Summary
Improvements: lays flat on print surface. No suports required.
Print Settings
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0,15 -0,2 mm
Infill:
20%
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Axii Alien Mount 3D Print Model
-
door stop 3D Print Model
Summary
Make sure you make it bigger, it was printed on Orion printer. -
Smart Car Cookie Cutter 3D Print Model
Summary
I recently purchased a Smart Fortwo Pure, and the wife asked if I could make Smart Car Cookies.
Sure ….
As always I am including my basic Sugar Cookie Dough recipe.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
50%
Notes:
You may use any infill you choose, I just always tend to use 50% for all of my cookie cutters. -
AirBlade Intrepid Frame Protector 3D Print Model
Summary
Some frame protector pads I made so that i don’t wreck the corners of the frame on concrete, gates, etc.
Printed in NinjaFlex at 100% infill and 30mm/sec.
Print Settings
Printer:
Monoprice Maker Select v2
Rafts:
No
Supports:
No
Infill:
100
Notes:
Rotate part so its flat and print at 100% infill -
Legion Unit Bins 3D Print Model
Summary
This bin is designed for Star Wars Legion miniatures game.
They are made to stack using magnets (I use 3/16 diameter by 1/32). They also will require units to have magnets adhered to the inside of their bases.
Cards and activation token have their own slots so you can have everything you need in one block. I have it sized so that normal FFG sleeved cards can fit nicely in each slot.
The AT-RT bin also has a small space for extra weapons. I’ve just glued a bit of metal in mine for my magnetized weapons to cling to.
The dimensions are such that you can fit two stacks of four next to each other and fit inside the Legion core box. This leaves room at the side for rulers and dice.
Ready:
Troopers
AT-RT
In Progress:
Commanders (Working on bins for 2x or 4x commanders, including all command cards.)
Speeder Bikes
A lid!
Ruler tray
Dice box (unsure if I’ll give same dimensions as unit bins or fit on edge of box.) -
TackleTube 3D Print Model
Summary
This thing is a compact fishing tackle holder good for backpacking and backwoods camping. At a minimum you need the tube the outer and either one cup or two half height cups. Spare fishing line can be wound in the empty space around the outside of the tube and there are slots for 2 pre-assembled hook and leaders. Happy fishing!
Print Settings
Printer:
Custom delta
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
Any
Infill:
AnyHow I Designed This
In FreeCAD. -
Implement Holder 3D Print Model
Summary
Wanted a funky lookin holder for my tweezers and spudgers for my work bench. Started playin around in TinkerCad and designed this.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
10%
Notes:
I printed mine in glow in dark PLA. Will post glowing picture later. -
T-Nut Nutenstein Nut 6 M3 2020 aluminiumprofile 3D Print Model
Summary
I designed these nuts to save money. You can use an M3 nut. The nuts are printed very fast and serve their purpose.
Have fun printing.
Print Settings
Printer:
Anet A8
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
100%Post-Printing
-
Fiamma Carry Bike End Stop 3D Print Model
Summary
End Stop for the Fiamma Carry Bike Camping/Caravan Bike Stand (older Version) -
Low poly person 3D Print Model
Summary
low poly person that is created for school, feel free to do anything that you want with it! -
Flower hanger 3D Print Model
Summary
A ring to hang a flowerpot or something similar.
Inner diameter: 143mm
.par => Solid Edge ST8
Print Settings
Printer:
Anet A6
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0,2
Infill:
20% -
Bust of Angelique d’Hannetaire Free 3D Model
Bust of Angelique d’Hannetaire (1749-1822), made by Gilles-Lambert Godecharle (1750-1835). The Royal Museum of Fine Arts of Belgium (Brussels, Belgium). Made with Capturing Reality.
-
Game Tile with Letter 3D Print Model
Summary
This is intended to make custom/replacement tiles for games like Bananagrams.
If you want a full set of the game you should buy it, to avoid piracy.
You can adjust the letter and lettersize variables to make your desired tiles, or all of them if a different sized tile is desired.
I painted the groves to increase contrast. -
Throwing Ring 3D Print Model
Summary
You can scale it to any size you wish, it works well with abs and other more flexible plastics. It should glide very well and straight much better then a Frisbee.
