Summary
Advansed 20mm test cube
I create this model for PLA test
Print Settings
Rafts:
No Supports:
No Resolution:
0.08-0.15
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
20mm Advanced Test Cube 3D Print Model
-
Dual extruder calibration stl 3D Print Model
Summary
Helpfull to choose offset X and Y in the printer setting for double extruder printing.
I use it for raise3d N2 Dual +
After 6 printing – i moved offset X & Y step by step. The calibration was good for bigger printing.
Print Settings
Printer:
Raise3D N2 dual plus Rafts:
Yes Supports:
No Resolution:
0.15 Infill:
30% rectilinear
Post-PrintingHow I Designed This
Tinkercad.com
Dual calibration .stl made with tinkercad.com -
NELO rudder cover 3D Print Model
Summary
This replaces the original NELO rudder cover. No need to, but I plan to put a GoPro connector on this later.
Printing:
I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
Post-print:
To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
Print Settings
Printer:
Zonestar 802P Rafts:
No Resolution:
0.2 Infill:
20-30% will do. Notes:
I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
Post-Printing
To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
How I Designed This
I used 123d designer. File included. Improve if you need, but don’t sell commercially! -
LM27 Enders water tap replacement 3D Print Model
Summary
I created this thing as a replacement for the water tap handle that broke on our LM27 ship.
Print Settings
Printer:
Geeetech i3 Pro C Rafts:
No Supports:
No Resolution:
0,1 Infill:
60 Notes:
I sanded and wiped it with acetone after printing for smooth surface. -
Key Cube 3D Print Model
Summary
Part generated from object seen in youtube video, unknown source.
Print Settings
Printer Brand:
LulzBot Printer:
Mini Rafts:
No Supports:
No Resolution:
0.25 mm Infill:
20% Notes:
Printed using 3 mm PLA
Shell thickness: 1.0 mm
Print speed: 50 mm/s
Printed at 100% scale
Post-Printing
Minimal filing of finished parts. -
Random spaceship Free 3D Model
This space ship hasn’t got any cockpit… sorry
But it has got FIVE reactors ! -
Signe Tegner Free 3D Model
Sepulchral Monument to the Artist´s mother – Signe Tegner (1899), Rudolph Tegner (1873 – 1950), plaster. The National Gallery (Copenhagen, Denmark). Made with Memento Beta (now ReMake) from AutoDesk.
-
Maker Select v2 Z axis Bearing Mounts 3D Print Model
Summary
previously I created a set of X-ends for the Monoprice Maker Select v2 to replace the stock metal ones because I wanted a way to use standard LM8UU bearings for the z-axis. Those have been installed on my printer for the last couple of months, but I figured I’d try making a set of bearing holders in case any of you want to use different bearings, but are happy with the metal x-ends that your printer came with.
These seem to work pretty well. Just screw them in from the bottom, slide the bearing into place, and you should be good to go.
I printed these in ABS with 4 perimeters and 40% infill, but the walls are pretty thin so you could probably do them 100% infill and it wouldn’t make much difference in print time. -
Screw 3D Print Model
Summary
This is a screw I invented in 30 minutes. I does use supports.
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Resolution:
40 Infill:
65% -
BLTouch/3DTouch rear sensor mount 3D Print Model
Summary
This is a remix of https://www.thingiverse.com/thing:2219963 to allow mounting a BLTouch sensor on the rear bearing of an Anet A8. I’ve included the customizer to allow the height
and many other features to be custom set for any printer . The “Measured Height” parameter is used to calculate the correct height with the 8.3mm offset to the nozzle. You simply need to move the print nozzle so that it touches the bed then measure the distance of top mount screw hole (on the rear lower bearing) to the bed. Enter this in the “measured height” field and create. The mount also includes side clearance to allow it to work on new Anet A8’s. Please note that for this mount, you need a mount to bed distance of at least 52mm or it won’t work.
Stock carriage settings:
define X_PROBE_OFFSET_FROM_EXTRUDER 20
define Y_PROBE_OFFSET_FROM_EXTRUDER 61
define FRONT_PROBE_BED_POSITION 61 -
Dragon Boat / 龍舟 — (86Duino Original) 3D Print Model
Summary
龍舟（或稱龍船）是指漢字文化圈的龍形舟，也是中國和琉球端午節競賽活動時使用的人力船隻。
龍舟競渡流傳最廣的起源是，楚國人為紀念投江自盡的屈原，借龍舟驅散江中之魚，期望阻止魚吃掉屈原的身體。
龍舟不單是傳統中華文化的一部分，從其引伸發展出來的龍舟競賽現已發展為體育活動。由於賽龍舟被推廣成為體育項目，因此龍舟同時成為此體育項目的主要用品。
A dragon boat is a human-powered watercraft. They were traditionally made in the Pearl River Delta region of China’s southern Guangdong Province out of teak wood to various designs and sizes.
