storage system for small parts. the number of boxes can be increased by attaching together
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Robo 3D R1 Plus Shroud with Cable Hook 3D Print Model
Summary
This was a simple combination to allow an easier alternative to a cable chain. It seems to work fine if you add the two screws to fasten it down.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
Yes Supports:
Yes Resolution:
.2 Infill:
100% -
MicroBitBox 3D Print Model
Summary
Small handy box for storing small too bits, drills, etc. Prints quickly, low cost.
Print Settings
Printer:
AnyCubic Delta K2 Rafts:
No Supports:
No Resolution:
.02 layer height, 3 walls (1.2MM) Infill:
20% Notes:
Size 60 x 20 x15 MM
How I Designed This
Nice fitting small box with lid.
I have a collection or tiny end mills used in CNC carving wax for “lost wax” casting of silver jewelry. I wanted a small box I could label to store these milling bits. They are 1/8″ diameter with tip sizes down to 0.003″.
Could be useful for storing spare small drill bits. I usually buy in multiples.
Easily labeled using a Brother P-Touch.
Overall size of this MicroBitBox is 60MM x 20MM x 15MM (LWH). The top is a secure snug fit. The box section is designed to be stout (heavy wall) while the top is purposely lighter weight.
I used natural PLA in the examples shown. -
Fitting Planetary Gear 3D Print Model
Summary
The sun and planetary gears did not fint the shaft. So I widened the holes a tiny bit to make them fit
It includes all needed files to print. Just make sure you print 3 x planet gears and 1 x sun gear
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.12mm Infill:
20 -
One Piece Luffy 3D Model
One Piece Monkey D Luffy. 3D model prepared for 3D printing. The model is presented in formats Obj and Stl.
-
Self-Intersecting Torus 3D Print Model
Here’s something fun I made in blender. The photograph is of one after a layer of light blue, Rustoleum, textured spray paint.
-
Self-Intersecting Torus with Twist 3D Print Model
This is an adaptation of my earlier model:https://cults3d.com/en/art/self-intersecting-torus
-
Lion Medallion 3D Print Model
I started with a lion model by thingiverse user YahooJAPAN.https://www.thingiverse.com/thing:182229
Then I deformed it with lattices, cut some parts off with booleans, and applied lots of sculpting brushes in blender. -
Taz 4 (or 5) Hot End Extruder Bracket Clamp 3D Print Model
Summary
I still use my Taz 4 which I bought in 2014. One thing that always annoyed me was the fact that the hot end assy holder which only has one screw at the top (for quick assembly) allows the weight of the extruder and hotend parts to allow the bracket to pull forward at the top corners of the bracket. I usually use some plastic clamps to pul the bracket back at the corners to the X-carriage and double bearing holder. I would be happier if the design used screws at the corners. The result of the corners pulling away from the carriage is some slop in the hotend which causes deviations and irregularities in the paths as the hot end changes direction. Some of that can be seen as patterns over a large flat surface. The clamps help some, but the entire system has play so you cannot get rid of all of it. Also, poor adjustment and leveling of the bed can make this issue worse.
Anyway, I have used some cheap plastic clamps from Harbor Freight but they pop off easily because of the geometry, and I decide to do something to improve the clamping.
The result is what you see here. It uses two different clamp pieces and a 6-32 x 1.25″ long machine screw and two #6 nuts (because that’s what I had). You could use M3 hardware of the same length. On each corner the existing outer top double bearing holder screw and washer is used to hold the shorter part of the clamp. It is a bit too short for my taste so I will get an M5-.5x15mm screw when I get a chance. The stock one is a bit short even though I recessed it into the clamp. But it works for now. Note that the long clamp has two bumps on one side that go against the extruder bracket. On the left side those two bumps actually straddle the gusset. The extra nut is to help keep the bracket straighter. As you can see it starts to tilt as it is tightened. You only need to tighten it enough to pull the bracket against the X-carriage; just lightly tightened. If I figure out something better, I will revise this. This design will fit both the V1 Budahschnozzle and V2 all metal extruder brackets. (The heights are different). You may need to clean up the holes with a .140″ and .130″, or close, bit to insert the screws more easily. I used a fairly high fill: 90%. I used ABS with a .5 nozzle, .20mm layers and slowed it down about 20% to get the parts to stick well.
