Summary
Rear seat release handle for Dodge Shadow and Dodge Lancer cars.
Please abide by the license agreement.
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
P Body Seat Latch 3D Print Model
-
Pièce pour Hyper Master Mind 3D Print Model
Summary
Entretoise moyenne pour pion du jeu Hyper Master Mind (Mean Spacer for Master mind game pawn). -
Ohrenspritzenträger / ear syringe holder 3D Print Model
Summary
Ein Halter für ein Ohrenspritzenball, bei dem die restliche Feuchtigkeit abtropfen kann.
A holder for an ear syringe ball, where the remaining moisture can drip off.
Print Settings
Printer:
CTC
Rafts:
No
Supports:
No
Resolution:
0,1 mm
Infill:
15 %
Notes:
PLA -
lock with wire clip for Creality Ender 2 wire chain 3D Print Model
Summary
I remixed the lock of the Ender Cable Chain by ninne (https://www.thingiverse.com/thing:2498801) with the clamp of the bowden wire clips by Evanrude (https://www.thingiverse.com/thing:2328449) to attach the hot bed cable to the chain. It prevents the hot bed calbe from scrubbing the chain and the power cable. -
open cable chain 3D Print Model
Summary
This is a 10 x 15 open style cable chain with a radius of 18 degrees for best performance print in nylon. here is a video showing the assembly of the links.
IF YOU LIKE THE DESIGN AND WILL LIKE TO SEE MORE STUFF LIKE THIS PLEASE LEAVE A COMMENT BELOW, ALSO DON’T HESITATE TO CONTRIBUTE WITH A TIP
Print Settings
Printer:
ft-5, flash forge creator pro
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
50%
Notes:
This has very high tolerance so make sure your printer is calibrate and has a very good cooling fan i have printed this an test so i know it work as it should
How I Designed This -
Improved corgi 4x leash hook 3D Print Model
Summary
First I’ve found and printed this hook: https://www.thingiverse.com/thing:285782
The PLA version was able to withstand my puppy pulling on the leash for about 3 days, then the hooks started breaking off. I’ve made another one in PETG, that one successfully served its purpose for about 2 weeks. Then I realized that there’s a weak spot where the hooks connect to the plate. So I decided to design my own. Basically this is the same overall shape and size, but the hooks and the plate are thicker and I’ve filleted the joint between the hooks and the plate. Also this one has twice as many corgis 🙂
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2 mm
Infill:
30-50%
Notes:
For better strength print in PETG -
Oral-B Tooth Brush Cover and Wall Mount 3D Print Model
Summary
::::: Caution :::::: This item has a few very thin slice areas. Must be printed with no more than a .25mm height or thickness. Any thicker it will not print the hinges.
Print and then fold up the top and dab a bit of supper glue to firmly connect the top part of cover. The hinge will last a long time if the cover top is just snapped up and toothbrush removed. Flipping the cover up and all the way over will soon break it. Should not need blow drier for heat on the hinge. The other mount piece would be for mounting on a wall. Mount it and then use double stick tape on the cover.
Hope you enjoy. Happy printing !! 🙂 -
Balcony 3D Model
Additional Info: Balcony Arabic N281217 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Armchair 3D Model
Additional Info: Armchair Vermont N010118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Locker nightstand decor vase and flowers 3D Collection
Locker nightstand decor vase and flowers 3d Models
-
Jewelry hanging arm hook 3D Print Model
Summary
這是一個首飾掛臂鈎，這個小零件的設計是把有外包裝的首飾能懸掛在5mm厚的板上。物件尺寸：029mm(w) x 35mm(h) x 45mm(d)。
This is a jewelry hanging arm hook, this small part is designed to be overhang jewelry hanging on the 5mm thick board.Object size: 29mm (w) x 35mm (h) x 45mm (d). -
TEVO Tornado Ultrabase Upgrade Remix with cable strain relief 3D Print Model
Summary
Clamps to attach Anycubic Ultrabase to the Tevo Tornado.
Added cable strain relief to the rear left part.
