Summary
I was tired of constantly moving my Diet Coke around my desk and forgetting where I put it as I worked on projects, so I made this handy Can Holder that clips to the edge of my desk. It’s specifically designed for the dimensions of my workbench, so that the bottom clips into the support member that runs along the front of the desk.
The clip consists of two pieces – a hook and arm, which both attaches to the desk and supports the weight of the can; and a ring, which prevents the can from tipping off. There are small taps projecting from the ring, which lock into slots in the arm to secure the ring in place without adhesive.
Works with 12 oz. bottles as well.
Print Settings
Printer:
Wanhao i3 V2.1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20%
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Desk Hook for Can 3D Print Model
-
Wizard x220 POD with screw silos 3D Print Model
Summary
Haven’t gotten to print it yet but I have spent hours designing it in fusion. The dimensions are solid. There are “screw silos” to hold down the pod, insert a 3m nut into the area designed for it, screw the screw in from the bottom to hold it down. There are two versions, a 20mm stack and 30mm stack option. The camera holes were designed to offer up to 45 degree camera angle for a runcam swift 2 or similar casing. I would recommend printing in TPU semi flex, or nylon if your printer is calibrated well. There is very little margin left for error in printing when in a hard material. -
Pen holder for CNC 3D Print Model
Summary
Pen holder for a home/hobby CNC. This thing is designed to be used with two 1/4-20 bolts. One screws in from the flat side and is chucked into the router’s 1/4″ collet. The other is used to lock in the pen or pencil. Neither of the holes are designed with threads inside. I printed at 60% infill so it wouldn’t flex while drawing and there would be plenty of material for the bolts to cut threads into.
Set the pen so it looks like the tip is in line with the spindle center. Lower the Z axis until the tip touches a piece of paper. Rotate the spindle/collet 360 degrees. If the pen draws a circle, it needs to be adjusted. If it stays in one spot and just makes a dot, you have it set correctly.
The pen slot is sized based on a standard Sharpie Permanent Marker, with about an extra millimeter of radius for slightly larger pens. The side opposite the set screw is tapered to a point to accept smaller diameter pens too.
Print Settings
Printer:
Clone of a FlashForge Creator Rafts:
Doesn’t Matter Supports:
No Resolution:
.2 Infill:
60 -
Boba Fett ROTJ Gauntlet hose connector 3D print model 3D Model
Boba Fett ROTJ Gauntlet hose connector 3D print modelROTJ Right Gauntlet Hose Connector Part for 3d printing
-
Saint Seiya – Seiya de Pegaso 3D Print Model
Summary
Un nuevo modelo de los caballeros del zodiaco !!!
Espero lo impriman y compartan sus obras de arte de estos fantásticos personajes de uno de mis animes favoritos!!! -
Foldable quadcopter FPV 3D Print Model
Summary
This project is not completed yet … however for those who is interested in there is also FreeCAD file available. -
D&D Dice Box 3D Print Model
Summary
A remix of my existing dice box. It is modified to contain a standard set of 7 polyhedral dice and have a larger rolling tray. Additionally, definition to the book pages has been added. -
Laser Cut Chistmas Scene 3D Print Model
Summary
In order to build this Christmas scene you gonna need a 2,50mm thick sheet of something that can be laser-cuted. Here we use a thin sheet of MDF like (used pcb industry for shipment)
We cut it thanks to a Gravograph LS100IQ with following params:
Power 100%
Speed 15%
We use wood glue to maintain the cohesion of the whole.
Advice: Glue everything in the order of your choice, just keep the top piece for the end.
Enjoy! -
Hork-bajir 3D Print Model
Summary
This is a Hork-bajir, an alien from the Animorphs books series (copyright Scholastic). Big thanks to YahooJapan, for their extensive database of models that I drew upon for parts to combine in Meshmixer, in order to make the various Animorphs aliens. -
Arizona Cardinals Logo (Football) 3D Print Model
Summary
For dual extruder. Change the black to red at the red level, change the white to orange and the right level.
