Сigarette case with a latch for a standard pack of cigarettes (20 cigarettes) – 90x55x23mmEnjoy!
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
CUP 3D Model
3D Model of Cup 3D print modelThis is a cup to print in 3D, it will allow you to store pens or something else!Height: 100mmDiameter: 100mm
-
Artist Paint Tube Separators 3D Print Model
Summary
I added a narrow shelf to the lid of my pochade box so I can place two rows of paint tubes cap down, and not have them falling all over the place as they used to… -
Amiibo Stand System – With Connectors 3D Print Model
Summary
Amiibo were taking over the house, so I decided to do something about it!
First, I made a beautiful stand:
https://www.thingiverse.com/thing:2613221
Which was based on a fantastic guide:
https://imgur.com/gallery/P68cT
I went to print it out, and it was hilariously larger than the maximum size of my FFCP 2016.
So then, I did what any engineer would do: I sketched out a modular system!
Originally, as a test, I made a no-connector (connectorless?) system, that you could use to make your own base, using glue or tape to stick things together:
https://www.thingiverse.com/thing:2625743
That was cool, and it allowed me to test the blocks/modules to make sure they’d print right, look good, and hold Amiibo properly. I’m sure some folks will be happy with the connector-free modules, and will simply use super glue or tape to hold things together.
Me, I knew I wanted something with connectors. I like curves, but I realized that circles are fully symmetrical, and would allow rotation. These should go together perfectly at right angles, 180°, so I decided on a two-way keying system (because one-way is annoying) in the oval. You can connect these right-side-up or upside-down, but that’s about it. If you wanted something a little more fool-proof, I could probably do a system that had a softened (curved point) triangle, which would allow for only one real way (the other ways would not be at 90° angles). I could even put in an asymmetrical hole but, honestly, that’s just getting too confusing. Plus, these modules are symmetrical, so you can rotate them, and use them however.
There are six different types of modules, in three different heights.
The types of modules are: no holes, one hole, two corner holes, two opposite holes, three holes and four holes. Obviously, the “no holes” won’t connect to anything unless you’re willing to use glue, tape, or for something stand-alone. I promise I won’t judge you! Obviously, the other five modules are for connecting with the provided “rods.” The “tight rod” feels like a porn star name. It’s not. Printed at Medium (0.2mm) layer height, it’s a snug fit. You may have to clean up the end(s) a little bit, but in mine, I just had to give a little pressure and the rod slid into the hole no problem. If one side is tighter, press that side in manually first, and then slide the other module into the looser rod end. That should make things easier.
I was playing with a “max” sized height (maximum Z height of the FFCP 2016 edition), but realized most folks are going to want to start out with the low, medium and high designed here. I used the Fibonacci sequence (Golden Ratio), to design the heights, widths and lengths. I enjoy good design, and hope you find these visually appealing.
I will share my sketch later, so you can see how I originally intended for this to be used. It’s a free-form sketch, so don’t judge me or my artistic ability!
If you make one of these, please share a Make here. I love to see what people do with my Things. Seriously!
If you have a suggestion, comment or question, please leave a comment somewhere on this Thing. I try to take suggestions and make them a reality. One of the ideas I had originally was to make a two-by on the top, so you could have a larger margin/area to display some of the “fatter” Amiibo, while still looking good. I may share/print the “max” size items, but we’ll see how I feel. I think the three-tier system works fairly well, but at some point, when you get out to eight or nine wide, a fourth layer might make it look better than just the three. We’ll see.
< soapbox > As an aside, my brother took his life last week, and this is a way for me to keep busy before the funeral. I like to celebrate and enjoy life. If you aren’t enjoying what you’re doing, do something else. If you’re depressed, seek counseling. Suicide is never the answer. It leaves behind a metaphorical and physical mess that someone else has to clean up. Selfish and shitty. If you can’t stick around for yourself, stick around for friends, family, your pets, the nice cashier at the grocery store who always smiles at you, the waitstaff at your local restaurant, the police who will have to investigate the scene, and the coroner who will have to take you apart. Suicide sets in motion a huge series of events that you won’t have to be around to deal with. But none of those events are fun. Talk to someone. There are always options. < /soapbox > -
Raspberry Pi2/3 Portable 3D Print Model
Summary
Remove the top cover can do other applications.
