The Dunkerque-class battleship was a type of warship constructed for the French Navy in the 1930s.The Dunkerques were designed to counter the German Deutschland-class pocket battleships. Their main armament was two quadruple 330 mm turrets forward, with a 225 mm (8.9 in) thick armored belt. They were smaller, with a 26,500- to 27,300-ton standard displacement and a smaller main artillery caliber, than the battleships authorized by the Washington Naval Treaty, but their speed was 7 knots higher than any of the battleships built from 1920 to 1937. When they were commissioned, only the last existing battlecruisers of the British Royal Navy and the Imperial Japanese Navy were their equals.Given their characteristics, they were alternatively classified as fast battleships, small battleships, battlecruisers, and even as “ships of the line” (Fr. navires de ligne).Two ships, Dunkerque and Strasbourg, were completed. Together they formed the 1ere Division de Ligne (“1st Division of the Line”), and saw service during the early years of the Second World War. While they never encountered the German pocket battleships they were designed to counter, they suffered the British attack of Mers-el-Kebir, and stayed under the Vichy authorities control until they were scuttled at Toulon in November 1942.Textures from 256×256 to 4096×4096 DDS/JPGDiffuse, Opacity
Tag: warship
-
Dunkerque battleship 3D Model
The Dunkerque-class battleship was a type of warship constructed for the French Navy in the 1930s.The Dunkerques were designed to counter the German Deutschland-class pocket battleships. Their main armament was two quadruple 330 mm turrets forward, with a 225 mm (8.9 in) thick armored belt. They were smaller, with a 26,500- to 27,300-ton standard displacement and a smaller main artillery caliber, than the battleships authorized by the Washington Naval Treaty, but their speed was 7 knots higher than any of the battleships built from 1920 to 1937. When they were commissioned, only the last existing battlecruisers of the British Royal Navy and the Imperial Japanese Navy were their equals.Given their characteristics, they were alternatively classified as fast battleships, small battleships, battlecruisers, and even as “ships of the line” (Fr. navires de ligne).Two ships, Dunkerque and Strasbourg, were completed. Together they formed the 1ere Division de Ligne (“1st Division of the Line”), and saw service during the early years of the Second World War. While they never encountered the German pocket battleships they were designed to counter, they suffered the British attack of Mers-el-Kebir, and stayed under the Vichy authorities control until they were scuttled at Toulon in November 1942.Textures from 256×256 to 4096×4096 DDS/JPGDiffuse, Opacity
-
USS Pensacola CA-24 with F4F 3D Model
USS Pensacola (CL/CA-24) was a cruiser of the United States Navy that was in service from 1929 to 1945. She was the lead ship of the Pensacola class, which the navy classified from 1931 as heavy cruisers. The third Navy ship to be named after the city of Pensacola, Florida, she was nicknamed the “Grey Ghost” by Tokyo Rose. She received 13 battle stars for her service.She was laid down by the New York Navy Yard on 27 October 1926, launched on 25 April 1929, sponsored by Mrs. Joseph L. Seligman, and commissioned on 6 February 1930, Captain Alfred G. Howe in command.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS New York BB-34 3D Model
SS New York (BB-34) was a United States Navy battleship, the lead ship of her class. Named for New York State, she was designed as the first ship to carry the 14-inch (356 mm)/45-caliber gun.Entering service in 1914, she was part of the U.S. Navy force which was sent to reinforce the British Grand Fleet in the North Sea near the end of World War I. During that time, she was involved in at least two incidents with German U-boats, and is believed to have been the only US ship to have sunk one in the war, during an accidental collision in October 1918. Following the war, she was sent on a litany of training exercises and cruises in both the Atlantic and the Pacific, and saw several overhauls to increase her armament, aircraft handling and armor.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS North Carolina BB-55 with F4F 3D Model
USS North Carolina (BB-55) is the lead ship of North Carolina-class battleship and the fourth warship in the U.S. Navy to be named for the State of North Carolina. She was the first newly constructed American battleship to enter service during World War II, and took part in every major naval offensive in the Pacific Theater of Operations; her 15 battle stars made her the most decorated American battleship of World War II. She is now a museum ship and memorial kept at the seaport of Wilmington, North Carolina.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS Independence CVL-22 3D Model
3D model USS Independence with aircraft F-4B & SBU-1. USS Independence (CVL-22) was a United States Navy light aircraft carrier, lead ship of her class and served during the Second World War.Converted from the hull of a cruiser, she was built by the New York Shipbuilding Corporation and commissioned in January 1943. She took part in the attacks on Rabaul and Tarawa before being torpedoed by Japanese aircraft, necessitating repairs in San Francisco from January to July 1944.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Iowa BB-61 with F4F 3D Model
USS Iowa (BB-61) is the lead ship of her class of battleship and the fourth in the United States Navy to be named after the state of Iowa. Owing to the cancellation of the Montana-class battleships, Iowa is the last lead ship of any class of United States battleships and was the only ship of her class to have served in the Atlantic Ocean during World War II3d model of the ship of the 1943 model.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Enterprise CV-6 3D Model
USS Enterprise (CV-6), was the seventh U.S. Navy vessel to bear the name. Colloquially called “the Big E”, she was the sixth aircraft carrier of the United States Navy. A Yorktown-class carrier, she was launched in 1936 and was one of only three American carriers commissioned before World War II to survive the war (the others being Saratoga and Ranger). She participated in more major actions of the war against Japan than any other United States ship. These actions included the Attack on Pearl Harbor (18 dive bombers of VS-6 were over the harbor, 6 were shot down with a loss of eleven men, making her the only American Aircraft carrier with men at Pearl Harbor during the Attack and the first to receive casualties during the Pacific War), the Battle of Midway, the Battle of the Eastern Solomons, the Battle of the Santa Cruz Islands, various other air-sea engagements during the Guadalcanal Campaign, the Battle of the Philippine Sea, and the Battle of Leyte Gulf. Enterprise earned 20 battle stars, the most for any U.S. warship in World War II, and was the most decorated U.S. ship of World War II, She is also the first American ship to sink an enemy vessel during the Pacific War, the sole surviving pilot of the six planes shot down over Pearl Harbor sank Japanese submarine I-70 on 10 December 1941. On three occasions during the Pacific War, the Japanese announced that she had been sunk in battle, resulting in her being named “The Grey Ghost”.Units scael: meters.Texture: from 256 to 4096x4096Diffuse, Opacity.