For a single extruder use the Cardinals x3g file, which was created in Mackerware slicer software.
How I Designed This -
Zen Watch 2 Protector Case 3D Print Model
Summary
Remixed from JimmyHoffaHendrix’s case. Simplified the geometry and tightened the fit.
Print Settings
Printer:
Prusa i3v (MakerFarm) Rafts:
No Supports:
No Resolution:
0.3mm Infill:
100% -
Airsoft Swipe Phone 3D Print Model
Summary
Plastic dummy phone with fun swiping action to keep your mind off checking your messages every 5 seconds. Takes six 6mm plastic airsoft BBs. Simply pop them in with as much force as needed. Harbor freight sells hydraulic presses, or you might find a friendly steamroller driver at a nearby active construction site. -
Kinetic Aerial Spear-X FPV Camera Mounts 3D Print Model
Summary
Simple FPV camera mounts to fit either 1177 style camera or the Micro.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
.20 Infill:
100 Notes:
TPU/TPE -
Dachshund for 3d printing 3D Model
This is a printable/3d print ready sculpture.Buying the model you get: STL, FBX OBJ files.—————————————————————————-From STL file you can print the model on a 3d printer.The STL file is fully ready for printing.Length 150mm, width 39.33mm, height 30.30mm.If you wish, you can specify any size before printing.—————————————————————————-The model has a hole in order to reduce the amount of materials for 3D printing, i also added a model without a hole.
-
Cross with patterns 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 7,200 gramweight in gold silver 4,900 gram
-
Sdkfz 11 3D Print Model
Summary
Remix of Bergmans 1:100 Sd.Kfz 11 with closed canvas top. Tracks and (improved) wheels are separated, some minor details added. -
Fruit fly trap 3D Print Model
Summary
Get rid of the annoying fruit flies (Drosophila). Well, it is a war you probably cannot win completely, but you can significantly reduce their numbers.
1) get a suitable glass or cup – so you can see inside.
2) measure the rim diameter and scale the print to fit your glass. If you print slightly big, you can easily fix it binding a tape around the glass rim.
3) drill cca 1-1.5 mm holes to the inner cones. Make lot of holes, so that the flies can smell the lemon. See the pictures – I have cca 6 holes per cone and it worked fine. Also drill a hole at the tip of the cones if it prints too tiny. Too big – they will find a way out. Too small – they will stay outside…
4) take a squeezed lemon, put it in the glass, close it with the trap and see the flies coming in.
5) make sure to empty the glass before the lemon gets mildew or is rotten. It is clever to open the trap outside your living quarters 🙂
6) use lemon or other fruit that is loved by the flies. I have tried a lemon concetrate juice and the flies ignored it… -
Octoprint discoeasy 200 pi zero W case 3D Print Model
Summary
Coque pour octoprint sur Raspberry Pi ZERO W sur discoeasy200 a fixer sous l’écran
photos a venir -
cooking pot toy 3D Print Model
Summary
A quick design – simple yet useful toy for child cooking. Prints without supports, the handles may be a little challenge for the printer but somehow it printed quite well at the original size. The wall may be too thin, but it endured the child play for several months (until someone stepped on it 😉 -
Twist in line level holder/bracket for 2020mm, 2040mm 3d printer frame. 3D Print Model
Summary
Twist into aluminium slot to hold line level with line nubs removed. The HD Empire line level was used for sizing.
Print Settings
Printer:
CR-10s Rafts:
Yes Supports:
No Infill:
20% -
Drop through longboard risers / shock absorbers 3D Print Model
Summary
Designed these to add some shock absorption to my longboard with TPU risers and reduce the teeth-rattling feeling I had going over cobblestones. These fit standard drop-through trucks and match the hole pattern for mounting. They’re 2mm tall which allowed me to fit them without getting longer screws for the truck mounts, use the scale z command if you’d like them thicker/thinner.
These were printed with Ninjaflex Semiflex on Ultimaker 2+ with 100% infill
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Rafts:
No Supports:
No Resolution:
0.1 Infill:
100 Notes:
Ninjaflex Semiflex prints well slowed down to 20-40mm/s and retraction off.