Build a handheld game console that you can find HERE: https://ken77kuo.blogspot.tw/ -
Lifestraw Bottle Adapter 3D Print Model
Summary
Remixed to add an adapter for a hose to a water badder so that it can be used as a gravity filter (ie. sawyer squeeze or mini). -
Celtic ring 3D Model
The ring with celtic ornamentthe ring is ready for 3d-printing and millingweight in 585 gold – 14gweigh in 925 silver – 11 g
-
CR-10 Dual Z Pulley Setup 3D Print Model
Summary
As requested here are the files for the dual Z setup I recently set up. One of my main design goals was to not use any set screws. Here are the specific parts I used.
T8 600mm 3D Printer Stainless Steel Lead Screw Coupling Shaft Mounting Bearing
Link: http://r.ebay.com/eVLz50
BIQU GT2 Synchronous Wheel 60 Teeth 8mm Bore Aluminum Timing Pulley for 3D Printer 6mm Width Belt (Pack of 2pcs)
BIQU
Link: http://a.co/eORAb49
BIQU GT2 20Teeth 3mm Bore Aluminum Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)
BIQU
Link: http://a.co/iPQ3g65
Uxcell a16031400ux0530 3D PRINTER 2GT-6 Ring Closure Timing Belt Closed 852mm Circumference, HSS
uxcell
Link: http://a.co/bhJZ4WH
Print Settings
Printer:
Hictop CR-10 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2mm Infill:
50% -
Watch Porto (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2y5KMzk
WATCH: http://tinyurl.com/yc6avgu6
Sinopsis :Jake and Mati are two outsiders in the northerly Portuguese city of Porto who once experienced a brief connection. A mystery remains about the moments they shared, and in searching through memories, they relive the depths of a night uninhibited by the consequences of time.
Cast: Lucie Lucas, Anton Yelchin, Paulo Calatré, Françoise Lebrun, Chantal Akerman
Genre: Romance, Drama
Production:
Keyword:
Watch NOW!! Porto (2017) Full Movie, Watch Porto (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee Porto (2017) Online Free Full Movie ~ Porto (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ Porto (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, Porto (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario Porto (2017) will get a Big fans on the world. Online Dailymotion, Porto (2017), download 5Shared, Porto (2017), Online HD 700p, 1080p Fast Streaming Get free access to Porto (2017) movie, with excellent audio/video quality and virus free interface, Porto (2017) online at ultra fast data transfer rate, cost-free, virus-free access , with maximum speed, you immediately Porto (2017) , or download Porto (2017) , here, follow the ling below and hopefully you satisfied Watch full stream Porto (2017) , Series for Free Online. Streaming Free Films to Watch Online including Series Trailers and Series Clips. Porto (2017) , Quick Links. Watch TV Series online Porto (2017) , Full Episode, Porto (2017) , Online Youtube, Porto (2017) , Online Dailymotion, Porto (2017) , download 5Shared, Online HD 70p-1080p Fast Streaming, Tag : Porto (2017) , Porto (2017) , Porto (2017) Full, Porto (2017) Movie, Porto (2017) Streaming, Porto (2017) Online, Porto (2017) 2015 Full Movie, Porto (2017) Movie Online, Porto (2017) Download, Porto (2017) Full Movie, Porto (2017) Straeming full free, Watch: Porto (2017) HD 1080p, Watch: Porto (2017) HDQ, Watch: Porto (2017) Megavideo, Watch: Porto (2017) Tube, Watch: Porto (2017) Download, Watch: Porto (2017) Megashare, Watch: Porto (2017) Youtube, Watch: Porto (2017) Viooz, Watch: Porto (2017) Putlocker, Watch: Porto (2017) instanmovie, Watch: Porto (2017) Dailymotion, Watch: Porto (2017) IMDB, Watch: Porto (2017) MOJOboxoffice, Watch: Porto (2017) Torent, Watch: Porto (2017) HIGH superior definitons, Watch: Porto (2017) Mediafire, Watch: Porto (2017) 4Shared, Watch: Porto (2017) Full Movie, Watch: Porto (2017) Full, Watch: Porto (2017) Streaming Full, Watch: Porto (2017) HDQ full, Watch: Porto (2017) Download Sub Porto (2017), Watch: Porto (2017) Sub Porto (2017) English, Watch: Porto (2017) Download Full, Watch: Porto (2017) Streaming, Watch: Porto (2017) English Film Free Watch Online, Watch: Porto (2017) English Full Movie Watch Online, Porto (2017) Full Movie Online, Porto (2017) Full Movie Online Free, Porto (2017) English Film Free Watch Online, Porto (2017) English Film Live Steaming, Porto (2017) English Full Movie Watch Online, Porto (2017) English Full Movie Mojo Watch Online, Porto (2017) English Full Movie Watch Online, Porto (2017) Watch Online Full Free, Porto (2017) English Full Movie Download, Porto (2017) English Full Movie Free Download, Porto (2017) English Full Movie Online Free Download, Porto (2017) HD Full Movie Online, Porto (2017) HD English Full Movie Download, Porto (2017) English Full Movie, Porto (2017) Full Movie Watch Online, Porto (2017) English Full Movie Watch Online, Porto (2017) Movie Watch Online, Porto (2017) English Full Movier, Porto (2017) English Full Movie Online -
Watch Holy Air (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2heYugb
WATCH: http://tinyurl.com/yarceymp
Sinopsis :Adam is a Christian Arab living in Nazareth – member of a vanishing minority within a minority in the Holy Land and the Middle East. His wife Lamia is a strong, beautiful and progressive Arab woman, who runs a foundation for women’s rights.
Cast: Laëtitia Eïdo, Shady Srour, Shmulik Calderone, Tarik Copti, Dalia Okal, Byan Anteer
Genre: Comedy
Production: Cinema Virgin, Tree M Productions
Keyword:
Watch NOW!! Holy Air (2017) Full Movie, Watch Holy Air (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee Holy Air (2017) Online Free Full Movie ~ Holy Air (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ Holy Air (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, Holy Air (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario Holy Air (2017) will get a Big fans on the world. Watch, “.Holy Air, “.2017, “”Online, “.Free, “.|, “.Full, “.Movie, “.Watch, “.Holy Air, “.Online, “.Stream, “.Full, “.Movie, “.Free, “…Download, “.HD, “.Watch, “.Holy Air, “.2017, “.1080p, “.720p, “.Watch, “..Holy Air, “.2017, “., Full, “.Online, “.Movie, “.Watch, “.Holy Air, “.Online, “”Holy Air, “.Full, “”Movie, “”, Holy Air, “.Movie, “.2017, “.One, “.Click, “.Link, “.Below, “.You, “.Can, “.Watch, “.Holy Air, “.Full, “.Free, , Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.2017, “”Holy Air, “.Movie, “.2017, “.Full, “.Movie, Watch, “.Holy Air, “.2017, “.Online.Watch, “.Holy Air, “.2017, “.:, “.Online, “”Watch, “.Holy Air, “.Online, “.Free, “”Holy Air, “.2017, “.Online, “”Holy Air, “.Online, “”Watch, “.Holy Air, “.Streaming, “”Watch, “.Holy Air, “.Online””.Watch, “.Holy Air, “.Prayer, “.For, “.the, “.Dying, “”Watch, “.Holy Air, “.Streaming, watch, “.Holy Air, “.Online””.watch, “.Holy Air, “.Online, “.Stram, “”watch, “.Holy Air, “.2017, “.Online, “”watch, “.Holy Air, “”watch, “.Holy Air, “.2017, “”Holy Air, “”Holy Air, “.2017, “”Watch, “.Holy