I said Celtic triquette printing time 12 minutes infill used 19% head temperature 226 ° Celsius 438.8 fahrenheit andand 46 degrees Celsius or 114.8 F.With regard to the size of the figure is 40 mm in diameter with an offset of 2mm, it prints perfectly with PLA withparticles or nanoparticles of metal (bronze, aluminum) or silk, the temperature listed above refers to theapplication of these materials.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Grainfather Dust Cover 3D Print Model
Summary
I wanted a cover for my Grainfather homebrew system. I understand why the cover is open, but wanted something to keep dust out of it when it was not in use and being stored. This inserts into the class top and is low profile so that it won’t add much height if your storage space is limited. -
Grainfather Switch Cover 3D Print Model
Summary
After upgrading my Grainfather to the Connect control box, the mash/normal switch was no longer necessary. I was always paranoid that I was going to accidentally switch the element to mash when moving it and slow down my brew day, so I was always checking it – even though I never actually had hit the switch. If you take off the plastic/rubber water resistant cover and replace it with this hard shell, then you don’t have to worry about hitting the switch anymore. -
On-Off Switch Bracket 3D Print Model
Summary
I love my inexpensive 3D printer, but I hate the fact that to turn on or off my Startt 3D printer I had to remove transformer plug from rear of the printer. I designed a simple ‘L’ shaped bracket to support a $0.50(US) mini switch. Simply undo 2 screws at the top of 3D printer and secure the bracket.
Print Settings
Printer:
Startt
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Infill:
20%
Notes:
PLA filament 0.2mm layer -
The Central decorative element 21 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 22 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 23 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 24 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 25 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 26 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 27 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 28 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 29 Free 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
The Central decorative element 30 3D Model
STL 3D model – the Central decorative elementThe model is ready for prototyping with CNC machining and 3D printing.
-
Shortened axe 3D Print Model
Summary
Another mini weapon. Made with a flattened edge for ease of printing.
This is modeled off a weapon i had a character in a dnd game using. It was a pole axe whose haft was shortened to be used one handed.
He was a big guy 😛
How I Designed This
modeled in 3D Studio max -
Ruger Precision RimFire Extended Magazine Release 3D Print Model
Summary
This is an extension for the Ruger Precision rimfire magazine release, it fits snug over the original lever… will not work with the Ruger 10 Round rotary magazines.
Print Settings
Printer:
QiDi X-PRO
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
50
Notes:
I used ABS, 50% infill printed on side with support and Brim. For better fitment and finish you will need to file/sand the areas that needed support (bottom side)
Post-Printing
For better fitment and finish you will need to file/sand the areas that needed support (bottom side)
How I Designed This
Areas to file /sand -
birb_chirper 3D Print Model
Summary
This is one of those toys that you whirl around on a piece of string and it makes a chirping sound like a flock of sparrows. I have no idea what they’re called, so I called it birb_chirper.
Print Settings
Printer:
Reach 3D
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.3 mm
Infill:
0%
Notes:
This is a thin-walled model, so use at least two shells and no infill for smooth walls.
Post-Printing
Take a piece of thin string about 1 metre long (I used micro-cord, very fine paracord), pass it through the hole in the tip, then tie off a jam knot that’s big enough to stop in the hole in the top but still pass back through the slot in the side. Now whirl the thing around fast by the string, and it should start to chirp.
This is intended for the amusement of small children and the annoyance of adults.
How I Designed This
The tip of this thing is an ogee curve. I’ve included my library for creating simple ogee and ogive profiles. -
Sparkmaker Replacement Leadscrew nut 3D Print Model
Summary
Due to the slack of the leadscrew nut on the stock sparkmaker unit.. i make a replacement for it.
This nut is around 7mm thick.. if you need a longer type, do pm me.. i will upload.
NOTE.. After print .. DO grease and run Through the Nut with the leadscrew first, it kind of tight.. Once it has go through and re-assemble back to the unit, recommend to run the liner movement print code and let it finish the whole cycle.. 🙂
Print Settings
Printer:
Anycubic kossel min K2
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.1
Infill:
100
Notes:
Type of filament reco for this application:
-POM
-PP
-PLA
Do print with 100% infill to ensure the parts are strong. -
AM8 Electronics Case with 120mm Fan Cover 3D Print Model
Summary
I loved this design by feenix82, especially the internal cable management, but wanted it to fit the AM8 Misumi Extrusion Frame. I only adjusted the tabs here to fit the frame. After printing I realized I made the tabs a little too thin and the screw would bottom out, therefore you may need to add a washer under the screw head to prevent that. The cover with 120mm fan is awesome but for some reason my printer had issues printing the honeycomb pattern horizontally so I got rid of them. This may actually improve airflow as it’ll pull more air from the sides of the case and out the front. Who knows. Either way, I like that the motherboard and mosfet is enclosed and this should provide some much needed cable management.