Post-Printing
Cleanup
Cuticle trimmers work great for removing TPU blobs stuck to the printed surfaces.
How I Designed This
Designed in Fusion 360, feel free to download and edit: http://a360.co/2AewbDs -
Cr-10 2020 spool holder 3D Print Model
Summary
a spool holder for the Cr-10, it fita on 2020 bars needs a 2cm (D) PVC pipe. -
LED Light Bracket for Dept 56 House 3D Print Model
Summary
I didn’t like having to run the 120v cords into a bundle for our Department 56 Christmas village. It always seemed like a fire hazard.
I have designed this bracket to replace the original bracket and cord. I plan on attaching small LED lights to this and then wiring all this at 9-12 volts depending on how bright the lights end up being.
Print Settings
Printer:
Maker Select Rafts:
Yes Supports:
Yes Resolution:
.02 Infill:
25% Notes:
I did this with rafts and support, you probably don’t need the support but i did the raft because the wings are so thin. I have not printed without them.
Post-Printing
When I get finished with the project I will add more pictures and links to the material used to finish this out.
How I Designed This
I designed this in tinkercad. -
POT IN THE FORM OF MINION 3D print model 3D Model
POT IN THE FORM OF MINION 3D print modelThe model is fully ready for 3D printingCan be re-scaled to any size depending on your use or 3D Printable area.File format: STL
-
Vent clip cell phone caddy 3D Print Model
Summary
This is an item that I created on Inventor for class.Overview and Background
cell phone holder
This is a holder for a car that attaches to the vent clipl
Lesson Plan and Activity
cell phone holder
I created this for my intro 3d printing class -
Drawers support template – Support tiroirs gabarit – 1U 3D Print Model
Summary
le gabarit pour supporter 1 tiroir.
peut être coller à d’autre pour créer un support à son gout (un support 2×3 est en imagination …) bref faites vous plaisir. -
G27 Clamp screw 3D Print Model
Summary
This is a screw for Workbench3D’s clamp 🙂
To make it easier to print, I’ve separated the model. (and also the thread has been rounded)
Glue them together and replace with broken one :3
I’ve also added STEP file!
You can modify this and make your own designed grip for it :)If you do so, please let me know xD
Note:
Unfortunately, this thing will NOT fits to the original clamp at this time.
Print Settings
Printer:
Geeetech MeCreator 2 Rafts:
No Supports:
No Resolution:
0.05mm Infill:
30-100% Notes:
with PLA, 0.2mm layer height.
The grip doesn’t need so much high infill percentage, but you definitely print the connector and thread with 100% infill. (otherwise, you will broke it pretty easily)
To get better layer adhesion, increase your extruder temperature just a little bit (approximately 5-10 degrees). -
Honor 8 simple case 3D Print Model
Summary
This is just a case for my Honor 8
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 mm or less Infill:
100% -
Jura Capresso Ultima 121 Charging Lever 3D Print Model
Summary
Made for a coworker. Tested and works.
Print on Side
Supports: Yes
Raft: No
0.1-0.2mm Height
3 walls, 100% Infill (Went overkill to give the part the best chance.
You will need a paperclip to glue and snip flush at the end that hooks to the retraciton spring. -
Thrustmaster Wheel Adapter – suit Ferrari 458 Challenge wheel/TX Base 3D Print Model
Summary
Adapter to allow you to fit an aftermarket wheel to the TX Racing Wheel with a Ferrari 458 Challenge wheel as a base. Includes paddle shift extensions and D-Pad extension/replacement
The 458 Challenge wheel has separate buttons and paddle shifters so is ideal to modify. To retain the D-Pad you will need to drill the replacement wheel. I used the adapter as a template then drill/file to suit.
Some hardware required –
Adapter is designed to accept M5 nuts. Wheels typically require M5 countersunk bolts.
Screws into wheel base are not long enough, I used 20mm M4 but you may get away with 15mm?
Paddle shifter extensions will accept M3 nut/bolts, I drilled the original paddles at 3.5mm and countersunk the extensions for flush finish.
