Summary
Just a simple Wall display for most 60% and under keyboards. sized to wall mount with large command strips. print 2.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
No Resolution:
.3 Infill:
15%
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
60% and under keyboard display 3D Print Model
-
Dyson to Progress hoover 3D Print Model
Summary
Waht to do with an dead old handheld Progress hoover.
Convert it to a dyson handheld for stair hoovering. -
Simple case for Raspberry Pi 3b 3D Print Model
Summary
Simple case for Raspberry Pi 3b.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20%
How I Designed This
I wanted to design my own case with a more organized pattern. -
Deadpool Head Keychain 3D Print Model
Summary
Awesome Deadpool Head Keychain, 3dprintable and assembled. Create your own at home!
Print Settings
Printer Brand:
Zortrax Printer:
Zortrax M200 Rafts:
Yes Supports:
Yes Resolution:
0.09 Infill:
low Notes:
x — 3.3 cm
y — 4 cm
z — 3.4 cm
Post-Printing -
Proximity sensor support 4mm 3D Print Model
Summary
Support for proximity sensor 4mm for https://www.thingiverse.com/thing:1496019 -
Cletic ring 3D Model
The ring with celtic ornamentthe ring is ready for 3d-printing and millingweight in 585 gold – 14gweigh in 925 silver – 11 g
-
Celtic earrings 3D Model
Round earrings with a celtic othe weight of one earring in 14k gold – 5g925 silver- 4 gFile is reade for 3d-printing and milling
-
GALAXY 3 PHONE COVER 3D PRINTABLE STL 3D Model
WELCOME TO 3DFORMATIONSYou are guaranteed precision component assembly with clean mesh and product lines for HIGH AND LOW POLY based model DATA.FULL SETUP READY TO RENDER FOR: (KEYSHOT) USERS ONLY.3D PRINTABLE SAMSUNG GALAXY PHONE COVER (GALAXY 3 PHONE COVER)FULLY TESTED & PRINTEDFULL SET OF STL FILES (READY TO 3D PRINT)YOUR DOWNLOAD FILE INCLUDESX2 3DSX2 IGESX2 OBJX2 3DMX2 STLX2 BIP KEYSHOT + MATERIAL MAPS + ENVRIOMENT MAPIMPORTANT: SETUP ROOT PATHS TO ALL MAPS (INCLUDED) FOR CORRECT KEYSHOT (RENDER) SETUP.PLEASE CHECK OUT MY OTHER MODELSCLICK ON MY USER NAME (3DFORMATIONS) AT THE TOP OF THIS PAGEFOR MORE INFORMATION GOOGLE (KEYSHOTS) ITS FAST EASY TO USE FOR STUNNING RESULTS
-
Deer 3D STL 3D Model
WELCOME TO 3DFORMATIONSYou are guaranteed precision component assembly with clean mesh and product lines for HIGH AND LOW POLY based model DATA.FULL SETUP READY TO RENDER FOR: (KEYSHOT) USERS ONLY.3D PRINTABLE FULLY TESTED IN RESIN FULL PARTS (STL) FILE INCLUDEDYOUR DOWNLOAD FILE INCLUDESX1 3DSX1 IGESX1 OBJX1 3DMX1 STLX1 BIP KEYSHOT + MATERIAL MAPS + ENVRIOMENT MAPIMPORTANT: SETUP ROOT PATHS TO ALL MAPS (INCLUDED) FOR CORRECT KEYSHOT (RENDER) SETUP.PLEASE CHECK OUT MY OTHER MODELSCLICK ON MY USER NAME (3DFORMATIONS) AT THE TOP OF THIS PAGEFOR MORE INFORMATION GOOGLE (KEYSHOTS) ITS FAST EASY TO USE FOR STUNNING RESULTS
-
Motor Bike Helmet Hanger 3D Print Model
Summary
This is a simple motor bike helmet hanger that can be used to hang a motor bike helmet.
How I Designed This
Design info
Some of the larger more spherical motor bike helmets can be hard to hang.
It also has a center pilot hole on the back in case you wish to screw in from behind. -
Chester “eye bone” 3D Print Model
Summary
Chesters eyebone!! based on the game don’t starve and made with fusion and a little tinkercad
you can find the fur at a craft store and if you have white PLA you won’t have to paint it I just wrote with a color sharpie for the eye and bone detail.