-
HMS Warspite with Walrus 3D Model
HMS Warspite was a Queen Elizabeth-class battleship built for the Royal Navy during the early 1910s. Her thirty-year career covered both world wars and took her across the Atlantic, Indian, Arctic and Pacific Oceans. She participated in the Battle of Jutland during the First World War as part of the Grand Fleet. Other than that battle, and the inconclusive Action of 19 August, her service during the war generally consisted of routine patrols and training in the North Sea.During the Second World War, she was involved in several major engagements, including battles in the North Sea and Mediterranean, earning her the most battle honours ever awarded to an individual ship in the Royal Navy. For this and other reasons Warspite gained the nickname the “Grand Old Lady” after a comment made by Admiral Sir Andrew Cunningham in 1943 while she was his flagship.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Somers-class destroyer project 48 Kiev 3D Model
Leaders of destroyers of project 48, also known as leaders of destroyers of the type “Kiev” (by the name of the main ship) – the type of leaders of destroyers, built in 1939-1941 for the Soviet Navy. In total, under the project 48 for the “Great Fleet” of the USSR, twenty leaders of destroyers were to be built at Soviet shipyards. According to the documents, by the fall of 1940 eight leaders were laid. The construction of three of them, as well as the construction of three more ships, was stopped in October 1940 in favor of the construction of the leaders of the project 47 with the universal artillery of the main caliber. Two more leaders, planned to be bookmarked at the shipyard No. 402 in Molotovsk, were never laid. In 1944-1950, a corrected 48-K project was designed at TsKB-17 and at the design bureau of plant No. 444, according to which the corps of leaders “Kiev” and “Yerevan” were to be completed, but in 1950 the leadership of the shipbuilding industry was a decision was made to abandon the completion of these two ships. Both unfinished ships were converted into target ships and flooded at various times during testing of anti-ship missiles.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Soviet cruiser Mikhail Kutuzov 3D Model
Mikhail Kutuzov (Russian: Михаил Кутузов) was a light cruiser project no. 68-bis (designated the Sverdlov class by NATO) of the Soviet and later the Russian Navy’s Black Sea Fleet.She was laid down at the Black Sea Shipyard in Nikolayev on 23 February 1951 and commissioned on 30 February 1954. Mikhail Kutuzov joined the Black Sea Fleet after commissioning and sea trials, on 31 January 1955.On 28 July 2002, Mikhail Kutuzov was opened to the public as a museum ship in Novorossiysk. On 1 October 2012, she was made a branch of the Central Naval Museum.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Murmansk light cruiser with OS2U 3D Model
USS Milwaukee (CL-5) was an Omaha-class light cruiser built for the United States Navy during the 1920s. The ship spent most of her early career assigned to the Asiatic and Battle Fleets. In 1941 she was assigned to the Neutrality Patrol until she was refitted in New York in late 1941. She escorted a troop convoy to the Pacific in early 1942 before returning to the South Atlantic where she patrolled for German commerce raiders and blockade runners. In November, she intercepted one of the latter, but it scuttled itself before it could be captured. In 1944 she was temporarily transferred to the Soviet Navy and commissioned as Murmansk. The ship was returned by the Soviets in 1949 and sold for scrap in December.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
HMS Weymouth Town-class light cruiser 3D Model
HMS Weymouth was a Town-class light cruiser built for the Royal Navy during the 1910s. She was the name ship of the Weymouth sub-class of the Town class. The ship survived the First World War and was sold for scrap in 1928The ship was laid down on 19 January 1910 by Armstrong Whitworth at their Elswick shipyard and launched on 18 November. Upon completion in October 1911, Weymouth was assigned to the 3rd Battle Squadron of the Atlantic Fleet and was transferred to the 2nd Light Cruiser Squadron in the Mediterranean in June 1913. In August 1914, Weymouth was detached to sail into the Indian Ocean to hunt for the German light cruiser SMS Emden, which was raiding Allied shipping in the area. In February 1915, she was operating off the East African coast as part of operations against another commerce raider, SMS Konigsberg, eventually trapping her in the Rufiji River until she could be sunk.Textures: from 256×256 to 4096x4096Diffuse, Specular, Opacity.