Printing –
I printed in PLA at 95% infill to create a solid part. If you have tuned your extrusion 100% may be a better option.
The adapter is designed for the print to be paused, then drop the M5 nuts into the print, then recommence print. This locks the nuts in the print. The fit is deliberately loose to allow easy insertion, if you are quick this can be done without pausing print. I typically put a layer of masking tape on the top of the nuts, this allows the filament to bond to the nut a little better. In any case the print usually recovers in a few layers.
I have tested this for quite some time without issue. Assuming you have good layer bond the adapter should be strong enough.
D-Pad extension brings the D-Pad out flush with the new wheel position. Paddle shifter extension works well with 320mm wheel but I don’t see any issues with slightly larger wheel. -
Crash Bandicoot moneybox 3D Print Model
Summary
Finding a place to keep your coins? Try this crate!!!
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
No Notes:
Known issues: removing supports from the top and bottom is really annoying. Be patient while doing so. I sanded and painted the full crate, especially the bottom, because the surface finish is bad when using supports. -
Lulzbot Taz 4/5 Flexplate Mod 3D Print Model
Summary
This is an addition to my Lulzbot Taz 4/5 Bed Leveler (https://www.thingiverse.com/thing:2625888) which replaces the bed fingers to accommodate the BuildTak FlexPlate system (https://www.buildtak.com/product/buildtak-flexplate-system/). If you have a Lulzbot Taz 4/5 and want a better solution for leveling the bed, I encourage you to take a look at my design. If you are interested in utilizing a FlexPlate system, you will need to mod your printer. What I’ve posted is working great for me. I’m in hopes it can help others.
Print these with 100% infill for maximum durability. -
Monoprice Ultimate 90 Degree Adapter for ribbon cable 3D Print Model
Summary
I installed a flexion extruder on my Monoprice Ultimate and need some additional clearance to I could access the set screw on the flexion. I also decided to turn the ribbon cable 90* sideways so the cable lays parallel to the top of the printer.
Print Settings
Printer Brand:
Wanhao Printer:
Duplicator 6 Rafts:
No Supports:
Yes Resolution:
.18 Infill:
20% Notes:
Print this as it lays in the stl file. I also include my preferred .gcode and Simplify3D .factory files. -
Butterfly Engagement Ring 3D Model
The model is fully ready for 3D printing of plastic wax, metal or jewelry.3D PRINTING PARAMETERSRound Stone – (1.5mm x 32) (1.2mm x 2) (1.8mm x 4)Silver weight – 5.50 grams (Approx)Size – 7 (US)Diameter – 17.5 mmFile format: STL
-
SUPPORT LED 4 3D Print Model
Summary
https://eu.banggood.com/Wholesale-Warehouse-CJMCU-4-Bit-WS2812-5050-RGB-LED-Driver-Development-Board-wp-Eu-984211.html?rmmds=myorder
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.2 Infill:
100 -
1935 prop guard_90-100 microquad_1103-1104 motors _ix2 framekit 3D Print Model
Summary
I’ve just model it base on the original prop guard of the kingkong 100 flyegg framekit . The same dimension & it’s works fine with 1935 prop size ( 1103-104 motors). I’m not sure this thing can easy to print .Hopefully anyone could print or remix it for a good thing . Enjoy -
Suction Cup Shower Hooks 3D Print Model
Summary
I’m using a 45mm suction cup just like these and I take off the hook:https://www.amazon.com/gp/product/B06XGWCCCR/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Capable of holding a lot depending on you “dense” you print the hook.
This was designed to hold my and the wife’s shaving razers in the shower and suction to the tile wall.
Happy Printing!!! -
Opale M3 Trike Lipo holder 3D Print Model
Summary
I have some 3s Lipo that are to big to enter in the Sack of the Max Pilot, This allows for the Lipo to be placed behind the sack.
I had to reverse 4 of the bolts as the ends were touching but it works good.
The Receiver and Mixer are in the sack.
