Download Free 3D Model Wall Hanger for Master Sword and Hylian Shield 3D Print Model

Summary
I designed a very simple wall hanger for two very helpful tools for combat. I actually made Adafruit’s Hylian Shield (https://www.thingiverse.com/thing:824544) and ChaosCoreTech’s Master Sword Designs (https://www.thingiverse.com/thing:1449187) just for fun, but I thought that hanging the two prints in my room would be cool. So i designed the hanger with the sword being held at a 30 degree angle.
Just a little disclaimer: Currently with my design the shield is drooping down from the top a little bit from what I would like, but nonetheless still looks amazing to have in the room. Mainly I wanted to show this display method can be done: Try this design if you want. I failed to insert a folded notecard to tighten the shield and holder, so I will probably work on making the handle part of the wall hanger tighter in my design.
Print Settings
Printer:
Monoprice Maker Select V2 Rafts:
No Supports:
Yes Resolution:
.30 Infill:
20 Notes:
If you do print this, be wary that this is a work in progress as explained above, and that you probably want a decently strong hanger to support holding both a shield and sword, which requires more plastic to print the infill/ shell thickness. This print also needs “supports” set to everywhere if you use Cura.
Rotate the object so that the “handle holder” part is flush with the bed. Your printer should only print supports for the top of the handle holder. I’m not sure why Solidworks exports STLs in a different orientation when I designed this with the correct positioning.
I felt comfortable having the shell thickness to be 2 mm, and its holding fine. Printed in pla grey plastic with extruder 215 c and bed 60 c