cane lion 3D
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
EOD Challenge Coin Display 3D Print Model
Summary
Remake of my other coin display. This one has the EOD Master Badge. -
ER250 Front Plate Stock Replacement 3D Print Model
Summary
This is a replacement part for the Eachine 250 Racer front plate.
It has a larger camera port.
I’m waiting on a printed copy .. I like Nylon best so far has a nice finish. -
keurig Hack 3D Print Model
Summary
Keurig hack. inspired by the keurig freedom key.
you can tape a purple post it note on one side with masking tape to unlock special menu.
Note that if you print with PLA it might be soften by the heat. recommend to use ABS for this. -
Flûte 3D Print Model
Réalisation Flûte “pérou” en pla
impression en position debout pour préserver la partie biseau .
soufflez en formant un Te à l’opposé des marques MK (biseaux à l’opposé de la bouche) . -
Fully printable Monster Truck 3D Print Model
Fully printable monster truck with four link suspension and four wheel drive and steering with three differentials. I wanted a monster truck that actually looks like a monster truck, and not a truggy with large wheels.
-
Headset or headphone holder 3D Print Model
Summary
easy to print, Small and strong holder.Headphone/headset holder for drawer or screen
Print Settings
Printer:
pursa i3 Rafts:
Doesn’t Matter Supports:
No Infill:
20 -
Digital caliper holder for 3D printer bed leveling 3D Print Model
Summary
This tool is designed to hold digital caliper for bed leveling. I made it to avoid constant pain with bed leveling which involves eye-balling and playing with Feeler Gauges.
Intended use algorithm:
1) Level bed manually — make sure you heated the bed first (temperature will temper readings). Make sure to heat your printer but not caliper.
2) Measure distance above each leveling knob
3) Next time you need to level a bed just use this tool to adjust knobs
Parts:
It assumes use of magnets to attach to rails and ensure there will be no fidgeting: “Magnets 6x3mm”
I used a caliper like this “Clockwise Tools DIGR-0105 Electronic Digital Indicator Gage Gauge Inch/Metric Conversion 0-1 Inch/25.4 mm with Back Lug Auto Off”
Post-Printing
It’s recommended to glue digital caliper to holder to make sure readings will be consistent. -
Raspberry Pi 1B Case – no screws 3D Print Model
Summary
Remixed from 0110-M-P’s excellent original design. I was going for style more than functionality, and removed the addtional port openings and screw holes. It’s designed to snap together, but probably isn’t sturdy enough to just toss in a bag and still stay connected.
Second photo shows a comparison between 0110-M-P’s original design on the left, and my remix on the right.
TinkerCAD links, in case anyone wants to see my atrocious editing job (might be useful for extracting the “logo” for your own design):
Top: https://www.tinkercad.com/things/9NS4N4xiAHE
Bottom: https://www.tinkercad.com/things/9ZxpVprNRZ3
Print Settings
Printer Brand:
SeeMeCNC Printer:
Rostock MAX v2 Rafts:
No Supports:
No Resolution:
.1 Infill:
20% -
wallmounted flowerpot 3D Print Model
Summary
Printed easily without support.
Remixed from my own regular pots.
I hang them on the wall with sugru. works perfectly. I guess that drilling a keyhole should work as well for hanging with skrews. -
Cable Chain Adapter for Tronxy P802E – Axis X 3D Print Model
Summary
A simple remix from Cable Chain Adapter for Prusa i3 (Hictop) -
Curly hair 3D Model
curly hair 3D print model
High poly curly hair.
File contains one mesh object.
Real world scale was used, It is about 19 cm hight.
Render in cycles and openGL(screen shots)
native format is .blend
poly count: 440470 -
Demon ring 3D Model
demon ring 2 3D print model
Demon ring.
