Baphomet B from the game Agomy.
Tag: b
-
1932 Ford Model B (The_Twelve) 3D Model
3D модель постапокалиптического автомобиля из игры “Mad Max”Карты спекуляра, эмбиент оклюжн и т.д. в каналах текстуры “Tex_XXXX_2.dds”Возможные багипроблемы в автомобиле:Рессоры и амортизаторы в “прижатом” состоянииРазмер колес не соответствуют оригиналу(масштабировал на глаз)Возможно потребуется поправить uv координаты некоторых деталей
-
Geeetech i3 Pro B Top Z Bracket with M8 Support. 3D Print Model
Summary
Have some left over M8 all-thread after upgrading to lead screws? This might be the perfect up-cycle option for them
Print Settings
Printer:
Geeetech i3Pro B
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
.2
Infill:
30 -
Cover USB Type B 3D Print Model
Summary
Cover USB Type B -
Guitar Pick (B) 3D Print Model
Summary
I made this guitar pick hope you like it!!
Give feed back btw
Print setting
layer height 0.2
fill density 100%
platform brim -
CTC PRUSA i3 Pro B Bowden Drive with Autoleveling 3D Print Model
Summary
My CTC hotend broke and I was without a 3D printer. Luckily I am in the process of building a HEVO and therefore I had the mount, hotend, extruder, retainer and duct already on hand. By drilling two extra holes and removing a little plastic near the X endstop flag in the mount, I made it fit the CTC carriage perfectly. Again, since my printer was down, I didn’t design this in CAD and just modified the piece I had by hand and then created the STL for thingiverse so no guarantees that it will fit. I left a bridge in there for support that you will have to break out and I put in two mounting options; one way the way I mounted it by drilling holes, and another for mounting it with M3 brass fittings to lower the mount closer to the bed. The HEVO mount has the proximity probe spot already, so I figured I should add that sensor as well.
If you are ready for a double mod, keep reading…
Items Needed:
Soldering Iron
several connectors
connector wires (from breadboard)
Arduino IDE
an extra Arduino as ISP to update the bootloader on the CTC Aduino
Marlin firmware
BOM:1 x 5V NPN M12 inductive sensorhttps://www.aliexpress.com/item/M12-4mm-detection-5VDC-NPN-NO-LJ12A3-4-Z-BX-5V-cylinder-inductive-proximity-sensor-switch/32553311139.html?spm=2114.13010608.0.0.iDrnoz
3D Printer Accessories V6 J-Head Hotend RepRap Extruder for 1.75mm Filament, Direct Feed or Bowden. w/ 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube
ALPTAhttp://a.co/9PxYSl48.5″ x 8.5″ galvanized 28ga metal plate to place between the hotbed and glass plate. This ensures that the sensor is triggered properly. Without it you will need to either not use glass or you are going to be very close to the nozzle level. Ferrous metals are the best at triggering proximity sensors, that’s why I didn’t use aluminium.
8.5″ x 8.5″ x 0.880″ glass plate. I prefer to print on glass.
Extruder of your choice (e.g. find one on thingiverse)
ProcessPrepare and install your material for your heat bed. Cut the galvanized plate with some metal shears to size. IMPORTANT: make sure the metal does not short out any contacts on the heated bed. You need to cut around those areas!.
Get the glass plate from your a hardware store. They will cut it to size if you ask nicely. You need the corners angled to have room for the screw heads.
Prepare and install the J hotend and proximity sensor with the extruder mount, retainer and duct from the HEVO project.
Solder the 5V and Ground connections to the board. I chose to use add a connector for easy disconnect.
Make a backup of the original settings. These were mine:
15:07:46.286 : echo:Hardcoded Default Settings Loaded
15:07:46.286 : echo:Steps per unit:
15:07:46.287 : echo: M92 X78.74 Y78.74 Z2560.00 E105.00
15:07:46.287 : echo:Maximum feedrates (mm/s):
15:07:46.287 : echo: M203 X400.00 Y400.00 Z2.00 E45.00
15:07:46.287 : echo:Maximum Acceleration (mm/s2):
15:07:46.287 : echo: M201 X1400 Y1400 Z100 E80000
15:07:46.287 : echo:Acceleration: S=acceleration, T=retract acceleration
15:07:46.287 : echo: M204 S1400.00 T5000.00
15:07:46.287 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
15:07:46.287 : echo: M205 S0.00 T0.00 B20000 X13.50 Z0.30 E5.00
15:07:46.287 : echo:Home offset (mm):
15:07:46.287 : echo: M206 X0.00 Y0.00 Z0.00
15:07:46.287 : echo:PID settings:
15:07:46.287 : echo: M301 P19.86 I1.00 D98.93Upgrade your bootloader. Here is how to do it:
Time to download, configure and install Marlin. Use the GEEETECH example in the examples folder as a base. I attached my Configuration.h file here for reference with auto leveling enabled: https://www.thingiverse.com/download:4494314 . Using this config will consume 94% of the memory. So there is hardly anything left for additional features.