-
Japanese battleship Yamato 3D Model
Yamato was the lead ship of the Yamato class of Imperial Japanese Navy World War II battleships. She and her sister ship, Musashi, were the heaviest battleships ever constructed, displacing 72,800 tonnes at full load and armed with nine 46 cm 45 Caliber Type 94 main guns, which were the largest guns ever mounted on a warship. Neither ship survived the war.Units scale: meters.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Dunkerque battleship 3D Model
The Dunkerque-class battleship was a type of warship constructed for the French Navy in the 1930s.The Dunkerques were designed to counter the German Deutschland-class pocket battleships. Their main armament was two quadruple 330 mm turrets forward, with a 225 mm (8.9 in) thick armored belt. They were smaller, with a 26,500- to 27,300-ton standard displacement and a smaller main artillery caliber, than the battleships authorized by the Washington Naval Treaty, but their speed was 7 knots higher than any of the battleships built from 1920 to 1937. When they were commissioned, only the last existing battlecruisers of the British Royal Navy and the Imperial Japanese Navy were their equals.Given their characteristics, they were alternatively classified as fast battleships, small battleships, battlecruisers, and even as “ships of the line” (Fr. navires de ligne).Two ships, Dunkerque and Strasbourg, were completed. Together they formed the 1ere Division de Ligne (“1st Division of the Line”), and saw service during the early years of the Second World War. While they never encountered the German pocket battleships they were designed to counter, they suffered the British attack of Mers-el-Kebir, and stayed under the Vichy authorities control until they were scuttled at Toulon in November 1942.Textures from 256×256 to 4096×4096 DDS/JPGDiffuse, Opacity
-
Medieval ship 3D Model
This is a high definition quality polygon 3d model of a Medieval ship 3d model with PBR and V-Ray textures. Extremely detailed and realistic. Suitable for movie prop, architectural visualizations, advertising renders and other.The 3ds Max file includes cameras, lights and render settings.This is a high quality asset originally modeled in 3DS Max 2018.Scene in Marmoset included.-Model unwrapped manually to make most efficient use of the Unfold3d-Including FBX, OBJ, 3ds formats-The model has real-world scale and is centered at the origin- Units used: centimetres- Mesh object is editable poly.- Clean Unwrap UV- Good topologyRENDER SCENE IS INCLUDED in 3DS MAX 2018_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _As this is a model for visualization specifications, it is not intended for subdivision._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _TEXTURES PBR:- There are 6 textures:-Base color-Normal Map-Height Map-Metallic Map-Ambient Occlusion-Roughness MapV-RAY:- Diffuse- Glossiness- Height- IOR- Normal- Reflection- Texture Resolutions are 2048×2048 PNG format- Turntable and images were rendered in Marmoset 3Also included renders in V-RAY 3.6Please RATE this product if you are satisfied.Also check out my other models.
-
Anchor Chain 3D Model
This is an anchor of the shipsU will get All Textures in 4k Resolution with , Defuse,Normal,Displacement,Reflection Maps.
-
Pirate Ship 3D Model
Low poly pirate ship ready for games,media,animation etc.Used textures and materials.Made with 3ds max 2018 and rendered with vray 3.60.No third party required.Animated items: Door open close animation (open:0-25 frame,close: 25-50 frame).Separate items: Door,Chest,Boat, 4xCannons.Polygons: 17.517Vertices:10.599Contact via message about any problem for an instant solution.Other available formats:fbx , obj.
-
Ship Santa Maria 3D Model
High detailed 3D model of Santa Maria Ship. Suitable for movie prop, architectural visualizations, advertising renders and other.the model was designed by drawings
-
Cr-90 Blockade runner correlian corvette 3D Model
High-poly model of starwars correlian corvette Cr-90.Rebel blockade runner.
-
USS Alaska CB-1 Battle Cruiser 3D Model
3d model of the USS Alaska. The Alaska was commissioned in 1944 and served in the US Navy in WW2. The ship was stationed in the Pacific.Highly detailed.Modeled in Blender and rendered in Cycles.Exported to:OBJ -WavefrontFBX -Autodesk3ds -3D MaxBlend -blenderModeled from blueprints.
-
Roman warship 3D Model
Roman battle galley. Performed in the highest quality on the 3d program. Can be used in game locations, 3d animations, interiors, as well as a toy for children’s rooms.
-
Ship Lego 3D Model
The Lego warship is from the Brick 112. The model can be used for interior and children’s rooms, as well as for game locations.
