3DHunt.co

Tag: Endstop

  • tutor endstop z chasis acero 3D Print Model

    tutor endstop z chasis acero 3D Print Model

    Summary
    facilita el acceso al endstop del eje z
    Print Settings
    Printer:
    rojo 3d allmetal i3
    How I Designed This
    solidworks

  • 8mm rod endstop switch mount 3D Print Model

    8mm rod endstop switch mount 3D Print Model

    Summary
    Adjustable endstop switch mount for an 8mm rod. Used on my knock-off Prusa i3

  • MPCNC EndStop Mount 3D Print Model

    MPCNC EndStop Mount 3D Print Model

    Summary
    I bought physical switch endstops and didn’t like any of the existing versions. So I made my own from scratch. The End Stops sit snuggly into the trays using pegs to hold them straight. You could drop a tab of hot glue to hold VERY securely if you like.
    I used this End Stop

    Print Settings
    Printer Brand:
    Prusa Printer:
    i3 MK2S Rafts:
    No Supports:
    Yes Resolution:
    .15 Infill:
    20% Notes:
    I had to use supports at first, because I did not pay any attention to how it might need to be printed. If you have good cooling and are an overhang master, maybe you can go without. If you do use supports, I had them stood away from the model by .2 mm so they were easy to detatch
    Post-Printing

    Y-Axis Top

    X-Axis Top

    Bottom Ring for both

    How I Designed This
    Used Fusion 360
    This uses nuts and bolts to assemble, used #6 thread in my case because it’s what I had.

  • Adjustable endstop 3D Print Model

    Adjustable endstop 3D Print Model

    Summary
    ok so I wanted to have an adjustable Z endstop for my tronxy X3 and seeing as how I couldn’t find one I liked and would really work with my X3 I went ahead and remixed one I found on here…. The third part of this I didn’t remix I have not printed any of this yet as my printers printing other items, But I’m hoping it will all work together to allow minor adjustments without any chance of messing things up.
    Let me know if this works for you… I hope to be printing soon then mount it on the printer for test.
    I forgot to rotate the mount for ease of printing so you’ll need to do that.
    Print Settings
    Printer:
    tronxy X3 Notes:
    normal printer settings should work good.
    How I Designed This
    this was fully done with tinkercad for ease and speed.

  • Endstop Mounting 3D Print Model

    Endstop Mounting 3D Print Model

    Summary
    This part is used for endstop mounting and designed to fit with 2020 alu profiles. It can used for various types of printers and has 4 holes to fit with M3 screws.