Air, “.Online, “”Holy Air, “.Live, “.Stream, “”Watch, “.Holy Air, “.Full, “.Movie, “.Online, “.Now, “”Holy Air, “.Live, “.Streaming, “.Free, “.come, “.to, “.Holy Air, “.For, “.Online, “.Full, “.HD, “.2017, “”watch, “.full, “.Holy Air, “.vid, “.Online, “”Holy Air, “.2017, “.Online, “.Free, “”[HD, “.Video], “.Online, “.and, “.Free, Holy Air, “.Stream, “”Watch, “.Movie, “.on, “.Holy Air, “.Online, “.Watch, “.TV, “.Series, “.Online, “.Holy Air, “”Full, “.Movie, “”Watch, “.Holy Air, “”Online, “.Youtube, “”Watch, “.Holy Air, “”Online, “.Dailymotion, “”Watch, “.Holy Air, “”Online, “.couchtuner, “”Full, “.Movie, “.to, “.Holy Air, “.Online, “.(2017), “.’Movie, “.2017′, “.Full, “.HD, “.Stream, “.You, “.can, “.watch, “.Streamof, “.Holy Air., Watch, “.Holy Air, “.Stream, “.Full, “.Online, “.2017, Watch, “.Holy Air, “.Online, “.Free, “”Watch, “.Holy Air, “.TV, “.Series, “.Online, “”Download, “.Watch, “.Holy Air, Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, “.Full, “.Movie’s, “.HD, “”””Watch, “.Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, “.for, “.free, “”””Holy Air, “.Movie, “.2017, “.-, “.Movie, “.2017, Holy Air, “.Online, “.Movie, “.2017, “.Movie, “.2017, “.Stream””.Watch, “.Holy Air, “.Online, “.2017, “.Stream””.Watch, “.Holy Air, “.””.Watch, “.Online, Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, “”Holy Air, “.Full, “.Movie, Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, “”Holy Air, “.(2017), “.Full, “.Movie, Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full, “.Movie, “”Download, “.Holy Air, “.Full -
Dual 5.25 Bay Computer Reservoir (BETA) 3D Print Model
Summary
This is a dual 5.25 bay computer water reservoir getting remixed from what i saw CodonExe do except i was greedy and wanted more water capacity. I even incluced my Blender files if any one wishes to continue my work on this project. I wouldnt even dare to print this yet! As files will be changing constantly till i see fit for use. This is a very crude start. -
Watch The Light of the Moon (2017) Full Movie Streaming Online in HD-720p 3D Print Model
Summary
DOWNLOAD: http://bit.ly/2y5FBj3
WATCH: http://tinyurl.com/ycr4qmaa
Sinopsis :After a New York City woman is sexually assaulted while walking home one evening, she struggles to accept the truth and rediscover the intimacy within her relationship.
Cast: Stephanie Beatriz, Michael Stahl-David, Conrad Ricamora, Catherine Curtin, Olga Merediz, Cindy Cheung, Susan Heyward, Craig Walker, Cara Loften, Michael Cuomo, Sarah Dacey-Charles
Genre: Drama
Production:
Keyword: #secret #architect #new york city #woman director #sexual assault
Watch NOW!! The Light of the Moon (2017) Full Movie, Watch The Light of the Moon (2017) Full Movie Free Streaming Online with English Subtitles ready for download. Film BoxOfficee The Light of the Moon (2017) Online Free Full Movie ~ The Light of the Moon (2017). Full Movie Free Streaming Online with English Subtitles, prepared to download ~ The Light of the Moon (2017) 720p, 1080p, Brrip, Dvdrip, Camrip, Telesyc, High Quality, No Buff, Box Office movies, The Light of the Moon (2017) had a considerable measure more to love than scorn. None of that in this crisp advertising. Best case scenario The Light of the Moon (2017) will get a Big fans on the world. Watch, “.The Light of the Moon, “.2017, “”Online, “.Free, “.