Summary
This is a clapping gun. The pins can be any rod of size. The spring needs to fil with ample tension.
The STP file has design data
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Clapping Gun 3D Print Model
-
raptor 3D Print Model
Summary
ian
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Yes
Supports:
Yes -
f35 lightning 3D Print Model
Summary
ian
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter -
8 relay ethernet board 3D Print Model
Summary
Support mural pour la carte de 8 relais ethernet trouvable sur aliexpress
Post-Printing -
Card holders 3D Print Model
Summary
Realización de un sujeta cartas como ayuda técnica dejando las manos libres para personas con problemas de movilidad en las manos.
How I Designed This -
Hooye Metric Tap Case 3D Print Model
Summary
I bought a Hooye metric tap set off of Amazon and it needed a case.
For the three smallest taps, I made the case to fit the handles for small taps here:https://www.thingiverse.com/thing:1701162
Hopefully others will find it useful.
Amazon link for the tap set:https://www.amazon.com/gp/product/B071VKZ2DC/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1 -
Featherlight AXII Mount 3D Print Model
Summary
An AXII mount for your Featherlight!
This mount is designed for the Featherlight, with 5mm OD standoffs spaced 30.5mm apart, but will work on any frame with a similar configuration.
Get your Featherlight here: http://falconmultirotors.com/featherlight5.html
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Infill:
100
Notes:
Print in TPU -
Sofa 3D Model
Additional Info: Sofa sheridance Pushe N060318 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
CR-10 Titan Aero Touch mi 3D Print Model
Summary
Voici une tête d’impression pour creality cr 10 avec titan aero et touch mi
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
20
Notes:
support pour le support ventilateur -
Witch/Wizard 3D Print Model
Summary
This is a model of a halfling witch. It would also work well with a wizard. I designed the original model in DesktopHero3D, and modified it using MeshMixer.
Printing
I’ve had a few prints using an Ultimaker 3 Extended, which were fairly successful, but I’ve recently tried on a FormLabs form 2 and the detail is incredible.
Attributions
backer71 (Muscled Arm Left)
backer71 (Muscled Arm Right)
Xenon472 (Basic hood)
backer71 (Male Head)
DeltaFoxtrotZulu (Platform Hex)
The licenses for the individual assets used are:
Muscled Arm Left (Creative Commons – Attribution)
left hand closed (Creative Commons – Public Domain Dedication)
thick neck (Creative Commons – Public Domain Dedication)
Muscled Arm Right (Creative Commons – Attribution)
Simple Tunic (Creative Commons – Public Domain Dedication)
right hand closed (Creative Commons – Public Domain Dedication)
Basic hood (Creative Commons – Attribution)
Male Short Pants (Creative Commons – Public Domain Dedication)
Male Head (Creative Commons – Attribution)
Male Sandals (Creative Commons – Public Domain Dedication)
gnarled staff (Creative Commons – Public Domain Dedication)
male body (Creative Commons – Public Domain Dedication)
Platform Hex (Creative Commons – Attribution – Share Alike)
cloak cape (Creative Commons – Public Domain Dedication)
cloak cape (Creative Commons – Public Domain Dedication) -
Touchscreen Bracer iPhone 5 Concept for Prosthetic Arm 3D Print Model
Summary
I wanted to make an easy touchscreen holder for kids (and adults) to easily have a phone accessible and thought a bracer/gauntlet would be the way to go.
I am still learning CAD so this is very rough, did I mention very rough concept? lol
How I Designed This
Design Tool
Tinkercad -
Art 1 3D Print Model
Summary
Just another piece of intricate interactive art
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci miniMaker
Rafts:
Yes
Supports:
Yes
Resolution:
100%
Infill:
75%
Notes:
print with exactly 75% nail for best results and use a 0.4mm nozzle -
Active Transport Protein 3D Print Model
Summary
Although not actual size, this active transport model is the perfect tool for teachers to demonstrate to students how molecules are moved against their concentration gradients through a membrane and into a cell. This product represents the process of an active transport protein diffusing molecules from their low concentration to their high concentration.