Remixed this https://www.thingiverse.com/thing:2782720 and this https://www.thingiverse.com/thing:2748197 things. -
Jewelry display#2 3D Print Model
Summary
這是我第二個設計的首飾展示架，它的特點在於可以把最上的零件拆下及更換其他不同形狀的零件，而在弧形的上方可以加上絨毛布防止飾品滑下，在前下方的凹陷位位置是設計來放置貨品介紹的牌。物件尺寸：50mm(w) x 80mm(h) x 60mm(d), 厚度是 2mm。
This is my second design jewelry display stand, which is characterized by the top parts can be removed and replaced with other parts of different shapes, and in the top of the arc can be added fluff cloth to prevent the jewelry slide down in front of the bottom The recessed position is the card that is designed to place the item introduction.Object size: 50mm (w) x 80mm (h) x 60mm (d), the thickness is 2mm. -
Parametric Sine Design V1 3D Print Model
Summary
Diseño paramétrico realizado con Rhinoceros5 + grashopper -
ZAV ReArm mount 3D Print Model
Summary
ZAV ReArm board mount
Print Settings
Printer:
ZAV
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30 -
Snow Stake Medium 3D Print Model
Summary
A two part medium sized snow stake. To assemble put the smaller piece (the one with the numbers) into the hole in the larger piece. It will fit for a accurate measurement. -
Small Snow Stake 3D Print Model
Summary
A two part small sized snow stake. To assemble put the smaller piece (the one with the numbers) into the hole in the larger piece. It will fit for a accurate measurement. -
Ⅎɐɔʇoɹᴉo 3D Print Model
Summary
No special settings required!
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
.2
Infill:
15 -
GoPro Session 5 protector cap 3D Print Model
Summary
Gopro Session Cap to hold your camera in place. Print in TPU. This was designed for the seesion and has a front and back lip that locks the camera in place. Does not show in superview. I have never had an eject with this cap. -
Guitar 3D Model
Additional Info: Guitar Ibanez JEM N160118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Lucky Clover Soap Box and Coaster 3D Print Model
Summary
Lucky Clover Soap Box and Coaster
Print Settings
Printer:
CR-8
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
10Post-Printing
How I Designed This
123D Design
-
Rounding Hill for Elementary School Students 3D Print Model
Summary
This is a tool to help students achieve a concrete understanding on how to round numbers.
Print Settings
Printer Brand:
FlashForge
Printer:
Finder
Rafts:
Yes
Supports:
Doesn’t Matter
Resolution:
Default
Infill:
Default
Notes:
I used a raft to help with the curling issues that I had been having.Standards
CCSS
Overview and Background
Overview
Students will learn how to round a number.
Lesson Plan and Activity
Lesson Plan
Teacher will show students how to round a number, such as 12 on chart paper. Students will copy the anchor chart in their Student Journals.
Step 1:
Teacher will show students to find their number and underline it. If rounding to the tens place, that would be the 1.
Step 2:
Teacher will show students to “look next door” to the right, which will show the underlined number what to either round up or round down. The number in the example is 2.
Step 3:
Teacher will show students that if the number on the right is 4 or less to “let it rest” and keep the underlined number the same.
Step 4:
Teacher will show students that if the number is 5 or greater, to add 1 more to the underlined number.
Step 5:
Teacher will make sure students understand that all numbers after the underlined number will become a Zero, and that numbers before the underline will not change.
Students will take a look at the “Rounding Hill”, which will show the concrete example of rounding. Students will imagine a toy car stopping on the numbers. If the car stops on or before the 4, the toy car will be pulled by gravity back down to the 0, and will let the underlined number rest. If the toy car stops on or after the 5, gravity will pull the car down to the right side, signifying that they will add 1 more to the underlined number.Anchor Chart
Materials Needed
Materials Needed
Student Journals, Pencils, Chart Paper, Markers, Rounding Manipulatives.
Skills Learned
Rounding
Number Sense
Math
Duration of Lesson
15-30 Minutes
Preparation
Preparation
Gather materials, print out several Rounding Manipulatives. -
Buddha protected by the naga Free 3D Model
Buddha protected by the naga, south-east of Angkor Thom, Cambodia, middle of the 12th century, sandstone. Musee du Cinquantenaire (Brussels, Belgium). Made with ReCap Pro from AutoDesk.
-
Star Wars: Package 1 Free 3D Model
A package with some smaller space objects with inspiration from the old X-Wing games.