Print Settings
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
.2mm
Infill:
15%
Notes:
I printed with supports but many say you don’t need it. In my case it may have caused more issues as in trying to remove supports I broke some of the cable management loops inside and had to glue them. You’ll have to try it and see how it works with your printer. -
Removable Bed Levelling Probes for Delta Printers 9.5mm effector 3D Print Model
Summary
This is a remix/remake of Removable Bed Levelling Probes for Anycubic Kossel Linear designed by peaberry for 9.5mm effectors.
Attached FreeCAD files.
Print Settings
Printer:
prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30% -
Bed Frame Reinforcement A3 3D Print Model
Summary
Exactly the same model as made by AndresVH with the exception of the plate gap. The gap was narrowed to fit a JG Aurora A3. -
Storage bin with mount – for under bench etc 3D Print Model
Summary
Storage bin with mount that you can screw under a bench or something like that.
I made the holes for the screws for common tree screws 3,9mm X 40mm.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Yes
Supports:
Yes
Resolution:
0.15
Infill:
20% -
Candle Holder Free 3D Model
It was rendered at 3DSMax 2015 with vray 3.40 and photoshop.- Highly polygonal model;- Photorealistic 3D model.- Suitable for 3D Printing- Only, candle holder height is 53mm, diameter is 54 mm.- You have the option to choose, only candle holder or candle holder with candle or both..The model is ready to be included in your 3D scene, for that render at 3dsmax with VRAY, KeyShot etc… Enjoy!
-
Printable Fantasy Tree 3D Model
High Poly and print ready model of Tree.Measure units are meters, it is about 17 cm in height.Two versions are available:1) 906058 faces2)63422 faces – this files contains suffix _LR in it titles.Available formats: .blend, .fbx, .obj, .stl, .3dx.
-
Leatherman Rebar Clip Holster 3D Print Model
Summary
I was tired of my leatherman spinning in my pocket so I designed this. It can be clipped inside your pocket or to your belt.
Print Settings
Printer:
Anet A8
Rafts:
Yes
Supports:
Yes
Resolution:
0.1 – 0.2 mm
Infill:
30%
Notes:
May want to use raft or brim to make sure it doesn’t fall over. Use supports below clip but not inside it. -
Flat Print Cable Chain V2 ( No Glue ) 3D Print Model
Summary
This is a flat printed Cable Chain that is folded into the final shape. This gives you a stronger, cleaner part that will move smoothly.
Print Settings
Printer:
Hypercube
Rafts:
No
Supports:
No
Resolution:
0.2 initial layer, 0.1 layers, 0.2 Nozzle.
Infill:
50%
Notes:
The clip needs to be printed in the given orientation so that it has the maximum strength during flexing. After cleanup ( I use PETG so it can be blobby ) reheat the link to 80C on the bed to prevent stress during bending. -
Better Filament Holder for Prusa i3 3D Print Model
Summary
this is a better filament holder for your Prusa machine.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
.25
Infill:
20-30% -
Simple raspberry pi zero case 3D Print Model
Summary
Simple raspberry pi zero case only needs 4 m2x10mm screws and 4 m2 nuts. -
Wiible vase. 3D Print Model
Summary
I convinced My Mum to buy some Midnight tulips so I made her a tiny display vase for the first that pops up. -
Deadmau5 On Chair Gun Aim at Mice 3D Model
Deadmau5 On Chair Gun Aim at MiceLow Poly model made in Z brush.Made a quick render in Element 3D to see the model at a “low quality” look .Save you time and money.===============================================Ultimate high quality modelSculpted in Zbrush.Ready for 3DPrinting===============================================File Formats :- STL- Maya- OBJ===============================================Feel Free to take a look at our products.
-
Wall holder for Flashforge Creator Pro Original Spool holder 3D Print Model
Summary
Here is a wall holder for the original spool holder of the Flashforge Creator Pro. Of course, it also mount alternative holders designed for the Creator Pro.
( I had first attached the spools above the printer but then realized that the conduction of the teflon tubes doesnt work well. Thus, these have then attached under the printer. That worked a lot better. )
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Infill:
15% -
Tevo Tornado – Creality CR-10 Lights (low cost) 3D Print Model
Summary
Système de Leds à petit prix pour l’éclairage de votre Tevo Tornado ou Creality CR-10 :
Vous avez besoin de (Il existe une version 12 et 24volt) : http://www.ebay.fr/itm/10-x-24V-24-Volts-BLANC-6-LED-FEUX-DE-GABARIT-CAMION-CARAVANE-SHASSIS-REMORQUES/322314654417
Pour pouvoir installer la pièce dans le rail de la Tevo Tornado, vous devez retirer les vis du rail coté droit. Exercez une légère flexion de la pièce support et tout en tenant la flexion faites la glisser lentement dans le rail, puis relâcher.Vous pouvez ajouter un vis M3-M5 munie d’un T-nut.