The whole model consists of two concentration placement holders (one representing the cytoplasm inside the cell and the other representing the extracellular matrix outside the cell), two extensions of the membrane, a protein plate on which the protein halves rotate, two protein halves that are equipped with engravings that can bind to certain molecules, two plugs to secure the protein into place with the plate, an ATP than can break off into an ADP and a single phosphate, and, as well as, several pieces of two different type of molecules. -
Sheet Screen Garter 3D Print Model
Summary
I was looking for some way of stretching a sheet to make a screen for a yard drive-in. Nothing came up so I thought I’d try something.
This hasn’t been tested in the yard yet but seems to hold a towel I tested it with. I’ll likely tweak it once I give it a go.
Created in AutoCAD because that’s what I’m familiar with.
Print Settings
Printer:
DIY HyperCube
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50% -
Electric Saint Helmet Goggle Clip 3D Print Model
Summary
Goggle clip for the Electric Saint helmet. Mine required some filing, but after that it clipped right on. -
SE-14R trigger 3D Print Model
Summary
I tried to build the SE-14r blaster from rogue one as saved in the source material, but i broke the trigger and object titled (lower) by trying to fit them together. So i decided to open up 3D Builder and simply merge the two.
Print Settings
Printer:
Anycubic I3 Mega
Rafts:
Yes
Supports:
Doesn’t Matter
Infill:
25% -
3″ Pool Chlorinatior with Tourist Duck Lid 3D Print Model
Summary
I needed a chlorinator for use with 3″ tablets, but Tixhyl’s version is designed for the smaller (1″?) tablets. I liked the design, though, so… why reinvent the wheel? Simply rescaling the existing model wouldn’t work, though, because that would have changed the size and shape of the holes. So… I loaded Sketchup and redrew the design from scratch, with the adjusted dimensions.
Not being satisfied with that, though, I thought this needed a lid, and nothing looks better floating in the pool than a rubber duck. Unfortunately, I am not too good at organic modeling yet, so I borrowed 3DprinterOS’s totally awesome Tourist Duck. I did the merge for this in Blender, just because blender imports, and works with, existing STLs a lot easier than does Sketchup.
After printing, I painted the colored portions of the duck with Plaid Folk Art Multi-Surface acrylic paints.
Another Sketchup Model – Debunking the Myth that Sketchup is Useless in 3D Printing
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
Yes
Resolution:
0.2 – 0.3
Infill:
5-10%
Notes:
This needs to be able to float, so it is best to print the chlorinator with about 5% infill to make it as light as possible. The lid needs supports enabled and can be printed with between 5-10% infill. I printed every thing at 0.3mm layer height, simply because I wasn’t too concerned about overall appearance, but of course 0.2mm for the lid would look much better. As for supports, I used Cura’s “tree supports” just because they looked like hands holding the duck’s head. Of course, for large flat areas, like the underside of the lid, “tree supports” are not ideal, unless maybe you turn on “support interface” as well. If I did it again, I’d stick with standard support settings.
For the lid, I printed the lower half in white and then switched to yellow as soon as the duck portion started. At the 0.3mm layer height I used, this was at layer 111, but your mileage may vary, so you may want to double check that layer view before deciding where to swap colors. -
Fireplace 3D Model
Additional Info: Fireplace N190418 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
3D Printable Mjolnir (Thor’s Hammer) 3D Print Model
Summary
This is a miniature printable version of the Mjolnir. It is very, very, tiny. -
Hygropeter (ThermoPro TP-50) mount for Filament storage box 3D Print Model
Summary
Mount for one of the most common Thermo- / Hygrometers on Amazon.
Mounting holes mad for M5.
Battery compartment still accessible after mounting.
ThermoPro TP50 on Amazon: https://amzn.to/2s1PSuA
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
2mm
Infill:
20% -
Despacito 3D Print Model
Summary
Yespacito
Hold it up to a light source for a good meme. Haven’t tried printing yet so send a pic if y’all have.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
Any resolution, but smaller layer height will give better detail on the Boi.