Quick tip when printing with abs try using white wood glue for outdoor use on the glass bed, an awesome bed adhesion in my opinion. Sticks well when hot and the part pops off when cool and its is a durable surface too so it lasts long.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.6-1 mm layer height
Infill:
100% -
12V socket insert / cover /lid 3D Print Model
Summary
Needed a cover for a 12V power / cigarette lighter socket in order to prevent dirt/dust or moisture getting into it. (Mounted on my tractor)
Print Settings
Printer:
Prusa -3 clone
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Notes:
Tried printing it without support first, but came out rather messy. Hence recommend using support for this one. -
Generic Hobby Screew Driver Cap 3D Print Model
Summary
Best way to cap your tool, no more missed caps or hard to find bit you need, just print in different color and that it!
Printed in flexible filament. -
ISDT SC-608 charger cover 3D Print Model
Summary
I designed this little cover for my ISDT SC-608 smart charger to protect the screen while it is in my backpack.
Printed from TPU
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
35%
Notes:
Print of TPU. -
Sofa 3D Model
Additional Info: Sofa ostin Pushe N060318 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Mothers Day Fridge Magnet 3D Print Model
Summary
A good Mothers Day gift.
back plate requires 10mm x 2mm magnets. i bought some on Amazon. they work wellhttps://www.amazon.ca/gp/product/B01MTORMMP/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Print Settings
Printer:
dremel 3d40
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15% -
eBike Water bottle 18650 case 3D Print Model
Summary
This is a WORK IN PROGRESS. I still plan to make a full cover, the retainers are just temporary.
One of the pieces for an eBike project I’m making at my shop with things I’ve scavenged. It holds 8x 18650 cells. I run them in 4x banks on each side (2up and 2 down) and bridge together on the top. It puts out just above 15v which is perfect for my motor.
MAKE SURE TO ALIGN THEM MIRRORED on each side, I will not be held responsible if you wire it incorrectly.
I also just used IO shields that I cut down for terminals, proper terminal material would be better, but it works for my testing needs. If you have material that will fit inside of a spade connector, that would be ideal.
The spacing for the water bottle holder screws on my bike is 67mm, if yours is the same, it should mount right up. I made the holes a little small so I could drill it out to have a clean edge to thread into and adjust for screw head size, so keep that in mind. -
doogee s60 bike holder 3D Print Model
Summary
phone holder for doogee s60, mounted on mountain bike.
holds up well.
it starts to snap, you need to file the round thickness a little to adapt it to the best.
it sticks to the handlebar with 2 bands.
the hole at the top left is for a rubber band but not needed -
The Motion Picture Tricorder 3D Print Model
Summary
Here is my motion picture tricorder, made for my friend Ryan 🙂
Some of the stl files are cut in half for easier printing. -
Cheap multimeter support stand 3D Print Model
Summary
This is a stand for these cheap multimeters. I know, I should buy one more expensive.
Designed in Freecad, sources included.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
150
Infill:
20%
Notes:
You can insert a rubber band while it is printing the inclined sides, and when print finishes it will stay in place (see photos) -
Multicolor Gravity Falls Bill Cipher 3D Print Model
Summary
I decided to remix @Jason_Blake ‘s Gravity Falls Bill Cipher to get better resolution on the hands (for my printer and object print size) as well as be able to use different colors at various layer heights. I removed the outer ring of text as well.
I used TinkerCAD to remix the original design and then used the Variable Settings Wizard Tool in Simplify3D to split the layers where I wanted to change the filament colors.
My settings in Simplify3D were:
Change Scaling (uniform scaling)
X 100 mm (174.95%)
Y 100 mm (174.95%)
Z 5.24 (174.95%)
Various Layers
First layer, blue, stop at 1.30mm height
Second layer, yellow, start at 1.30mm, stop at 3.00mm
Third layer, black, start at 3.00, stop at 4.40mm
Fourth layer, yellow, start at 4.40mm
Print Settings
Printer:
Monoprice Maker Select
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Notes:
Changed filament colors at various layers -
SLAMTech RPLidar 360 (A1) Case 3D Print Model
Summary
A case for SLAMTech’s RPLidar 360 (A1) that protects the lidar and has room for a raspberry pi zero w. Surprisingly the pi zero w has enough horsepower to process up to 10hz from the lidar while also running hector_slam, telemetry, and a geotiff node. Basically with this case and a pi zero w you can have a self-contained lidar navigation system.