Les leds sont branchées en parallèle (12-24v) directement sur l’alimentation (24v pas 110-220v)
Pour que la pièce soit solide, je conseille 90% d’infill.
Low cost led lights in 12-24 v.
You need in (12 or 24v): http://www.ebay.fr/itm/10-x-24V-24-Volts-BLANC-6-LED-FEUX-DE-GABARIT-CAMION-CARAVANE-SHASSIS-REMORQUES/322314654417
To be able to install the part in the TT rail, you must remove the screws from the rail on the right side. Exercise a slight bending of the support piece and while holding the flexion slowly slide it into the rail and then release. You can add a M3-M5 screw fitted with a T-nut.
The leds are connected in parallel (12-24v) directly on the power supply (24v not 110-220v)
For the piece to be solid, I advise 90% infill.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
90 -
Controlpanel for Ikea Lack Graphic Smart LCD Controllerand W1209 3D Print Model
Summary
Controlpanel for ikea lack table for Graphic Smart LCD Controller and W1209 Fancontrol
Its a Extension of thing:87250 and thing:2139389 for Ikea lack -
Antman – Civil War Helmet Wearable 3D Print Model
Summary
its sized and thickend so you only have to cut out the eyeholes. -
Tronxy X5s Z axis printed split bushing 3D Print Model
Summary
When building my Tronxy X5s, I was not impressed by the stock Z axis bearings. So I designed and printed a replacement system. The bushing has a split in it and you slide the sleeve over it and tighten it with 2 M3 screws and nuts. I printed the bushing in PLA and the Sleeve in PETG, but you could print it in PLA. There is also a short version in which a IGUS RJ4JP-01-08 sits on top of it and both are held and tightened by the sleeve. This was created for the people who do not like PLA bushings.
Print Settings
Printer:
SmartRap – Highly modifed
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30
Notes:
Set up the number of shells to be enough to create the bushing vertical section without any infill. Allowing the shells to make up the “fingers” of the inner part of the bushing. Mine was 3 shells.
How I Designed This
Designed in Fusion 360 -
Flower print ready 3D Model
High Ploy, print ready model of a flower.Meters was used as measure units, it is about 3 cm in diameter.Available formats: .blend, .fbx, .obj, .stl, .3ds.Faces count: 243944For .3ds format there is only 60986 faces.
-
One-piece Caliburn Foregrip 3D Print Model
Summary
Remixed from Caliburn (Captain Slug) and user Misery5567 (AR-15 Skeleton Foregrip) -
15mm x 5mm magnet holder 3D Print Model
Summary
15mm x 5mm magnet holder.
The hole for the magnet is a little undersized so the printed part can be heated a little (eg hot water if using PLA) and press fit. Or use some glue or if your magnet has a hole in center – a screw. I went with heating and press fit and its been solid.
i didn’t use any support when printing, the inside roof of the hole where the magnet goes is a fair span (15mm of unsupported distance) and so that particular surface wasn’t perfect but it worked fine and its behind the magnet anyway – doing this saves breaking out support material.
Print Settings
Printer:
aldi cocoon
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
no -
spare fuse holder 6 x 30mm 3D Print Model
Summary
Holds a spare 6x30mm fuse.
Use zip ties to connect it to a lead and you have a spare fuse ready to use for your equipment.
Print Settings
Printer:
aldi cocoon
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
80% -
Rostock Nano Basic Cooler 3D Print Model
Summary
This is a Rostock Nano’s 30mm fan Cooler.
For easy make easy remix.
Fixed fan :M3x20mm x2
Fixed plathome M3×15mm ×1 With Nut
Print Settings
Printer:
Rostock Nano
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% -
Customizable Knob! – PGS 3D Print Model
Summary
Modified https://www.thingiverse.com/thing:54024 to include an option to change the orientation of the notch. -
Pokemon Charizard Vs Pikachu Fire And Thunder Battle 3D Model
Pokemon Charizard Vs Pikachu Fire And Thunder Battle Sculpt===============================================Ultimate high quality modelSculpted in Zbrush.Ready for 3DPrinting===============================================File Formats :- STL- OBJ===============================================Feel Free to take a look at our products.
-
YETI LoadOut Bucket Gear-Strap-Hook thingy 3D Print Model
Summary
This is a custom strap hook that fits in the bucket slots. I plan on making a custom gear belt for my bucket and this is how I will attach the belt to the bucket. Similar design to the YETI Gear Belt shown here:
https://www.yeti.com/accessories/loadout-gear-belt/23040000019.html -
Piper 1 3D Printer Electronics Enclosures 3D Print Model
Summary
Arduino and Ramps 1.4 (plus optional SSR) and PSU enclosures for Piper 1 3D printer.