Infill:
50%-100%
Notes:
despacito
Post-Printing
despacito
despacito
How I Designed This
despacito
despacitoDespacito
despacito
despacito -
Double Extruder Helmet for OpenRC F1 car 3D Print Model
Summary
This is a modified version of the Helmet for OpenRC F1 car by tahustvedt for two color printing.
Print Settings
Printer:
Flyingbear P905x
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20% -
Amcrest NVR Fan Mount 3D Print Model
Summary
This is a fan mount for an Amcrest NVR unit NV4432E. Amcrest unit ships with only one fan and one bracket. Stock fan is loud. now you can install two quieter fans. Only a 10mm wide fan will fit on the one side. Fans are 60mmx60mmx10mm or 15mm -
Pattern Weight from Washers 3D Print Model
Summary
I had some steel fender washers (inner diameter 0.25″, outer diameter 1.25″) and wanted to use them as weights for sewing patterns, so I whipped up this design in Fusion360 to make a little holder for them. Each holder fits 4 of washers I have. Be warned: It’s a tight fit and you’re unlikely to get your washers back without destroying the print.
I designed this to be printed at 0.2mm layer height and 0.5mm extrusion width.
Print Settings
Printer:
Creality Ender2
Rafts:
No
Supports:
No
Resolution:
0.2mm -
leepard ring with supports 3D Print Model
Summary
It is a ring with supports built already.
We are a factory produce non-casting and casting resins for various DLP LCD SLA 3D printers.
If you need resin material,contact us to get some any time:
[email protected]
wechat:1922988190
skype: +86 15216873412
Print Settings
Printer:
Jamghe DLP printer
Rafts:
No
Supports:
Yes
Notes:
slice 0.05mm,exposure time 2.8s/layer,material: Jamghe casting resin green color.
Post-Printing -
Simple USB Lampcase 3D Print Model
Summary
Designed for:
USBExtention Tube with Usb 2 bulb with M3 screw hole.
You can force the M3 screw into the printed hole( depending on the printer you might want to modify the hole)
Also please excuse the crappy photo quality 😛
Example of LED and USB Tube:
(Disclaimer: I do not receive royalty from these shops, nor am I making recommendation, just examples, anything similar will work)
LEDLamp: https://detail.tmall.com/item.htm?spm=a1z10.5-b-s.w4011-16538328951.66.5b42bf29cMTpOu&id=41300986048&rn=056775a5208ecb09f06e30ce695eae64&abbucket=17&skuId=3206025586110
USB Ext Tube: https://detail.tmall.com/item.htm?spm=a230r.1.14.55.2cab40be5mAAXJ&id=41286248566&ns=1&abbucket=15
Print Settings
Printer:
LM110
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2
Infill:
30% -
Asriel Dreemurr (Undertale) 3D Print Model
Summary
This is adult Asriel Dreemurr from Undertale, made by request from my girlfriend who loves the game.
Asriel just slides in the base (which is reversible, there is the Delta Rune or Flowey, you choose). It holds well, but if you want you can of course add a small dab of glue to hold it in place.
To print Asriel, you will need white and black filaments. Load the STL file in S3D (or Cura, but I don’t use it so I don’t know what the steps are) and go to the “advanced” tab. There, check “Stop printing at” and write 2mm. Save the Gcode as “Asriel 01.gcode” or whatever name you like 🙂
This is for the first part.
For the second part, you just have to uncheck “stop printing at” and check “start printing at” and indicate 2mm again. Save the gcode as “Asriel 02.gcode”.
Load some white filament in your printer and print “Asriel 01”. When it is finished, do not let the printer cool down and DO NOT move the bed at all, load black filament on your printer (don’t forget to purge the wite that is left in the hotend) and print “Asriel 02”. It will print directly on top of the white if you’ve followed the instructions correctly.