-
Caliburn MuzzleVF1 Friction Fit 3D Print Model
Summary
This is a quick modification to Slug’s Caliburn MuzzleVF1 file, which is an extended muzzle break essentially. It is a friction fit onto the aluminum barrel and doesn’t require screws to be attached. I found that the muzzle would be off-axis from the barrel because of the single screw point and I wanted it to work for when I eventually swap out for a longer barrel. -
1515 extrusion cap/foot 3D Print Model
Summary
Protective cap/foot for 1515 extrusion.
Needs a 6mm M3 bolt and nut to secure it in place. -
e3d v6 30mm layer fan 3D Print Model
Summary
30mm layer cooling fan for the E3d v6 hotend.
Designed to fit the monoprice mini but could be used on any printer with the same style mount.
Print Settings
Printer:
m200
Rafts:
No
Supports:
Yes
Resolution:
0.175
Infill:
30+
Notes:
You will need a m3x35mm Alan key head bolt and nut.
only test fitted to this mount.https://www.thingiverse.com/thing:1621387 -
Glass Apple 3D Print Model
Summary
This is a ready to print glass apple designed using SelfCAD software.
To design yours visit https://www.selfcad.com
Print Settings
Printer Brand:
Afinia
Printer:
AFINIA H480
Rafts:
No
Supports:
Doesn’t MatterPost-Printing
Make sure the model is cool before using it
How I Designed ThisStandards
CCSS
Overview and Background
Visit https://www.selfcad.com to sign up for a free account and then launched the editor and you willl be ready to design the model.
Lesson Plan and Activity
Visit https://www.selfcad.com to sign up for a free account and then launched the editor and you willl be ready to design the model
Materials Needed
-Steel
SelfCAD
3D printer
Skills Learned
3d modeling
3d designing
3d design
arts
Duration of Lesson
10 minutes
Preparation
Check this tutorial https://www.instructables.com/id/Glass-Apple-Created-in-SelfCAD/
Rubric and AssessmentReferences
https://www.youtube.com/watch?v=G1pq7EdQzAshttps://www.instructables.com/id/Glass-Apple-Created-in-SelfCAD/https://www.blog.selfcad.com/ -
Clock 3D Model
Additional Info: Clock Rhythm CMJ302ER06 N230118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Armchair 3D Model
Additional Info: Armchair goa N010118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
858D Syringe Holder 3D Print Model
Summary
Here a Syringe Hoder for the 858 HotAir Station
Holds up to three 22cc (19mm Diameter) Syringes
Print Settings
Printer:
Hypercube
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
3 Top/Bottom Layer , 2 Perimeter
Printed with
“Das Filament” PETG
220/60°C @ 50mm/s -
Box corner protect 3D Print Model
Summary
Pour la protection Protection des angles de la caisse de l’imprimante ou autre.
Print Settings
Printer:
Anet
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter -
Coke Bottle Male Connector 3D Print Model
Summary
Plastic bottle male connector for combining various fittings and plugs together.
Download my fitting and combine various parts together to create all types of items.https://www.thingiverse.com/thing:1132995https://www.thingiverse.com/thing:2799255https://www.thingiverse.com/thing:2793776https://www.thingiverse.com/thing:2792632https://www.thingiverse.com/thing:2792719https://www.thingiverse.com/thing:2797468 -
Bottle Stand, Pool Table 3D Print Model
Summary
Bottle stand, Light pole stand, Floating pool table support.
Options are endless, your imagination is your stumbling block 🙂
Fill the bottles with water and color with food coloring.
Shine a light into the lower centre hole and light up the others……
Connect a garden hose to the centre connection…..
Download some of my other connections to make various combinations of ……https://www.thingiverse.com/thing:1132995https://www.thingiverse.com/thing:2799255https://www.thingiverse.com/thing:2793776https://www.thingiverse.com/thing:2792632https://www.thingiverse.com/thing:2792719https://www.thingiverse.com/thing:2797468 -
MoozHoldDowns 3D Print Model
Summary
HUGE Print!
Worth it though.
These are hold downs that will allow you to attach the carving bed without removing the print bed.
I had to print them 1 at a time. I had a problem with the print lifting at the back left corner. The smaller object is the one for the back left corner where the heater attaches to the bed.
If someone sees a better please let me know.
