Summary
Tried to match this is close as possible. Hope you enjoy
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Replacement Cover for Anchor-Hocking 2qt Pitcher 3D Print Model
Summary
The pitcher: a 2 quart container with circular 670mm filler opening. Purchased at Target; Made by Anchor-Hocking.
The original cover/lid got destroyed in the dishwasher, so I created a replacement for it.
I used Inland PLA from Micro Center.
No Photos available as of this entry.
Print Settings
Printer Brand:
PowerSpec
Printer:
Duplicator I3 PLUS
Rafts:
No
Supports:
No
Resolution:
0.08mm Layer, 0.8 Shell
Infill:
100%, 4% Overlap, Solid Top & Bottom
Notes:
All pieces oriented for no support, uses built-in skirt of 8laps.
Post-Printing
Construction
Pieces require only minimal cleaning.
Adhesive used: Gorilla Brush&Nozzle Super Glue.
Adhere 2 blocks to main lid body; let set.
Adhere large hinge block to spout cover; let set.
Using section of 1.75mm PLA filament for hinge, slide ‘hinge pin’ through openings, then glue at outer ends to lock in place.
How I Designed This
Designed in Blender.
All parts have been ‘cleaned’ and ‘prepped’ using the Blender Add-on “3D Printing”. -
Case for 10000mAh Xiaomi Powerbank Pro QC3.0 3D Print Model
Summary
only use for 10000mAh Xiaomi Powerbank Pro QC3.0
Print Settings
Printer:
Micromake D1
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20% -
Injustice 2 – Predator Batman Logo 3D Print Model
Summary
Referenced from Injustice 2 Predator Batman’s costume, I modelled this logo.
This could be sharp and dangerous, and not suitable for kids. I prefer it as a wall/door decoration. -
469A001G01 – Hot Plate and stir bar system 3D Print Model
Summary
Designed around an ardiuno Uno and a random motor I found. Takes a standard 200×200 mm heated PCB and insulates it from the stir bar assembly. Code in progress to drive all of it, but wanted to get the solid models available in the interim. -
Clearview Neck mount 3D Print Model
Summary
This is a neck mount for Clearview.
There is a hole for the strap and a battery mount of 3 S – 2200 mAh.
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
Material:PETG -
Threaded star knob 3D Print Model
Summary
Simple remix of this knob to configure how I want it and to add an internal M12 thread in place of the nut catch.
This is designed to be used with my dog hole hold down thing here –
https://www.thingiverse.com/thing:2857409
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%-35%
Notes:
Should be plenty strong enough but add more shells rather than more infill if not. -
Humming Bird 3D Print Model
Summary
I was looking for a simple 3D humming bird design to print – didn’t find one (there were designs out there but they wanted anywhere between $5.00 and $50.00 to download the file). So, I designed one myself – t’s not the most detailed design, but, looks great once it is painted…most importantly, its Free!
Print Settings
Printer:
Sainsmart (ANET A8 Clone)
Rafts:
No
Supports:
No
Resolution:
Various
Notes:
Used various setting – one key take away…slower is better
Also – I’m not a big fan of support structures, so I split the object and printed the two halves separately, and, glued them together.
How I Designed This
Design
I designed this using ‘Paint 3d’ and rendered it usung 3D Builder (both programs came with Windows 10) -
Symbol of scarlet mazoku 3D Print Model
Summary
Recently looked such anime as Konosuba. Then decided to see if there’s something from this anime in Thingiverse. As a result, I was very disappointed by the lack of any work on Konosuba and decided to fix this problem -
CHEVROLET TO NASCAR CAMARO ZL1 IN 2018 3D Model
I created a version of the nascar monster energy camaro. it is set to 1/43 scale and 1/18 since on these scales we can not find the same diecast. it is reproduced without outside only interior. the files accompany axles and wheels. I recommend gluing the wheels on the axle because the pro axle hole in the thumbnail was made so that the axle can rotate. the price and symbolic only to help in the development of new models thanks to all good hugs hugs
-
Eagle ring 3D Model
Eagle ring 3D print modelEagle ring 3d modelthis model created in Zbrush and have polygonal geometry
-
Eagle ring pack 3D Model
Eagle ring 3D print model packEagle ring 3d model packthis model created in Zbrush and have polygonal geometry
-
Eagle ring pack 3D Model
Eagle ring 3D print model packEagle ring 3d model packthis model created in Zbrush and have polygonal geometry
-
Eagle ring 3D Model
Eagle ring 3D print modelEagle ring 3D print modelEagle ring 3d modelthis model created in Zbrush and have polygonal geometry
-
Dustpan 3D Print Model
Summary
I needed something to clean up under my ultimaker 3’s plate after printing, so i created this on tinkercad very easily.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.2
Infill:
solidOverview and Background
Mini Dustpan for cleaning up around your printer
Basic Mini Dustpan for cleaning up your workspace after 3D printing and trimming projects.
