1 / 0.2 / 0.3 / 0.4 / 0.5) 3D Print Model

    Test piece to check the dimensions of the functional game.
    This will allow you to anticipate the shrinkage or widening of your hole, and to test the functional play suitable for your design requiring intertwining.

  • CAESAR INSPIRITED MODEL POSE 02 3D Print Model

    CAESAR INSPIRITED MODEL POSE 02 3D Print Model

    CAESAR, FROM WAR OF THE PLANET OF THE APES, INSPIRITED 3D MODEL 02

  • CAESAR INSPIRITED MODEL POSE 03 3D Print Model

    CAESAR INSPIRITED MODEL POSE 03 3D Print Model

    CAESAR, FROM WAR OF THE PLANET OF THE APES, INSPIRITED MODEL 03

  • Necklace – Black hole 3D Print Model

    Necklace – Black hole 3D Print Model

    Summary
    http://horizonlab.co/2017/09/01/necklace-black-hole/

  • Necklace – Spiral 3D Print Model

    Necklace – Spiral 3D Print Model

    Summary
    http://horizonlab.co/2017/09/01/necklace-spiral/

  • Apache Camper (pop up) door turn button 3D Print Model

    Apache Camper (pop up) door turn button 3D Print Model

    Summary
    This is door turn button (the piece that you turn down to keep the top door linked to the bottom door once the camper is up).
    It is my first design and probably a little rough but it works.
    Print Settings
    Printer Brand:
    Up! Printer:
    Up Mini
    Post-Printing
    You’ll need to remove the infill or not. Works just as fine.

  • Lazy Suzan Organizer 3D Print Model

    Lazy Suzan Organizer 3D Print Model

    Summary
    A Lazy Suzan Organizer. The pictures are pretty self explanatory.
    I am open to design suggestions. For example, I was considering making a stack-able version of the inner wedge.
    Enjoy!
    Print Settings
    Printer Brand:
    Rostock Printer:
    Rostock MAX V2 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    Nozzle – 0.4 Layer – 0.2 Infill:
    50% Notes:
    Requires a fairly large print bed. The printer requires at least a 215 mm bed.

  • Necklace – Double deltas 3D Print Model

    Necklace – Double deltas 3D Print Model

    Summary
    http://horizonlab.co/2017/09/01/necklace-double-deltas/

  • HOUSE 3D Model

    HOUSE 3D Model

    High quality model. Houseversion : 3ds Max 2014Render : V-Ray 2.40.30Format : STL filewidth : 211.62mmHeight : 100mmDept : 123.49mmThe ZIP file includes MAX file, FBX file, 3DS file, STL file.

  • Capsule for coffee 3D Print Model

    Capsule for coffee 3D Print Model

    Design in CATIA V5

  • Serpent Shelf 3D Print Model

    Serpent Shelf 3D Print Model

    #DAGOCULTS

  • Storage cabinet night table to place a lamp and store its keys 3D Print Model

    Storage cabinet night table to place a lamp and store its keys 3D Print Model

    Storage cabinet, night table for laying a lamp and storing its keys …

  • Trapezoid Ruler 3D Print Model

    Here´s a small geometric tool which will not only fit into every pencil case, but also in every small pocket – a trapezoid ruler. Without any numbers on it, you can still draw straight lines, as well as a 45 degree, a 60 degree, a 120 degree and a 135 degree angle. Print it with transparent filament and you will still be able to see the drawn lines on the paper when holding the ruler onto it.

  • Shaker 3D Print Model

    Shaker 3D Print Model

    Design in CATIA V5

  • Nerdhaus Poker Chip 3D Print Model

    Nerdhaus Poker Chip 3D Print Model

    Summary
    A parameterized poker chip, with a large symbol embossed in the center and a smaller symbol repeated around the edge.
    Download the SCAD file and use a dingbat font for a larger selection of symbols — we use that technique to generate quick and dirty game tokens for RPGs and board games, tool.

  • LED, battery, switch clip-on light 3D Print Model

    LED, battery, switch clip-on light 3D Print Model

    Summary
    This is a battery holder for a 9-volt battery with a switch and LEDs to light up a Monoprice Select Mini 3D printer. To complete the light, you’ll need:
    LED strip lights
    Switch
    Battery connector
    9v battery
    The hole for the switch may need to be resized to match the size your switch.
    Once put together, just slide it onto the end of the Z-axis arm, and switch it on. Using a battery, there’s no need to tap into any other wires.

  • Double badge holder 3D Print Model

    Double badge holder 3D Print Model

    Summary
    Yet another badge holder. It’s the vanilla “RFID badge holder” design, but not as cool as https://www.thingiverse.com/thing:1869475 which prints with bed-up supports. Mine wants needs internal supports, which mean you should get real friendly with your slicer.
    Having done that, the supports peel out and leave an awesome badge holder. It is roomier, letting me use both an RFID card and a second plastic identity card. The edges are nicely rounded, it comes off very smooth with no post-processing required.