For more printing object please visit 86Duino facebook and give us a “like” and thanks for the tips…https://www.facebook.com/86duino
喜歡圖檔的好朋友請記得到 86Duino Filament 3D 列印 / 耗材 – 不正經研究中心 粉絲團給我們按讚哦 https://www.facebook.com/86duino
Post-Printing -
Gear Bearing Fidget Spinner 3D Print Model
Summary
I was able to combine the two designs in the remix to create a fully-printable geared fidget spinner. Just add bearings for weights.
Post-Printing
It will take some work to break the gears free, but take your time and it should work fine. If not, make sure your extrusion % setting is correct. -
Jog Forma Teadmill Technogym 3D model Free 3D Model
Cycle (Bike)Original technogym tools.Quality 3d subdividable model (editable poly) include format:3ds, max2015, max2012, mat (vray+standart)Unit – real dimension (millimeters)
-
Vintage Lamp Street 3D model Free 3D Model
Modeled with Autodesk Maya 2016 using polygons.With materials and textures.Mental Rays Mia Material X is used for all objects in the scene. The file called ‘ render ‘ is to render like the first imatge with Maya Mental ray. For best results add a render occlusion on it.Formats mb, fbx, obj and 3dmax.
-
JBL Flip 3 Stand 3D Print Model
Summary
This litte thing will stop your JBL Flip 3 from rolling away!
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2-0.3 Infill:
10% -
Megatron – Transformers G1 3D Print Model
Summary
G1 Megatron leader of the Decepticons. Modeled in sketchup for fun & practice. Print/share/enjoy. -
Anet A8 – X Axis Frame – Stabilizing Rod 3D Print Model
Summary
This is stabilizing rod for the main frame of the Anet A8.
Print both parts. put them together and install them as one rod.
The diameter of the outer holes are 8mm (M8 screws).
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 Infill:
20% Notes:
Use Brim
How I Designed This
Autocad 2017, I share the DWG File if you want -
Electronics Project Box 3D Print Model
Summary
Designed a 18650 project box. (box?) Not sure what to call it…anyway, could be used to make cool electronics projects. I made a subscriber counter using an ESP8266…see video….
Proto Board: http://tinyurl.com/ydxndswz
Rocker Switches: http://tinyurl.com/yd6sd3yv
18650 Battery Holder: http://tinyurl.com/y7ysblvs
Nylon Bolt & Nuts Assortment: http://tinyurl.com/y7k8q2am
M3 bolts(40mm): http://tinyurl.com/y7u2d99p
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
.4mm Infill:
20 ish Notes:
flip the bottom piece over….so no overhang.
Post-Printing -
Armored Vehicles 7-Pack Free 3D Model
This pack is from the same project as the “Armored Vehicles 8-Pack”.
https://www.blendswap.com/blends/view/88574 -
Plastic bot Free 3D Model
Created this by watching andy’s video
Created as fun and this was done with Blender in 3 hours give me that result and the lighting is cool HDRI Lighting ,
The composition’s with Photoshop … -
Vintage Pepper Mill Free 3D Model
Vintage pepper grinder here. I wanted to make something more than a simple spline, and saw this around the web. For me the bevel gears were the big challenge: I wanted them to mesh properly if the model is rigged. I think I got it right; feedback is always welcome. The handle rotates on the X axis. Y’all can take it from there. The model is true to life externally. I don’t know what the interior mechanism looks like, but I think there’s a little daemon inside the spherical part. When you crank the handle, it hates the noise so it smashes your peppercorns with a small sledge hammer. Right? 😉
-
THE RESURRECTION Free 3D Model
I share with you this simple project, using some techniques to create a landscape. The resurrection of Jesus represents one of the most important events for Christianity. (Mar 16:4 And when they looked, they saw that the stone was rolled away: for it was very great.)
Comparto con ustedes este sencillo proyecto, usando algunas tecnicas para crear un paisaje. La resurreccion de Jesus representa uno de los mas importantes eventos para el cristianismo. (Mar 16:4 Pero cuando miraron, vieron removida la piedra, que era muy grande.) -
A Hovel by Leo Hartas Free 3D Model
Paper model textured plans, designed for printing and physically assembling. But this is use of Import Graphic as Plane. Use of K-key in edit mode Kut out and assemble in 3D Space. I would say this is more of a fun model than a functioning model. Original artwork all here, by Leo Hartas 2003. Taken from PDF.
