Download Free 3D Model BabyNES RasPi B+ case remix 3D Print Model

Summary
Shoutout to jrebeiro for the design!
I originally wanted to add a spare 30mm fan to the top of this case. And while it is possible with a raspberry pi 3, it isn’t really necessary. After doing some reading online, it doesn’t seem like I could ever get the Pi hot enough to cause performance issues. So I opted to add another vent instead. The Raspberry Pi cutout sits just above and slightly off-center from the Pi’s processor. I didn’t want to damage the integrity of the original design, and to be honest I prefer how this looks.
Happy printing!
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
20 Notes:
Printed in PLA
205 print temp
70 bed temp
Post-Printing
There are 4 holes that run from the bottom of the case almost to the top.
I stuck in pieces of 1.75 mm filament and broke them off and then extruded extra filament into the holes and smoothed it with my fingers.
It won’t create an unbreakable seal, but it will allow you to pick up the case without it falling apart.
Painted with acrylic paint.
(Not to perfect color/paint area specifications for you nit-pickers out there)