-
Hades 3D Model
spacecraft scifi warship cruiser destroyer space spaceship starship realistic highpoly detailed carrier docks
-
USS Dewey 3D Model
USS Dewey DDG 105 destroyer US Navy vessel Arleigh Burke Class ship ddg105 flight 2 a II IIa battleship warship USN ddg-105 battle 418
-
Dunkerque battleship 3D Model
The Dunkerque-class battleship was a type of warship constructed for the French Navy in the 1930s.The Dunkerques were designed to counter the German Deutschland-class pocket battleships. Their main armament was two quadruple 330 mm turrets forward, with a 225 mm (8.9 in) thick armored belt. They were smaller, with a 26,500- to 27,300-ton standard displacement and a smaller main artillery caliber, than the battleships authorized by the Washington Naval Treaty, but their speed was 7 knots higher than any of the battleships built from 1920 to 1937. When they were commissioned, only the last existing battlecruisers of the British Royal Navy and the Imperial Japanese Navy were their equals.Given their characteristics, they were alternatively classified as fast battleships, small battleships, battlecruisers, and even as “ships of the line” (Fr. navires de ligne).Two ships, Dunkerque and Strasbourg, were completed. Together they formed the 1ere Division de Ligne (“1st Division of the Line”), and saw service during the early years of the Second World War. While they never encountered the German pocket battleships they were designed to counter, they suffered the British attack of Mers-el-Kebir, and stayed under the Vichy authorities control until they were scuttled at Toulon in November 1942.Textures from 256×256 to 4096×4096 DDS/JPGDiffuse, Opacity
-
Japanese battleship Yamato 3D Model
Yamato was the lead ship of the Yamato class of Imperial Japanese Navy World War II battleships. She and her sister ship, Musashi, were the heaviest battleships ever constructed, displacing 72,800 tonnes at full load and armed with nine 46 cm 45 Caliber Type 94 main guns, which were the largest guns ever mounted on a warship. Neither ship survived the war.Units scale: meters.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Iowa BB-61 with F4F 3D Model
USS Iowa (BB-61) is the lead ship of her class of battleship and the fourth in the United States Navy to be named after the state of Iowa. Owing to the cancellation of the Montana-class battleships, Iowa is the last lead ship of any class of United States battleships and was the only ship of her class to have served in the Atlantic Ocean during World War II3d model of the ship of the 1943 model.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS New York BB-34 3D Model
SS New York (BB-34) was a United States Navy battleship, the lead ship of her class. Named for New York State, she was designed as the first ship to carry the 14-inch (356 mm)/45-caliber gun.Entering service in 1914, she was part of the U.S. Navy force which was sent to reinforce the British Grand Fleet in the North Sea near the end of World War I. During that time, she was involved in at least two incidents with German U-boats, and is believed to have been the only US ship to have sunk one in the war, during an accidental collision in October 1918. Following the war, she was sent on a litany of training exercises and cruises in both the Atlantic and the Pacific, and saw several overhauls to increase her armament, aircraft handling and armor.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS North Carolina BB-55 with F4F 3D Model
USS North Carolina (BB-55) is the lead ship of North Carolina-class battleship and the fourth warship in the U.S. Navy to be named for the State of North Carolina. She was the first newly constructed American battleship to enter service during World War II, and took part in every major naval offensive in the Pacific Theater of Operations; her 15 battle stars made her the most decorated American battleship of World War II. She is now a museum ship and memorial kept at the seaport of Wilmington, North Carolina.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS Pensacola CA-24 with F4F 3D Model
USS Pensacola (CL/CA-24) was a cruiser of the United States Navy that was in service from 1929 to 1945. She was the lead ship of the Pensacola class, which the navy classified from 1931 as heavy cruisers. The third Navy ship to be named after the city of Pensacola, Florida, she was nicknamed the “Grey Ghost” by Tokyo Rose. She received 13 battle stars for her service.She was laid down by the New York Navy Yard on 27 October 1926, launched on 25 April 1929, sponsored by Mrs. Joseph L. Seligman, and commissioned on 6 February 1930, Captain Alfred G. Howe in command.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS Enterprise CV-6 3D Model
USS Enterprise (CV-6), was the seventh U.S. Navy vessel to bear the name. Colloquially called “the Big E”, she was the sixth aircraft carrier of the United States Navy. A Yorktown-class carrier, she was launched in 1936 and was one of only three American carriers commissioned before World War II to survive the war (the others being Saratoga and Ranger). She participated in more major actions of the war against Japan than any other United States ship. These actions included the Attack on Pearl Harbor (18 dive bombers of VS-6 were over the harbor, 6 were shot down with a loss of eleven men, making her the only American Aircraft carrier with men at Pearl Harbor during the Attack and the first to receive casualties during the Pacific War), the Battle of Midway, the Battle of the Eastern Solomons, the Battle of the Santa Cruz Islands, various other air-sea engagements during the Guadalcanal Campaign, the Battle of the Philippine Sea, and the Battle of Leyte Gulf. Enterprise earned 20 battle stars, the most for any U.S. warship in World War II, and was the most decorated U.S. ship of World War II, She is also the first American ship to sink an enemy vessel during the Pacific War, the sole surviving pilot of the six planes shot down over Pearl Harbor sank Japanese submarine I-70 on 10 December 1941. On three occasions during the Pacific War, the Japanese announced that she had been sunk in battle, resulting in her being named “The Grey Ghost”.Units scael: meters.Texture: from 256 to 4096x4096Diffuse, Opacity.
-
USS Independence CVL-22 3D Model
3D model USS Independence with aircraft F-4B & SBU-1. USS Independence (CVL-22) was a United States Navy light aircraft carrier, lead ship of her class and served during the Second World War.Converted from the hull of a cruiser, she was built by the New York Shipbuilding Corporation and commissioned in January 1943. She took part in the attacks on Rabaul and Tarawa before being torpedoed by Japanese aircraft, necessitating repairs in San Francisco from January to July 1944.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Space Warplanes Lowpoly 3D Model
Space Warplanes low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.I want to present you little package with 3d models and 2d arts for casual mobile game. In this game main player flies across infinity space and fights with his enemies.The package consist FBX 3D models and 2D artThe list of prefabs:Player Level 1: 366 TrianglesPlayer Level 2: 866 TrianglesPlayer Level 3: 962 TrianglesPlayer Level 4: 1130 TrianglesPlayer Bonus Ion: 948 TrianglesPlayer Bonus Shield: 1034 TrianglesEnemy Kamikaze: 696 TrianglesEnemy Freezer: 754 TrianglesEnemy Teleportator: 704 TrianglesItems of bonus: Shield, Rockets, Ion GunThere is 4 options of Background in the package, separate PNG and JPG layer with starsAlso the package include two 2D VFX of attack (default fire and laser).
