Summary
Per request from my son, I remixed the case to have Minecraft logo and pickaxe and a creeper. Enjoy.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Yes Supports:
Yes Infill:
20 Notes:
You have to print it backwards with support. It takes 3 hours and it uses more materials, but the finish is the best. So the Minecraft logo has to be on top, not bottom.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Alcatel One Touch Idol OT-6030D Minecraft Case 3D Print Model
-
Cartoon heads free 3D print model Free 3D Model
For 3D-printable model in stl format and also obj format.I hope you’ll like it.
-
Christmas ornament for Simple Modular Tea Light 3D Print Model
Summary
A few simple designs built for my Simple Modular Tea Light design. These were designed as gifts for friends and family. If you make one, I would love to see. Please post makes and remixes to share with the community.
Print Settings
Printer:
Raise3D N2 Plus Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.20 Infill:
.25 Notes:
The “Gem” design prints fairly well without supports, but, for me the “Halo” one needs them to turn out well. -
Votive Holder for Simple Modular Tea Light 3D Print Model
Summary
A simple votive built for my Simple Modular Tea Light design (Candle version 1). If you make one, I would love to see. Please post makes and remixes to share with the community. -
Alien Head Wall Hanger 3D Print Model
Summary
Alien Head Wall Hanger
Not yet printed
Command strips, no nail holes -
Shimano/Maglock Cleat Adapter 3D Print Model
Summary
This is an adapter to allow large longitudinal (fore/aft) adjustment of the pedal-axle relative to the foot when using a Shimano SH-RP5 bike shoe with a Maglock Stealth magnetic pedal system. Via recent research showing benefits from using a more aft position of the pedal’s axle relative to the foot, the opportunity to experiment with a large range of fore/aft foot position may yield comfort and power advantages.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator (5th Generation) Rafts:
Yes Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
35% Notes:
Omitting supports causes pretty rough printing of the low-angle overhang region, but this doesn’t seem to affect functionality (this is a purely functional piece after all). -
Large Outdoor Cat House 3D Print Model
Summary
The original SketchUp file is included so you can get all dimensions and angles for recreating this yourself or make modifications as you wish.
The inside dimensions are about 34″x18″. This perfectly fits the common heating pad made by K&H Manufacturing found on Amazon.
The front window takes a 6.5″ square piece of 1/4″ glass or plexiglass. It slides in from the bottom and the bottom window molding screws onto the house from the inside using a 1.25″ long wood screw.
The entire house is constructed out of 1″ thick boards, except for a few 2″x2″ boards.
The front door is sized for a large cat (15 lbs). If your cat is smaller, you can subtract 1″ from the opening width and height.
The roof is attached using a 3′ long continuous hinge (pictured). I highly recommend stainless steel for the hinge and the wood screws. -
new chain mail mesh 3D Print Model
Summary
no supports needed. scalable. mesh2v3 is a grouping of the individual links. editable in fusion 360 to change the shape of the plates
Print Settings
Printer:
3d Platform Workseries Supports:
No Resolution:
0.15 or higher Infill:
10% min Notes:
please share any completed or modified prints -
Balcony Pot Plant Holder 3D Print Model
Summary
My girlfriend likes plants. She got a bunch of bread pans that we liked the aesthetics of. due to restricted balcony size i came up with these brackets. the first version allows you to hang one, while the second allows to hang one while placing the second one on top.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.25 Infill:
100 Notes:
took about 1h30m for the 2 to print -
DIY/Benbox Chinese laser bracket/mount 3D Print Model
Summary
I made this because the best height for my laser was having it raised to this point. I also dislike the acrylic parts, and wanted some color. I used one of the bracket packages on here, and reworked to fit this. It also adds some rigidity to it. Enjoy!