Print Settings
Printer:
Anet A 8 Rafts:
No Supports:
No Resolution:
i dont care what u do Infill:
3-5% -
Halloween tombstone stakes 3D Print Model
Summary
Replacement stakes for holding up Halloween tombstone decorations.
Two stakes per tombstone recommended.
For styrofoam tombstones – Insert the short pointed ends into the tombstone, and the long pointed ends into the ground. (These are usually solid, and the existing holes are fairly short.)
For plastic tombstones – Insert the long pointed ends into the plastic tombstone and the short pointed ends into the ground. (These are usually hollow, so the short end doesn’t provide enough support.)
Print Settings
Printer:
TronXY X1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% Notes:
Rotate to print flat on bed. I was able to fit two at a time on my 150×150 print bed -
1912 Ford badge.logo 3D Print Model
Summary
1912 Ford badge. please enjoy and tip your designer.
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.1 + Infill:
any, but the higher the better Notes:
for best result without the base plate use 80-100% infill -
Early rider pusher 3D Print Model
Summary
Push your child and his Early Rider bike using a hiking pole. -
Customizable Origami Sparrow 3D Print Model
Summary
This is a customizable 2D origami art of a sparrow. You can glue it into square picture frame (e.g. Ikea Ribba), use it as pendant, rings, earrings or just place it on a shelf…
Customizable Settings
Use the Customizer or OpenSCAD to create your own customized 2D sparrow.
You can set following paramters:
the max size of the longest side and the height
thickness of the outer and inner outline
Customizable Origami Series
This is part of my Customizable Origami series. Follow me, if you want to be informed about a new part of this series!
How to support me?
Do you like my things and do you want to support me? You can use these links if you want to buy something. This helps me doing more things. Thanks!
Banggood: https://goo.gl/ZXgx3A
Gearbest: https://goo.gl/FfE59f
Aliexpress: https://goo.gl/bQLi15
Print Settings
Printer:
Anet AM8 Rafts:
No Supports:
No Resolution:
0.2 Infill:
50% -
Tarot 680, DJI F450-550, Battery Holder 3D Print Model
Summary
This is a customizable case for drone’s battery. You have to print it as separate parts and then super glued all of them. I layout the parts like that for a better resistance to break.
I am going to use a rubber band to keep the battery in place, tie to the front holder
Pics on my Tarot 680 build are coming soon.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Resolution:
0.20 Infill:
25 Notes:
I am using a tempered glass, with Elmer’s violet stick school glue. And after each print I clean my print plate with isopropyl alcohol, the adhesion is very incredible. I also have my printer fully enclosured, much heat, the better.
Happy Print!!! -
Ween Boongish 3D Print Model
Summary
Went to a ween concert on Halloween. Figured this was necessary. -
Polygonal Iron Man printable figurine 3D Model
Made in polygonal style figurine based on Iron Man.Contains 3D printing file (stl)Can be nice way to fulfill your 3D project2k polys
-
Polygonal Statue Psyche printable 3D Model
Psyche StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece. Its cheaper to buy whole pack avalaible on my profile :)3D printing file. (stl)Nice way to fulfill your 3D project. Pack contains fbx and obj2k polys
-
Polygonal Statue Thinker printable 3D Model
Thinker StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece. Its cheaper to buy whole pack avalaible on my profile :)3D printing file. (stl)Nice way to fulfill your 3D project. Pack contains fbx and obj2k polys
-
Polygonal Statue Trajan printable 3D Model
Trajan StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece. Remember! Its cheaper to buy whole pack avalaible on my profile :)3D printing file. (stl)Nice way to fulfill your 3D project. Pack contains fbx and obj2k polys
-
Polygonal Statue Venus printable Free 3D Model
Venus StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece. Its cheaper to buy whole pack avalaible on my profile :)3D printing file. (stl)Nice way to fulfill your 3D project. Pack contains fbx and obj2k polys
-
Polygonal Classic Statues 10 printable figurines 3D Model
Polygonal Classic Statues 10 printable models packLow poly classic statues sculptures in modern polygonal style based on famous classic masterpieces.Contains 3D printing files. (stl)Nice way to fulfill your 3D project. (fbx, obj)each model have about 2k polys
-
Polygonal Irona Man printable figurine 3D Model
Made in polygonal style figurine based on Iron Man.Contains 3D printing file (stl)Can be nice way to fulfill your 3D project2k polys