|, “.Full, “.Movie, “.Watch, “.The Light of the Moon, “.Online, “.Stream, “.Full, “.Movie, “.Free, “…Download, “.HD, “.Watch, “.The Light of the Moon, “.2017, “.1080p, “.720p, “.Watch, “..The Light of the Moon, “.2017, “., Full, “.Online, “.Movie, “.Watch, “.The Light of the Moon, “.Online, “”The Light of the Moon, “.Full, “”Movie, “”, The Light of the Moon, “.Movie, “.2017, “.One, “.Click, “.Link, “.Below, “.You, “.Can, “.Watch, “.The Light of the Moon, “.Full, “.Free, , The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.2017, “”The Light of the Moon, “.Movie, “.2017, “.Full, “.Movie, Watch, “.The Light of the Moon, “.2017, “.Online.Watch, “.The Light of the Moon, “.2017, “.:, “.Online, “”Watch, “.The Light of the Moon, “.Online, “.Free, “”The Light of the Moon, “.2017, “.Online, “”The Light of the Moon, “.Online, “”Watch, “.The Light of the Moon, “.Streaming, “”Watch, “.The Light of the Moon, “.Online””.Watch, “.The Light of the Moon, “.Prayer, “.For, “.the, “.Dying, “”Watch, “.The Light of the Moon, “.Streaming, watch, “.The Light of the Moon, “.Online””.watch, “.The Light of the Moon, “.Online, “.Stram, “”watch, “.The Light of the Moon, “.2017, “.Online, “”watch, “.The Light of the Moon, “”watch, “.The Light of the Moon, “.2017, “”The Light of the Moon, “”The Light of the Moon, “.2017, “”Watch, “.The Light of the Moon, “.Online, “”The Light of the Moon, “.Live, “.Stream, “”Watch, “.The Light of the Moon, “.Full, “.Movie, “.Online, “.Now, “”The Light of the Moon, “.Live, “.Streaming, “.Free, “.come, “.to, “.The Light of the Moon, “.For, “.Online, “.Full, “.HD, “.2017, “”watch, “.full, “.The Light of the Moon, “.vid, “.Online, “”The Light of the Moon, “.2017, “.Online, “.Free, “”[HD, “.Video], “.Online, “.and, “.Free, The Light of the Moon, “.Stream, “”Watch, “.Movie, “.on, “.The Light of the Moon, “.Online, “.Watch, “.TV, “.Series, “.Online, “.The Light of the Moon, “”Full, “.Movie, “”Watch, “.The Light of the Moon, “”Online, “.Youtube, “”Watch, “.The Light of the Moon, “”Online, “.Dailymotion, “”Watch, “.The Light of the Moon, “”Online, “.couchtuner, “”Full, “.Movie, “.to, “.The Light of the Moon, “.Online, “.(2017), “.’Movie, “.2017′, “.Full, “.HD, “.Stream, “.You, “.can, “.watch, “.Streamof, “.The Light of the Moon., Watch, “.The Light of the Moon, “.Stream, “.Full, “.Online, “.2017, Watch, “.The Light of the Moon, “.Online, “.Free, “”Watch, “.The Light of the Moon, “.TV, “.Series, “.Online, “”Download, “.Watch, “.The Light of the Moon, The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, “.Full, “.Movie’s, “.HD, “”””Watch, “.The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, “.for, “.free, “”””The Light of the Moon, “.Movie, “.2017, “.-, “.Movie, “.2017, The Light of the Moon, “.Online, “.Movie, “.2017, “.Movie, “.2017, “.Stream””.Watch, “.The Light of the Moon, “.Online, “.2017, “.Stream””.Watch, “.The Light of the Moon, “.””.Watch, “.Online, The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, “”The Light of the Moon, “.Full, “.Movie, The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, “”The Light of the Moon, “.(2017), “.Full, “.Movie, Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full, “.Movie, “”Download, “.The Light of the Moon, “.Full -
Sagiri – Eromanga Sensei 3D Model
Works in zbrush and prints without problems-There is no texture mapping-
-
Candle Holder 3D Model
This is a holder for tealights (diameter 40 mm).height: 32 mmThe file is in STL format and you will be able to print it.
