he 3D model of the Aluminium Management Chair.Originally created with Blender Cycles.Available formats:Blender (.blend);LightWave (.lwo);Autodesk FBX (.fbx);OBJ (.obj).All parts of the model united by materials.This model is suitable for use in interior design, high-res film close-up, Advertising, design visualization, etc.
Tag: management
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:496.0 mm 388.0 mm 98.0 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:574.0 mm 344.0 mm 19.0 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm: 642.0 mm 242.0 mm 26.0 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:3125 mm 390 mm 390 mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:480 mm 130 mm 35 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:480 mm 130 mm 35 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:480 mm 130 mm 35 mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 80,0mmWidth 80,0mmthickness 430,0mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 700,0mmWidth 90,0mmthickness 21,0mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 250,0mmWidth 250,0mmthickness 16,0mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 250,0mmWidth 250,0mmthickness 22,0mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 305,0mmWidth 301,0mmthickness 12,0mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 645,0mmWidth 135,0mmthickness 36,0mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Diametr 200,0 mmthickness 15,0mm
-
Decoration element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 610,0mmWidth 130,0mmthickness 22,0mm
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 115,0mmWidth 620,0mmthickness 20,0mm
-
IKEA Markus Office Chair 3D Model
ikea markus office chair swivel armchair seat furniture seating ergonomic vray 3d model meeting room boardroom conference desk management work modern
-
Decorative element 3D Model
A set of decor for 3D printers and numerically controlled machinesComes with formats obj, max14 , stl
-
WDSz Regina 3D Model
WDSz Regina – division management machine WDSz.Regimental carriage staff for Regina. This is a key vehicle for effective fire performance. Coordinates data transfers and provides connectivity between lower and higher levels of command. It’s a link in the automated command system. It houses 3 operator consoles, essential terminals and radios, a GPS navigation system and power supply systems.
-
Wire Management Clip 3D Print Model
Summary
This is a simple wire clip, made to be stuck down to a table or the wall with some 3M double sided foam tape. Simply cut the tape down to the side of base of the clip (14×14 mm)
I personally use one under my bedside table to hold my USB-C cord, so when I unplug my phone, the cord doesn’t fall onto the floor. I also use one on my wall to hold my micro USB cable for my LG Tones. -
Frame for mirror 3D Model
model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:1400*900*30
-
Frame for mirror 3D Model
model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:800*600*50Please rate and write the review of our model
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:70*70*10Please rate and write the review of our model
-
The curbstone is an entrance hall 3D Model
The curbstone is an entrance hallmodel for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programPlease rate and write the review of our model
-
Cable Management & Switch Upgrade for STARTT (TronXY-100) 3D Print Model
Summary
If you are like me and own a STARTT printer you know that the cable management for this printer can use some work. I spent some time trying to use as much of the supplied hardware as I could to route wires and came up with the routing shown in the images. It works very well and drastically cleans things up. To take it a step further I printed a box that hooks to the back of the printer so I could hide the excess wires running to the circuit board.
Additionally, the only way to power the printer off is to unplug from the wall or barrel connector. This is a pain and not good on the machine so I added a LED switch that I purchased from O’Reilly auto store rated at 30amps which is a little overkill, but works great.
Some of the images posted are just to show how I routed the wires and secured the wire bundles in case others are struggling to find a good solution with cable management for this printer.
I had some issues with warping on the parts, but they are functional and look way better than a rats nest of wires. May reprint in the future.
Note: All parts printed with PLA
Print Settings
Printer:
STARTT Rafts:
Yes Supports:
No Resolution:
0.2mm Infill:
10% -
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:2000*60*20Please rate and write the review of our model
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 60.0mmWidth 60.0mmthickness 15.0mmPlease rate and write the review of our model
-
Decorative element 3D Model
Decorative element.model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settingsThe STL format is ready for printing or for the ArtCAM programSize of model in mm:Height 50 mmWidth 50 mmthickness 8 mmPlease rate and write the review of our model
-
Decoration element Free 3D Model
Decorative element.
model for tool with numeric programme managementTo reduce or increase polygons, use the TurboSmooth settings
The STL format is ready for printing or for the ArtCAM program
Size of model in mm:
Height 650,0mm
Width 180,0mm
thickness 20,0mmPlease rate and write the review of our model -
Decorative element Free 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
The STL format is ready for printing or for the ArtCAM program
Size of model in mm:
Height 65mm
Width 65mm
thickness 8,0mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
The STL format is ready for printing or for the ArtCAM program
Size of model in mm:
Height 84.0mm
Width 84.0mm
thickness 12.7mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
Size of model in mm:
Height 100,0mm
Width 100,0mm
thickness 19,0mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
Size of model in mm:
Height 600.0mm
Width 54,5mm
thickness 14,5mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
Size of model in mm:
Height 96.0mm
Width 93.0mm
thickness 21.0mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
To reduce or increase polygons, use the TurboSmooth settings
Size of model in mm:
Height 100,0mm
Width 100,0mm
thickness 19,0mm
Please rate and write the review of our model -
Decorative element 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 100,0mm
Width 100,0mm
thickness 19,0mmPlease rate and write the review of our model -
Decorative element Free 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 100,0mm
Width 100,0mm
thickness 19,0mmPlease rate and write the review of our model -
Decoration element 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 90,0mm
Width 260,0mm
thickness 10,0mmPlease rate and write the review of our model -
Decoration element 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 110,0mm
Width 660,0mm
thickness 9,0mmPlease rate and write the review of our model -
Decoration element 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 650,0mm
Width 180,0mm
thickness 20,0mmPlease rate and write the review of our model -
Decoration element 3D Model
Decorative element.
model for tool with numeric programme management
Size of model in mm:
Height 650,0mm
Width 180,0mm
thickness 20,0mmPlease rate and write the review of our model