File contains one mesh object.
diameter 2.25 cm
poly count : 918420
From horn to chin approximately 3.3 cm
Native format is .blend.
render in cycles and openGL(screenshots)
About wall thickness : all walls are thicker than 0.3 mm. In some areas, fangs and horns for example, there can be thickness 0.4 mm or less. Before purchasing Make sure that your printer can handle this or that you now how to optimize wall thickness. -
Rook 3D Print Model
A Rook chess piece/ castle-themed tower intended for 3d printing. It’s specifications are perfect for Shapeways.
-
The IT Crowd – Block Art 3D Print Model
Here is something that I made just for fun 🙂 ; The IT Crowd (UK-Version) is a comedy sitcom by Channel 4.
-
Low Poly Man 3D Print Model
I am from Taiwan’s “Pumpkin teacher”, following these examples is to allow children to learn this simple design software Blender materials faster. These examples include basic model, lighting, texturing and rendering. Let children be able to get started easily but happy learning that is the purpose of my teaching.
-
Diamond perfect_brillant_cut 3D Print Model
Hello, this is a perfect brillant cut for diamond & other stones. You can use it with the actualy perfect diamons shader V2 from ShadowCameron http://www.blendswap.com/blends/view/77949
-
The Stanford Dragon 3D Print Model
The Stanford Dragon is now available as a manifold mesh in a ready to use .blend!
-
Destiny Ghost 3DPrinting setup 3D Print Model
Ok I finally finished this model is in separate parts when you put them together you will have movable ghost from Destiny. Print And Have Fun 😉
-
Transformer for 3D printing 3D Print Model
This fan made Transformer, Autobot Burnout, is able to be 3D printed out and transformed.
-
Sketchfast 6 Zombie 3D Print Model
This was my entry for Sketchfast 6 (72 hours time for sculptingsomething with sculptfab)
-
Plunderbuss Pete 3D Print Model
Yarr, it be Plunderbuss Pete! A Blender version of a 3d printable pirate sculpture. This model of mine is now in the public domain, so feel free to remix, print, use in animations as a prop, etc.
-
Printable case for Paspberry Pi v.1.0 3D Print Model
Well, it’s my first attempt at making a printable 3D model.
-
Hairy Gyro with 3 moving rings 3D Print Model
It took a while when i first saw the featured hary lion to get my idea of a hairy gyro. I designed this in onshape and printed it in 4 1/2 hours. Have fun with it.
-
DIBUJO EN 3D YODA (STAR WARS) 3D Print Model
4 dibujo en 3D,en esta ocasión he elegido a YEDI (STAR WARS)
-
CubeX Part Cooling Fan – Front Mounted 3D Print Model
Summary
This is a part cooling fan for the CubeX and possibly Cube Pro 3D (not verified) printers. It uses a centrifugal blower (see specs below). The blower spacing is for using extruders 1 and 3. Remember to print two ducts. I will eventually upload a plenum for a 1-2, 2-3, and 1-2-3 option. Constructive feedback is appreciated.
These files are a work in progress. I prefer to have all my parts snap together without fasteners, but the plenum will need to be glued in place for now until I finalize the design.
Fan
Delta Electronics
BFB0512H-R00 (12V)https://www.digikey.com/products/en?keywords=BFB0512H-R00
BFB0524H-R00 (24V)https://www.digikey.com/products/en?keywords=BFB0524H-R00
Flow: 3.9cfm @0.709in H20
Noise: 38dB
Size: 51mm x 51.3mm x 15mm
Hardware
Socket Head Machine Screws M3 x 0.5 mm, 6 mm Long (quantity 2)https://www.mcmaster.com/#91292a111/=17i1kxt
Glue
Loctite Professional Liquid Super Gluehttp://www.loctiteproducts.com/p/sg_bottle_pro/overview/Loctite-Super-Glue-Liquid-Professional.htm
Print Settings
Supports:
No Resolution:
0.2mm Infill:
20% Notes:
Use PETG or ABS.
The models print easily with no supports.
The ducts require a raft so that they don’t get knocked over. If you flip them around the other way, the overhang is too extreme for PETG (on my printer at least).
Post-Printing
Assembly
1) Clean prints of stringing, blogs, and check internals for blockage.