For up to date scad and stl files as well as other designs I’ve made, you can head over to my github repo.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
10% -
Iris Keyboard Case 3D Print Model
Summary
Iris keyboard case. Print as they are oriented, with supports.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
25%
Notes:
Supports required for the outer shells and they should be printed top-side down. I have them oriented how they should be printed. I printed with 3 shells all the way around. -
FT-5 Adjustable Glass Holder – remix (heat insets) 3D Print Model
Summary
Remix of the FolgerTech FT-5 Adjustable Glass Holder (https://www.thingiverse.com/thing:2260982) I didn’t have enough of the 3mm square nuts to make the other version, but I do have heat insets that work quite nicely. This version is essentially the same as the original, but a little taller, and configured for heat set inserts instead.
Best printed in ABS or some other heat-resistant material.
The inserts I used and designed for are on Amazon here:https://www.amazon.com/gp/product/B077CL322T
Print Settings
Printer:
FolgerTech FT-5 R2
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
30% -
Armchair 3D Model
Additional Info: Armchair laiol-high Pushe N050318 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Jumbo Glue Stick Holder for Ultimate Modular Tool Holder Rack 3D Print Model
Summary
This is a remix of the glue stick holder from the Ultimate Modular 3D Printer Tool Holder Rack by Lay3rWorks. This part will hold a larger size glue stick up to about 28mm.
The two pieces fit together very snug, I have been using mine without any glue so far but will probably glue it together eventually. I found the easiest way to get the two parts together is to put the two open ends in place and then press up slightly on the rounded backside to get it into place.
I’ve posted the 123DX file as well as the STL so feel free to modify it as needed. This is the first thing I’ve ever remixed and posted so let me know if it needs more work.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30 -
Gaslands: Guertin Industries JP3000 Quad Rotor Gyrocopter 3D Print Model
Summary
From Guertin Industries the company that brought you the JP1000 Combat Motorcycle, and the JP2000 Wastland Trike comes their Latest line in Wasteland Warfare. The JP3000 Quad Rotor Gyrocopter. This single seat airborne platform will allow you to deal “Death From Above!” in all ways possible. With 2 mount points for weapons and dropable munitions your enemies will never know what hit them. Hover and stealth mode will ensure they will never see it coming.
For all you Gaslanders looking for a gyro or gyro sized airborne platform look no further. The Gyro has no build slots but with its Perk of “Bombs Away” it can count any dropped weapon as requiring 0 build slots. That means Smoke, Molotov’s, Grenades, Mines, Glue, Oil, and Caltrops will all be valid options for your upcoming Carnage. Cuttently mounted options at the weapons points include the RPG and the air intake scoop. Optional Smaller Front wheel and Straigt forked Body along with positionable Rotor Naceeles allow for a customizable Model to suit your needs. Wheels were remixed from https://www.thingiverse.com/thing:1339104 a design by Scudjuice. The main page for Gaslands group is https://www.facebook.com/groups/gaslands/ or www.gaslands.com
Depending on your game, it may be scaled up and used as a Helicopter.
Go Control the Skies of your battlefield.
If you like my designs and would like to buy me a coffee. You can click here. https://www.ko-fi.com/W7W3AYQN
Print Settings
Printer:
Anet A8
Rafts:
Yes
Supports:
Yes
Resolution:
.1
Infill:
100% -
CRRL Logo Keychain 3D Print Model
Summary
Central Rappahannock Regional Library
Serving Fredericksburg, Stafford, Spotsylvania, and Westmoreland
librarypoint.org -
Lamp Reflector 3D Print Model
Summary
Reflect strong led lamp to soft light with wide coverage.