-
Jeep CJ Free 3D Model
Ok now this jeep is my favorite but very bad details
Modeling with blender 3 hours and composition With photoshop
Actually i like the lighting -
Mini Master Free 3D Model
There is my best modeled car Cause i never modeled a nice car all say that’s not good ..
So today i have a nice renders from my car that learned modeling from
Created in 6 hours all the things and composition in Photoshop the scratches and dirty looks , -
Nerf Rival Zeus Stock Attachment Adapter 3D Print Model
Summary
Shove this onto the end of your Nerf Rival Zeus and then you can attach any Nerf stock to the Zeus! There is a hole that will allow a bolt to go through and secure the adapter very well. You may not even need that, it is designed to fit tight. -
Alien 45 degree vtx mount version2 3D Print Model
Summary
redid after holes of version 1 didnt line up, changed my print angles to see what looks better. -
Tevo Tarantula MKS Gen-L Plate w/MOSFET 3D Print Model
Summary
I decided to switch to a MKS Gen-L so I could replace NEMA 17 drivers when/if needed, but I still wanted to use my original plates. While I was designing the new plate, I decided I’d add a side pod to mount a MOSFET out of the way (this MOSFET if you’re thinking of using this https://smile.amazon.com/gp/product/B01HEQVQAK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). I’m still very much a beginner with Fusion 360, so if you can do it more elegantly, please feel free to remix it (and drop me a line so I can see what you did and hopefully learn from it).
The MOSFET is taller than the MKS Gen board obviously, so you might need to use taller offsets than the stock ones from the Tarantula. The sketches in 360 should allow you to print the MOSFET cover separately from the MKS cover. I haven’t printed it yet or I’d tell you all for sure if that’s the case. -
Tapas para arandelas, spinner-Eco 3D Print Model
Summary
Las tapas para arandelas,
una es para trabar y pegar en el circulo, otra se pega externamente..
El pin es de un tamaño de 11mm de diametro pero van a tener que adaptarlo al diametro interno de su arandela. -
Coffee machine 3D Model
Additional Info: Coffee Machine La Marzocco Vulcano Swift N220417 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
3D Flashlight TOPEX Free 3D Model
General InformationPolys: 1078.Verts: 556.Originally created with 3ds Max 2014.Includes high-resolution textures.Includes Formats FBX, OBJ and 3DS.FeaturesThis model was created from photographs of the flashlight TOPEX 94W846.Texture Description-For each model included 4 texture (Albedo, Gloss, Normal, Specular) with a size of 2048*2048.-textures maps: Albedo, Gloss, Normal, Specular-textures formats: PNGFile formats3ds Max 2014 (.max)OBJ (.obj)Autodesk FBX (.fbx)3D Studio (.3ds)
-
Tali’s Mask – LED Sound Reactive 3D Print Model
Summary
Led is sound reactive heres the code:
Also a youtube video demonstrating it. I will create the mask if enough people have interest but heres something Tali cosplayers can use for their masks.
Code:
include
include
ifdef AVR
include <avr/power.h>
endif
define PIN 6
define NUMPIXELS 1
//==============Defining variables for fix_fft=======================
int x = 0;
char im[128], data[128];
char data_avgs[14];
int i = 0, val, steady;
int l = 0;
Adafruit_NeoPixel pixel = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
void setup() {
Serial.begin(9600);
pixel.begin();
pixel.show();
}
void loop()
{
//===================FFT algorithm=======================
for (i = 0; i < 128; i++)
{
val = analogRead(A9);
steady = val;
data[i] = val;
im[i] = 0;
}
fix_fft(data, im, 7, 0);
for (i = 0; i < 64; i++)
{
data[i] = sqrt(data[i] data[i] + im[i] im[i]);
}
for (i = 0; i < 14; i++)
{
data_avgs[i] = data[i 4] + data[i 4 + 1] + data[i 4 + 2] + data[i 4 + 3];
data_avgs[i] = map(data_avgs[i], 0, 30, 0, 9);
}
int value = data_avgs[0];
Serial.print(“Time domain: “);
Serial.println(steady);
Serial.print(“Frequency domain: “);
Serial.println(value);
delay(100);
pixel.setPixelColor(0, 75, 0, 130); //change color here by changing RGB values. In this case R=150, G=150, B=150
int bValue = map(value, 0, 30, 0, 255);
pixel.setBrightness(bValue);
pixel.show();
}Custom Section
-
Decora Rocker Switch 3D Print Model
Summary
This is the switch plate I designed as the front for my home automation switch projects… It is set up to use 2 5mm momentary switches and one 3mm momentary switch (as an inset reset button).