2) Glue the plenum to the bracket with super glue. I use tape to align and secure it until the glue dries.
3) Snap in the two ducts.The ducts snap into place as long as your printer is well calibrated.
4) Screw the assembly onto the front of the carriage using the two outside screw holes where the OEM fan attaches.
5) Slide in the fan wires through the slot and snap fan into place. The blue wire is not used.
6) Connect power to your preferred source on your control board, or build a fused circuit directly from the power supply. Make sure you get the correct voltage fan for your 3d printer. -
HYmini Wind Charger Impeller Blade 3D Print Model
Summary
This is a replacement impeller for the HYmini wind charger. Printed in ABS. Sixth and Seventh versions included. Designed by me. It’s pretty fragile so print it denser / solid. Does not need supports. Printed on Anet A8. -
Quad Spinner 3D Print Model
Summary
This is a Fidget Spinner I created in Fusion 360. Works with five 608ZZ 8mm X 22mm X 7mm bearings. Also includes center caps as separate file. Hope you enjoy, let me know what you think!
Print Settings
Printer Brand:
Printrbot Printer:
Printrbot Simple Metal Resolution:
.15mm Infill:
80% -
A6 Semi-circular Fan (Improved) 3D Print Model
Summary
This is an improvement to my previous Anet A6 Adjustable Fan. I have made this version for the Anet A6 in light of the results from testing by 3D Maker Noob. See his video at https://www.youtube.com/watch?v=vedP3jhMpy4&t=15s
I made the adjustable part smaller since several people complained that it was very hard to fit and adjust. This one is truly adjustable.
Print Settings
Printer:
Anet_A6 Rafts:
No Supports:
No Resolution:
.1 Layer height .4 nozzle Infill:
20% -
Mini twisted Pot – Petit Pot Design 3D Print Model
A modified design from my previous variation (https://cults3d.com/en/users/Julien_DaCosta). A mini flower pot very easy to print so you can use very rude settings to save time.
-
Fantasy combs ocean – Peignes fantaisie océan 3D Print Model
The amazing shark comb from faberdasher (http://www.thingiverse.com/thing:384599) felt very lonely, so I made him a little family ! The family will possibly expand in the future…
-
Dibujo en 3D WOLF (LOBO) 3D Print Model
3 dibujo en 3D,en esta ocasión he elegido una imagen de un lobo
-
fenêtre miniature 3D Print Model
fenêtre miniature pour décoration originale dans un jardin ou une chambre d’enfant
-
Soporte de escritorio para Smartwach No1 D5 adaptado para muelle de carga 3D Print Model
Adquirí este reloj y me incomodaba mucho el ponerlo a cargar apoyándolo sobre su pantalla. Así que decidí diseñar este soporte.
-
Anet A8 adjustment for Y-axis and printer leveling 3D Print Model
Summary
I’ve had the problem the floor on which the table for the printer stood wasn’t leveled. Which led to corners at the z-axis which haven’t had 90°. The same happened at the y-axis, because the threaded bars are bent.
If you just have a problem with a bend y-axis:Parts List:
Wooden board
10x screws for wood 3×12
1x M3x30
2x washer for M3
1x nut for M3
Angle profile length ~240mm
First cut the angle profile in two parts of ~62mm length and two parts of ~50mm length.
Drill in every part two holes and screw the ~62mm parts at the front of the housings and the ~50mm parts at the sides.
Print the STL, put the M3 screw with the washers and the nut in the small hole and screw it onto the wooden board near the side of the frontplate of the y-axis. Use the M3 screw to adjust the y-axis.
If you also have problems that your printer isn’t levelled perfect horizontally:
Parts List:
4x screwable case legs
Drill 4 holes in the corners of the wooden board by following the manual of the case legs. Use a water bubble to level the board.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 Infill:
100% -
Camera stand Ricoh Theta 3D Print Model
Summary
Próximamente medidas de tubos y tornillería.