Last but not least make sure you adjust the z-axis in the LCD until you get the nozzle in the correct location (mine was -0.25). Then make sure you save your settings.
*ANOTHER BENEFIT of UPGRADING YOUR FIRMWARE**
The CTC is over-extruding (at least mine was). In Cura I had set the correction in the start script, but with the new firmware I changed the E stepper from 105 to 95 in the configuration.h, so no more start code fix needed! -
BabyNES RasPi B+ case remix 3D Print Model
Summary
Shoutout to jrebeiro for the design!
I originally wanted to add a spare 30mm fan to the top of this case. And while it is possible with a raspberry pi 3, it isn’t really necessary. After doing some reading online, it doesn’t seem like I could ever get the Pi hot enough to cause performance issues. So I opted to add another vent instead. The Raspberry Pi cutout sits just above and slightly off-center from the Pi’s processor. I didn’t want to damage the integrity of the original design, and to be honest I prefer how this looks.
Happy printing!
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
20 Notes:
Printed in PLA
205 print temp
70 bed temp
Post-Printing
There are 4 holes that run from the bottom of the case almost to the top.
I stuck in pieces of 1.75 mm filament and broke them off and then extruded extra filament into the holes and smoothed it with my fingers.
It won’t create an unbreakable seal, but it will allow you to pick up the case without it falling apart.
Painted with acrylic paint.
(Not to perfect color/paint area specifications for you nit-pickers out there) -
Geeetech i3 Pro B LCD holder 3D Print Model
Summary
This is a modification of original Prusa LCD holder for Geeetech i3 Pro B (acrylic). While original Prusa has LCD mounted on front of the printer on two rods, i3 Pro B has LCD mounted on top of the printer. I moved LCD to the front as well and modified LCD holder to fit on two layers of 8mm acrylic there.
LCD supports (A and B) has been modified to fit i3 Pro B.
LCD cover and LCD knob is the same as original Prusa https://github.com/prusa3d/Original-Prusa-i3/tree/MK2/Printed-Parts/stl
LCD cable holders are resized to fit threaded rod Geeetech has (mine on i3 has 9.5mm outside diameter, original Prusa use 10mm rods).
The assembly is the same as original -http://manual.prusa3d.com/Guide/6.+LCD+assembly/300
The rotary encoder and reset button on i3 are too long, it’s necessary to cut reset button by about 5mm and encoder rod by about 7mm so it fits to LCD cover. Measure twice before cutting, the length might depend on which Chinese clone you have.
Print Settings
Printer:
Geeetech i3 Pro B Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% Notes:
printed in PETG -
Fiat 1100 B 1949 3D Model
The 3d model based on a real car, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
CTC Prusa i3 Pro B (E3D V6 Mount w/ Radial Fan mount) 3D Print Model
Summary
Created using TinkerCAD.
This mount was created to allow a 40mm radial fan to be attached to the front of the mount. The mount connects to the original carriage. It allows for a zip tie to be placed in order to hold all wiring.
Print Settings
Printer:
CTC Prusa I3 Rafts:
No Supports:
Yes Resolution:
.3mm Infill:
60% Notes:
Rotate top 180 degrees for the print. -
Mimic Modular Sofa Comp B 3D Model
One purchase gives access to all file formats available. By default only .max file format is selected for download.
-
Skoda Superb liftback 2016 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Opel Zafira (B) 2009 3D Model
The 3d model based on a real van, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
Nebulon-B Medical Frigate 3D model Free 3D Model
This is a low-poly Nebulon-B Medical Frigate suitable as a game asset.Contains FBX and unity package format. Textures, normal and emissive maps are included.The screen shots are showing the unity package, if importing the FBX provided textures and maps may have to be applied manually.The engine effects shown in the screen shots are only included in the unity format.The red stripes along the sides of the ship are a separate material, making it possible to tune the color in a game engine.Because this is a medical frigate, it has no hangar bays or mounted weapons.