-
Fantasy Beast 3D Model
High poly figure of fantasy beast.Meters was used us measure units. It is about 2.15 meters in height.File contains one manifold mesh object. There is no bad contiguous edges and no lose parts.Available formats: .fbx, .obj, .3ds, .blend, .stl.Face count: 962172For .3ds there is 64656 faces
-
BETAFPV 1S LIPO CHARGER AND BATTERY HOLDER 3D Print Model
Summary
The time has come to start switching over to indoor flying in my neck of the woods. This item Holds the BETAFPV 1S lipo battery charger with storage for both charged and uncharged batteries and a few spots for misc items.
Charger has a nice snug fit and will not fall out of holder.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.100 – .300 Infill:
100% Notes:
easy print, not real clean up needed after print.
Post-Printing
No clean up is really needed, use a color paint marker if you want to add color to the text.
How I Designed This
Fusion 360 -
Mini Puzzle Cube 3D Print Model
Summary
This is a fun 5 piece 3 x 3 puzzle cube.
Print Settings
Printer:
Mp Select Mini II Rafts:
No Supports:
No Resolution:
.1 Infill:
20% Notes:
I would recommend printing the models at 2 x scale if you want to use it. The size the stl files are now are useable but a little small.
Post-Printing
After printing I colored the pieces with sharpie to add some contrast.
How I Designed This
I had first sketched it out on grid paper. Then I modeled the pieces in Fusion 360. -
Dice set for D&D 3D Print Model
Summary
As I could not find a good complete set of seven RPG dice, I scaled and collected the best dice I could. -
Ring with a diamond 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 2,800 gramweight in gold silver 1,900 gram
-
PocketBeagle Case (Rev A2) 3D Print Model
Summary
Just another case for the BeagleBone.org PocketBeagle A2.
Insert a μSD card into the PocketBeagle. Test that the image/board combination works before continuing. Power down.
Place the PocketBeagle into the case and carefully press (minding the USB port) it down past the retainer bars on both sides.
Put the cap on the case and use. -
remix of MrCrankyface by Flyon20s axles middle axles with servo mounts 3D Print Model
Summary
I wanted to build an 8×8 Hemmt. I am new to 3d design so I didn’t want to get into designing gears so I found the mid axles and adapted them for leaf springs and made them longer because my vehicle is wide. I did not have room to put my servos on the frame so I added a mounting plate on the tops. they need tweaking because my turning radius is horrible. I was going to wait till got it working perfect. I will be posting the Hemmt frame and body soon.
Print Settings
Printer:
anet A8 Rafts:
No Supports:
No Resolution:
.02 Infill:
20% Notes:
I printed the half shafts at 100% just for extra strength might not be needed. -
Thor Ragnarok Swords 3D Print Model
Summary
Woo!
One day late, BUT, they’re finally finished! Both swords, screen accurate (as far as I can tell) and fully printable. As with all my swords, they take a metal support rod, 3/16″, that is slotted down the middle. A real passion project of mine. I hope you all enjoy!
Please print and show me if you love it and are faster than me, my printers are kind of slow and old.
Please leave a like and follow me if you want to see more cool stuff like this.
I will also soon be streaming on twitch.tv/polygonaut
Cheers! -
Black and Decker Workmate Bench Top replacement Block 3D Print Model
Summary
Lost some of these on my workmate over the years so modeled one up and printed. Works well.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Yes Supports:
Yes Resolution:
.1 Infill:
50% -
Case for ELECROW 5 inch LCD RPA050105 3D Print Model
Summary
This case is for Elecrow’s (waveshare) 5 inch lcd screen. This is part of a project to create modular components for a portable handheld gaming system. This way novices can assemble any models they want to use and essentially “snap” them together to quickly prototype. The Fusion 360 project file with all the sketches step by step instructions for creating the model (so that you can easily modify it). This is released under the public domain license so you can use it for reference, modify, or incorporate it into your project and sell it.