Cheers! and 73’sOverview and Background
This is for fellow Educator Moozers
These hold downs will make it easier for you to use the carving attachment, with less risk of breaking the standard bed.
Lesson Plan and Activity
Useful Engineering
Have students discuss how they would attach the carving bed without removing the print bed.
When they have come close to useful design, present these hold downs and have them modify them to fit their styles.
Use Tinkercad if needed. -
Nice Flower Free 3D Model
Nice Flower
if your bandwidth don’t permit then get it from
https://blenderartists.org/forum/showthread.php?444951-Kindly-check-these-things-before-the-release-of-2-8-(blend-ffile-inside) -
Lumber Jack-Knife 3D Print Model
Summary
This started out as an “Artistic” 3D model, but I thought I would try and make it printable and functional as such.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
N/A
Notes:
Use the orientations shown.
Post-Printing
Assembly:
Print 4 Cogs, 2 Guides, 2 Braces, 4 20mm Pins, 2 12mm pins, and 1 of everything else.
Refer to the exploded view here: https://youtu.be/mUq02HKfeVU
The chain is in two print-in-place pieces, gently break each link free if needed and work them until they move freely. Assemble the two different lengths by clipping them together with the hooks facing out.
Assemble the front of the blade using a piece of 1.75mm filament as a pin between the guide parts. Press 12mm pins in both sides, make sure they are aligned properly and firmly snap them together.
Slip the cover piece onto the blade (it has a subtle top and bottom) and mount the blade into the top case with two 20mm pins.
Position the bottom case and snap on the cover and handle. Affix the handle with another pair of 20mm pins.
The pins can be a bit finicky, you can use M4 hardware instead.
About:
I was playing around with the Fusion 360 renderer and ended up with the image below. I thought I would see if I could make a printable version. Note the teeth are not on the chain in the included STL files, still having some issues getting them to work out right. -
Mini Master Spool 3D Print Model
Summary
WARNING, Thing is being test printed right now, thus no files. Print at your own risk, I will update this posting if the half’s work properly.
I have an MP select Mini V2, the build volume on these guys is pretty tiny. 120,120,120 (mm) So I wanted a spool that I could print on that printer.
Enter Mini Master Spool, modeled after RichRap’s awesome Master Spool design. This one does not have all the bells and whistles of his as of yet. I will update the spool to provide such features.
This spool may work for sample filaments or just bits of filament you have laying around. its a little smaller than the 250gram .5kilo spools, i cant remember what one this is. the Bottom printed portion is sitting on a injected mini spool for reference.
Print Settings
Printer:
MP Select Mini V2
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.30625
Infill:
20% -
Cooling Tower Desert Terrain 3D Print Model
Summary
This is a cooling tower for on top of Desert Terrain Buildings (40k, 28mm scale)
If you look up desert style buildings, many of them have an old but effective way to cool the buildings. They have these towers on top that let all the hot air rise and bleed out leaving cool air in the building.
This is shown with a bunker design I made, but it can go on top of any building or just on top of a mound. -
Dyson attachment 3D Print Model
Summary
This is a attachment that should fit and click in any DC model from Dyson -
Slot machine 3D Model
Additional Info: Slot machine Harley Davidson N230118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Palette+ sensor holder for Wanhao Duplicator 6 3D Print Model
Summary
Holder for the Palette+ filament sensor. Can be screwed on to the backside of the D6 printer. Use the longer screw that came with your printer.
Print both parts an glue them together. I used CA for this job.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
45%
Notes:
Used PLA for printing. -
JGAurora A3S Nozzle Cooling Fan 3D Print Model
Summary
Stock Nozzle fan for the JGAurora A3S printer. -
Ruger 10/22 10rd magazine coupler 3D Print Model
Summary
Simple jig which centers the magazines. Use hot glue to weld them together for a non-permanent tack. really for the US states which limit no more than 10 rounds. -
1/4 inch air hose clip 3D Print Model
Summary
holds air hose to reel, use pop rivits in the holes to attach -
plarail for 999. 3D Print Model
Summary
plarail for galaxy express 999.
[Japanese]
銀河鉄道９９９のレールの端っこの部分を再現するためのレールです。 -
GREP nanomachine Free 3D Model
This was designed by me for a rpg setting called GREP, which was written for the EABA RPG system. GREP is a RPG setting featuring alien nanotech arriving on earth and diffusing thru the ecosystem, and eventually becoming usable by humans. This was meant to represent a nanoscale assembler/disassembler built by GREP to fulfill an order.
