Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
40 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
45 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
Cargador 380cc 3D Print Model
Summary
Cargador 380cc
Con y sin soporte conector go pro. -
Rainbow Six Siege Logo Template 3D Print Model
Summary
This is a template I made with the Rainbow Six | Siege Logos. The model is meant to be scaled in the slicer software (at least in Cura) to fit whatever needs necessary. It is a template so everything is pretty much self explanatory. I used this on a Alpha Pack prop I made so that’s why the logos are arranged the way they are with the inclusion of a “barcode”.
Disclaimer: I do not claim to own the Rainbow Six | Siege logo or the rights to it.
Print Settings
Printer:
Monoprice Select Mini v2
Rafts:
No
Supports:
No
Resolution:
Doesn’t matter
Infill:
10% (Doesn’t matter) -
Betrayal at House on the Hill Token Organizer Bottom (lite) 3D Print Model
Summary
I removed some materials from the original version. Still seems pretty tough. Printed using 0.3mm resolution. -
25 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
30 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
35 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
10 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
15 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
20 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends!
-
UDI U818A Cover with Camera Stand 3D Print Model
Summary
This is a remix of thingiverse UDI U818A Cover Mod.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Not Applicable
Notes:
Printed on a FlashForge Creator Pro 2016 model. The corners are reinforced to improve attachment. This cover is modified to hold a whoop camera. -
Synology RT2600ac Wall Mount Adapter 3D Print Model
Summary
Lovely router by all reports (I haven’t actually set it up yet), but the steep angled legs make the built-in mounting slots rather ridiculous. They’re an inch away from the wall and tilted at about a 26-degree angle.
CAUTION: Synology’s instructions for this router say simply to place it on a flat surface and make no reference to the keyhole slots underneath. There is also a safety note, “Place the product right side up at all times.” Possibly I’ll have gone to all this trouble just to cook my router. I doubt it, but if yours overheats and you think it was because you put it on the wall, do let me know!
(I have so little flat surface available between computers, ink printers, 3D printers, a solder rework station and bookshelves, I’m willing to risk it.)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.20mm
Infill:
100%
Notes:
To avoid strain along layers, I rotated it to print standing tall with a 2mm brim. (See the PrintSetup.PNG screen capture.)
Make sure that the axis along which the little pins extend is your X or Y as printed, not Z, or the layers and the pins might detach under strain.
Post-Printing
Try #6 screws to mount it. #8 screws are a bit too large. I put the keyhole slots 2″ apart.
How I Designed This
Mostly just trial and error. Third try was the charm. I’m puzzled by the fact that according both to my digital caliper and the values I had to put into FreeCAD to make it work, the centers on the router’s mounting slots are about 2.06″ apart. That doesn’t even make sense as ~52.3mm. -
EleksMaker A3 Pro – On/Off Switch 3D Print Model
Summary
ON/OFF switch for EleksMaker A3 Pro
This is an on/off switch for the EleksMaker A3 Pro.
When I received my A3 Pro, the button in the bundle for the control board was round, which was fine, but the switch on the board is actually square, so it wouldn’t fit. Thus I made this.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.4mm -
Nebia Shower Wand Connector to 1/2″ BSP Adapter 3D Print Model
Summary
An adapter that changes Nebia’s proprietary shower wand connector to a standard 1/2″ BSP connector.
Note that the water temperature between the Nebia shower head and the 1/2″ BSP output might be significantly different, and there will be reduced water flow.
Use at your own risk.
Print Settings
Rafts:
No
Supports:
Doesn’t Matter
Infill:
100%
Notes:
Print using PETG for safety and durability. -
BMO Wall Hanger for Golden Sword 3D Print Model
Summary
This goes with the Golden Sword for Finn I made. The model I uploaded for the sword is designed for a kid. I enlarged it myself in Tinkercad to make it a bit bigger. If you do the same, this will work for both sizes. The arms are not perfect. I’m going to have to add some kind of filler to the nubs to make them look more smooth and fluid. the arm sockets also have extra material in them. I tried to get as much out as I could. Program is not perfect and I tried for about an hour just on one arm trying to get all that mess out. I’m going to take an razor blade to them and get the extra material out. Should work just fine. -
Portrait of a girl with a ponytail 3D Model
Portrait of a girl with a ponytail 3D print modelIn the format ztl separate subtool without levels of divisions. The total number of polygons 4 million 611 thousand. Has no UV and textures. Separately hair, body, eyelashes, eyebrows, dress, eyes.Models in obj and stl formats also do not have UV and textures, no color. Number of polygons in obj format 799 997, vertices 399 999. The height of the model as obj and stl 100 mm. But you can easily modify it in preparation for printing.