Print Settings
Printer:
Prusa B3D Rafts:
No Supports:
Yes Resolution:
0.3 Infill:
30% -
Cup Holder Wire Manager 3D Print Model
Summary
i was no balls’ed on reddit to post this 😀 -
l118 light gun 3D Print Model
model l118 light gun . artillery of British Army . moldel l119 light gun .
modelo light gun 118 . otto melara.. -
3D Printing Guardian – Wall Mounted Filament Spool Holder 3D Print Model
Disguised as a wall mounted spool holder 3D Printing Guardian watches over the whole 3D printing process. He immediately made our lives easier as now we can replace a spool in seconds. It is especially handy when changing filament for multicolor 3D printing. The idea was to design something functional but with an interesting theme to it. That’s how our 3D Printing Guardian was born.https://youtu.be/LfZMXJ2vlbchttp://3dwithus.com/3d-printing-guardian-spool-holder
-
Dibujo 3D Son Goku (BOLA DE DRAGÓN) 3D Print Model
2 dibujo en 3D,en esta ocasión he elegido uno de Son Goku de bola de dragón
-
Brackets to join 25×25 mm wooden stakes to create a garden frame 3D Print Model
Summary
I made these brackets to build a framework from 25 x 25 mm wooden stakes for bird netting to protect my raised strawberry garden. It has proven to be very robust (over engineered one might say!) and the bird netting simply drapes over the frame from being attached to an adjacent fence. Because my stakes were a little under size I have drilled each bracket and screwed through the bracket into the stake to give it rigidity.
I enabled supports for the several parts that required bridging of significant area but my printer overrode that and printed quite satisfactorily just as if supports had not been enabled.
Sliced with Slic3r and printed at .3mm layers since surface finish was not a priority.
Print Settings
Printer:
FLSUN i3 clone Rafts:
No Supports:
Doesn’t Matter Resolution:
.3 mm Infill:
25% -
Thatched Home 4-Piece 3D Print Model
Summary
This is a small thatched house for 28mm play. It comes with 4 pieces that can be snapped together. It is purposely made of 4 components. This allows the gamer to have the home and then remove the walls or roof when entered. The walls outside have a detailed rough wood look. The floor is quite a detailed design over which the wall can be placed and then a roof. The door can be slid in and out of the opening. The roof is best done by using rafts which if possible should only be used for the lower portion to allow the lid feature to fit into the walls. The thatched roof is quite detailed with straw texturing. I just noticed that in the picture with everything assembled, I didn’t snap the walls into the floor. It fits snugger than the picture shows.
Print Settings
Printer Brand:
PowerSpec Printer:
Ultra 3D Rafts:
Yes Supports:
No Resolution:
0.2 Infill:
15% -
Orange Pi (OPi) Zero Minimalized Case 3D Print Model
Summary
Since Orange Pi Zeros have an overheating issue (mine does), I figured I’d make a minimalized ‘open air’ tall case with a 25mm 5v DC fan mount to blow directly at the core processor.
Notes:
I included the original Sketchup file with an outline (on the top and bottom) showing where I think an alternate location for another fan mount may be. This file also includes the measurements I used (after making the top portion) to make the bottom, just in case anyone wants to redo the bottom.
The design uses 3mm screws/bolts.
The holes on the ‘towers’ are deliberately undersized (a bit) to help create a good thread when attached to the top.
It can be bolted from the top or bottom – change the hole sizes if needed.
The fan mount is for a generic 25mm fan, but I specifically use the 2510S 5V DC fan attached to pins 4 and 6 (on the OPi Zero pinout). -
Creampuff camera mount 30 degree 3D Print Model
Summary
Creampuff camera mount. 30 degree recline. 20mm x 20mm mounting holes. Equipped with antenna mounts w/ 3mm holes. Also, a holder is added at the rear for a 9mm x 5.5mm buzzer.
Print in TPE/TPU.