Please connect the parts a & b with a M3 screw; c & d with another longer M3 screw.
and then connect ab & cd with an Aluminum tube or any material tube. -
Conduit Crane Machine NEMA17 Axis Mount 3D Print Model
Summary
Using this for a conduit crane machine.
Will post rest of machine as it is built. -
Pin-Tumbler Lock from MechanicalGIFs.com 3D Print Model
Summary
This is an acrylic model of a pin-tumbler lock, the most common kind of key lock, made from laser-cut acrylic. It should be possible to make using an ordinary desktop laser cutter able to cut 1/8″ (3mm) acrylic. Photos and videos can be seen at http://mechanicalgifs.comOverview and Background
Instructions
This is a laser-cutter project, which will require a supply of acrylic sheet and a laser cutter able to cut at least 1/8″ (3mm) acrylic. The model can be made entirely of plain clear acrylic, or the pins, key, or other parts can optionally be made of colored acrylic.
The file PinTumblerLock.dxf contains all the cutting and engraving patterns in separate layers. Lines in yellow are meant to be engraved, all other colors of line should be cut. Use the speed and power settings appropriate for your laser cutter: every one is different.
There are three layers in the DXF file:
A1 should be cut in 1/16″ (1.6mm) acrylic
A3 should be cut in 1/8″ (3mm) acrylic
G should be cut in 0.020 PETG or similar film.
The thicknesses can be changed if you like, just adjust the length of the screws that hold the model together to match the total thickness of the material you choose to use. The key and barrel part must add up the nearly the same thickness as the body of the lock (e.g. 1/16 + 1/16 = 1/8 as specified). The PETG film can be anything you like that is about 0.5mm thick. Its purpose is to provide a bit of space so the moving parts can slide freely. Only the A1 layer must be clear: all the other parts could be opaque if you like. (The model is particularly attractive if you make the upper and lower pins out of differently-colored plastic.)
A detailed assembly video showing exactly how to put the model together is available at https://mechanicalgifs.com/instructions
Lesson Plan and Activity
Lock Lesson
Locks are by their nature secret, but this one lets you see inside to understand exactly how the key serves to communicate a secret code to the pins of the lock, allowing it to open.
Materials Needed
Materials needed
(1) Approximately 8″ x 8″ (200mm x 200mm) piece of 1/16″ (1.6mm) clear acrylic.
(1) Approximately 4″ x 4″ (100mm x 100mm) piece of 1/8″ (3mm) clear acrylic.
(1) Approximately 4″ x 4″ (100mm x 100mm) piece of 0.020 PETG or similar film material. (Exact thickness is not important, it is used as a spacer to allow the moving parts to slide freely.)
(2) Optionally, approximately 1″ x 2″ (25mm x 50mm) pieces of 1/8″ (3mm) colored translucent or opaque acrylic.
(5) 1/8″ (3mm) x 1″ (25mm) very light spring.
(6) #2 x 5/16″ round-head machine screw (or metric M2 x 8)
(6) #2 hex nuts (M2) -
Mini Toy Tank Track 3D Print Model
Summary
So my 3yo son asked me to fix his toy tank tire track.
I didn’t have any TPU on hand but decided to test it out with PLA first before my TPU filament comes.
I printed a different design at first but realised it can’t work as the tracks cannot be properly drawn around the sides so this circle design is a better one. TPU is flexible so we should be able to bend it around the longish shape of the tank tracks!
How I Designed This
Fushion 360
I used Fushion 360.
Initially I thought of drawing like an rectangles with two semi-circles at the two ends but realised that it cannot be printed properly. Then I realised that using TPU, a circle will be a better shape since it is flexible.
So I drew a circle, extruded it into a “rubber band”.
Then created a plane on the tangent and dew one of the tyre outline, extruded it, then created a pattern around the extruded circle. -
Basic Multi-Watch Stand 3D Print Model
Summary
I took the Watch Stand by McL30D and reworked it a little. I removed the branding from the base and rebuild the top part removing the branding and taking the ridges off the ends for a simple basic look.