-
5 years anniversary medal 3D Model
Оriginal size 55mm * 50mm * 3.7mmModels for cnc and 3d printingGood gift for anniversary for relatives and friends
-
battery holder 18650 wismec style 3D Print Model
Summary
based on the wismec 2gen -
CZ_ZKM_451_452_455_magazine_3rnd 3D Print Model
Summary
After shock of this part price i have decided to try to make my own with a 3D printer. It needs a bit of skill, but now the magazine works properly even with printed spring. Unfortunately this kind of spring does not allow you to fill mag with more than three rounds.
If you can use steel spring, it would be better.
All modifications are allowed, but please do not use this model for commercial purposes. I would like to fight high prices of these parts by printing them for free (or for price of used filament).
See my other work at www.tisk3dmodelu.cz
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Notes:
material PETG, layer height 0.2mm, 2 perimeters, 100% infill, all other settings were default in Prusa slic3r
Main body, follower and bottom part should be rotated 90° in x axis before slicing. There should be some support material for the follower too.
Post-Printing
Bottom plate and gluing
I have filled space in shape of spade with kyanoacrylate glue and later I have brushed whole bottom to a high glossy surface.
I recommend to glue bottom and main body together after completing the magazine. But first be sure, your spring works properly. Do not glue the follower, but you may grease it for better movement inside of magazine. -
Small angle 3D Print Model
Summary
ABS is not good for this piece, because of heat dilatation. If you use ABS, your 100mm scale will be 99,5mm and your right angle will be 89°. So it might be better to use PETG. -
DIN rail Designer 0.3 3D Print Model
Summary
This “Designer” is for creating DIN rail holders. So far the features are:
Creates a holder with a circular hole
The size of the top and bottom can be independently customized
Optional removal of mid-section to save material
Optional finger-pull to release the clip
A customized chamfer radius can be added to the top of the hole
The depth of the clip (front to back) can be customized
Some of the other feature sizes can be customized under Advanced parameters
To design your own thing
Download both the .scad and .json files.
Install the Development version of OpenSCAD (http://www.openscad.org/downloads.html#snapshots)
Enable the Customizer according to https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/WIP#Customizer
Open the .scad file
Pick your preset or set your customizations
Render
Export as an STL file
Want a feature added? Let me know.
Print Settings
Rafts:
No
Supports:
Yes
Infill:
20%How I Designed This
Inspiration + OpenSCAD
Used the two remix sources for inspiration, and drew it all in OpenSCAD. -
Redesign wheel castors for video skate dolly 3D Print Model
Summary
This wheel castors was re-design for who not have anywheel.
It can spin freely in any direction.
It’s use 33×38 mm castors, 4×15 mm screw, and 7 mm nuts.
Refer to https://www.thingiverse.com/thing:357568
Print Settings
Printer:
Creality CR-8
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.3 mm per layer
Infill:
20% -
Spiral Box 3D Print Model
Summary
Spiral box – two sides twist into each other – holds in closed position with bumps/ridges. Print 2 of CB.stl (each side).
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Resolution:
.18 mm
Infill:
20
Notes:
You dont need supports – i printed with PETG for low shrinkage and flexibility. -
Tronxy Radial Fan Mount for stock shroud 3D Print Model
Summary
When I just got my Tronxy X1 a part cooling fan was missing. So the bridging performances were very bad. My extruder had alot of problems so I just needed a temporary fix while I made a mount for a V6.
So you just need two M3 screws to put on the side of the shroud and a screw and nut for the Radial Fan. I highly suggest adding a little deflector so your block doesnt cool off too much.
It’s a simple solution and I have a friend that uses it for his permanent set up.
NO NEED TO REPOSITION THE LIMIT SWITCH
Print Settings
Printer:
Tronxy X1
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
15 -
WLToys 10428B Magnetic Body Mount 3D Print Model
Summary
These parts mount to the WLToys 10428B RC vehicle to allow for quick access to the chassis without removing any screws. With a set of 1/2 inch x 1/8 inch N48 Neodymium magnets installed, this mount holds strong! Check out the video below for details:https://youtu.be/Ukx8tYVkOJ4
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Notes:
Printed .2 resolution and 20% infill. It’s plenty strong, and since it’s hidden, I’m not concerned with cosmetics. -
E3D V6 Mount without Sensor (Hypercube Evolution) 3D Print Model
Summary
I have remixed the Extruder Mount for the E3D V6.