There are other solutions involving a major overhaul to the X carriage parts, but this is a fairly easy improvement. -
Skull Worx wheel hub cover 3D Print Model
Summary
Just blended Wheel Hub Cover for Worx 803 Beast Truck Wheel by anglegrinder9 with Oni Skull by Jooxoe3i to create a skull wheel cap not printed or tested yet just thought it may look cool 🙂 I may add more soon 🙂 threw in the blank 1 too for those of you who wish to add your own logos or models -
Jesus optical illusion 3D Print Model
Summary
I tried to cut this out of wood. (one layer not both at a time) It was very difficult to sand and make it smooth. So I figured why not design one then 3D print it. -
3 in 1 150W Discharger Voltage Tester Balancer For Lipo Battery 3D Print Model
Summary
Housing for the 150W lipo discharger that many RC guys are using. Has a press fit compartment for the actual controller and holders for the three light bulbs fixtures. The light bulb controller and all wires are located underneath the controller. There is also a storage compartment with a slide out cover to hold the battery cable and the three light bulbs when not in use. The unit ships with a Deans style T connector and I purchase a 9″ long XT-60 adapter cable and it is about the perfect length to be able to store and still easily reach the battery balance connector location when in use.
Hardware Required
Qty 18 x 4-40 Socket Head Cap Screws 0.500 long. (6 for bulbs holders & 12 for cover)
Qty 6 x 4-40 hex nuts (for light bulb holders)
The 12 screws for the cover can be shorter (I wouldn’t go less than 0.250 long) but the design will accommodate up to 0.500 long.
The threads for the bottom cover are designed into the part, but the screws will end up cutting the plastic a bit on first installation. I find it best to go slow with the screws about 1 turn at a time and then allow the screw to cool before continuing. When turned continuously the screws will get hot enough to melt PLA and ABS and destroy the threads.
I printed in PLA and have successfully discharged a 1500mah 4S battery from 16.8v to 14.8v without any overheating of the plastic parts (all 3 bulbs were on). However the bulbs get VERY HOT, DO NOT LEAVE UNATTENDED. I have not tested higher voltages than 4S.
Design files are included for easy modifications, Print Files are high resolution and do not always render on the thingiverse server.
Discharger amazon (the one in the pictures)https://www.amazon.com/Targethobby-Discharger-Voltage-Balancer-Battery/dp/B01ET33R5S/ref=sr_1_2?ie=UTF8&qid=1504837626&sr=8-2&keywords=150w+lipo+discharger
9″ Deans to XT-60 Cable Amazon (the one in the pictures)https://www.amazon.com/gp/product/B016AN4T8O/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Discharger Banggoodhttps://www.banggood.com/AOK-3-in-1-150W-Discharger-Voltage-Tester-Balancer-For-Lipo-Battery-p-1051214.html?rmmds=search
XT-60 Cable Banggood, A little shorter then I would recommendhttps://www.banggood.com/150mm-XT60-Female-Plug-To-T-Male-Plug-Adapter-Connector-p-1137559.html?rmmds=search
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
.35 Fast default setting with support Infill:
20-25% Notes:
Make sure your slicer is not generating supports for the 12 threaded holes, it will be almost impossible to remove the support material from the threaded holes.
Print in the orientation shown in pictures 3, 4 & 5
How I Designed This
Designed in Alibre Design, Exported to Fusion 360 to add threads, Exported as .stl for printing. -
Heavy Hauler 3D Print Model
Haul weighty stuff with this tiny but mighty dump truck. No payload or pile of rubble is a match for this vehicle.
-
Mighty Mixer 3D Print Model
Beat the turning drum of this machine and feel its concrete durability. This hefty brute will cement your collection, so be sure that Marcos the shoveler is nearby!
-
voronoi lighting 3D Print Model
voronoi luminaire
Three-piece + foot
Modular in 2 parts
Modular in size
Wall or luminaire -
Ultramarine Purity Seal 3D Print Model
Summary
Converted from https://www.ifind3d.com/stl-file/3D-model/design/11898 to incorporate the Ultramarine-logo and a flat bottom and cleaner area inside of the seal. I had to print the Ultramarine-logo as a separate piece since it was easier for the printer that way.
