Download Free 3D Model Cable Management & Switch Upgrade for STARTT (TronXY-100) 3D Print Model

Summary
If you are like me and own a STARTT printer you know that the cable management for this printer can use some work. I spent some time trying to use as much of the supplied hardware as I could to route wires and came up with the routing shown in the images. It works very well and drastically cleans things up. To take it a step further I printed a box that hooks to the back of the printer so I could hide the excess wires running to the circuit board.
Additionally, the only way to power the printer off is to unplug from the wall or barrel connector. This is a pain and not good on the machine so I added a LED switch that I purchased from O’Reilly auto store rated at 30amps which is a little overkill, but works great.
Some of the images posted are just to show how I routed the wires and secured the wire bundles in case others are struggling to find a good solution with cable management for this printer.
I had some issues with warping on the parts, but they are functional and look way better than a rats nest of wires. May reprint in the future.
Note: All parts printed with PLA
Print Settings
Printer:
STARTT Rafts:
Yes Supports:
No Resolution:
0.2mm Infill:
10%