Now with 2 bigger holes for the Endstops and without Sensor.
Have fun with it 🙂 -
SpeakerStand. 3 Parts 3D Print Model
Summary
Total of 3 parts for each speaker. Put together and place speaker on top. -
Anet A8 simple-fast damper to use with front frame brace 3D Print Model
Summary
I remixed MarcoCammozzo’s Anet A8 simple-fast damper so it can fit it in my front frame brace by Leo_N https://www.thingiverse.com/thing:1857991
Print Settings
Printer:
Anet A8
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
30%Overview and Background
-
Passthrough Mod Holder 3D Print Model
Summary
1590A passthrough mod holder, mount it anywhere using double sided tape. -
Logitech G930 U replacement for speaker 3D Print Model
Summary
Hi!
Just recently broke the speaker of on my G930 so i made a new one, Dosent look good but it works.
I printed the U shape with 0,2 res with a 0,4 nozzle.
The locking mechanism is printed with 0,125 res with 0,25 nozzle.
Will probably work to print both parts in 0,2 res with 0,4 nozzle.
I dont know but i think it will also work on the G35 headset.
What u need:
2x M2 16mm long screws
2x m2 Nuts
soldering iron
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0,125
Infill:
80-100
Notes:
just support on the U fitting
PLA -
Jewelery Arezoo diamond 3D Model
ring & pendant & earringgem : round , size : 1.25ring(size:57 weight:~4.7 gr 18k gold)pendant(weight:~3.2 gr 18k gold)earring( weight:~1.8 gr *2 )
-
ac for face 3D Print Model
Summary
blow into the mouthpiece and u will receive ac for ur face
extruder 210c
baseplate 40c
PLA plastic seems to work really well
thx if u downloaded! -
TronXY X1 Control Box and base V2 3D Print Model
Summary
all you guys and gals out there that are mad they now have to print a new better set you can blame (thank) Rob Zarfas from the FB “Tronxy X3, X1, X5 3D Printer Users (All models)” group
it was his suggestions and ideas that helped me draw this up
there are over 100 changers (i stopped counting at about 85)
in general its more compact and a better fitting unit
i have now printed this as yet but all the dimensions should work
Print Settings
Supports:
No
Resolution:
0.2mm
Infill:
30
Notes:
1.2 wall (0.4nozzle 3 wall thick)
0.8 bottom and top (4 layers at 0.2mm) -
API test kit tube holder 3D Print Model
Summary
I have a lot of freshwater tanks, including fish and shrimp. I need to test the water often with kits from the likes of API.
The tubes are very slim and fall over very easily, so I wanted to print something to hold a lot of tubes whilst testing the water.
This is the simplest snap together thing I could come up with.
Hope someone finds it useful.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
25
Notes:
Printed at 0.2 layer height, with 0.8 walls and surfaces.
infill can be anything you want, but 20 or less is perfectly fine. -
Lego kylo ren! (fixed) 3D Print Model
Summary
sorry it was broken before but its better now! (pleas don’t be mad i’m omly an 11 year old 😐 -
Geeetech Titan Aero sled 3D Print Model
Summary
Used with original bracket and bearings.
Print Settings
Printer:
Geetech i3 alu
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
0.3
Infill:
45% -
Playmobil Small Pirate Cannon Sticks and Bullets 3D Print Model
Summary
This re-design for my son’s small Playmobil pirate cannon.
After 20 minutes only he had lost 2 of the 3 original ones that came with the cannon.
Before the last one was also gone I redesigned it and printed a few more out.
First I used a square to remove part of the item with a square in the openSCAD code to obtain a flat side and print it out easily.
But the stick/bullet had to be inserted with the flat area to the side, or it would not fly good enough.
So I removed the square and printed it with supports.
Does not look perfect, but works better.
I did not dare to print it vertically…
You may modify the design to do so.
Print Settings
Printer:
Anycubic I3 Mega (Ultrabase)
Rafts:
Yes
Supports:
Yes
Resolution:
o.1
Infill:
100% -
iphone 7 Case for Flexible Filament 3D Print Model
Summary
I designed this case to work with flexible filament. When I had printed other snap cases for my iphone 7, I printed with normal PLA filament. However, if I ever dropped my phone the material would snap off or crack.
When I tried printing the same design using a flexible filament, the fit was off.
I therefore designed this with dimensions for printing with flexible filaments.