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Notes:
Normal settings for your material should work fine. It is an especially easy print. -
Ornamental fidget spinner 3D Print Model
Summary
Fidget spinner created with VECTARY – free, online 3D modeling tool: https://www.vectary.com
Feel free to customize it! https://www.vectary.com/u/adrianm/ornamental-fidget-spinner
For holes use 608 bearings -
Guía SujetaElevalunas para Audi A4 B5 3D Print Model
Summary
Pieza para sujetar elevalunas eléctrico para Audi A4 B5. Es la pieza que se usa de guía.
Recomendaciones de impresión:Imprimir la pieza con boquilla de 0.2 mm, y un refill del 100% para que quede fuerte. La altura de capa recomendada es 0.2 mm.
Aunque está pensado para PLA, creo que con ABS es posible que dure más y sea más robusta.
Importante: Pieza NO TESTADA -
MTvplot 3D Print Model
Summary
After i discovered the wonderful vertical plotter made by rincey12 and his awesome diy-manual (@ makerblog.at) i decided to make a quite similar design from scratch (and try to improve some known problems by throwing in some bearings).
For the gondola-arms i printed them @100% infill and drilled the small holes (for the cord and the set screws to secure it) afterwards to gain some weight and stability. My whiteboard-markers are ~17mm in diameter, so i used a 20mm aluminium tube as gondola-core and some set screws to be able to use smaller pens (whithout changing the mid-point). Between the bearings i used a printed 0.5mm spacer (some more sizes included).
As i wanted to try it on my already mounted whiteboard, i made some ‘front-side’ holders for the stepper motors (to quickly screw them to your wall-of-interest). The gears are sized for a roller blind cord with a sphere diameter of 4,5mm and a distance (mid-sphere to mid-sphere) of 12mm.
To finally operate it, i used the fantastic polargraph-code made by Sandy Noble.
Part-list:
5m roller blind cord 4,5/12
2x deep groove ball bearing 6004 2RS 20x42x12 mm
2x stepper motor – NEMA-17 200 steps/rev, 12V 350mA
1x Geekcreit UNO R3 ATmega328P Development Board For Arduino
1x Motor Drive Shield L293D For Arduino
8x set screws M4 (10mm)
1x aluminium tube (20mm outer diameter, 1mm thick)
some M2/M3/M4 screws to secure the motor holders, servo and gears
(all these parts + shipping to germany cost me around 80€ in the end)
Big THX to all previous makers and coders providing awesome ideas/manuals & software, this was/is a very cool project. Happy for questions/remarks if you have some.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
.2 Infill:
100 (motor holders 50) Notes:
NGEN with ext/bed 225/80°C on glass
How I Designed This
Fusion 360 -
3D model Cycle Group Technogym Free 3D Model
Cycle (Bike)Original technogym tools.Quality 3d subdividable model (editable poly) include format:3ds, obj, fbx, dwg, max2015, max2012, mat (vray+standart)Unit – real dimension (millimeters)
-
Spazio forma technogym, open closed gym run 3D Free 3D Model
Original gym run, Cardio line – spazio forma technogym.Quality 3d model (editable mesh) include format:3ds, obj, fbx, max2015, max2012Without light, camera and *smooth.Unit – real dimension (millimeters).
-
Leather steal chair Free 3D Model
Design and modeled in Maya 2015, textured and render ready for Corona.
-
Arched Cube Top Hook / Holder 3D Print Model
Summary
An arched cubical wall holder, designed for plate-topped cubicles. I made this mainly for holding white boards and smaller signs, but it could be used for just about anything that has a standard mounting slot.
Update: Added another hook with the holder knob rotated 90°, for those with side-slotted boards.
Print Settings
Printer:
101Hero Rafts:
No Supports:
No Infill:
20% Notes:
Note that infill is less important due to the design of the thick holder edge. The edge has forced built-in walls across the print axis, making that part stronger than a heavier infill alone could achieve. -
Stubby Wrench Holder – Metric 3D Print Model
Summary
Wrench Organizer for Harbor Freight 12pc Stubby Combination Wrench Set. Tray is designed for Metric wrenches in the set.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.3 Infill:
20% Grid -
etchachip 3D Print Model
Summary
my version of a CHIP-E
Print Settings
Printer:
prusa i3 pro b Rafts:
No Supports:
No Resolution:
0.2mm layer Infill:
10 % -
Anet A8 Filament Guide 3D Print Model
Summary
Hi!