In this world, it’s print, or be printed!
Share your makes 🙂
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn’t Matter
Supports:
No
Infill:
100% -
camera stabilizer 3D Print Model
Summary
BOM (name : qty)
M6 8.8 any length : 1
M3 20mm : 20
M3 nut: 20
optional 625zz bearing elsewise print the dummy -
AM8 Duel Mosfets Mount (Or other 2040 Extrusion Frame 3D printers) 3D Print Model
Summary
This is a duel mosfet mount for a am8 frame. Do to the the size of cheap eBay mosfet you might have to drill the holes out very little. This will work with any 2040 Frame printer. -
Prusa MK3 3030 Extrusion Mounted Pi Camera 3D Print Model
Summary
I liked the ball joint flexibility of MoonDoggy’s pi cam design but didn’t want to attach it to the x-axis. So I modded jltx’s hard feet design to attach a ball joint and modded the original camera case to allow the cable to come out from the bottom.
To install first attach the base and bit to the extrusion securely as indicated on the hard feet design. This can be anywhere you like on the printer extrusions. Next insert the ball link into the base and twist it slightly, it should be a tight fit as I had to use pliers. The rest is the same instructions as the cam design. You can use the original camera back on the new camera front. I hid the cam ribbon cable under the printer for tidiness. -
Fish8840 transistor tester box 3D Print Model
Summary
Yet another box for the fish8840 transistor tester.
This one uses M3 x 27 mm bolts to hold everything together, and includes a large box for a battery. I designed the box to hold this rechargeable battery
I’ve included the FreeCAD design file – have fun remixing!
This is my first design that I’ve published to thingiverse – I’d appreciate feedback. Thanks. -
Cartoon Hands Free 3D Model
Cartoon Shape Hands
rigged, thumbnail, image input replaces the render layer in the compositor Hover mouse over uv editor, press hot key f12, or render/animation button, render panel menu. For thumbnail image.
cheers -
Portrait of Lady Mary Douglas Free 3D Model
Portrait of Lady Mary Douglas, made by Sir Joshua Reynolds (1723-1792). Royal Museums of Fine Arts of Belgium (Brussels, Belgium). Made with CapturingReality.
-
Phoropter Near Card Holder 3D Print Model
Summary
This item was created to provide a stable near card position on a standard phoropter near rod. Printing in two pieces allows for rotation around the pivot. The frame was designed to fit the OSU College of Optometry Near Cards, which can be purchased from the OSU College of Optometry (https://optometry.osu.edu/sites/default/files/PDFs/IMC_Materials_List_20170928.pdf). The design allows for multiple card insertion with visibility from each side as the card is rotated. Elimination of a standard phoropter attachment clip provides increased stability. -
Binder strap stopper (2Hole Pitch80mm) 3D Print Model
Summary
Use this with Binder strap 2 hole type.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
ABS is used.
Suitable for Binder Strap (2 holes, 80mm pitch)
Post-Printing -
Cr-10 Hot End Model 3D Print Model
Summary
Just a mock up of the CR-10 Hot end
Using it to design a carriage for my custom printer using my spare cr-10 hot end -
Raggio Lungo Heavy Duty Booties 3D Print Model
Summary
PROTECT THAT SEXY RAGGIO BOTTOM PLATE! These are an even heavier version of the Veloce Heavy Duty Booties, with larger front bumper area and dual landing skids underneath. The outside edge and tip of these booties is a thick shock absorber. There’s a slight channel for your motor wires, and a lip to hold a ziptie around them and the bootie. See photos.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.3mm
Infill:
Any
Notes:
See photos for recommended orientation and support locations. -
Curtain 3D Model
Additional Info: Curtain N190418 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Table 3D Model
Additional Info: Table Taurus N180518 – 3D model (*.gsm+*.3ds+*.max) for interior 3d visualization.