I’m still tweaking the design, but I plan to do a test print very shortly. Then I’m going to need to buy more fancy watches to fill it up. -
Curtain 3D Model
Additional Info: Curtain N210218 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Sofa 3D Model
Additional Info: Sofa roise Pushe N060318 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Makedo Comfort Grip Screwdriver 3D Print Model
Summary
Made out of two materials, this is a replacement screwdriver for Makedo. As the drivers in The Studio (our school maker space) are slowly breaking, it was time to get creative. The flexible handle makes it a bit easier to grip in little hands.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
Yes
Supports:
No
Resolution:
.25 and .325
Infill:
20% and 35% Tetrahedral
Notes:
Body – Printed in PLA at .25 (will try out PETG in the future) on a raft to increase adhesion. I printed with the socket as the top but do what you feel is best, of course.
Handle – Printed using Ninjaflex at .325. Chose to use tetrahedral infill to increase strength in both directions.
Use you favourite glue to stick ’em together. -
Sculptris Dummies: Dwarves 3D Print Model
Summary
These OBJ models were designed for use in Sculptris to give you a head-start creating dwarf characters. If you import them into Sculptris, their parts should remain separate and you can immediately begin sculpting and posing them any way you like.
also-
KICKSTARTER ALERT!
We’re currently running a Kickstarter campaign for our Townsfolke fantasy civilian miniatures, so swing by and drop us a pledge if you want the full range. For those of you supporting us (or thinking about supporting us) on Patreon, all the rewards will go to our backers there as well (as we do with all our crowdfunding campaigns).
This is something for which we’ve received a lot of requests over the years, so we’re excited to finally be getting around to it. All of the models print without the need of supports and are FDM optimized (though they’ll work just fine on a resin machine too). We’re launching with 16 available miniatures, with 12 more ready to be unlocked as stretch goals (and more to come).
Enjoy! -
Exhaust pipe Tubo dritto 39-h90 – 1 1/2 thread connection 3D Print Model
Summary
If you do not want to buy the whole pipe kit, and you need one straight, this is for you.
Exhaust pipe Tubo dritto 39-h90 – 1 1/2 thread connection
Nut 1 1/2: https://www.thingiverse.com/thing:2855169
Adapter Syphon – 1 1/4″ to 1 1/2″: https://www.thingiverse.com/thing:2855144Print Settings
Printer Brand:
Zortrax
Printer:
Zortrax M200
Rafts:
Yes
Supports:
No
Resolution:
0.19-0,29
Infill:
90%
Notes:
Tolerances designed for ABS printing -
Fire Emblem Echoes Alm’s Falchion FIXED 3D Print Model
Summary
The original model was made cjimenezber but i had a problem with fitting the hilt on my 3d printer. I use the dremel 3d40 3d printer for all my prints, I split the hilt model so that it would fit on my printer’s print bed.
link to origional:https://www.thingiverse.com/thing:2631803
Also i really like fire emblem -
Conical exhaust pipe 44-31-h135 – 1 1/2 thread 3D Print Model
Summary
Final sink drain, diameter 44xL40mm + conical L45mm + diameter 31xL50.
1 1/2 thread
Suitable for particular piping situations.
Nut 1 1/2: https://www.thingiverse.com/thing:2855169Print Settings
Printer Brand:
Zortrax
Printer:
Zortrax M200
Rafts:
Yes
Supports:
No
Resolution:
0.19-0,29
Infill:
90%
Notes:
Tolerances designed for ABS printing -
Replacement Cover for Anchor-Hocking 2qt Pitcher 3D Print Model
Summary
The pitcher: a 2 quart container with circular 670mm filler opening. Purchased at Target; Made by Anchor-Hocking.
The original cover/lid got destroyed in the dishwasher, so I created a replacement for it.
I used Inland PLA from Micro Center.
No Photos available as of this entry.
Print Settings
Printer Brand:
PowerSpec
Printer:
Duplicator I3 PLUS
Rafts:
No
Supports:
No
Resolution:
0.08mm Layer, 0.8 Shell
Infill:
100%, 4% Overlap, Solid Top & Bottom
Notes:
All pieces oriented for no support, uses built-in skirt of 8laps.
Post-Printing
Construction
Pieces require only minimal cleaning.
Adhesive used: Gorilla Brush&Nozzle Super Glue.