This is a simple, clip on/slide on, filament guide that I made for my Anet A8. it’ll fit on anything that is 8mm thick.
It clips/slides on the top part, right between the screen and the buttons.
What’s different about this one is that it’s in two parts (both parts are “joined” by the smallest possible bridge so you print both in one file then detach the side part)… The big part has a gap where you can slide in your filament (you have to take It off the printer to do that), and the small part fills that gap once you’ve put in your filament. I thought it’d look neater that way.
I printed at 60mm/s with 15% infill and it was fine, although printing at 30mm/s gave me a better finish..
sorry for the photo quality, taking good photos of black parts is really hard.
Oh! there are two separate STL files, one has a straight “middle”, and the other one has a cross-shapped notch. I printed the straight one and it sits perfectly, but I thought having a notched one might be more secure. Print whatever you choose and comment about it. -
torlo 3D Print Model
Summary
The torlo was born out of the idea of using a simple oscillating motor as a power source. The Voice coil of a scarp laptop HDD fit the bill nicely. The Voice coil with its powerful magnets has enough brunt to push a bunch of 3d printed gears .The basic idea of the torlo was adapted from the previous holo clock and taken further. The gears of the clock hang to one side and the rings to the other side of the frame. The voice coil is located in the center of the drive train and is driven by a attiny pulsing it every 2 seconds. The balance wheel when pulsed pushes a cam and a ratchet to turn the clock 2 seconds further. Rest of the clock is a simple drive train driving the minute and hour rings which display the time..
The clock is a slightly complex project because of the intricate printed parts needed. It is a little finicky to assemble and needs a lot of patience.
All the parts are printed with a 0.4mm nozzle at .2mm – .25mm layer height. The gears need to be a little loose so if the printer is not calibrated nicely they will freeze.
-
Armchair 3D Model
Additional Info: Armchair lounge N240417 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
3D Space Rabbit model Free 3D Model
– Space Rabbit 3d model,- Modeled and animated on Cinema 4d r17. (Render Ready)- Formats: .c4d .fbx .obj .3ds- Realtime render on Sketchfab- Scene consist of 59547 polygons.
-
Crystal 3D Free 3D Model
Crystal_…………………296 polygon. ……….150 vertices.2048 * 2048Texture.obj , fbx , and blend format models.game ready……………………………………..
-
Gravity Wave Spectrogram 3D Print Model
Summary
This is a spectrogram of the gravity wave created by the collision of two black holes and detected by the LIGO detector in Hanford WA during event GW150914 on 14 Sept 2015. The big peak shows the “ringdown” increase in intensity of the high-frequency components as the black holes spiral together faster and faster. From https://losc.ligo.org/events/GW150914/ -
Megatronic card mount 3D Print Model
Summary
Two minimal designs to mount megatronic v3.0 (3.1?) card on 2020 extrusion.
I let some room on each side because I planed to make a cover with fan mount later.
It need 5 M3x10 screws.
I didn’t printed the light version yet as the plain version is more suitable for my case because it protect the back of the card from any accidental contact with the frame.
Print Settings
Printer:
custom Rafts:
No Supports:
No Resolution:
.3 Infill:
25 to 30 -
Hubcap for Gen2 Prius 3D Print Model
Summary
This is a small cap to cover the central hole in Toyota Prius wheels from the Gen2 line. The “Touring” model has nice-looking alloy-spoke wheels and you can dispense with the factory hubcaps — but the axle bolt remains visible. This little cap fits in the center of the wheel and snaps into the same small interior groove that holds the center of the factory cap in place.
You can customize it with your own logo/initials/whatever, of course!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Yes Supports:
Yes Resolution:
200 µm Infill:
100% Notes:
This is a structural part and I did not skimp on the material.
I printed (and deployed) it in Colorfabb XT material, which is a little tougher than many PLAs, with a bit of springy “give” to it. ABS might be a good choice too. Given the environment I would not print it in PLA.
Print this the opposite way that you might think if you’re used to avoiding bridges — it should look like a mushroom on the print bed, with the cap forming a large bridge. That makes the visible part (the rounded cap) come out cleaner.