Fusion 360 project file:http://a360.co/2hgJZIF
I bought mine on Aliexpress, but here’s an amazon link to the screen.https://www.amazon.com/Elecrow-RPA05010R-800×480-Display-Raspberry/dp/B013JECYF2 -
Castle wall 3D Model
High poly Castle wall.File contains one manifold object. No loose parts, no bad contiguous edges.Measure units: metersIt is about 10 cm in Height.Faces count: 792698
-
Shuriken Hand Spinner 3D Print Model
Summary
Shuriken hand spinner. bearing 608 + 7 balls 9.5mm (3/8 inch)
How I Designed This
Fusion360 -
ADT Night Alarm Cover 3D Print Model
Summary
The alarm panel in the bedroom is really bright at night and I always end up covering it with an item of clothing. So I decided to make a better fix for this problem. The cover is for an ADT alarm screen and only covers the screen so the buttons are still usable. The design is made to wedge in the sides as there is no top lip above the screen to latch too.
Hope this makes your room darker like mine and you get a better night sleep. 🙂
The print on high quality took 25 mins.
Print Settings
Printer:
Raise N1 Rafts:
Doesn’t Matter Supports:
No Notes:
Very quick print -
door handles 3D Print Model
Summary
i make 4 door handle to use on drawers
in french
j’ai réalisé 4 poignées pour des tiroirs
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
15% -
lissajous spirograph 3D Print Model
Summary
This is a code by a french mathematician from Thingiverse, except I can’t find their name and page. The cube goes flat with nbr = 4 and 6 10 14 18 22 -
Led lamp holder 3D Print Model
Summary
Led lamp holder for this led lamp:https://www.amazon.it/gp/product/B01HO2OIHW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Made in two parts. -
Octopus Stand V3 portable 3D Print Model
Summary
It’s a remix from notcolinforreal’s Octopus Standhttps://www.thingiverse.com/thing:607518
Put a hole on it to make it portable.
Print Settings
Printer Brand:
Zortrax Printer:
Zortrax M200 Rafts:
Yes Supports:
Yes Resolution:
0.14 Infill:
Mediem -
AR-15 Silhouette 3D Print Model
Summary
I love making silhouettes here is an AR15 silhouette
Print Settings
Printer:
CR10 Rafts:
No Supports:
No Resolution:
0.3 Infill:
100 -
Wizard101 – Bengal Tiger 3D Print Model
Summary
This is straight from the game’s files.I smoothed it out in 3ds Max, so it looks a bit more smoother than the one in the game.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
.2 Infill:
10 Notes:
Be careful with the supports. I printed it in the position that it is in the stl file, and the legs broke off (had to superglue it). The tail snapped off as well, but I left it out in the pictures because I thought it looked better without it. -
Rocket 3D Print Model
Summary
A simple rocket. I give credit to Tinkercad for the software in creating this. -
Feiyue FY-03 1/10 mg995 servo mount 3D Print Model
Summary
This is a vertical adapter for the Feiyue FY-03 to fit a TowerPro mg995
You need to mark out and drill/melt 3 new holes in the base of the car to fit this new mount for your steering servo. (I have no phone at the moment, pics will be added soon.)
Freecad included -
Fiat-Garmin mount 3D Print Model
Summary
Perfect for my Fiat Punto. Matching steel spring (from a ballpoint pen) is needed.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0,2 -
Modified R_Z_Top bracket 3D Print Model
Summary
Modified R_Z_Top bracket, moved the Stepper bracket to the far right to so that my ‘Oldham’ does not foul the X Carriage. -
Xeon Phi passive-to-active cooling adapter 3D Print Model
Summary
This is a simple blower fan adapter for the Intel Xeon Phi coprocessor. With this you can adapt a blower fan to the Phi to make a passively cooled coprocessor become actively cooled. This is ideal for use in systems that do not otherwise have enough cooling capacity to cool passively cooled devices such as Nvidia Telsa P100 or V100 GPUs. -
Iron Man Tap Handle 3D Print Model
Summary
An Iron Man Tap Handle I made for my kegerator. I printed in PLA at 75% with support. The hole in the bottom is for a tap handle insert. Print, remove the support including the support inside the hole in the bottom, and thread in the insert. If the hole is too small, heat up the insert and you can thread it in hot because it melts the PLA.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
Doesn’t Matter Supports:
Yes Infill:
75% -
Footballer 02 Afterfall 01 3D Model
Footballer 02 Afterfall 01 3D print modelStl model of the footballer
-
FFG LCG Deluxe Box Trays 3D Print Model
Summary
This is a set of card and token holders for several of the Fantasy Flight Games LCGs. This will work in any of the games that use the older style boxes with a removable lid. These include the Star Wars LCG and Lord of the Rings LCGs. Unfortunately, FFG has moved towards a cheaper tuckbox style for their newer LCGs. The card holder is designed to work with standard FFG “gray” card sleeves.