Adhere 2 blocks to main lid body; let set.
Adhere large hinge block to spout cover; let set.
Using section of 1.75mm PLA filament for hinge, slide ‘hinge pin’ through openings, then glue at outer ends to lock in place.
How I Designed This
Designed in Blender.
All parts have been ‘cleaned’ and ‘prepped’ using the Blender Add-on “3D Printing”. -
Case for 10000mAh Xiaomi Powerbank Pro QC3.0 3D Print Model
Summary
only use for 10000mAh Xiaomi Powerbank Pro QC3.0
Print Settings
Printer:
Micromake D1
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20% -
Injustice 2 – Predator Batman Logo 3D Print Model
Summary
Referenced from Injustice 2 Predator Batman’s costume, I modelled this logo.
This could be sharp and dangerous, and not suitable for kids. I prefer it as a wall/door decoration. -
469A001G01 – Hot Plate and stir bar system 3D Print Model
Summary
Designed around an ardiuno Uno and a random motor I found. Takes a standard 200×200 mm heated PCB and insulates it from the stir bar assembly. Code in progress to drive all of it, but wanted to get the solid models available in the interim. -
Pillow 3D Model
Additional Info: Pillow 6 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Armchair 3D Model
Additional Info: Armchair monbrison N050318 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Clearview Neck mount 3D Print Model
Summary
This is a neck mount for Clearview.
There is a hole for the strap and a battery mount of 3 S – 2200 mAh.
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
Material:PETG -
Threaded star knob 3D Print Model
Summary
Simple remix of this knob to configure how I want it and to add an internal M12 thread in place of the nut catch.
This is designed to be used with my dog hole hold down thing here –
https://www.thingiverse.com/thing:2857409
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%-35%
Notes:
Should be plenty strong enough but add more shells rather than more infill if not. -
Humming Bird 3D Print Model
Summary
I was looking for a simple 3D humming bird design to print – didn’t find one (there were designs out there but they wanted anywhere between $5.00 and $50.00 to download the file). So, I designed one myself – t’s not the most detailed design, but, looks great once it is painted…most importantly, its Free!
Print Settings
Printer:
Sainsmart (ANET A8 Clone)
Rafts:
No
Supports:
No
Resolution:
Various
Notes:
Used various setting – one key take away…slower is better
Also – I’m not a big fan of support structures, so I split the object and printed the two halves separately, and, glued them together.
How I Designed This
Design
I designed this using ‘Paint 3d’ and rendered it usung 3D Builder (both programs came with Windows 10) -
Symbol of scarlet mazoku 3D Print Model
Summary
Recently looked such anime as Konosuba. Then decided to see if there’s something from this anime in Thingiverse. As a result, I was very disappointed by the lack of any work on Konosuba and decided to fix this problem -
Dustpan 3D Print Model
Summary
I needed something to clean up under my ultimaker 3’s plate after printing, so i created this on tinkercad very easily.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.2
Infill:
solidOverview and Background
Mini Dustpan for cleaning up around your printer
Basic Mini Dustpan for cleaning up your workspace after 3D printing and trimming projects.
Lesson Plan and Activity
Download and go -
E-ZPass Flex Transponder Case 3D Print Model
Summary
This is a simple case for the E-ZPass Flex Transponder. I plan to use this as the base design for other automotive mounts for the transponder, e.g. visor clip mount, rearview mirror mount, etc… For people who don’t want to actually stick one more item on their windshield.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30% -
The M.A.S.S. Device (GI Joe) 3D Print Model
Summary
The M.A.S.S. Device was the plot focus of the Sunbow GI Joe cartoon of 1983. There was a toy released for this but I decided to base this model off of two cartoon images I found online…it looked more impressive. But because of this the model is quite large, roughly 16″ x 10″ and fits in with the rest of the toys in this line. As with the rest of the files I’ve created this model is intended to be printed at 25%. Printing larger or smaller you may have too much or too little detail.
My painted print in the pictures is roughly 4″ x 3.5″ x 4″ tall.