I prepared this with Slic3r. Supports were ON (“rectilinear” setting with 3mm support spacing). -
3D Z-95 Headhunter Free 3D Model
This is a low poly Z-95 Headhunter suitable as a game asset.Contains FBX and unity package format. Textures and normal maps are included.The screen shots are showing the unity package, if importing the FBX provided textures and maps may have to be applied manually.The engine effects shown in the screen shots are only included in the unity format.
-
3D model TIE Line Fighter Free 3D Model
This is a low poly Z-95 Headhunter suitable as a game asset.Contains FBX and unity package format. Textures, normal and emissive maps are included.The screen shots are showing the unity package, if importing the FBX provided textures and maps may have to be applied manually.The engine effects shown in the screen shots are only included in the unity format.
-
Nebulon-B Medical Frigate 3D model Free 3D Model
This is a low-poly Nebulon-B Medical Frigate suitable as a game asset.Contains FBX and unity package format. Textures, normal and emissive maps are included.The screen shots are showing the unity package, if importing the FBX provided textures and maps may have to be applied manually.The engine effects shown in the screen shots are only included in the unity format.The red stripes along the sides of the ship are a separate material, making it possible to tune the color in a game engine.Because this is a medical frigate, it has no hangar bays or mounted weapons.
-
Printable Fidget Spinner 3D Print Model
Summary
A custom fidget spinner using the 608ZZ bearing. Holes in the lobes are designed to hold quarters. Designed for RepRap printers with heated build plates. Print out the spinner frame twice and glue it together. See picture for example.
Print Settings
Rafts:
No Supports:
No -
Transgender Symbol Ring / Napkin Holder 3D Print Model
Summary
A tripled Venus, Mars and Mars with stroke symbol (“⚧”) to represent transgender people.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
.2mm Infill:
10% Notes:
Printed using a single extruder with with five pauses, one for each color change. The photos show the model printed at 110%. Print it larger to get a napkin holder. -
The Delta Troubadours – Guitar Pick Bowl 3D Print Model
Summary
Made this guitar-pick shaped guitar-pick bowl for a dear friend who is in an amazing thriving band – The Delta Troubadours. This pick bowl is a very nice way of keeping track of all your guitar picks, because we all know how often we lose and misplace those!
Check out the talented The Delta Troubadours at https://www.facebook.com/thedeltatroubadours
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.15 or 0.10mm Infill:
10%, or none Notes:
The print is pretty straight-forward, but it looks much better if printed in dual-color. Lay the bowl flat (no duh), and set a color-switch during the layer where the band name starts. Printed really well with PLA, PET, and ABS, all at standard temps. -
Ancient Building 3D Print Model
Summary
Ancient Building -
Monoprice Select Mini extended bed brackets 3D Print Model
Summary
Extended the bed brackets to utilize the 300x200mm Anodized Aluminum Y Carriage Plate XL Upgrade for Prusa i3.
I have not tested, printed or fit as I have yet or order the carriage plate. If successful it will use the carriage, heat bed and borosilicate glass from the prusa I3 for the monoprice select mini. -
Panel 3D Model
Additional Info: Panel arabica wall N210417 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Rack 3D Model
Additional Info: Rack N030617 – 3D model (*.gsm+*.3ds+*.max) for interior 3d visualization.
-
Hypercube Evolution Additions/Mods 3D Print Model
Summary
Please try, but I have not actually tried this yet, I’ll try to modify if I get feedback. -
Butterfly House 3D Print Model
Summary
House for the butterflies -
Hydra Star V-1 3D Print Model
Summary
First version of the Hydra Star spinner. Slide in the bearing and it’s ready to go. -
Cartoon Mill On Island Low Poly Free 3D Model
Present to you a low poly mill on Island. Scene was created in minimalist style with acute forms. A distinctive feature of the 3D model is completeness of the scene. This low poly mill can become some part of your wonderful 3D world.Features of Cartoon Mill On Island Low Poly 3D Model- Model’s are optimized for easy import into any existing project- No special plugin needed to open scene- All materials have their titles- Correct and simple mesh- Very easy to change- Clear hierarchy of models- Model’s are ready for animationWhat included in model- Low Poly Mill- Island- Tree3D Formats- .max (3Ds Max),- .c4d (cinema 4d),- .mb (Maya),- .blend (Blender),- .fbx (multi format),- .obj (multi format)Hope you like it! Also check out my other models) If you intend to buy the models, please leave feedback in the comments and rate me.If you have questions you can drop me a message on 3DExport or write me an email: lowpolylab@gmail.com