Lesson Plan and Activity
Download and go -
E-ZPass Flex Transponder Case 3D Print Model
Summary
This is a simple case for the E-ZPass Flex Transponder. I plan to use this as the base design for other automotive mounts for the transponder, e.g. visor clip mount, rearview mirror mount, etc… For people who don’t want to actually stick one more item on their windshield.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30% -
The M.A.S.S. Device (GI Joe) 3D Print Model
Summary
The M.A.S.S. Device was the plot focus of the Sunbow GI Joe cartoon of 1983. There was a toy released for this but I decided to base this model off of two cartoon images I found online…it looked more impressive. But because of this the model is quite large, roughly 16″ x 10″ and fits in with the rest of the toys in this line. As with the rest of the files I’ve created this model is intended to be printed at 25%. Printing larger or smaller you may have too much or too little detail.
My painted print in the pictures is roughly 4″ x 3.5″ x 4″ tall.
This file is free to download. Please note that it is listed as “non-commercial”. Neither you nor I are allowed to buy or sell physical copies of this 3-D model. You are allowed (and encouraged) to print copies for your own personal use. If you have downloaded this file from a source other than my site on thingiverse.com they have done so without my permission. Thank you for respecting me and the rights of the original copyright holder.
As always, much respect and gratitude to past and present members of our Armed Forces, you are the “Real American Heroes”. Your sacrifice allows people like me to live in peace, freedom and make silly little toys like these.
Tips:
All of these files can be printed without supports. The console_generator is printed with the base down. The beam emitter, element containers (you need 3), and the crystal are all printed pointed up. -
Mosfet Enlosure 3D Print Model
Summary
Got in a Tronxy X5S to X5SA upgrade kit from www.customize3d.biz and it came with a mosfet for the heated bed and while it came with a holder for it I wanted to something a little different. This is designed to bolt to the frame by 2 m4 bolts and T nut I allowed for the screw driver to pass through the side of the box to tight the mounting bolts. I will have a matching enclosure foe the control board once it has been test printed … I have not printed this item yet But I’m sure it will work. the lid should be able to be help on by 2 m3 bolts one from each side. -
CHEVROLET TO RUN CAMARO ZL1 IN 2018 3D Model
I created a version of the nascar monster energy camaro. it is set to 1/43 scale and 1/18 since on these scales we can not find the same diecast. it is reproduced without outside only interior. the files accompany axles and wheels. I recommend gluing the wheels on the axle because the pro axle hole in the thumbnail was made so that the axle can rotate. the price and symbolic only to help in the development of new models thanks to all good hugs hugs.pero no se que hacer. que está configurado para escala 1/43 y 1/18 ya que en esas escalas no podemos encontrar lo mismo en diecast. y se reproduce sin interior sólo exterior. los archivos acompañan ejes y ruedas. recomiendo pegar las ruedas en el eje por el agujero del eje en la miniatura se ha hecho para que el eje pueda girar. el precio y simbolico sólo para ayudar en el desarrollo de nuevos modelos gracias a todos buen provecho abrazos.
-
pen holder / pencil case / knife holder 3D Print Model
Summary
This product is suitable for holding knives and pens and pencils or similar things.
Print Settings
Printer:
ARM
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
20% -
Ballistix Tracer memory FNATIC lightbar 3D Print Model
Summary
Just a custom FNATIC logo to work with the new Ballistix DDR4 Tactical Tracer memory. With this memory you can design your own lightbars to work in conjunction with the RGB lights on the memory, pretty cool!