Print Settings
Printer:
Creality CR-7 Rafts:
No Supports:
Yes Resolution:
.25 Infill:
20% Notes:
It takes about 4 hours on my machine, but I have 2 others to print other stuff with. I did use a 10 pass brim to aid in adhesion. Printed with Inland PLA, Peak Green. -
#TealDroneChallenge Toy Brick Mount 3D Print Model
Summary
This simple yet intuitive design lets anyone with a teal drone to customise their drone themselves.
Just add any compatible toy bricks and let your creation soar.
This adds different aesthetics to the drone, allows things to be mounted to it and will fulfill childhood memories of making your creations fly.
(just a side note:) Thank you teal for the competition and i hope you consider choosing my design for the grand prize. -
hockey stick extender 3D Print Model
Summary
Hi, I had to extend hockey stick for my daugter – so I made this extender. Meant to fit in bauer total one kids
Print Settings
Notes:
put on the bed on the widest part of the extender. printed with PLA 0.3 mm -
Jeep Grand Cherokee Key Fob Repair 3D Print Model
Summary
My Key fob for my jeep broke a while ago… good thing i bought a 3D printer.
Should fit snugly, just add some glue. -
Webcam mount for 2020 rail. 3D Print Model
Summary
I made this mount to mount a cheap YoLuke webcam from Amazon on my 3D printer. The printer has an Octopi setup on it and I wanted to be able to check up on prints for anywhere in the house.
Hardware needed:
Reused the hinge pin from the Webcam
2 x 3mm x 8 screws
2 x 3mm t slot nuts.
Print Settings
Printer:
Tronxy X5S Rafts:
No Supports:
No Resolution:
.2 Infill:
25 -
Lithophane Stand with Candle Holder 3D Print Model
Summary
This is a stand that holds a lithophane and a candle to make it glow. To make the lithophane, go to http://3dp.rocks/lithophane/
Settings for Lithophane:
Main page – Outer Curve
Image Settings – Positive Image
Holds a standard tea candle. Fit can be a little tight on some of the lithophanes, a little sanding makes it fit fine. Plus you can swap them for different images whenever you want!
Pretty new to 3D printing, so I’m open for feedback!
Hope you all like it!
Print Settings
Printer:
Monoprice MP Select Mini Rafts:
No Supports:
No Infill:
20 -
Darth Turkey 3D Print Model
Summary
Even the dark side enjoys Thanksgiving. Enter Darth Turkey! This model was inspired by a school craft my nephew brought home. I used Meshmixer to combine 3 other projects.
Silly little turkey modelhttps://www.thingiverse.com/thing:1124349
Darth Vader Key Fobhttps://www.thingiverse.com/thing:860156
Lego Minifig Darth Vader Chest platehttps://www.thingiverse.com/thing:580394
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.10mm Infill:
15% Notes:
To get the multi-color effect, I changed the filament a few times during the print.
0.0 Vertigo Grey
4.1 Silver
10.0 Vertigo Grey
10.5 Black
Note: These values would only work if printed at 100% scale and 0.10mm resolution. -
Venturi tube 3D Model
Venturi tube inlet 5 inches outlet 4 inches ideal for focused air extractions. designed in inventor to be editable to other measures
-
Geoboard isometric 3D Print Model
Summary
Geoboards Are essential to teach children the concept of Area and multiplication
Print Settings
Printer:
Dremel Idea Builder Rafts:
No Supports:
No Resolution:
0.3 Infill:
10 Notes:
takes 6 hours to print -
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC 3D Print Model
Summary
button MICRO WAVE COMBINED FEATURED DX 24 WHITE
bouton MICRO ONDES COMBINÉ VEDETTE DX 24 BLANC
Print Settings
Printer:
Discoeasy 200 Rafts:
No Supports:
Yes Resolution:
0.08 Infill:
50% -
NOW 3D Print Model
Summary
Just a Now’Clockhttps://stealtimeback.com/
Print Settings
Printer Brand:
DAGOMA Printer:
Neva Rafts:
No Supports:
No Resolution:
0.2 Infill:
normal Notes:
Easy to print, with change filament option / PAUSE function > on the NEVA 3D printer. -
Dicey Peaks Board Game 3D Print Model
Summary
Dicey Peaks is a tile and dice game of exploration and risk-taking, featuring a balance of luck and crucial decision-making as players race to be the first to reach the flag at the summit of Yeti Mountain! I have given you a choice from two dice styles. -
tattletail 3D Print Model
Summary
This tattle-tail from tattle-tail
I used 123d design to make the solid form and blender to sculpted the face and details
How I Designed This
I used 123d design to make the solid form and blender to sculpted the face and details -
Sainsmart Logo Keychain 3D Print Model
Summary
I just found out a won a Sainsmart T-shirt and designed this to celebrate! When I sent Sainsmart the pic on instagram, they requested I put it up on Thingiverse and here we are!
