Download Free 3D Model MPCNC EndStop Mount 3D Print Model

Summary
I bought physical switch endstops and didn’t like any of the existing versions. So I made my own from scratch. The End Stops sit snuggly into the trays using pegs to hold them straight. You could drop a tab of hot glue to hold VERY securely if you like.
I used this End Stop
https://www.amazon.com/gp/product/B017GXU0IK/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Resolution:
.15 Infill:
20% Notes:
I had to use supports at first, because I did not pay any attention to how it might need to be printed. If you have good cooling and are an overhang master, maybe you can go without. If you do use supports, I had them stood away from the model by .2 mm so they were easy to detatch
Post-Printing

Y-Axis Top

X-Axis Top

Bottom Ring for both

How I Designed This
Used Fusion 360
This uses nuts and bolts to assemble, used #6 thread in my case because it’s what I had.