-
Venetial Blind Angle Cord Clip 3D Print Model
Summary
This is a clip that the venetian blind angle adjusting cords connect to. These clips are up in top and slid and clip into place on a ‘D’ shaped rod. When the clips rotate the cord wraps around these clips causing the blinds angle to change.
I printed this on a stock CR-10, horizontally with clip side up.
.1 layer height
100% infill
Support evrywhere
Brim
30 mm/sec
PETG for clip flexibilty
245c Noz
70c Bed
I have included the STL and the SCAD in case you need to modify for your application. -
Tubular clamp 3D Print Model
Summary
My friend needed a clamp to fix a bird feeder support. I made this with multiple cylinders and used VincentD’s hex library to make the holes for the #8 nuts.
Print Settings
Printer:
Anet A6
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% -
tunguska 3D Print Model
Summary
2k22 Tunguska
SA-19 Grison
https://en.wikipedia.org/wiki/2K22_Tunguska -
Mad Hatter Base 3D Print Model
Summary
Not a True Remix… but might be usefull for someone.
Following an idea from user @ wabah58, I just did a quick clean up, with 3DBuilder, of the Yogy bear base placeholders, the file is also from ReddadSteve (https://www.thingiverse.com/thing:2470853)
So its a simple Yogi Base without holes that you can scale at will!
Im printing it right now with 200% scaling on X and Y and left at 100% Scale on Z so it has the same height of the yogi base. At this size I will have space for a few more shrooms… -
Coil Spring Pen Holder 3D Print Model
Summary
I recreated a coil spring pen holder I had came across. Just getting the file out for now, will edit all this stuff when I get a little more time. -
CR-10 Spool Holder 3D Print Model
Summary
I wanted a better spool holder, but didn’t want to completely do away with the stock bracket. This is essentially a sleeve bearing designed to fit over the stock 32mm pipe. It prints in four pieces (you need two dividers) and uses 32x 4.5mm steel BB’s. It can hold any filament spool with a center hole of 54mm or larger.
Print as upright cylinders, no supports. I recommend a brim as it’s not a ton of surface area to stick down. -
Triforce Smartphone Stand Revised 3D Print Model
Summary
This is a minor remix of Rem3_1415926’s Triforce Smartphone Stand. It replaces the inward-sloping shelf with a level shelf and lip — this may hold your phone better.
Thanks, Rem3, for the attractive design! -
Crown 3D Print Model
Summary
Simple crown, printable without support.
I did not like any crown, i could find, so i desing my own.
Designed as a part of treasure, for child’s game/treasure hunt. There is an chalice in same design.
Enjoy. -
Stepper motor mount for FLSun QQ 3D Print Model
Summary
This is for folks who prefer shorter bowden tube & easier to load filament when the printer is position in a confined area. I use a little “bluetak” to make it less likely to slide along the side rail. -
Carpet 3D Model
Additional Info: Carpet Zebra Formdecor N150218 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Fishing feeder cage 3D Print Model
Summary
This is a feeder cage for fishers.
Print it with brims around 1 cm.
You have to drill out the the top and bottom ends in order to get your fishing line through.
I used PLA because it is bio degradable, I printed this at 200 C / 60 C (bed) -
Fume Extractor 3D Print Model
Summary
Fume Extractor is probably a bit of a misnomer as all it really does is to accelerate the fumes away from your workspace while soldering.
I had an old ip camera type mount that uses a standard 1/4 20 camera tripod type bolt on the top. I just threaded it directly into a hole in the base of the fan holder.
The holes on the little funnel might be a bit on the small side, so you may need to ream them out with a drill bit. I used some M5 machine screws directly into the hood piece to hold it all together.
I Added a little 12 volt wall wart and a spst latching button switch with a 12.7mm hole.
Used it last night and it really helped to keep the soldering fumes from going right up my nose.
You do need to keep it a bit close to the work piece in order for it to function
If you really value your health and safety, you might want to search for other ones that actually hook up to a vent tube that would take the fumes completely away.