-
USS Pensacola CA-24 with F4F 3D Model
USS Pensacola (CL/CA-24) was a cruiser of the United States Navy that was in service from 1929 to 1945. She was the lead ship of the Pensacola class, which the navy classified from 1931 as heavy cruisers. The third Navy ship to be named after the city of Pensacola, Florida, she was nicknamed the “Grey Ghost” by Tokyo Rose. She received 13 battle stars for her service.She was laid down by the New York Navy Yard on 27 October 1926, launched on 25 April 1929, sponsored by Mrs. Joseph L. Seligman, and commissioned on 6 February 1930, Captain Alfred G. Howe in command.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS North Carolina BB-55 with F4F 3D Model
USS North Carolina (BB-55) is the lead ship of North Carolina-class battleship and the fourth warship in the U.S. Navy to be named for the State of North Carolina. She was the first newly constructed American battleship to enter service during World War II, and took part in every major naval offensive in the Pacific Theater of Operations; her 15 battle stars made her the most decorated American battleship of World War II. She is now a museum ship and memorial kept at the seaport of Wilmington, North Carolina.Textures: from 256×256 to 4096x4096Diffuse, Opacity
-
USS New York BB-34 3D Model
SS New York (BB-34) was a United States Navy battleship, the lead ship of her class. Named for New York State, she was designed as the first ship to carry the 14-inch (356 mm)/45-caliber gun.Entering service in 1914, she was part of the U.S. Navy force which was sent to reinforce the British Grand Fleet in the North Sea near the end of World War I. During that time, she was involved in at least two incidents with German U-boats, and is believed to have been the only US ship to have sunk one in the war, during an accidental collision in October 1918. Following the war, she was sent on a litany of training exercises and cruises in both the Atlantic and the Pacific, and saw several overhauls to increase her armament, aircraft handling and armor.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Iowa BB-61 with F4F 3D Model
USS Iowa (BB-61) is the lead ship of her class of battleship and the fourth in the United States Navy to be named after the state of Iowa. Owing to the cancellation of the Montana-class battleships, Iowa is the last lead ship of any class of United States battleships and was the only ship of her class to have served in the Atlantic Ocean during World War II3d model of the ship of the 1943 model.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Independence CVL-22 3D Model
3D model USS Independence with aircraft F-4B & SBU-1. USS Independence (CVL-22) was a United States Navy light aircraft carrier, lead ship of her class and served during the Second World War.Converted from the hull of a cruiser, she was built by the New York Shipbuilding Corporation and commissioned in January 1943. She took part in the attacks on Rabaul and Tarawa before being torpedoed by Japanese aircraft, necessitating repairs in San Francisco from January to July 1944.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
Japanese battleship Yamato 3D Model
Yamato was the lead ship of the Yamato class of Imperial Japanese Navy World War II battleships. She and her sister ship, Musashi, were the heaviest battleships ever constructed, displacing 72,800 tonnes at full load and armed with nine 46 cm 45 Caliber Type 94 main guns, which were the largest guns ever mounted on a warship. Neither ship survived the war.Units scale: meters.Textures: from 256×256 to 4096x4096Diffuse, Opacity.
-
USS Enterprise CV-6 3D Model
USS Enterprise (CV-6), was the seventh U.S. Navy vessel to bear the name. Colloquially called “the Big E”, she was the sixth aircraft carrier of the United States Navy. A Yorktown-class carrier, she was launched in 1936 and was one of only three American carriers commissioned before World War II to survive the war (the others being Saratoga and Ranger). She participated in more major actions of the war against Japan than any other United States ship. These actions included the Attack on Pearl Harbor (18 dive bombers of VS-6 were over the harbor, 6 were shot down with a loss of eleven men, making her the only American Aircraft carrier with men at Pearl Harbor during the Attack and the first to receive casualties during the Pacific War), the Battle of Midway, the Battle of the Eastern Solomons, the Battle of the Santa Cruz Islands, various other air-sea engagements during the Guadalcanal Campaign, the Battle of the Philippine Sea, and the Battle of Leyte Gulf. Enterprise earned 20 battle stars, the most for any U.S. warship in World War II, and was the most decorated U.S. ship of World War II, She is also the first American ship to sink an enemy vessel during the Pacific War, the sole surviving pilot of the six planes shot down over Pearl Harbor sank Japanese submarine I-70 on 10 December 1941. On three occasions during the Pacific War, the Japanese announced that she had been sunk in battle, resulting in her being named “The Grey Ghost”.Units scael: meters.Texture: from 256 to 4096x4096Diffuse, Opacity.