-
Polygonal Statue Atalante printable 3D Model
Atalante StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece.Contains 3D printing file. (stl)Nice way to fulfill your 3D project. (fbx, obj)2k polys
-
Polygonal Statue Camillus printable 3D Model
Camillus StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece.Contains 3D printing file. (stl)Nice way to fulfill your 3D project. (fbx, obj)2k polys
-
Polygonal Statue David printable 3D Model
David StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece.Contains 3D printing file. (stl)Nice way to fulfill your 3D project. (fbx, obj)2k polys
-
Polygonal Statue Discobolus printable 3D Model
3d print Discobolus StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece. Remember! Its cheaper to buy whole pack avalaible on my profile :)3D printing file. (stl)Nice way to fulfill your 3D project. Pack contains fbx and obj2k polys
-
Polygonal Statue Mars printable 3D Model
Mars StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece.Contains 3D printing file. (stl)Nice way to fulfill your 3D project. (fbx, obj)2k polys
-
Thwo dragons without a gems and with other back side 3D Model
The pendant with a sword and two dragons.Dragons have two sides: a face side and back side.They are different. And dragons havent a gemsa Gems:4.5mm – 1weight in 14k gold – 18 gFiles are ready to 3d-printing and milling
-
Two dragons with other back side 3D Model
The pendant with a sword and two dragons.Dragons have two sides: a face side and back side.They are different.a Gems:4.5mm – 11.25mm – 11mm – 82weight in 14k gold – 16 gFiles are ready to 3d-printing and milling
-
Two dragons without gems 3D Model
The pendant with a sword and two dragons.Dragons have without a gems.Gems:4.5mm – 1weight in 14k gold – 20 gFiles are ready to 3d-printing and milling
-
Two dragons 3D Model
The pendant with a sword and dragonsFile is ready of 3d-print or millingGems:4.5 – 11.25 – 21 – 164weight in 14k gold – 16 g
-
jigsaw 3D Print Model
Summary
film, moviesStandards
NGSS
Overview and Background
Lesson Plan and Activity
Materials Needed
-
Large Ramps 1.4 Case – Right Handed Version 3D Print Model
Summary
You don’t have enough space with conventional ramps 1.4 cases? That’s all you need! Inspired by Dasaky’s Ramps case. This is the right-handed version of my previews Large Ramps 1.4 Case, it measures 100mmx150mm, plenty of space for wires management and heat dissipation.
Left-Handed Version: https://www.thingiverse.com/thing:2618146
Print Settings
Printer:
Prusa I3 like Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.25 Infill:
30% -
disney magic band 2 holder with ears 3D Print Model
Summary
kids don’t want to wear the disney magic band,
I found a design by GordonInnovations,
I add two ears, hope you like it. -
Teal Modular Addon System 3D Print Model
Summary
Following the quick-swap, modular mentality of the Teal Sport, this ‘thing’ is a modular addon system that allows for modules to be snapped into the top and bottom of the drone. A few addon modules are shown here, but the possibilities are endless.
Rocket Launcher
The rocket launcher module attaches two rockets beneath the drone. The rockets shown are based on the 1/4A rocket motor. Launch control is handled by an arduino and some supporting circuitry (an Arduino is overkill, but it’s simple to show). Launch could be triggered through an additional radio or by detecting certain movement patterns with an accelerometer.
…standby for more modules!
Note: I do not own this drone so exact dimensions may need tweaking. If I win this contest, I will for sure be fleshing out and building the rocket launcher 🙂 -
Squid Jig size 3.0 3D Print Model
Summary
This is my design for a size 3.0 squid jig.
Print Settings
Printer Brand:
RepRap Printer:
RepRap Kossel Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
10% Notes:
Use glow in the dark PLA for better performance at night.
Post-PrintingThe first thing to do is to print the parts, and get the other hardware together.
You will need:
Wire for the nose ring (I used stainless lock wire)
Lead for the keel weight. You can use a sinker, or any lead really, bash it into shape. This needs to weigh around 4 grams.
Barb crown for the tail. You can either cut up a small pencil jig, or get a new set of barbs.
The best I’ve found are Harimitsu brand, you can get these here: http://www.fishonproshop.com.au/fishonproshop/SelectProd.do?prodId=657The parts go together like this.
Glue the two halves together, with the nose ring and lead keel in place. Leave the barbs out for now, you can put them in later.
Have fun with masking out the lure and painting it. Ensure that you sand the layer lines off before painting.