Post-PrintingThis is the final product made as a gift for my dear friend how (like me) is really into Warhammer 40k. I painted the seal first with gesso and the gave it four layers of red. The paper is thick watercolor paper soaked in coffee and I used actual ink and an ink pen to write nonsense about painting and stuff (in Finnish).
How I Designed This
I found the actual seal from the address above and used tinkercad to add and remodel it a bit. I used inkscape to design the logo and then just threw it to tinkercad. -
autolevel anet a8 3D Print Model
Summary
autonivel with effective and economic proximity sensor.
is installed directly at end of stroke z axis.
without changes in skinet just as the capacitive does not modify anything. -
YouTube subscriber counter WIFI 3D Print Model
Summary
This is a homemade WIFI subscriber counter. It has a 3D printed case designed in Blender. The schematic is very easy. The code as well. It is all based on the YouTube API example that you get when installing the library. It uses the WeMos board with the ESP8266 WIFI module. All you have to do is instal the WeMos core, install the youtube API liblary, copy the code, solder the small schematic and upload the code. I hope you enjoy.
Youtube tutorial video: https://www.youtube.com/watch?v=dB7XR6gkT14
Webpage: http://www.electronoobs.com/eng_arduino_tut16.php
Help my projects on Patreon: https://www.patreon.com/ELECTRONOOBS
my Q&A page: http://electronoobs.com/eng_preguntas.php
Creality Cr-10: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=11235055
Anet E10 printer: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_664901.html?lkid=11235052
Print Settings
Printer:
Anet E10 Rafts:
No Supports:
No Resolution:
0.4mm Infill:
20% Notes:
use 2 perimeters -
Replacement Leg Brackets For Futon 3D Print Model
Summary
The plastic legs broke on the center of my futon (which for some reason hinges in the middle?!) and so I sawed off the broken bracket portion of the legs and printed replacement brackets which could be epoxied onto the remaining legs. It works great while in place because the brackets don’t need to be load bearing but I would not be able to move the futon without breaking them. So if you use these be smart about it. This futon was a bad design. -
Photo frame super husband 3D Model
Photo frame super husband is perfect as a gift to my beloved husband and for interior decoration
-
Super dad foto frame 3D Model
The super dad photo frame is perfect as a gift for dent father to his beloved father and for interior decoration
-
Princess 3D Model
The word for room decoration, perfect for your daughter’s room or as a gift to friends, also suitable as a sign on the door or for photo shoots
-
Grandma topper 3D Model
The topper for the cake or bouquet, the inscription Beloved Grandmother, is perfect if you want to present a unique celebratory cake. File format .stl and further to edit in Blender editor
-
Topper Mother 3D Model
The topper for the cake or bouquet, the inscription Beloved Mom, perfect for mother’s day if you want to present a unique celebratory cake. File format .stl and further to edit in Blender editor
-
Headphone Hanger 3D Print Model
Summary
A redesign/copy of mistertech’s lovely Headphone / Headset Wall Hanger. Added a backing hook to mount on a modular shelf so I don’t need to drill into the cubicle wall.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Resolution:
0.20 mm -
Raspberry Pi Zero wall mount bracket 3D Print Model
Summary
Due to a lack of space, I needed a way to mount raspberry pi zero on the wall. Hope you’ll find it useful for your project(s).
DC Fan dimensions: 40mm x 40mm. -
Choke Test Cylinder 3D Print Model
Summary
I saw that Jonathan Bobrow’s file had some messed up shells, but thanks to the PDF he provided, it was easy to redesign in Fusion 360. -
Jessica Jones Allias Investigations 3D Print Model
Summary
I extruded this logo from a image I edited in Adobe Illustrator. This is a decorative logo from a image found online. I do not own this logo, I just edited it.
Print Settings
Printer:
CR 10 Rafts:
No Supports:
No Resolution:
.2 Infill:
40% or over Notes:
Should be printed with high infill for the logo to turn out correctly. -
Homero con Soportes 3D Print Model
Summary
Supports Free
Print Settings
Printer:
CreateBot Mini Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
15 Notes:
Fill density 10 -
Fighter jet 3D Print Model
Fighter aircraft, with missile, original model.
.obj file with textures and mtl file. -
DEA Remote Key Hook 3D Print Model
Allows you to replace the key hook on the DEA Door / Gate Controls.
-
storage blu ray a fixer or a pose 3D Print Model
blu ray storage to fix or to put.