To fit this enclosure Ramps 1.4 board need some minor modification: power connection of the board should be resoldered to use Pitch PCB Mount Screw Terminal Block like this: https://www.amazon.com/gp/product/B00FZLPCKC instead of Male-Female PCB Screw Terminal Block.
Link to Piper 1: https://www.thingiverse.com/thing:2794632 -
Quadcopter battery storage 3D Print Model
Summary
A holder for quadcopter batteries, the size of the inner compartment is 25x9x44. In the picture it says 400 mah, I changed it in the design to: “batteries”, so if you have different batteries it’s not the wrong value.
Print Settings
Printer:
TronXY X1
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.2
Infill:
20
Notes:
the print orientations are correct, you need the print: “Quad_battery_holder_Thingiverse_1” with supports. -
Battlestar Valkyrie 3D Print Model
Summary
Battlestar Valkyrie model pulled from Sins of a Solar Empire mod Fall of Kobol (http://www.moddb.com/mods/fall-of-kobol).
Still working on getting it optimized for printing. -
Tribute to Tiffanys pen holder 3D Print Model
Summary
This was created as a gag gift for some people in the office. It was supposed to resemble the $1000 Tiffany’s sterling silver pen holder.
Best results can be achieved by using primer filler and wet sanding a few times, then painting the model with sterling silver spray paint
The inside of the “can” was painted with Rust-Oleum 284678, Gloss Light Turquoise
Print Settings
Printer:
D-Bot / Anet A8
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
.2mm
Infill:
Doesn’t matter
Notes:
Might want to print the first layer slow to get the best resolution on the text. -
Xhover Win5L SMA + Immortal T Holder 3D Print Model
Summary
Designed a SMA + Immortal T mount for the new Xhover Win5L frame. Same basic design as the one for the Win5, but with the posts adjusted further in. Needs to be printed in TPU in order to get the Immortal T in the hooks.
Print Settings
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn’t Matter
Supports:
Yes
Notes:
Print in TPU -
Konahrik Dragon Priest Mask SLICED 3D Print Model
Summary
I really liked the mask but I only have a 8x8x8 build space so I sliced this guy up in mesh mixer for those in a similar boat. This should work on many more printers now. Print edge down on glass bed with auto supports and it should come out perfect after you glue the edges.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
Doesn’t Matter
Supports:
Yes
Infill:
30
Notes:
Use brim if printing fast so print doesnt come off bed.
GO TO JTM’S PAGE FOR TUSKS -
Uncle Grandpa Time Machine Watch 3D Print Model
Summary
My son is a fan of the Cartoon Network show Uncle Grandpa. In s03e03 Back to the Library, Uncle Grandpa uses a time machine watch to travel through time. My son wanted one so I made this model and printed him off one. It’s modeled to his size, so scale to what will fit you.
Print Settings
Rafts:
No
Supports:
NoPost-Printing
You’ll need to add a strap to this. Given the size I printed mine at, it requires something custom.
It also requires some blue paint for the recessed triangle and “buttons”. -
full register and buss 3D Print Model
Summary
this is the full register and buss, each register of the processor will use this component.
http://www.imm.org/Reports/rep046.pdf
the scad file also contains the other components that have been uploaded previously.
t.
Eventually i intend to parameterize the file and make it animatable but my current skill level with open scad is rudimentary at best. -
P Body Seat Latch 3D Print Model
Summary
Rear seat release handle for Dodge Shadow and Dodge Lancer cars.
Please abide by the license agreement. -
Pièce pour Hyper Master Mind 3D Print Model
Summary
Entretoise moyenne pour pion du jeu Hyper Master Mind (Mean Spacer for Master mind game pawn). -
Ohrenspritzenträger / ear syringe holder 3D Print Model
Summary
Ein Halter für ein Ohrenspritzenball, bei dem die restliche Feuchtigkeit abtropfen kann.
A holder for an ear syringe ball, where the remaining moisture can drip off.
Print Settings
Printer:
CTC
Rafts:
No
Supports:
No
Resolution:
0,1 mm
Infill:
15 %
Notes:
PLA -
lock with wire clip for Creality Ender 2 wire chain 3D Print Model
Summary
I remixed the lock of the Ender Cable Chain by ninne (https://www.thingiverse.com/thing:2498801) with the clamp of the bowden wire clips by Evanrude (https://www.thingiverse.com/thing:2328449) to attach the hot bed cable to the chain. It prevents the hot bed calbe from scrubbing the chain and the power cable.