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Infill:
0% is ideal
Notes:
Obviously need to use translucent material, I would keep walls at 2 layers, no more than that, one looks better but is very fragile obviously. -
Flexi Dog Waste Bag Attachment (no thread remix) 3D Print Model
Summary
As the original cap is hard to screw due to a threaded design I changed that part only so now it closes without much trouble.
Printed at 0.2 resolution for first 60mm and 0.15 for the locking part with the groove. (but should be fine with 0.2 everywhere)
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
Yes
Resolution:
0.2 -
wanhao dial gauge redux 3D Print Model
Summary
I remixed this for my wanhao Di3 as my dial gauge was shorter than the original file so just remixed to lower mount I made I one piece because of im lazy -
Carcassonne Traders and Builders Expansion Tiles 3D Print Model
Summary
Remixed using Solidworks.
These are the extra tiles needed for the Traders and Builders expansion for Carcassonne. (Some of the T&B tiles are identical to those in the base game so they aren’t included in this Thing).
I left out the ribbon/barrel/wheat symbols on the tiles because I think that rule is lame…
If you want to play with that rule, I’d recommend adding simple shapes to the tiles in Tinkercad to represent the symbols.
Print Settings
Notes:
I printed at 85%, this way the game doesn’t spill over every table we play on 🙂
The OG meeples will work with this size but it’s a little tight, I chose to print smaller meeples that make playing easier.
Post-Printing
Prime with black, paint to preference, matte clear coat gives great finish and protection to these pieces . -
GOPRO tripods adapter 3D Model
this model application for gopro tripod adapter.3d model design with catia and made with zbot 3d printer
-
Gopro helmet mounts 3D Model
this model application for Gopro camera install on you’re helmet with sticker.print with Zbot 3D printer
-
Garbage Disposal Stopper Holder 3D Print Model
Summary
This is a holder I designed to store the black plastic stopper that came with our InSinkErator brand garbage disposal in our kitchen sink. The stopper looks like this: http://a.co/ccNfKJo.
Our is mounted inside one of the cabinet doors just below the sink. It’s within easy reach, but out of the way. We rarely use it, so reason to have it out all the time.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% -
Little castle 3D Print Model
Summary
Super quick castle. Made it when I was younger. It just looks kind of cool. Just for the fun of it I am uploading it. -
Anet A8 LED strip mount under X axis clip on remix 3D Print Model
Summary
This remix was remixed in Tinkercad to remove the screws. Assembly is the same, but instead of using screws, you just snap fit the brackets on. No screws needed!
😀 -
Colonial Viper Mk II (Battlestar Galactica) 3D Print Model
Summary
Another patreon model. Just dumping files since the patreon is shutdown. -
Mountain 3D Print Model
Summary
Its a mountain lol -
Maria Statue 3D Model
Mary (Greek: Μαρία, translit. María; Aramaic: ܡܪܝܡ, translit. Mariam; Hebrew: מִרְיָם, translit. Miriam; Arabic: مريم, translit. Maryam), also known by various titles, styles and honorifics, was a 1st-century BC Galilean Jewish woman of Nazareth, and the mother of Jesus, according to the New Testament and the Quran.The gospels of Matthew and Luke in the New Testament and the Quran describe Mary as a virgin (Greek: παρθένος, translit. parthénos) and Christians believe that she conceived her son while a virgin by the Holy Spirit. The miraculous conception took place when she was already betrothed to Joseph and was awaiting the concluding rite of marriage, the formal home-taking ceremony. She married Joseph and accompanied him to Bethlehem, where Jesus was born.I show you the model of the Virgin Mary with high quality. I hope you like this.Thank you so much!. God bless you!
-
Male body 3D Model
male body 4 3D print modelThe model goes as high poly. The model is saved in 3DMax 2015 version, as there is a format OBJ and FBX.HelloI present the model in the 3d editor on photo reference. Exceptionally his view of the anatomy of the male body from his own experience. I hope this model will meet your expectations. I will be glad to help in creating such content.This model does not contain textures. created in the program 3d-coatcreated in the program 3d-coat and in the same place used a smart material of human skin.I work as a 3d artistI have an architectural education and excellent drawing skills.
