Download Free 3D Model The Most Awesome Glass Plate Holder Ever 3D Print Model

Summary
The Most Awesome Glass Plate Holder Ever.
The bed dimensions are 230mm x 150mm and the clips will fit multiple makerbot dual clones or printers using the same bed configuration.
Recommended
There are two versions of the left side clip. The second versions are the last four stl. files. The modified version features a lever that is used to pull the clip back. This option enables the user to use the left index finger to compress the springs on the left side clip and with the glass in the right hand align the front edge of the glass to front clips and push into place.
Print Settings
Printer:
QIDI Tech Rafts:
No Supports:
Yes Resolution:
.2-.3mm Infill:
5%-10%
Post-Printing
Post Process
All mechanical parts must be cleaned, filed, sanded, and fitted. The parts should slide easily with very little to no resistance without creating too much play.

Custom Section
Hardware
The screws are 2.5mm-2.75mm wood or plastic screw with coarse thread. The springs are compression springs 7mm x 12.5mm x .5mm wire Diameter. There are a number of screw kits and compression spring kits available for purchase on Amazon.
Custom Section
Please Say You Make One
Print it, use it, and show you make one please.