Glue the eyes in after painting. I print the eyes in black filament, so that there is less to paint. You can use whatever colour you like, obviously.
After painting, you can cover the lure in a layer of clear epoxy. Keeping the lure rotating for a couple of hours can keep the coat more even, and eliminate drips. This is a simple setup to keep the lure rotating while the glue cures.
Finally, glue in some feathers and the barb at the back, and you’re ready to catch some squid! -
Caja Fallera Calavera (con fundas) + expansión 3D Print Model
Summary
Caja fara la fallera calavera y fallera calavera 2, diseñada para cartas enfundadas.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Yes Resolution:
Any Infill:
Any -
Beer Stein 3D Print Model
Summary
Being Recently engaged, I needed something special to give my groomsmen-to-be that really embraced two of my passions, beer and 3D printing!
I’ve printed 9 total.. plan on adding pictures of the finished product at some point.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.3 mm Infill:
25% Notes:
3 perimeters (since they’ll possibly be holding liquid)
Printed at 0.7 scale. I designed it big but scaled it down to cut print time. -
tablet holder 3D Print Model
Summary
thank you so much for all your support and here it is my 6th design holds two tablets or other small devices -
Tacti-Cool Silly String Gun 3D Print Model
Summary
Behold the mighty Silly String Gun!
Still a WIP so feedback welcome.
Trigger: Print on its side for maximum strength
Stock: Print on the Butt
Receiver: Print vertical with handle touching build plate and support
Barrel: Print vertical with front touching build plate
Support: Enable ‘support touching build plate’ for all parts. (Part to part support is not necessary)
Because the can is horizontal, its probably not the most efficient use of propellant, so I may make another version that holds the can at a 45 in a ‘magazine’ position
Here is the Silly String I designed this for (FYI, its larger than your typical dollar store cans)
-
Polygonal Statue Achilles printable 3D Model
Achilles StatueLow poly classic statue sculpture in modern polygonal style based on famous classic masterpiece.Contains 3D printing file. (stl)Nice way to fulfill your 3D project. (fbx, obj)2k polys
-
Womens ring with a diamond 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 5,700 gramweight in gold silver 3,700 gram
-
Dual Flashlight Picatinny Attachment 3D Print Model
Summary
This attachment uses 2 1$ Walmart flashlights. The attachment is held on a rail with a 6-32 x 1 1/4 in machine bolt and a matching nut.
Print Settings
Printer:
JGAurora A3 Rafts:
Yes Supports:
Yes Resolution:
0.2mm Infill:
100%
Post-Printing -
Cricut Air Adapter for fine point Sharpie (easy) 3D Print Model
Summary
Quick easy print to adapt a fine point sharpie into a Cricut air, a few others out there but thought i would try to make an easy to print one, only takes about ~10min.
I had some difficulty getting the inside diameter right, it need to be 10.7mm, but when I made it with that size, it ended up being 10.4mm, which is to small. I’m using a 0.4mm nozzle, so that might have something to do with it, as the outside is 14mm and it came out right.
Print Settings
Printer:
Anet A6 Rafts:
No Resolution:
0.25 Infill:
20%
Post-Printing
none hopefully. -
Hitman Paperweight 3D Print Model
Summary
Just a simple paperweight based on the Hitman series that I made when I was bored. Haven’t gotten around to printing it yet. -
Under-Desk Hook for 30mm desktop 3D Print Model
Summary
A sturdy hook for hanging jackets, bags, purses, etc. underneath a desk with a 30mm thick top (which is pretty standard). The current size slides on and off the desk easily with a close fit. If you are looking for a perfect/tight fit on a 30mm thick desktop, scale the piece to 99% and you should have a snug fit.
Feel free to remix this to fit your needs. I don’t care if you print some and sell them, just mention me in the design credits.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
The curves on the design help to reduce the chance your corners will peel up while you are printing. Plus, they look better. -
Balisong latch 3D Print Model
Summary
A replacement latch for a balisong knife also known as butterfly -
Park Zone Spitfire MKIV Gear Fairing 3D Print Model
Summary
Gear fairing for discontinued Parkzone Spitfire MKIV. Mirror object to obtain a left and right cover. Sand openings for gear wire if they do not clip on easily or break. -
Key for tap 3D Print Model
Summary
This “key” allow to open tap without head (like on the picture).