-
Aviso Comet Imperial German Navy 3D Model
ship warship destroyer frigate fregatte zerstörer zerstoerer aviso german navy deutsche marine comet meteor imperial hochseeflotte game sea simulator
-
Shokaku carrier 3D Model
Shokaku carrier Japanese aircraft Japan empire navy naval military warship ship ocean Pacific battleship battle world war II WW2 2 lowpoly Yamato game
-
Iver Huitfeldt Frigate LOD 1 3D Model
Frigate Iver Huitfeldt F361 Royal Danish Navy War Warship Class HDMS SAM ASW Baltic NATO Sim Ship Boat LOD Game Lowpoly Low Poly Level of Detail WEU DEMORA
-
USS Wayne E Meyer 3D Model
USS Wayne E. Meyer DDG 108 destroyer US Navy vessel Arleigh Burke Class ship ddg108 flight 2 a II IIa battleship warship USN ddg-108 battle amrican america USA war boat
-
HMS Goliath 3D Model
HMS Goliath world war 1898 Dreadnought Dardanelles Royal Navy Swiftsure class United Kingdom WW1 Heavy cruiser ship naval warship ww battleship boat
-
USS Ronald Reagan CVN 76 3D Model
USS Ronald Reagan CVN 76 CVN-76 CVN76 aircraft carrier US Navy battleship ship boat Nimitz supercarrier military warship flightdeck hangar
-
HSV-2 Swift Hybrid Catamaran 3D Model
HSV-2 HSV Swift Hybrid Catamaran combat ship boat battleship frigate US Navy High Speed Vessel Warship Military Littoral sea
-
Battleship 1 3D Model
old battleship boat galleon ship sailboat frigate warship steam steamer game low low-poly armored gun sail vessel battery chaloupe cannoniere war usa us
-
Small Cruiser Koenigsberg Class Imperial German Navy 3D Model
ship warship kriegsschiff cruiser kreuzer german navy deutsche marine hochseeflotte game sea simulator koenigsberg emden karlsruhe nuernberg
-
Iver Huitfeldt Frigate LOD 3D Model
Frigate Iver Huitfeldt F361 Royal Danish Navy War Warship Class HDMS SAM ASW Baltic NATO Sim Ship Boat LOD Game Lowpoly Low Poly Level of Detail WEU DEMORA
-
Battleship 3D Model
old battleship boat galleon ship sailboat frigate warship steam steamer game low low-poly armored gun sail vessel battery chaloupe cannoniere war usa us
-
Kyrenia Ship 3D Model
Ancient Greek Ship Athenian 300 War Oars Hellas Hellenic Warship Trireme Kyrenia merchant Cyprus Historical
-
USS Independence LCS-2 3D Model
An accurate highpoly model of the uss independence lcs-2 made with 3ds max 2014 and exported as FBX and OBJ so it can be used in any 3D software, the scale of this model is 1:1, this model do not includes textures. Must of the objects of the scene are made using meshsmooth or turbosmooth with 2 iteration so in case you need the model with less polys the client would only need to reduce the iteration to 1.
-
Battleship Yamato 3D Model
High quality low poly 3D model battleship Yamato for game ready and rendersBattleship has 2 reconnaissance seaplane Yokosuka E14YScale 1:1 in centimeters (263 meters)Units setup: centimetersTextures from 512×512 to 4096x4096Diffuse, Normal, PBR (gloss, metallic, ambient)
-
US Nuclear Submarine Ohio Class 3D Model
US Nuclear Submarine Ohio Class is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!US Nuclear Submarine Ohio Class is ready to be animated. You can easily position it the way you need or animate.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm- Photoshop (original texture files with all layers)*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes- OBJ (Multi Format)- 3DS (Multi Format)- Maya 2011- Cinema 4D R14- FBX (Multi Format)- Photoshop (original texture files with all layers)*********************************Textures Formats:- (6 .png) 8192 x 8192Also there are original texture files with all layers .PSD format in particular archive*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
IJN 17m Motor Boat 3D Model
Japanese ww2 motor boat.High detailed 3d model created with great accuracy based on available source pictures and technical drawings.
-
Admiral Kuznetsov Carrier 3D Model
3d Low poly model aircraft carriaer Admiral Kuznetsov for game ready.Textures: from 512 to 2048Diffuse, Nirmal, Opacity, Specular
-
Admiral Kuznetsov Carrier 3D Model
3d Low poly model aircraft carriaer Admiral Kuznetsov for game ready.Textures: from 512 to 2048Diffuse, Nirmal, Opacity, Specular
-
3D Sailing Ship Mast V3 3D Model
Detailed and textured 3d model of sailing ship mast.Previews were rendered with V-Ray.
-
Sailing Ship Mast V3 3D Model
Detailed and textured 3d model of sailing ship mast.Previews were rendered with V-Ray.
-
USS Lake Champlain CG-57 LP 3D Model
These models are built near to scale and are fully textured. They come with animateable weapons including Harpoon missiles, 5 automatic gun turrets, many radar and radio receiver antenna. They are available in many different formats.You cant go wrong with one of these for your 3d fleet! The Ticonderoga Class Cruiser was dubbed the Aegis cruiser by the media because it was the first ship equipped with the sophisticated weapons control system.There have been 28 of these vessels built from the 1970s through the early 1990s.The second variant (Cruisers CG49-CG58) in this class had upgraded electronics and superstructure. Third variant of the class included CG59-CG73 with upgraded missile launch systems.