I’m printing it out to see if it’s viable.
I would notify at the end of the printing if not viable I would make appropriate modifications.
#DAGOCULTS -
Toolholder for Orginal Prusa i3 MK2s 3D Print Model
Summary
This is a simple construction to organize your tools direct to the printer. It has space for a glue and a pliers. On the side you can hang your scraper.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
layer height 0.3 mm Infill:
20% -
Marble Machine 3D Print Model
Summary
This Marble Machine is inspire by the Coursera MOOC of The Tinkering Studio : Motion & Mechanic.
I created the plan with the website MakerCase then i drawed circles on Inkscape.
To make this project you need a laser cutter and cardboard (Tickness : 6mm Dimension : 700×400).
18.1mm is for Sodebo sauce tubes
16.568mm is for Posca.
You can make your one Marble Machine with MakerCase and Inkscape. -
Adapter for IKEA PS 2014 3D Print Model
Summary
Hello !
This is an adapter for the “IKEA PS 2014”, mounted on a Manfrotto 5001b tripod.
Best regards,
Jeremie.
Print Settings
Printer:
BQ Hephestos 2 Rafts:
Yes Resolution:
0.2 Infill:
50
How I Designed This
Designed with Blender v2.34 -
Velociraptor 3D Print Model
Summary
VELOCIRAPTOR
Made by Vaptor
Print Settings
Printer:
Tevo tarantula Rafts:
Yes Supports:
Yes Resolution:
0,2 Infill:
20 -
The Capitol – Legislative 3D Print Model
Inspired by the Pantheon in Rome and erected in 1793, this neoclassical masterpiece is home to both houses of the Legislative Branch: the United States Senate and the U.S. House of Representatives. Filibuster your friends to your heart۪s content as you imagine the congressmen who come through its dozens of doors to craft laws, debate, and set their sights on reelection.
-
The White House – Executive 3D Print Model
The President leads the Cabinet and the many departments of the Executive Branch from this iconic building. Admire the classically inspired architectural detail as you ponder the power within its walls.
-
Multi-Color Pickle Rick 3D Print Model
Come on, flip the pickle, Morty. You’re not gonna regret it. The payoff is huge…I turned myself into a pickle, Morty! Boom! Big reveal: I’m a pickle. What do you think about that?
-
DIY Projector Dock for the Nintendo Switch 3D Print Model
In this project, we’ll show you how to DIY your own Portable Projector for the Nintendo Switch! We designed and 3D printed a custom dock that holds an off-the-shelf PICO projector. This of course allows you to project gameplay from the switch to just about any surface!
-
Amazon Echo Dot Wall Mount ( Low Profile ) 3D Print Model
Summary
Great low profile Amazon Echo Dot Wall Mount. This design does not require supports, has multiple mounting options, great sound transmission and is less than a 2 hour print. Check out the video https://youtu.be/dyQPKg6SQA4
50lb dry wall anchor screws: http://amzn.to/2w4HpXN
Reference to other model : https://www.thingiverse.com/thing:1463045 -
Imperial Assault Dice 3D Print Model
Summary
If you lose a die or can’t buy extras because they seem to be out of stock almost everywhere- here you go. Not sure how balanced they are but they were fun to make. Have only printed the red die so far and the symbols on the sides came out nicely, while the symbols on the top and bottom were too shallow. I have tried to adjust this by making the top and bottom symbols slightly deeper but am yet to test how this turn out. I intend to print with filament on the appropriate colour and then use black or white paint to make the symbols stand out.
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Extended Rafts:
Doesn’t Matter Supports:
No Infill:
100% Notes:
The depth of the symbols on the top and bottom sides of the dice may need to be deeper. Depth of all symbols varies. -
Chomper 3D Print Model
Summary
this is Chomper from Plants vs zombies, it has around 850k faces, modeled in 3d coat, I haven’t printed it -
Titanfall Scavenger (rough draft) 3D Print Model
Summary
If you know Respawn can you ask them to put him in, This titan can steel weapons and abilities from fallen enemies that have been terminated by him, his “rewards core allows him to go from a stryder class titan with no dashes, to an atlas titan with one dash, then finally to an ogre class titan with two dashes, these cores have a 250% faster core gain than from most titans and in the menu you can customize the loadout with merits (first you need to unlock it by using the weapon or ability in combat with Scavenger) , and the Four scavenger kits would be; 1. All abilities will have a 20% less cooldown. 2. Removes weakpoints from scavengers chasis. 3. enemies will always be shown with a map hack (for you only.) 4. Titan kills generate a shield and assists generate half a shield. Also if you equip the 40mm tracker cannon it automatically changes your offensive ability with tracking rockets and the other way around. -
Low Poly Kitten 3d Print 3D Model
Low poly sculpted kitten with stylish, folded papercraft appearance. The 3dsmax 2017 scene file contains the base mesh with modifiers in the stack, .OBJ and .STL are full resolution and print-ready.
