Download Free 3D Model AFTERGLOW PS4 headset strap FIX 3D Print Model

Summary
link to the fix post on my IG (https://www.instagram.com/p/BUeXSMAjafw/?hl=en&taken-by=codename.ide) This is one of those i cant believe it worked prints…i was an amateur…we learn every day! Non the less it will print with supports and when installing on headset keep in mind that you will have to cut headset plastic by the screws to release the wire from the strap….no need to add the metal support strap the headset comes with…the print is very sturdy and retains its shape with enough flexibility to give you a comfortable fit but strong enough to maintain its position on the users head.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Yes Supports:
Yes Resolution:
.1mm Infill:
zigzag at around 15-30% Notes:
This is only the top strap for the afterglow headset… Open with slicer and set print to adequate wall size 1 mm, inner wall outer wall…keep in mind for flexibility you need spacing between the ZIGZAG infill at 15-30%..REMEMBER, keep FLEXIBILITY in mind when tweaking settings..by all means this print CAN NOT BE A SOLID INFILL..
How I Designed This
i BASICALLY measured the straps position from a to b at the base of the straps standing up on both ends then i went with how high the arch went and designed from those parameters with a digital caliper that measures measuring to the tenth of a mm and from edge to edge, measuring heights of holes and angles and how far somthing is from edges…got prety close by first printing a corner of the hole area were screws go into and made sure the size and angles were on point, made proper tweaks, reprint a sample and went with it….it works, chek link… im happy…