Download Free 3D Model Hubcap for Gen2 Prius 3D Print Model

Summary
This is a small cap to cover the central hole in Toyota Prius wheels from the Gen2 line. The “Touring” model has nice-looking alloy-spoke wheels and you can dispense with the factory hubcaps — but the axle bolt remains visible. This little cap fits in the center of the wheel and snaps into the same small interior groove that holds the center of the factory cap in place.
You can customize it with your own logo/initials/whatever, of course!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Yes Supports:
Yes Resolution:
200 µm Infill:
100% Notes:
This is a structural part and I did not skimp on the material.
I printed (and deployed) it in Colorfabb XT material, which is a little tougher than many PLAs, with a bit of springy “give” to it. ABS might be a good choice too. Given the environment I would not print it in PLA.
Print this the opposite way that you might think if you’re used to avoiding bridges — it should look like a mushroom on the print bed, with the cap forming a large bridge. That makes the visible part (the rounded cap) come out cleaner.
I prepared this with Slic3r. Supports were ON (“rectilinear” setting with 3mm support spacing).