I designed this to be printed in Sainsmart TPU in dual color, as seen in my picture. The layers stuck really, really well! In fact, they may be bonded even better than layers of the same color!
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
0.1mm Infill:
15-25% Notes:
I print at 220C/50C on glass with AquaNet. My initial layer height is 0.2mm and my layer height is 0.1mm. My top and bottom layers are 0.8mm thick (8 layers). I print around 20mm/s with the fan at 100%.
How I Designed This
Designing a Keychain (Fusion 360)
Simply find the logo you wish to design, save it, and open Fusion. Now go to the “insert canvas” option and insert the image. Next, trace it with the tools in the sketch tab (I like arches, circles, lines, and conic curves with roh set to 0.5). FInally, extrude whatever you want to be printed and add a small ring for your keychain! -
Evangelion Head Input 3D Print Model
Summary
Designed in tinkercad, you will need a 5cm brooch as you can see in the pictures
Print Settings
Printer:
Tronxy X3 Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
25%
Post-Printing
paint with black and white -
Gnome 1 3D Model
Original author’s work.(stl )The model was prepared for printing on 3D printers.100mm/57mm/52mm
-
100Hex Twirl 3D Print Model
Summary
Hexagon for 100Hex https://www.thingiverse.com/thing:2477471
Other hexagons at https://www.thingiverse.com/thing:2612800
Print Settings
Printer:
Anet_A8 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% Notes:
Nozzle 0.4mm
Layer height 0.2mm -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels and added mounting holes. -
3 Inch wheel chocks, with mounting holes 3D Print Model
Summary
Scaled to fit 3 inch wheels, and added mounting holes. -
3.5 Inch Wheel Chocks With mounting holes. 3D Print Model
Summary
I took Fireflynj wheel chocks and added mounting holes. -
placa en relieve 3D Print Model
Summary
placa en relieve
Print Settings
Printer:
hephestos Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% Notes:
placa en relieve
How I Designed This
placa en rellieve -
A ring with a diamond 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 3,900 gramweight in gold silver 2,600 gram
-
Hand Rail Bracket Hook 3D Print Model
Summary
This hook slides overtop of your handrail bracket. It provides great storage on the stairs for bags you need take on the go!
I scaled these hooks to my handrail brackets, but they should work fine if you scale them up or down to fit your handrail bracket sizes.
Holds up to 15 LBS!
Print Settings
Infill:
100 Notes:
I would recommend 100% infill if you have something heavy to hang.
I have tested this with up to 15 LBs and it holds it fine when using 100% infill.
How I Designed This
TinkerCAD.com -
Halo Chain Gun Turret 3D Print Model
Summary
Cut of the Halo warthog chain gun. https://www.thingiverse.com/thing:2638418
You could add this to other custom makes or toys. -
Oval rail end cap 3D Print Model
Summary
I used 115mm x 43mm oval “cattle” rail to make roof racks for the car. I needed to cap the ends to stop wind noise so I designed these.
Cattle rail can be used for all sorts of things apart from fencing and these end caps finish it off nicely.