-
AK-74 3D Model
The AK-74. great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Baking Spanch bob by Mksmss 3D Model
baking Spanch bob . Понравится взрослым и детям. Очень качественная модель. Спасибо.
-
Buckle Box by Mksmss 3D Model
Buckle Box отличная игрушка. Понравится взрослым и детям. Очень качественная модель. Спасибо.
-
Knife set 3D Model
knife set. great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Artificial rose 3D Model
artificial rose. great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Chess Set 3D Model
Very soon you will be able to impress your friends with an exclusive chess made in vanguard style. The dynamics and expression that literally radiate the finished figure will definitely appeal to lovers of innovative design solutions.. a great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Spring 3D Model
spring. a great thing. Need in everyday life. Will appeal to adults and children. Very high quality model. Thank you.
-
Colt 1911 by MKSMSS 3D Model
Colt 1911 – great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Spaceship fillenium malcon YT-1300 by Mksmss 3D Model
spaceship fillenium malcon YT-1300 great toy. Will appeal to adults and children. Very high quality model. Thank you.
-
Photo frame 3D Print Model
Here is a small frame for photos or sketches with a dimension of 10×15 cm.
-
Coffee stencil – Banksy’s hearts 3D Print Model
http://horizonlab.co/2017/09/05/coffee-stencil-banksys-hearts/
-
Coffee stencil – Google T-Rex 3D Print Model
http://horizonlab.co/2017/09/05/coffee-stencil-google-t-rex/
-
Human Skull 3D Print Model
Using 3D scans of an actual human skull, the team at 3D Design Services by MakerBot created this scale replica. It’s ready for the classroom or collector, and prints in five pieces that are simple to assemble. Ready to print on all MakerBot Replicator 3D Printers.
-
predator functional knives 3D Print Model
Summary
cuchillas de predator funcionales lo nunca viste para la impresion 3d
material adicional=cinta elastica y belcro
leed el archivo del bloc de notas que dice ller importante se os explicaran un par de cosillas a tener en cuenta.
pasaos por mi canal de youtube a partir del 8/9/2017 para ver el “3d reviw”
mi canal:https://www.youtube.com/channel/UC_qQQCfLqemEyeDy8zRWBDg -
Tire for siku car 3D Print Model
Summary
I have made tires for small Siku modell cars. Tested with Siku 1056, VW Beatle Cabrio.
My little son has lost the original tires and the printed replacement was a pleasure for him 🙂
Printed with FlexiSMART TPE-Filament!
Print Settings
Printer:
Creality CR-10 Supports:
No Resolution:
0,06 Infill:
100 Notes:
FlexiSMART TPE
How I Designed This
Designed with FreeCAD -
TS100 Soldering Iron Stand 3D Print Model
Summary
This is a Soldering Iron Stand intended for the TS100 Soldering Iron and is made from a copper water pipe.
The design is provided as an SVG file which should be printed out and the selected template cut out and wrapped around the pipe and then cut out of the copper. See the video https://youtu.be/K7X_7fUIjKI for details.
How I Designed This
Autodesk Fusion 360 and ExactFlat
I used Fusion 360 for the desing of the stand.Inspiration for the iron holder can from a ring spanner so that was used for the initial angles and holder shape.
As the design was applied to a tube I needed to flatten this and used the ExactFlat add-in for fusion to do this.
The template produced by ExactFlat wasn’t quite the correct size, probably due to differences in paper sizes. Inkscape was used to size it, tidy up the design and produce variations.Overview and Background
Looking for a stand for my TS100 Soldering iron I found inspiration from a spanner and converted a piece of copper water pipe into the stand.