Print Settings
Printer:
Raise 3D N2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%Post-Printing
None -
Blinds bracket 3D Print Model
Summary
I found a similar bracket on Thingiverse (https://www.thingiverse.com/thing:1890399) but I decided to make my own because:
1) the customizer wasn’t working:
/usr/local/bin/openscad/openscad: error while loading shared libraries: libCGAL.so.10: cannot open shared object file: No such file or directory
2) I wanted to add a truss to make the bracket stronger.
3) I enjoy making things in OpenSCAD…
NOTE: I did not use the referenced bracket OpenSCAD code so this is not a remix.
Print Settings
Printer:
XYZprinting Da Vinci 1.0
Rafts:
No
Supports:
Yes
Infill:
solidHow I Designed This
OpenSCAD… -
Adapter for gimbal Tarot T3D III to F450 3D Print Model
Summary
Simple adapter to fix the gimbal Tarot T3D III to the F450 frame.
I used this (https://www.aliexpress.com/item/100pcs-M2-OD-3-2mm-Injection-Molding-Brass-Knurled-Thread-Inserts-Nuts/32815787260.html?spm=a2g0s.9042311.0.0.Z6BrEm) to screw the gimbal to the adapter. -
RepRapDiscount Full Graphic Smart Controller Case 3D Print Model
Summary
This is yet another case for the common RepRapDiscount Full Graphic Smart Controller. I wanted a 0.48mm line size (0.4mm nozzle * 1.2) optimized and small angled standalone case without mounting optionse.
Needed parts
RepRapDiscount Full Graphic Smart Controller
Printed parts
4pcs M3 16mm screws
How to support me?
Do you like my things and do you want to support me? You can use these links if you want to buy something. This helps me doing more things. Thanks!
Banggood: https://goo.gl/ZXgx3A
Gearbest: https://goo.gl/FfE59f
Aliexpress: https://goo.gl/bQLi15
Print Settings
Printer:
Anet AM8
Rafts:
No
Supports:
No
Resolution:
0.12-0.20
Infill:
30% -
Swiffer Duster to 3/4″ – 5 TPI ACME Thread Adapter 3D Print Model
Summary
Swiffer Duster handle to 3/4″ ACME thread, which is used on many paint poles. Used to dust the high corners of the house.
Simple remix of two files.
Not printed or tested yet. -
Spike/Tip for Reversible Umbrella 3D Print Model
Summary
So i bought these really awesome reversible umbrellas, they collapse opposite the way of a traditional umbrella. I love everything about these, except that when I use it as a walking cane, there is no spike on the end… Well now there is!
Object is printed, and then glued in place on top of the plastic screw. I know i could have printed the whole thing, but… I didn’t want to… -
Loving Cup 3D Print Model
Summary
This is inspired by the “One of Us” scene in Freaks. This was modeled in OpenSCAD using a blend of two of these goblet designs from Vecteezy (https://www.vecteezy.com/vector-art/84492-medieval-goblet-vector-set). To make it a bit more interesting I rotate_extruded the base using fewer faces while leaving the bowl/cup part smooth.
It’s modeled as a solid shape. To make a goblet, print with 0% infill and no bottom layers. -
NERF UltraStock (Ultimate Nerf stocks) 3D Print Model
Summary
UltraStocks for your NERF blaster.
Stock 1 – 2 Dart holders on each side and 1 clip holder.
Stock 2 – 3 total clip holders.
Print Settings
Printer:
Creality CR-10
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.2
Infill:
20% -
Moon 3D Model
High poly Moon.Measure units are meters, it is about 6,7 cm in diameter.Here is three version of files1) Moon_5829082) Moon_1165803) Moon_58290Number in titles means amount of faces.Available formats: .blend, .obj, .fbx, .stl, .3ds.
-
Leader120 to SpiderQuad Mini Split V1.1 3D Print Model
Summary
My new designe SpiderQuad Top for Leader 120 v1.1
This Top for Runcam Mini Split HD -
Caps Mount air duct for Armattan Rooster and Raceflight Bolt. 3D Print Model
Summary
This was designed for the Fighting Rooster build.
YouTube https://youtu.be/A_-5wU9x08k
Print Settings
Printer:
Custom
Rafts:
Doesn’t Matter
Supports:
Doesn’t MatterPost-Printing
How I Designed This
-
Wild Avocado! 3D Print Model
Summary
This is a screaming avocado that will scream at you whenever you want! Made in Microsoft 3d Builder. -
Support d’aileron universel 3D Print Model
Summary
Support universel TPU pour aileron lethal conception