Print Settings
Supports:
Doesn’t Matter -
Pichet 3D Print Model
Réalisation d’un pichet en 3 parties ou monobloc ,la partie socle peut servir de support bougie, la partiecoupelle assemblée avec la partie socle peut servir de petite coupe , l’ensemble remontée avec les 3 parties donne un pichet a boisson ou vase pour 1 fleur ou brins de muguet. l’ensemble des pièces s’emboitent et peuvent être collées avec une simple colle tuyau PVC..
.la partie monobloc génère des parties en pentes trop importantes qui nécessitent de nombreux supports à enlever,
donc moins facile que l’impression en 3 parties avec aucun supports. -
Pendant Twisted 3D Print Model
Pendant with wonderful design.
Ready for 3D printing.
For a perfect gift !
Enjoy! 🙂 -
Anet A2 Mainboard Cover MKS Mosfet 3D Print Model
Summary
This is a Mainboardcover for Stock Anet A2 Mainboard with mounts for MKS Mosfet.
Print Settings
Printer:
Anet A2 Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% -
Chipcard for “Autoscooter/Autoskooter/Autodrom” 3D Print Model
Summary
After much searching around I have accidentally found an old chip coin for the autodrom and I thought to myself who would not like to drive for free. So I just made a chip card which comes after the dimensions of the original chip. For the chip card you have to use a support structure. Otherwise, there is nothing to consider.
I do not take any responsibility if someone is caught or caused harm!
Have fun printing;) -
SKELETOR 3D Print Model
This is an experimental structure created by my friend Daniel Castillo and myself. It’s initial purpose was to be an architectural structure for an open space, but it kind of looks like a helmet or the skeleton of some kind of alien armadillo.
-
Voronoi Beverage Coasters 3D Print Model
These are 4 fun coasters made with a random voronoi pattern. They are different from each other, as a different ‘seed’ was used for the random pattern on each one.
-
Dragon Old School 3D Print Model
Made with Maya for my modeling class. Tell me what you think and print away!
-
Hedgehog with spikes (hairy print) 3D Print Model
This Hedgehog will print without support matterial, with spikes that feel like bristles an look like actual spikes!
-
TronXY P802E Y-Axis Cable Chain Remix 3D Print Model
Summary
I saw a number of chains for various frames for the TronXYs but none that fit for the P802E specifically. After printing a couple that didn’t quite fit properly, i ended up remixing the designs of two other chains. This fits properly and doesn’t fray your bed cable.
Print Settings
Printer:
TronXY P802E Rafts:
No Supports:
No Resolution:
0.2 Infill:
30% -
Nuka Cola from Fallout 4 3D Print Model
Summary
This is a not-so-accurate model of a Nuka Cola bottle from Fallout 4. Not watertight, work in progress, the label part goes through, and there is a big hole in the model. Just saying, not watertight in the least, so don’t try.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
? Infill:
? Notes:
? -
LM8LUU File down bearing 3D Print Model
Summary
I remixed this bearing because some people have problems printing exact sizes, the bearing I made should fit off the printer, but with only 5 access points you can easily hand file the inner diameter with a small file if you need to. I recommend using PLA, on a smooth rod this bearing should last for many years be for it gets enough slop to be noticeable.
Print Settings
Rafts:
Yes Supports:
No -
Extruder Cable Support 3D Print Model
Summary
This is 3d printer part for support the cables of extruder and hot end.
Print Settings
Printer:
Graber Pro Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% Notes:
Printed with ABS Premium -
Bowden tube strain relief used on extruder motor 1.75mm 3D Print Model
Summary
I created this to relieve the strain on the bowden tube pneumatic connector on the extruder motor for 1.75mm filaments. It has been tested and is working great. This should pretty much fit all pneumatic connectors with 10mm diameters from face to face on the flat sides and can be used on the extruder motor or the effector end.
Print Settings
Printer:
FLSUN Delta Supports:
Yes Resolution:
.2 mm Infill:
30% -
3D Printed Underwater Camera Vehicle 3D Print Model
This is an ideal vehicle for all underwater needs. It can be used to help anglers identify the best sites for casting, it can be used to survey the condition of harbours, canals etc, it can be used to look for treasure or lost items. The list is as endless as your imagination.