Print Settings
Printer:
XYZ 1.1 Plus Rafts:
No Supports:
Yes Resolution:
.20 Infill:
Min 20% or as I did 90% to make solid
How I Designed This
123D designed
Tell us more… -
FTC 15 Tooth Sprocket 8mm Pitch for Revrobotics Chain fit to Tetrix Hub 3D Print Model
Summary
FTC 15 Tooth Sprocket 8mm Pitch for Revrobotics Chain fit to Tetrix Hub. This part is so that you can use RevRobotics chain with a Tetrix standard kit. -
Chain 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 0,900 gramweight in gold silver 0,600 gram
-
Portrait of Poroshenko 3D Model
Portrait of Poroshenko, only the front side. Vuzializatsiya on CNC machine tools. 3D printer.The size of 100 x164 mmheight 5 mmAvailable formats on request: .c4d, .obj, .fbx, .ma / .mb, .lwo / .lws, .3ds, .3dm, .dxf / .dwg, .stl.Download the 3D model Portrait of Poroshenko .stl, .obj, from VitAnGen
-
Neopixel-Jewelry 3D Model
pendentif à thème Legend of Zelda avec GEMMA M0 et un joyau NeoPixel. Ce collier portatif présente le symbole de Sheikah et brille très bien en faisant un accessoire chic. Les pièces sont imprimées en 3D et s’adaptent ensemble. L’éclairage du pendentif est un joyau NeoPixel qui comporte 7 LED RGB intelligentes. Conduire le NeoPixels est un Adafruit GEMMA M0, qui gère la base de code CircuitPythonFormat : STL
-
Neopixel Jewel 3D Model
Legend of Zelda theme pendant with GEMMA M0 and a NeoPixel jewel. This portable necklace presents the symbol of Sheikah and shines very well by making a chic accessory. The pieces are printed in 3D and fit together. The pendant lighting is a NeoPixel jewel that features 7 intelligent RGB LEDs. Driving the NeoPixels is an Adafruit GEMMA M0, which manages the CircuitPython codebaseFormat: STL
-
Generic Gamepad Wall Mount 3D Print Model
Summary
This is a generic wall mount for my generic/Arctic gamepad.
Print Settings
Printer Brand:
Up! Printer:
Up Plus Rafts:
Yes Supports:
No Resolution:
0.20 -
Molex Cripmer locator 3D Print Model
Summary
I have a 63819-1300 series molex crimper, which is a great tool and does a really good job, but the pin locator that comes with it only fits a few pins. I was surprised to discover that I could 3D print a custom locator and it would work almost as well as the original.
The biggest problem was that the original locator has snap lock arms on it so I had to make mine a bit bigger so it would fit tight enough not to fall out while crimping.
This particular one is for Val-U-Lock terminals.
I’ll post more as I have need for them. -
Drawer Hook for Headphones etc. 3D Print Model
Summary
This hook fits over a drawer pull and is perfect for holding over ear headphones. -
Kururin rolling stick weighted fidget toy tumbler 3D Print Model
Summary
Kururin rolling stick weighted fidget toy tumbler
This Kururin rolling stick is designed to be weighted on the extremes of the fidget toy for improved rolling thumbler toy effect.
Print 100% infill rectilinear
The design will form an interior air chamber without support material and the rolling stick will keep sealed. -
AIO Camera mount for Mini Flamewheel 3D Print Model
Summary
AIO FPV camera mount for FPV camera for a wolfwhoop purchased fromAmazon.com.
Print Settings
Printer:
Anycubic Mini Kossel Rafts:
No Supports:
No Resolution:
.16 Infill:
25% Notes:
Print with mount base on the plate, I used a heated bed @65C but you really don’t need it. The camera from Amazon.com https://www.amazon.com/gp/product/B06X96VPSQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
fits a little tight but it is usable.
This is a work in progress that may never get updated…..errr
EK~ -
Miley 3D Model
miley 3D print modelmiley cyrus printable model197 x 147 x 136 mm fbx stl obj max 3mf file typevertices 3,123,222triangles 1,041,074