Freecad file included -
Spool Holder 97 mm 3D Print Model
Summary
This is an adaptation of Hictop spool holder for an Sehi3D AiP 3D printer!!! -
PCB Etching with 3D Printer Agitatior 3D Print Model
Summary
I made Tech2C’s Pen holder https://www.thingiverse.com/thing:2459624
I used it on my Milling machine to apply sharpie ink as an etch resist.
Then I used my 3D printer to heat and agitate the Ferric Chloride solution with the pcb in it.
GCODE
g1 y0 f4000
g1 y50
g1 y0 f200
g1 y50
make many copies of this. Takes about 15 seconds to execute.
You can see the sample pcb traces that I produced using this technique. I would increase the overlap of the sharpie lines and print twice to ensure a good resist. the thin lines were just one layer of sharpie. they worked but got a little undercut.
I will add a video later showing the etching setup.
I found that setting my bed temp to 100C kept the Ferric Chloride solution below the recommended 55C maximum with my plastic tray which is pretty thick.
If anyone has a great way to get pcb gerbers into Fusion 360, please message me or comment on this thing -
Weight Hanger & Pulley Assembly 3D Print Model
Summary
This is a pulley and weight hanger assembly suitable for use in a physics classroom. Designed for use with SimpleSumo robots: https://www.thingiverse.com/thing:2574286
On this setup I recommend using pennies for weights because they are standard small equal units of weight, easily available, and cheap.
The pulley uses one 608 bearing. This link is for a fidget spinner bearing which will spin with the least resistance, although you will have to protect it from dirt: http://amzn.to/2xBN9xF
Uses one 5/16″ bolt to hold the assembly together.
Video of experiment involving this pulley setup shown at 6min 18 sec:https://youtu.be/JAGPEJZuJWw -
1407 Cobra motor mount 3D Print Model
Summary
This is for a specific application, but I figured someone might find it useful.
Print Settings
Printer:
AM8 (rebuilt Anet A8) Rafts:
No Supports:
No Resolution:
.2 Infill:
25 Notes:
I printed with 3 perimeter layers. If you only use 2, then you might need 100% infill. -
St. Dupont lighter Gas Refill Adapter 3D Print Model
Summary
This is an adapter to refill a St. Dupont lighter with gas.
If you like it and like to show some love, than please share it or add it to your list.
Enjoy ! 🙂
JoeyHills.de
3Dsection.de -
![Moving Alien Chestburster Halloween Costume [No Support, Easy Assembly] 3D Print Model](https://3dhunt.co/static/2017/10/8b8a0d7992b0020d7864fc77f6af0a08.jpeg)
Moving Alien Chestburster Halloween Costume [No Support, Easy Assembly] 3D Print Model
Summary
This is an easy to print, and fully functional Alien Chestburster Halloween custom.
You just need to print the mechanism and the head, clip together, take a belt and knot a fishing line or in my case a Waxed Denteal Floss onto its place and read to scare!
Here you can see how easy is that:https://youtu.be/iz7sXwunJf8
And in action:https://youtu.be/gxmnxGZeG2o
Print Settings
Printer:
Anet A6 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
10% Notes:
0.4mm nozzle
240°C PETG
60°C heated bed
60% cooling fan
30 mm/s print speed
2mm Z hop when rectract. (My retraction was not the best, thats why I’ve got many strings, if your retraction tuned well, than the separation will be even easier than in my case, as you seen on the video)
I printed my model from PETG, becase of the higher durability.
With PLA not tested yet!
For the head I used 10% infill till the throat part to be some support for it, after that just 3 walls and 5 solid top layers has been used.
For the mechanism I’ve just used 3 walls and 5 top and buttom solid layers and no infill.
How I Designed This
The base idea came form the Platform Jack, but I have redesigned the whole thing from scratch and optimised it till I got this version. It looks really complex from a close view, but every little detail has a function. -
Solderless modulable 18650 Battery holder for 4 batteries 3D Model
modulable 18650 Battery holder for 4 batteries with holes for mounting solderless electrical terminals solderless, using nuts and bolts, modules can be joined and unjoined with ease , many 3d file formats can be donwloaded.can be used for your DIY projects such as e-bikes, boosted boards, RC, etc…
-
Halloween bong 3D Model
It is fully working bong, the water tank is in the skull. Recommendet skale is cca.150-170% and infill cca 10%, wall thickness should be at least 1mm ( make sure it is water tight) also put a little higer hotend temperature for better adhesion.With little paint job it is perfect gadget for halloween party.