This file is free to download. Please note that it is listed as “non-commercial”. Neither you nor I are allowed to buy or sell physical copies of this 3-D model. You are allowed (and encouraged) to print copies for your own personal use. If you have downloaded this file from a source other than my site on thingiverse.com they have done so without my permission. Thank you for respecting me and the rights of the original copyright holder.
As always, much respect and gratitude to past and present members of our Armed Forces, you are the “Real American Heroes”. Your sacrifice allows people like me to live in peace, freedom and make silly little toys like these.
Tips:
All of these files can be printed without supports. The console_generator is printed with the base down. The beam emitter, element containers (you need 3), and the crystal are all printed pointed up. -
Mosfet Enlosure 3D Print Model
Summary
Got in a Tronxy X5S to X5SA upgrade kit from www.customize3d.biz and it came with a mosfet for the heated bed and while it came with a holder for it I wanted to something a little different. This is designed to bolt to the frame by 2 m4 bolts and T nut I allowed for the screw driver to pass through the side of the box to tight the mounting bolts. I will have a matching enclosure foe the control board once it has been test printed … I have not printed this item yet But I’m sure it will work. the lid should be able to be help on by 2 m3 bolts one from each side. -
Armchair 3D Model
Additional Info: Armchair B&B Italy N011017 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
pen holder / pencil case / knife holder 3D Print Model
Summary
This product is suitable for holding knives and pens and pencils or similar things.
Print Settings
Printer:
ARM
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
20% -
Ballistix Tracer memory FNATIC lightbar 3D Print Model
Summary
Just a custom FNATIC logo to work with the new Ballistix DDR4 Tactical Tracer memory. With this memory you can design your own lightbars to work in conjunction with the RGB lights on the memory, pretty cool!
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Infill:
0% is ideal
Notes:
Obviously need to use translucent material, I would keep walls at 2 layers, no more than that, one looks better but is very fragile obviously. -
Flexi Dog Waste Bag Attachment (no thread remix) 3D Print Model
Summary
As the original cap is hard to screw due to a threaded design I changed that part only so now it closes without much trouble.
Printed at 0.2 resolution for first 60mm and 0.15 for the locking part with the groove. (but should be fine with 0.2 everywhere)
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
Yes
Resolution:
0.2 -
wanhao dial gauge redux 3D Print Model
Summary
I remixed this for my wanhao Di3 as my dial gauge was shorter than the original file so just remixed to lower mount I made I one piece because of im lazy -
Carcassonne Traders and Builders Expansion Tiles 3D Print Model
Summary
Remixed using Solidworks.
These are the extra tiles needed for the Traders and Builders expansion for Carcassonne. (Some of the T&B tiles are identical to those in the base game so they aren’t included in this Thing).
I left out the ribbon/barrel/wheat symbols on the tiles because I think that rule is lame…
If you want to play with that rule, I’d recommend adding simple shapes to the tiles in Tinkercad to represent the symbols.
Print Settings
Notes:
I printed at 85%, this way the game doesn’t spill over every table we play on 🙂
The OG meeples will work with this size but it’s a little tight, I chose to print smaller meeples that make playing easier.
Post-Printing
Prime with black, paint to preference, matte clear coat gives great finish and protection to these pieces . -
Garbage Disposal Stopper Holder 3D Print Model
Summary
This is a holder I designed to store the black plastic stopper that came with our InSinkErator brand garbage disposal in our kitchen sink. The stopper looks like this: http://a.co/ccNfKJo.
Our is mounted inside one of the cabinet doors just below the sink. It’s within easy reach, but out of the way. We rarely use it, so reason to have it out all the time.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% -
Little castle 3D Print Model
Summary
Super quick castle. Made it when I was younger. It just looks kind of cool. Just for the fun of it I am uploading it. -
Anet A8 LED strip mount under X axis clip on remix 3D Print Model
Summary
This remix was remixed in Tinkercad to remove the screws. Assembly is the same, but instead of using screws, you just snap fit the brackets on. No screws needed!
😀 -
Colonial Viper Mk II (Battlestar Galactica) 3D Print Model
Summary
Another patreon model. Just dumping files since the patreon is shutdown. -
Mountain 3D Print Model
Summary
Its a mountain lol