Print Settings
Printer:
AM8
Rafts:
No
Supports:
No
Resolution:
.28mm
Infill:
25%
Notes:
Pretty basic print. Nothing fancy. -
Tevo Tarantula PSU Vertical Cover 3D Print Model
Summary
This is a PSU cover for the standard TEVO Tarantula power supply. Adds protection as the cables and the terminals are not exposed and it makes the printer portable as the PSU is on the printer. Added grilles for cooling.
Screw it with the default 4mm screws and t4 nuts. You will also need a C14 male power supply connector with switch and fuse and screws/nuts for mounting.
My target was to make it use less material than other designs making it affordable.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25
Notes:
26 meters of plastic with wall and top/bottom thickness of 0.8mm.
16 meters of plastic with wall and top/bottom thickness of 0.6mm. -
Mad Hatter with base 3D Print Model
Summary
I added a base to tie the model together and for added stability since the Hatter is a little top heavy.
Full model and instructions:https://www.thingiverse.com/thing:2902243
The base is flat without indents for the feet or mushroom. Simply position the original model as per the photos and glue it down.
Enjoy! -
Armattan Chameleon Ti – Arm and soft Motor mount / landing gear 3D Print Model
Summary
this an flex protection for the end of the arm and btw , soft mount for your motor and landing gear
Print Settings
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
45
Notes:
print in tpu -
One hand pot opener 3D Print Model
Summary
Simple version of one hand pot opener. With his guide this print is suitable for beginner
Printed the actuator with PLA will allow it to be thermoformed.
Sencilla version de un aparato para abrir un pote con una mano. Con su guía, esta impresión es adecuada para principiantes.
Imprimir el actuator con PLA permite modificar su forma en agua caliente.
Simple version d’un ouvre-pot à une main. Facile à imprimer.
Imprimer l’actuator en PLA permet de modifier sa forme par thermoformage.How it works
Press the actuator with your hip to block the pot. Open it with your free hand
Oprimir el actuator con la cadera para bloquear el pote. Abrelo con su mano libre.
Presser l’actuator avec la hanche pour bloquer le pot. L’ouvrir avec la main libre. -
Da Vinci Jr _ DaVinci Jr Long Dust Plug 3D Print Model
Summary
I remixed ryanmac1911 filament plug and extended it to cover the long filament tube hole on the davinci jr. I then cut it in 2 pieces to it was printable on the davinci jr. Whenever my printer is not is use I removed the filament tube and cover all the holes on the top to keep the inside of my printer dust free!
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci Jr. 2.0 Mix
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15% -
Boba Pouch Forms 3D Print Model
Summary
These are meant to be used as forms for Leather or Vinyl Boba style belt pouches. These printed forms are meant to replace the wood blocks used in Batninja’s Tutorial on the dented helmet: http://www.thedentedhelmet.com/showthread.php?t=8797
The hollow model is meant for vinyl pouches if they’re not holding their shape, you can leave this form in and still have functional pouches. Enjoy! If you make, please post! -
Picture 3D Model
Additional Info: Picture 7j – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Chair 3D Model
Additional Info: Chair Formula N040418 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Small Xbox Game Rack 3D Print Model
Summary
A smaller version of my original Xbox game Rack. This model has space for only 5 games rather than 10. -
Plant Pot 3D Print Model
Summary
I designed this plant pot using Tinkercad.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15% -
Parametric Fractal Trees 3D Print Model
Summary
This is a modified version of an OpenSCAD example by Torsten Paul. With the original one, after extruding, the objects suffered of some strange gapes especially when using higher angles.
I added a few parameters and other modifications to be able to generate 3D printable fractal trees needed for a student research project. The base is parametric too and can be generated with the same parameters as the trees.
Other options:
minimum and maximum angle of the branches
generating random trees or producing repeatable results at each build;
with height 0, the tree will be colored and not extruded
File description:
fractal_tree_module_recursion.scad – to generate custom fractal trees
tree base.scad – to generate custom bases for fractal treesPrint Settings
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
100%
Notes:
Material: PLA