-
Basic Mod M4 for Ps4 VR aim controller 3D Model
The Basic Mod Has the support function for ps4 control and shoulder support.18 hours of total printing320 gramsthe settings for printing are in the imagesassembly video:https://www.facebook.com/Rafaellaceda/videos/994014337422232/
-
Jesus head pendant 3D Model
Jesus head pendant 3D print modelJesus pendantthis model created in Zbrush and have polygonal geometry
-
Golden ring 3D print model 3D Model
golden ring 3D print model 3D print modelEngagement golden ring 3D print model 3D print model3D Jewelry RingI am the designer also a modeler, I would like to share how to use the 3d Printer to print the design and which way to casting it well.Ring 3D print model.Ring Size: 20 mm (adjustable).Stoneless.format : STL, OBJ, 3DS, ….Available formats upon request: .c4d, .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl.
-
Kennel For Piggeon 3D Print Model
Summary
Wedge basket for the transport of a pigeon. Dimensions 140 x 140 x 350 mm.
It is divided into parts to be able to print on most printers.
Cyanoacrylate has been used to bond the different parts. -
Reprap Guru Prusa Spool Holder 3D Print Model
Summary
I broke the spool holder that came with my printer, and couldn’t find a replacement that was both simple to print, and fit my printer. So I designed this one.
Print Settings
Printer:
Reprap Guru Prusa Clone
Rafts:
No
Resolution:
0.3mm
Infill:
as you wishHow I Designed This
Created using OpenSCAD -
MKS Makerbase V1.3 Case – Remix 3D Print Model
Summary
Remix of https://www.thingiverse.com/thing:2008844
Not perfect – modified in Tinkercad but serves it’s purpose. -
Flagpole topper 3D Print Model
Summary
100mm Orb suitable for the top of a flagpole. The mounting hole is 30mm which just fits the top of the extendable fence post segments from Home Depot. There is room inside for a razor blade, a match, a grain of rice and a penny, just in case.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
n/a -
Boeing X-51 Waverider 3D Print Model
Summary
Took a stab at the X-51. I tried to get it as accurate as I could. There aren’t really any dimensional diagrams out there on the google machine, so I did my best eye-balling it.
Hope you like it!
-Steve -
Case for the smartphone 3D Model
Футляр для смартфона, носить на поясе. пластик, 3D принтер, 3D печатьCase for the smartphone to carry on a belt. plastic, 3D printer, 3D press
-
Blinds lift pulley 3D Print Model
Summary
I was shortening some window blinds, when one of the little pulley wheels got lost. I measured one of the other wheels and modeled it in Fusion 360.
Print Settings
Printer:
Monoprice Select Mini
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100 -
Modern quartz clock with magnetic mounts 3D Print Model
Summary
This clock has the logo for the company I work for incorporated into the clock face.
The clock movement can be purchased here :https://www.amazon.com/gp/product/B00N639EUU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The magnets are 12mm round by 3mm deep, also bought on Amazon.
Designed using Fusion 360.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
20%
Notes:
Hatchbox silver PLA for the out ring, face is black APLA sanded post print for the mat finish. -
Magnetic Shoelaces 3D Print Model
Summary
I made these because I don’t lie tieing my shoes in the morning if anything I leave them tied and slip in and out of them. These are designed with a curve so they lay nicely against your foot. I print them at 50% infill for strength and at the medium quality setting for me that is 0.20 layer hight. I use three magnets on each side for max strength that is a total of six per foot and 12 total. As far as I know, these do not set off metal detectors, I have gone through one wearing them and it did not set it off.
I use 10x5mm Neodymium Magnet you can get 100 for $26.99 on eBay shipped from inside the US. -
Iphone 6/6s Flexible phone case – Superman 3D Print Model
Summary
Remix of my remix of the phone case by Snickerpleez. This is a very protective phone case designed to be printed in flexible filament. It turned out great. Fits very nice and looks great. I printed it with .8mm borders and 20% infill. Supports are required for some of the overhangs, but not much was needed.