-
Realistic Stream Animation Scene Free 3D Model
Realistic Stream Animation was a project I performed recently for my Youtube channel and also to test fluid in Blender..Test came out good and the result is this blend…Feel free to download and use it in any way you like…”Free knowledge and sharing for all” is the motto I believe….Keep Blending…Cheers..!!
-
Delta 4 Heavy 3D Print Model
Summary
This is a model of the Delta 4 Heavy that I made. Stands almost a foot tall. The model will stand on its own once put together, but I also made a simulated launch pad with mounts to help keep it steady. The second stage easily slides out and is really only held in place by gravity.
I did a little spray paint job on the model just for kicks!
The model does require a little bit of supports. Print vertically, which ever end does not matter. I printed mine with engines and nose cone up.I printed mine using
0.2mm layer height
20% infill
But I think this model will do just fine with a thicker layer height or less infill
The mounts on the launch pad are a bit fragile and break easily, so be careful once printed.
Assembly instructions –
1) Print 3 engine sections, 2 booster tops, 1 core top, 1 second stage, and 4 longerons.
2) The engines should fit snug to the core and booster tops. I did not have to use any glue
3) Lay the boosters and core together on a flat surface. GLUE or WELD the longerons to the model. They do not clip on, so additional adhesive is required.
4) As mentioned above, the model should stand on its own from here (including the 2nd stage). But you can print off the launch pad for added stability
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn’t Matter
Supports:
Yes -
Fortnite Bolt-Sniper 3D Print Model
Summary
Basic sniper from fortnite. -
Turny Handle Thing 3D Print Model
Summary
I honestly have no idea what this should be called. I know it’s been done before and I know it’s nothing new. I just wanted to finally make one….whatever it is. Plus it’s pretty satisfying once you make it a put it together and turn it. Works great with PETG or a somewhat flexible filament because it all snaps in place. Also you need to print two sliders, not one. Make sure to put the sliders in their tracks BEFORE you attach the handle to the sliders, otherwise you won’t be able to put it together. It’s not perfect and it’s not beautiful but it’s cool and I like it. So if you like it, then go and print it too I guess.
Print Settings
Supports:
No -
Spike Lugnut Semi Wheel 3D Print Model
Summary
Spike Semi Wheel filament spool cover. I have not printed this item yet, waiting on some silver filament.
Dimensions:
Diameter Total= 7″
Spool insert= 2.35 OD -
H7 LED bulb adapter 3D Print Model
Summary
A simple adapter to get aftermarket H7 LED bulbs to actually lock into their sockets.
Print at 100% infill.
You’ll probably have to whittle the little wings down a bit – this is intentional to ensure a snug fit. -
Sofa 3D Model
Additional Info: Sofa Valetta Pushe N050118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
spool holder 3D Print Model
Summary
.
Print Settings
Printer:
anet a 8
Supports:
Yes
Resolution:
0.15
Infill:
30%Post-Printing
bearing 22mm out 8mm in -
CAD functions explaining 3D Print Model
Summary
This model easly explains the basic functions that can be used in inventor 2018, basicly any CAD software (name functions may be different). this can be very useful for someone who wants to start learning with CAD software.
Print Settings
Printer:
Anet A8
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2 or lower
Infill:
10
Notes:
if ur having trouble with the “revolve” part, then print it with support -
Sunglasses Car Sun Visor Clip – Remix 3D Print Model
Summary
Added a “butée” (french word) to avoid sun glasses fall. -
peltor 3m dab+ headphones wall mount 3D Print Model
Summary
Designed for hearing protection 3m, peltor dab or fm. printed with prusa pla.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Supports:
Yes
Infill:
20% -
Base for ZeTime Elite on standard charger 3D Print Model
Summary
If you have a ZeTime Elite with Metalband, you will notice that the charger doesn’t touch the watch if you put it between the watch and the band. With this base under the charger this problem is solved. -
Tree trunk in forest Free 3D Model
This is a close up of a tree trunk with grass and clover particle systems each separate. You may find at certain angles particles come through tree roots but if I cut them then particle systems need to be “free Edit” set in particle system. So I have left them so you can control amount. All texures are included and ao has been applied to final composite.