I used a off cut from a copper water pipe of 15mm diameter and just over 150mm in length and a paper template to show me where to cup the pipe.
Once cut to shape certain parts were unrolled. There is no reason that the template can’t be used on a flat sheet and then the front part that holds the soldering iron rolled up.
Materials Needed
What was used
I used a piece of copper tube 15mm in diameter and approximately 150mm in length.
Once cut and shapped I mounted it on a Black Nickel electrical blanking plate. Anything with a bit of weight could ne used, such as a piece of wood or perspex. -
Folded Container 3D Print Model
Summary
Desktop container in origami folding appearance.
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
Higher the better! -
3D Printer XY Motor Parts for the M-Project 3D Print Model
Summary
3D Printer XY Motor Parts for the M-Project -
DIY Basketball Hoop 3D Print Model
This is a quick and easy weekend project.
-
Raspberry Pi Zero W Case (short cable) 3D Print Model
This is a variation of my other Remixed Pi Zero W case but this one uses the shorter camera cable.
-
Ripper’s London – The (Modular) Factory 3D Print Model
Sing along…”And did those feet in ancient times…”. Here is one of those dark satanic mills (or factory) that provided work for the masses in Victorian times. Hard work in dark, grim, unsafe surroundings for little pay, or as the owners would call it – a holiday camp for the lower classes.
This is a modular building, so that you can design your own victorian industrial paradise for the oppressed masses of London’s East End.
I made this and the rest of the range of 28mm buildings to accompany the “In Her Majesty’s Name” set of wargaming rules by Craig Cartmell and Charles Murton, published by Osprey Wargames, and because I’ve been watching “Ripper Street” on that new-fangled television apparatus. They should suit any variety of Victorian building usage that needs a taste of the old East End, and many of the buildings will still be alive and kicking in ‘Station Roads’ up and down the country and so useful for train scenery building. -
Little UFO (basic) 3D Print Model
Hey! Little UFOs are attacking! 🙂
Easy to print, easy to assemble! -
Zero – The Nightmare Before Christmas 3D Print Model
Jack Skellington’s dog Zero. A lovable scamp and a quick print … about 3 hours. I’ve used a “natural” filament for the print, just to give it a semi-translucent look.
-
Caliburn – Lower Stock Reinforcement 3D Print Model
Summary
This is a reinforcment part for https://www.thingiverse.com/thing:2376150.
I printed my Caliburn in PETG, which is more flexible than the PLA the designer intended the blaster to be printed in. The stock_alt2 part would be spread apart by the clear tube at the end when the threaded rods were tightened, enough to reduce catch’s reliability. Rather than print an entire new blaster in PLA, I made this part which keeps the threaded rods and stock_alt2 from spreading.
Print Settings
Printer:
D300VS Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
Rotate so it is standing vertically before printing -
Audi B5 S4 Drive Shaft Center Bearing Support 3D Print Model
Summary
Audi B5 S4 Drive Shaft Center Bearing Support
Just something to pack out the rubber webbing in the center support on the drive shaft and firm things up.
Pretty much only fits in there one way so easy to figure out.
Hardware:
6pcs M4 x 40mm Bolt
6pcs M4 Lock Nut
12pcs M4 Washer -
Abacus for the Blind 3D Print Model
Summary
A soroban abacus for the blind with spherical beads. There is extra spacing to make it more identifiable tactically. It has ten rows, so ten places. Can go up to one billion.
Required materials:
50 Abacus Bead
1 Abacus Frame
10 bamboo skewers
Glue
Print Settings
Printer:
Monoprice Maker Select V2 Rafts:
No Supports:
No Resolution:
0.2 Infill:
20%
Post-Printing
Thread bamboo skewers through beads and frame as seen in “Abacus for the Blind.” Glue in place. Remove excess. -
Ground Mount Cup Holder 3D Print Model
Summary
Got some event chairs and they didn’t have a cup holder so I made some that mount on or into the ground.
The 2 files top and bottom sections make printing simple and a bit of epoxy to join them after printing. -
TV Remote Holder 3D Print Model
Summary
Tired of having all my remotes lying around, so threw this together in Tinkercad. Print as many as you need and super glue them together. Change the width in Tinkercad to fit a particular remote. Doesn’t need rafts or supports.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
Std Infill:
Default 15% -
hand hard rock 3D Print Model
hand hard rock