Print Settings
Printer:
Rigidbot 2
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20% -
Peg Board Tool holder 3D Print Model
Summary
I made these to hold all manner of things on my pegboards, from paint brushes to razor blades. The hexagon pattern is the cut down on material costs and it just looks cool. The ones in the photos were printed at low quality but high infill for strength. They fit very securely on the pegboard, it takes a little force to get them on but they are solid once they are. -
Young woman head 3D Model
High Poly Girl Head.Measure units are meters, it is about 15 cm in heigtht. Model is print ready.Mesh is manifold, has no bad contiguous edges, and no loose parts.================================================Model is available in two versions:1) Girl_Head_II-01 (The model consists of 783768 triangle faces)2) Girl_Head_II-02 (The model consists of 39188 triangle faces)================================================Available formats: .blend, .fbx, .stl, .obj, .dae, .3ds.
-
Bennett Linkage 3D Print Model
Summary
This is my first iteration of a 3d printable model of the bennet linkage.
The Bennet linkage is an overconstrained mechanism, which consists of four links connected by four revolute joints.
My objetive is to make a pre assebled 3d printable model for generating complex deployable structures. I´m with too much projects so i encorage you to take this as starting point to explore this interesting theme. I uploaded an igs version of the files for easy modifications.
Esta es mi primera iteración sobre un modelo imprimible en 3d del mecanismo de Bennett.
Se trata de un mecanismo de cuatro barras y cuatro vínculos de libre giro. Sus relaciones permiten que se depliegue formando un plano y se pliegue agrupando todas las barras en forma paralela.
Mi objetivo es hacer un modelo pre-ensamblado que facilmente permita la genereacín de estructuras plegables complejas. Publico mi comienzo por si alguien le interesa explorar este interesante tema y aportar a la causa común para la evolución del modelo.
References
“Design of Structural mechanism” Autor: Yan Chen
Video (working linkage in grasshopper) https://vimeo.com/3305915
Print Settings
Printer:
Chimak 3D
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
Small and easy print!
Print as the “stl” indicates, no support.
In order to achive a complete Bennett linkage you must print one pair of “bennettt1” and one pair of “bennettt2”.
Assemble the hinges with a piece of 1.75 filament, melt the edges to fix position of the axle. -
Batgirl Mask 3D Print Model
Summary
A modified version of the Batman Justice League 3000 mask made for a costume party. It fitted my male friend alright. The model has been split into separate pieces for easier printing and less need for support. There is a small weird thing in the edge of the eyes, but not noticeable when printed.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
0.15How I Designed This
Blender
I used simple bool operations in blender to reshape the justice league mask. -
Mustafa Kemal Ataturk 3D printable portrait 3D Model
3D printable portrait of Mustafa Kemal Atatürk.File pack info:-OBJ file-STL files. One stl welded solid 120 mm height, and one 120 mm height stl file hollow with 1.1 mm shell and 10 mm hole at the bottom.Browse my profile to find many more historical, political and celebrity models. Contact me if you need custom work.Part of Ataturks fascinating bio (Wikipedia):Turkish women received equal civil and political rights during Atatürk’s presidency ahead of many Western countries. In particular, women were given voting rights in local elections by Act no. 1580 on 3 April 1930 and a few years later, in 1934, full universal suffrage, earlier than most other countries in the world.He was hero of battle of Gallipoli during WW1. Following the Empire’s defeat and subsequent dissolution, he led the Turkish National Movement, which resisted against the mainland Turkey’s partition among the victorious Allied powers. Establishing a provisional government in present-day Turkish capital Ankara, he defeated the forces sent by the Allies, thus emerging victorious from what was later referred to as the Turkish War of Independence. He subsequently proceeded to abolish the decrepit Ottoman Empire and proclaimed the foundation of the Turkish Republic in its place.As the president of the newly formed Turkish Republic, Atatürk initiated a rigorous program of political, economic, and cultural reforms with the ultimate aim of building a modern, progressive, and secular nation-state. He made primary education free and compulsory, opening thousands of new schools all over the country. He also introduced the Latin-based Turkish alphabet, replacing the old Ottoman Turkish alphabet.