I use a dab of Trex to hold them in place but you could also use a rivet or screw.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
No Supports:
No Resolution:
0.2 Infill:
100% -
Tormach TTS Tool Tag 3D Print Model
Summary
Print it out and use a sharpie or paint marker to put a tool number on it. Then snap it into the ATC grove of a TTS tool. -
The Last Jedi First Order Executioner Stormtrooper Helmet 3D Model
The Last Jedi First Order Executioner Stormtrooper Helmet 3D print modelStar Wars The Last Jedi First Order Executioner WEARABLE Helmet!All the details are separated, welded, cleaned and totally print-ready.You will get:- Helmet (4mm wall thickness)- Nose (6mm thickness)- Aerator- Antenna (multiply by 4pcs)- Visor templateHelmet is a one-piece model.You will have to divide it by yourself, if it doesn’t fit your printer size.We recommend to print it 0,2mm layer height and 0,4mm nozzle.Please NOTE: This model is for personal use only! No resale or commercial usage allowed!Enjoy! 🙂
-
Women ring with stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 5,500 gramweight in gold silver 3,700 gram
-
Ring black sun mascot 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 6,500 gramweight in gold silver 4.400 gram
-
T-Fix insert for n-handle Suex scooter 3D Print Model
Summary
T-fix insert for tho N-handle/Powergrip-handle of Suex DPV´s -
Sandpaper holder 3D Print Model
Summary
You will need some infill if you want a bottom on the model, I use around 20-30% infill
Print Settings
Printer:
Alunar M505 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
20-30 -
Nintendo SNES Cartridge Dust Cover / Storage Sleeve 3D Print Model
Summary
This thing is a storage solution for SNES (Super Nintendo) cartridges. Normally, SNES cartridges don’t stand on their side. This cover fixes this problem so you can store your SNES carts vertically on a shelf conserving space and allowing you to see all your cartridges. This cover is modeled after the classic NES dust cover.
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
Doesn’t Matter Notes:
The walls are sized to print 2 shells thick on a Replicator 2. At 0.2mm layer height this takes ~1 hours 30 minutes to print.
NOTE: If you have trouble with your replicator creating a weak seam at the “zipper” try setting your “retractDistance” to “1.1” or “1.2”. -
SX350J vape mod with 26650 or 18650 adapter V2. 3D Print Model
Summary
SX350J vape mod with 26650 or 18650 adapter V2.
For YiHi SX350J Boxer mod by Ginger Vaper, just disassemble the mod and transfer everything (except lower battery connector) into this enclosure. This enclosure only use 1 battery (26650 or 18650) so you can charge the battery directly using USB port. -
Box for tea bugs 3D Print Model
Summary
I am baying big package of tea (100 bugs) and this big box looks on my table is not good.
I made small box for tea bugs.
Use PLA plastic or harmless for food.
Print Settings
Printer:
Anet A6 Rafts:
No Supports:
No Resolution:
0.2 Infill:
10 Notes:
PLA -
Mario Odyssey Spinner 3D Print Model
Summary
A Mario Odyssey spinner! Not much more to say other than this: Odyssey is awesome! Almost as good at 64 and Sunshine. Perhaps even just as good as those two. -
Jarl – Vikings Tile Laying Game 3D Print Model
Summary
In the long winters between raiding seasons, warriors keep their intellect sharp through games of wits and chance in this game of stone placement filled with tactics and subtle maneuvering for victory.
Jarl – The Vikings Tile Laying Game is powered by The Duke game mechanic.
Players move their warriors (tiles) around the board and flip them over after each move. Each tile’s side shows a different movement profile. If you end your movement in a square occupied by an opponent’s tile, you capture that tile. Capture your opponent’s Jarl to win! -
Ikea Lack Table Filament Guide 3D Print Model
Summary
Build this as a filament guide through a 1/4″ hole I drilled in my Ikea Lack Table for filament.
You can view and/or download the source file from here
The exterior diameter is 4.5mm while the interior is 3mm (good for 1.75mm filament, which is my use case)
I plan to make a better version of this soon, but this is currently what is fitted in my setup until after the holidays.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 Layer Height Infill:
100%