-
Sun Rising Animation Free 3D Model
Sun Rise Animation. This is not acually my file. I have recovered my 10 years old Hard Disk
in that I found this. I have modified the file a little.
See the Animation. -
Adventure Time Character-Semi-(WIP) Free 3D Model
Hello, I’m back with another model I’ve been working on lately. This is Semi, an Adventure Time fanmade OC (my own original work). He’s fully rigged, and ready to be posed if you’d like to play around with the rig. I will be updating this upload soon with his textures added, but I’ve not yet gotten started, so for now, you can just play with his rig, and whatnot.
-
12″ and 7″ Vinyl Records Free 3D Model
A 12″ 33-RPM record and a 7″ 45-RPM record. The Cycles materials utilize the Principled BSDF for PBR. The record grooves are very closely approximated to real-world scale, and are created procedurally by patterns of varying roughness. Album artwork can be easily replaced with your own. (See the .blend for placeholder image credits.) If you create a scene with these I encourage you to link to it in the comments – would love to see what you guys do. C’mon my selector!
-
Dumpster pack Free 3D Model
Dumpster pack contain 3 models of garbage containers (25m3, 15m3 and 8m3).
-
1958 Plymouth Free 3D Model
This is my first public build. I think I went through everything as needed. If there are any issues please let me know. I built this, due to only finding one on the internet for around $150 and maybe two others that seemed kind of cheesy. The model is rigged with RigaCar, and should be ready to roll in your animations.
-
AK12 Lowpoly Free 3D Model
-Game Engine Ready
-No textures
-Lowpoly
-Kimm and Grain (or how its called…)
-One Object (And Magazine)
Verts:3,423
Faces:2,611
In Blender Render is a bug with the Wepon.
In the Game Engine it looks normal. -
Knife/dagger Free 3D Model
The blend features a knife with a blade somewhat based on the dagger from Styx: Shards of Darkness, but it contains a custom jaw bone handle and wrapping. Fairly low poly.
-
Hight quality skull – GLSL Version Free 3D Model
Academic thesis in Dentistry at University of L’Aquila; Abruzzo; Italy “Study and implementation of a decomposable virtual skull in 54 anatomically correct elements” By Dr Mariano Coretti
-
The Flash Free 3D Model
Run Barry Run! or Wally. Enjoy the new model from the dc animation television show “Justice League” It’s all made in blender.
-
5×5 Convolve for Cycles Nodes Materials Free 3D Model
This is a 5×5 convolution matrix with a few kernels provided: Sharpen, Box Blur, Gaussian Blur, Edge Detect, and Emboss, intended to be easily to plug into existing materials in order to convolve images as necessary. Provide a step, a UV input, and edit the UV to Color Lookup group (currently just an image). Edit kernels as necessary or use one of the five provided.
-
Ol Tri-Shoe 3D Print Model
Summary
With the power supply mounted to the back of my delta, the weight was too much for a single golf ball. I redesigned the original to hold 3 golf balls to better distribute the weight.
Print Settings
Printer:
Anycubic Delta
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
50% -
Video Timelaps Track And motorized Carrige 3D Print Model
Summary
This was a fun project to do and im going to share it with you. its a track that fits the cossel delta style printers that have the 240 mm diameter hot bed. you could fit some feet to it and use it free standing too.
If anyone is interested in free standing stand for it let me know i will do some and add them to the files.
to build this project you will need the following items :
1 x Stepper motor BYJ48
3 x Ball Bearings 11 mm OD 5 mm ID
1 x Arduino Nano
1 x micro switch
1 x 10K potentiometer
all easily available online
I will be posting a series of videos on youtube showing how to make this and get it working including the arduino code to program it too.
link to videos https://youtu.be/3NT6WOhc9j0
so please support me by subscribing to my youtube channel and if you turn on the notifications you will know when im adding videos for this project.
any problems please leave your comments below. -
Servo Mount for Foam Wing 3D Print Model
Summary
A servo mount that installs in a 6mm thick sheet foam wing. For standard size servos (40 x 20 mm).
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
100% -
Luster 3D Model
Additional Info: Luster massive monty childrens N230118 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