  • Foot for V-Groove Aluminum Extrusion 3D Print Model

    Foot for V-Groove Aluminum Extrusion 3D Print Model

    Summary
    I made this so that I could have little footies on my 2020 aluminum extrusions I bought from Inventables

  • Dragon 3D Print Model

    Dragon 3D Print Model

    Summary
    Dragon, sculpted on Zbrush, the blue render was done with the 200K poly model. There was a 1M poly model but the file was too large (80mb).

  • Ashtray 2 3D Model

    Ashtray 2 3D Model

    Original author’s work.(stl )The model was prepared for printing on 3D printers.200/126/150 mm

  • Ashtray 3 3D Model

    Ashtray 3 3D Model

    Original author’s work.(stl )The model was prepared for printing on 3D printers.200/129/130 mm

  • Ashtray 1 3D Model

    Ashtray 1 3D Model

    Original author’s work.(stl )The model was prepared for printing on 3D printers.200/142/153 mm

  • Hanging Tool Organizer 3D Print Model

    Hanging Tool Organizer 3D Print Model

    High tech meets handmade in a collection that helps you build, craft, create and work smarter, no matter what your project.

  • Mini Vise 3D Print Model

    Mini Vise 3D Print Model

    High tech meets handmade in a collection that helps you build, craft, create and work smarter, no matter what your project.

  • Rabbit silhouette 3D Print Model

    Rabbit silhouette 3D Print Model

    small object in rabbit shape

  • EARRINGS trilonga 3D Print Model

    EARRINGS trilonga 3D Print Model

    I present one of my creations a pair of long, elegant and sexy earrings
    .

  • dreamcatcher bracelet 3D Print Model

    dreamcatcher bracelet 3D Print Model

    dreamcatcher bracelet

  • Wreath 3D Model

    Wreath 3D Model

    3D model is an Wreath for visualization and production on CNC machines.Model for 3D printing.Size of model in mm: 43x36x1.2 mmAvailable formats are .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.Download 3D model an Wreath .obj, .stl, from VitAnGen

  • Presto Pegasus Symmetry R5 part: Shock-proof GoPro Session Mount (V2) 3D Print Model

    Summary
    This is a 3D printing file for Presto Pegasus Symmetry R5’s accessory part: Shock-proof GoPro Session Actioncam mount. (Fits both GoPro Session & GoPro 5 Session)
    This is not a original stock design but optimised for TPU printing (designed by Symmetry R5 pilot C.N. OH aka Ryan FPV). It has a shock-proof feature which will protect your GoPro Session even more. 20mm spacer may be needed to screw the session mount tightly.
    This GoPro mount is compatible with Presto Pegasus Symmetry series frames.
    It is mounted with only two M3 screws on Symmetry R5 frame. No strap is required.
    Recommended to print with TPU with 100% scale.
    This file is free to use except for commercial use.
    This file is designed/provided by Ryan FPV

  • nema 17 2020 mount 3D Print Model

    nema 17 2020 mount 3D Print Model

    Summary
    offset mount for nema 17 stepper motor to 2020 extrusion

  • 608ZZ rubber or tire 3D Print Model

    608ZZ rubber or tire 3D Print Model

    Summary
    When you need transform a 608zz bearing into a tire or simply add to it some rubber for 3d carriage application or make the bearing can roll over an alluminium profile, you can use this thing. It’s a rubber with the dimmensions of the 608 bearing. You can use the solid work model to modify it in accordance to your need.
    IMPORTANT: You must use flexible filament.
    Remember for flex fil:
    print SLOW speed (no more 30mm/s)
    No retract
    Enjoy it!
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    0.2mm Infill:
    40%

  • Cable Carrier 3D Print Model

    Summary
    Common use snap-fit cable carrier with enclosed top.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    Doesn’t Matter

  • Puzzle Cube 3D Print Model

    Puzzle Cube 3D Print Model

    Summary
    5 piece puzzle cube.
    finished is a 3×3 cube

  • Pendant 01 3D Model

    Pendant 01 3D Model

    All information about this pendant is mention on the pictureThe gem count 11.each gem size is 1.2mm

  • Lucky Bottle 3D Print Model

    Lucky Bottle 3D Print Model

    Lucky Bottle

  • Candy Bowl 3D Print Model

    Candy Bowl 3D Print Model

    Decorative Candy Bowl

  • 3rd ear case for iPhone 7 plus 3D Print Model

    3rd ear case for iPhone 7 plus 3D Print Model

    iPhone case (iPhone 7 plus) has ear attached to it, ear can also work as stand for video watching

  • Low-poly unicorn 3D Print Model

    Low-poly unicorn 3D Print Model

    A low-poly unicorn sculpture