-
3D USS Hue City CG-66 LP 3D Model
These models are built near to scale and are fully textured. They come with animateable weapons including Harpoon missiles, 5 automatic gun turrets, many radar and radio receiver antenna. They are available in many different formats.You cant go wrong with one of these for your 3d fleet! The Ticonderoga Class Cruiser was dubbed the Aegis cruiser by the media because it was the first ship equipped with the sophisticated weapons control system.There have been 28 of these vessels built from the 1970s through the early 1990s.The second variant (Cruisers CG49-CG58) in this class had upgraded electronics and superstructure. Third variant of the class included CG59-CG73 with upgraded missile launch systems
-
Warship 3d Model – INS Talwar (F40) 3D 3D Model
Low poly 3d model of INS Talwar (F40) is the lead ship of the Talwar-class frigates of the Indian Navy.This model is game ready model. This model is dived into 2 part because of texture. Both part has its own material with own texture. Each material has diffuse, glossy, specular and normal map. So there are total 8 (eight) texture map for 2 part of model.Texture size is 2048 x 2048. All textures are png format except the specular texture. Specular textures are TGA format.90% uv area of the model is non-overlap.
-
3D AtomShip model 3D Model
Atom Ship is designed for stealth bombing its got atomic booms attached front heavy duty machine gun seek missiles and other radio wave booms,this war ship is designed in great detail and its one of a kind it will be used in our game we are creating but anyone can also use it also.
-
Hovercraft – Military 3D 3D Model
1. Modeled in Blender.2. Image show & rendered using Cycle render.3. Some Material a Sub-Division before rendering.4. Included Light, Camera and support object.5. Convert to others format:- *.lws (LIGHTWAVE 3D) *.dae (COLLADA) *.obj (WAVEFRONT) *.3ds (3D Studio)
-
3D WWII Battleship Pack 3D Model
This package includes a battleship model with three texture sets.Battleship consists of(1) ship body(2) main gun(3) AA gun(4) flags(5) rudder(6) propeller(7) life boatAll parts can be rotated and animated.Ship’s body has 4K texture for diffuse, normal, specular, occlusion, secondary detail map.Ship’s parts has 1~2K PBR textures.Model states:Ship Body: verts 2625, faces 2161AA Gun: verts 208, faces 192Life Boat: verts 251, faces 163Main Gun: verts 524, faces 478Propeller: verts 490, faces 488Rudder: verts 16, faces 14Also included:- Three country flags for USA, Soviet Union, Germany- Flags are already configured with Unity built-in cloth physics for animation.- A double-sided shader for rendering flags.- A particle effect used as engine’s smoke for the shipHope you like it !
-
PFG2-1110 ROCS Tian Dan 3D model 3D Model
This frigate is high quality, high detail, polygonal model of the Cheng Kung Class Frigate. It is built nearly scale for an accurate representation of the original object. It looks very realistic and renders nicely without any special render software. It has a fully textured design that allows for close-up renders, and was originally modeled in 3ds Max 2013 and rendered with default scanline. Animateable features include missiles and launchers, deck gun, some radar and phalanx cannons. This model also comes in several different formatsThe Cheng Kung Class of Frigates are based upon US Oliver Hazard Perry Class. Ships were modified and then licensed to the Chinese for production for their own navy. The Cheng Kung Frigate is a smaller warship for escorting larger ships in task forces. ROCS Cheng Kung (, PFG2-1101) is the lead ship of eight Cheng Kung-class guided-missile frigates.Other countries also built this design including Australia, Spain and the US.
-
PFG2-1109 ROCS Chang Chien 3D Model
This frigate is high quality, high detail, polygonal model of the Cheng Kung Class Frigate. It is built nearly scale for an accurate representation of the original object. It looks very realistic and renders nicely without any special render software. It has a fully textured design that allows for close-up renders, and was originally modeled in 3ds Max 2013 and rendered with default scanline. Animateable features include missiles and launchers, deck gun, some radar and phalanx cannons. This model also comes in several different formatsThe Cheng Kung Class of Frigates are based upon US Oliver Hazard Perry Class. Ships were modified and then licensed to the Chinese for production for their own navy. The Cheng Kung Frigate is a smaller warship for escorting larger ships in task forces. ROCS Cheng Kung (, PFG2-1101) is the lead ship of eight Cheng Kung-class guided-missile frigates.Other countries also built this design including Australia, Spain and the US.
-
PFG2-1106 ROCS Yueh Fei model 3D Model
This frigate is high quality, high detail, polygonal model of the Cheng Kung Class Frigate. It is built nearly scale for an accurate representation of the original object. It looks very realistic and renders nicely without any special render software. It has a fully textured design that allows for close-up renders, and was originally modeled in 3ds Max 2013 and rendered with default scanline. Animateable features include missiles and launchers, deck gun, some radar and phalanx cannons. This model also comes in several different formatsThe Cheng Kung Class of Frigates are based upon US Oliver Hazard Perry Class. Ships were modified and then licensed to the Chinese for production for their own navy. The Cheng Kung Frigate is a smaller warship for escorting larger ships in task forces. ROCS Cheng Kung (, PFG2-1101) is the lead ship of eight Cheng Kung-class guided-missile frigates.Other countries also built this design including Australia, Spain and the US.
-
3D PFG2-1107 ROCS Tzu I 3D Model
This frigate is high quality, high detail, polygonal model of the Cheng Kung Class Frigate. It is built nearly scale for an accurate representation of the original object. It looks very realistic and renders nicely without any special render software. It has a fully textured design that allows for close-up renders, and was originally modeled in 3ds Max 2013 and rendered with default scanline. Animateable features include missiles and launchers, deck gun, some radar and phalanx cannons. This model also comes in several different formatsThe Cheng Kung Class of Frigates are based upon US Oliver Hazard Perry Class. Ships were modified and then licensed to the Chinese for production for their own navy. The Cheng Kung Frigate is a smaller warship for escorting larger ships in task forces. ROCS Cheng Kung (, PFG2-1101) is the lead ship of eight Cheng Kung-class guided-missile frigates.Other countries also built this design including Australia, Spain and the US.