I like to print the components separately, but did include a file with the three pieces together.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2mm Infill:
N/A -
Nerf FPV 3D Print Model
Summary
Experience your Nerf battles in a new way.. Mount this FPV system on a Nerf gun, find an open and safe area, put a set of goggles on and battle away. Add a DVR system and record your battles in first person view, it’s like playing a video game but you are in the game.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.100-.300 Infill:
100% Notes:
Some sanding may be required to achieve a clean fit.
How I Designed This
fusion 360 -
ISD1820 Recording / Speaker Module Placeholder 3D Print Model
Summary
This is a placeholder you can print and/or incorporate into your models in place of an ISD1820 recording/playback module PCB. Useful for planning or test-fitting the module into your prints or other projects.
There are many variants of the ISD1820 and similar recording modules available online, but this is the one I used for this design: https://www.amazon.com/gp/product/B01I37DBNE
OpenSCAD file is included if you want to modify the geometry.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.3 Infill:
20 -
Teal drone on wheels 3D Print Model
Summary
Teal drone with swivel wheels, use for taxiing on surface to takeoff-point or after landing taxiing toward you…. you can also try some joyriding 😉
Print Settings
Printer:
k8200 Notes:
print 1x body, 3x wheel, 3x wheel support and 3x clip -
CR-10 X & Y Tensionser Remix Kit 3D Print Model
Summary
So I had some issues with both x and y tensionsers I found here and ended up redesigning some of the parts. After the parts are all printed and the existing pulley/tensioner assemblies, switch the bearings and add the bearing jacket and insert on each one. This is a work in progress so the parts are subject to change. -
Robot Mech 3D Model
WELCOME TO 3DFORMATIONSYou are guaranteed precision component assembly with clean mesh and product lines for HIGH AND LOW POLY based model DATA.FULL SETUP READY TO RENDER FOR: (KEYSHOT) USERS ONLY.3D PRINTABLE FULLY TESTED IN RESIN FULL PARTS (STL) FILE INCLUDEDYOUR DOWNLOAD FILE INCLUDESX1 STLX1 BIP KEYSHOT + MATERIAL MAPS + ENVRIOMENT MAPIMPORTANT: SETUP ROOT PATHS TO ALL MAPS (INCLUDED) FOR CORRECT KEYSHOT (RENDER) SETUP.PLEASE CHECK OUT MY OTHER MODELSCLICK ON MY USER NAME (3DFORMATIONS) AT THE TOP OF THIS PAGEFOR MORE INFORMATION GOOGLE (KEYSHOTS) ITS FAST EASY TO USE FOR STUNNING RESULTS
-
Ring 3D Model
The ring with a gem stone 4.5mmThe file is ready for 3d-printing or millingWeight in 14k gold- 10g
-
Medusa ring 3D Model
An amazing ring with The Medusa face.A gem stones 1.5 mm – 16gemsWeight in 14k gold- 14gFiles are ready for 3dmilling and 3d-pprinting
-
The Ring with a gems 3D Model
File is ready for 3dprinting and millingGems: 10mm- 1 gem1.25mm- 24 gemsWeight in 14k gold – 4.5 g