-
Mercedes-Benz B-Class 2016 VRAY 3D Model
————————————————————————————— High detailed model created by SQUIR team.—————————————————————————————Ready to render at 3dsmax with VRAY.It was rendered at 3dsmax 2015 with vray3.20Rendering scene with all lightning, materials, background setups is included. 3dsmax 2010 format is also included, but without the rendering setups.All of our models was made on the 3dsmax, and we are able to provide uncollapsed modifier stack only for the 3dsmax, but if you’d need the lower polygon version at other programs, please contact with the support, and we will convert the reduced mesh to requested format. For this product there’s 3 different 3dsmax files included.’Set’ is uncollapsed, it’s a file where you can make changes at the model. ‘Hipoly’ is collapsed to hipoly with all the modifiers history cleaned to make it trouble free while using at other programs’Studio’ is the file with all rendering setups that we used to make the previews renderings.Because of different Disk topology at different computers it might be required to change the textures path at the destination computer.————————————————————————————— Thank you for buying SQUIR models—————————————————————————————
-
3D Mercedes-Benz B-Class AMG 2016 VRAY model 3D Model
————————————————————————————— High detailed model created by SQUIR team.—————————————————————————————Ready to render at 3dsmax with VRAY.It was rendered at 3dsmax 2015 with vray3.20Rendering scene with all lightning, materials, background setups is included. 3dsmax 2010 format is also included, but without the rendering setups.All of our models was made on the 3dsmax, and we are able to provide uncollapsed modifier stack only for the 3dsmax, but if you’d need the lower polygon version at other programs, please contact with the support, and we will convert the reduced mesh to requested format. For this product there’s 3 different 3dsmax files included.’Set’ is uncollapsed, it’s a file where you can make changes at the model. ‘Hipoly’ is collapsed to hipoly with all the modifiers history cleaned to make it trouble free while using at other programs’Studio’ is the file with all rendering setups that we used to make the previews renderings.Because of different Disk topology at different computers it might be required to change the textures path at the destination computer.————————————————————————————— Thank you for buying SQUIR models—————————————————————————————
-
Bugatti Type 35 1925-1929 VRAY 3D model 3D Model
————————————————————————————— High detailed model created by SQUIR team.—————————————————————————————Ready to render at 3dsmax with VRAY.It was rendered at 3dsmax 2015 with vray3.20Rendering scene with all lightning, materials, background setups is included. 3dsmax 2010 format is also included, but without the rendering setups.All of our models was made on the 3dsmax, and we are able to provide uncollapsed modifier stack only for the 3dsmax, but if you’d need the lower polygon version at other programs, please contact with the support, and we will convert the reduced mesh to requested format. For this product there’s 3 different 3dsmax files included.’Set’ is uncollapsed, it’s a file where you can make changes at the model. ‘Hipoly’ is collapsed to hipoly with all the modifiers history cleaned to make it trouble free while using at other programs’Studio’ is the file with all rendering setups that we used to make the previews renderings.Because of different Disk topology at different computers it might be required to change the textures path at the destination computer.————————————————————————————— Thank you for buying SQUIR models—————————————————————————————
-
Uncino B Chair 3D model 3D Model
Highly detailed 3d model of Mattiazzi Uncino B ChairHigh resolution Textures maps included.Rendered in Vray.Great For Closeups.**Available in FBX, 3DS, DWG ,Max 2017, Max 2014all files found working on several pc`s**your opinion matters to me so please take a min` and rate this product.
-
3D Bunk Bed for Children model
High quality model.Open and renders without errors.The software version is 3ds Max 2013, V-Ray adv and the RAR file includes a max fileInclude Formats:.max.3ds.fbx.0bjGuarantee! No Photoshop use in ViewsMoney back Guarantee(Turbo squid refund policy)Please visit my profile for more free and cheap models in high quality.
-
Raspberry Pi 3 model B case
Summary
I use Raspberry Pi as my digital audio player. So I like Raspberry Pi has a Hi-End audio machine look case.
It is easy to assembly, just look pictures you will know how to.
Note: you need prepare 8 pcs M3 screw for top and bottom cover.
Print pillar.stl 3 pcs + pillarUSB.stl 1 pcs; pillarUSB.stl must fix to USB connector side.
Print top-cap1.stl, top-cap2.stl *4 pcs
Others print 1 pcs.
Print Settings
Printer Brand:
RepRap Printer:
RepRap Ord Bot Hadron Rafts:
No Supports:
No Resolution:
0.1mm Infill:
30%
Post-Printing -
3D LowPoly street
Cartoon street is a customizable, mobile-friendly low-poly asset containing many elements that can be used to create a street (town) with a nice cartoon style.All road tiles are tileable. Objects: -six different buildings -Bench -Fire hydrant -Street light Trash can -Transmission tower -five different cars -three different road tiles -Tree -traffic light -player