-
Arleigh Burke Destroyer Donald Cook DDG-75 Rigged 3D Model
Arleigh Burke Destroyer Donald Cook DDG-75 Rigged is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!Arleigh Burke Destroyer Donald Cook DDG-75 is ready to be animated. You can easily position it the way you need or animate it the way your project requires using helpers in 3D Studio Max. See the turntable to get an idea of how animation works.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes*********************************Textures Formats:- (26 .png) 8192 x 8192*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
Arleigh Burke Destroyer Mahan DDG-72 Rigged 3D Model
Arleigh Burke Destroyer Mahan DDG-72 Rigged is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!Arleigh Burke Destroyer Mahan DDG-72 is ready to be animated. You can easily position it the way you need or animate it the way your project requires using helpers in 3D Studio Max. See the turntable to get an idea of how animation works.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes*********************************Textures Formats:- (26 .png) 8192 x 8192*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
Arleigh Burke Destroyer McFaul DDG-74 3D Model
Arleigh Burke Destroyer McFaul DDG-74 is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes- OBJ (Multi Format)- 3DS (Multi Format)- Maya 2011- Cinema 4D R14- FBX (Multi Format)*********************************Textures Formats:- (26 .png) 8192 x 8192*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
Arleigh Burke Destroyer Mahan DDG-72 3D Model
Arleigh Burke Destroyer Mahan DDG-72 is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes- OBJ (Multi Format)- 3DS (Multi Format)- Maya 2011- Cinema 4D R14- FBX (Multi Format)*********************************Textures Formats:- (26 .png) 8192 x 8192*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
Arleigh Burke Destroyer Higgins DDG-76 Rigged 3D Model
Arleigh Burke Destroyer Higgins DDG-76 Rigged is a high quality, photo real model that will enhance detail and realism to any of your rendering projects. The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2k render. Renders have no postprocessing.Hope you like it!Arleigh Burke Destroyer Higgins DDG-76 is ready to be animated. You can easily position it the way you need or animate it the way your project requires using helpers in 3D Studio Max. See the turntable to get an idea of how animation works.*********************************Features:- High quality polygonal model, correctly scaled for an accurate representation of the original object.- Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth function can be used to increase mesh resolution if necessary.)- All colors can be easily modified.- Model is fully textured with all materials applied.- All textures and materials are included and mapped in every format.- 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.- No part-name confusion when importing several models into a scene.- No cleaning up necessaryjust drop your models into the scene and start rendering.- No special plugin needed to open scene.- Model does not include any backgrounds or scenes used in preview images.- Units: cm*********************************File Formats:- 3ds Max 2012 V-Ray and standard materials scenes*********************************Textures Formats:- (26 .png) 8192 x 8192*********************************3d Molier International is a team of 3D artists with over a decade of experience in the field. The company participated in various projects allowing us to learn our clients needs. Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality, which you can tell by looking at the renders none of the has any postprocessing. On the top of that all the models come with complete UVs and optimized topology, which allows you in no time alter geo or the textures if needed.Also check out our other models, just click on our user name to see complete gallery. 3d_molier International 2017
-
Christopher Ship 3D Model
Christopher Columbus Santa Maria Nina Pinta 15th 16th Century Ship Water History America Usa boat warship sailing naval ocean pirate vessel
-
Super Freighter 3D model 3D Model
ship freighter cargo container commercial watercraft Sailing Frigate warship boat sea ocean historical britton merchant sail pirate tall BAHRAIN
-
Sailing Frigate 3D Model
Sailing Frigate ship warship boat sea ocean historical historic britton merchant sail pirate tall navy vessel mast cannon sailboat 3d model max 3ds
-
Military Control Panel 3D Model
High quality, fully textured model of military control panel. Perfect edge-loop modeling, UW-mapping and texture maps (diffuse, specular, bump/displacement).All textures – 4096 x 4096 px.Optimal polygons density.All textures and materials are included.Real-world scale.Unit: meters.Originally modelled in 3ds max 2012.Final images rendered with Vray 2.3.Hope you like it! Also check out my other models, just click on my user name to see complete gallery.
-
Spanish warship Santisima Trinidad 3D Model
Low poly model of spanish warship
Include textures. Game model
Formats: -blend, -max. -3DS, -fbx, obj
You can “touch” model here: https://www.artstation.com/artwork/GZvON
Sant?sima Trinidad (officially named Sant?sima Trinidad by Royal Order on 12 March 1768, nicknamed La Real and sometimes confused with the Manila galleon Sant?sima Trinidad y Nuestra Se?ora del Buen Fin) was a Spanish first-rate ship of the line of 112 guns, which was increased in 1795–96 to 130 guns by closing in the spar deck between the quarterdeck and forecastle, and around 1802 to 140 guns, thus creating what was in effect a continuous fourth gundeck although the extra guns added were actually relatively small. She was the heaviest-armed ship in the world when rebuilt, and bore the most guns of any ship of the line outfitted in the Age of Sail.
