RG0003 – Engagement ring BLIZZARD 3D print model
Size – 17.5 mm.
Weight (gold 14k) – 6.30 gramm.
Gemstone:
1 round – 3.2 mm;
6 round – 1.2 mm.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Engagement ring BLIZZARD 3D Model
-
Wedding rings LAUREL 3D Model
RG0001 – Wedding rings LAUREL 3D print model
Bridal set – Wedding rings LAUREL
Ring 1:
ring size – 21.4 mm.
weight (gold 14k) – 5.2 gramm.
gemstone – 1 round – 2.5 mm.
Ring 2:
ring size – 16.0 mm.
weight (gold 14k) – 2.68 gramm.
gemstone – 1 round – 2.0 mm. -
poignée bouton commode armoire sdb bricolage 3D Print Model
model simple
pour vis m3 à m4
trou conique -
Angled adaptor for Oculus Rift sensor camera 3D Print Model
Summary
This adaptor screws onto a standard photography tripod, or onto the original rift sensor stand. It is designed to give the sensor more downwards coverage, for when the sensor is positioned in a high corner.
I implemented a “kink” or offset in an attempt to keep the correct center of gravity, but in retrospect, it really wouldn’t have mattered – the sensors are quite light-weight.
See this for good roomscale setup tips:https://www.oculus.com/blog/oculus-roomscale-tips-for-setting-up-a-killer-vr-room/
I use this app to visualise and tweak the sensor placement/coverage from within VR:https://www.wearvr.com/apps/desk-scene-check-your-camera-bounds -
Open Alpha Headphones Bass Adjustable Ear Cups 3D Print Model
Summary
This is a remix of the Open Alpha headpones given to the diy community by MrSpeakers Dan Clark. He designed the original as a production product. Later on he gifted the design to the community. My remix replaces the vent holes on the original with an adjustable vent. Just thread an M3 set screw into the hole on top and adjust them as desired. This is basically the same as his Alpha Prime design. I would start with M3x12 it can totally seal the vent and also leave it completely open, though a little of the screw will be sticking out the top of the cups when the vent is totally open. If you want to go totally open or close to it maybe an M3x10 or M3x8 would be a better choice. The .iges file is included for editing and remixing.
Print Settings
Printer:
Custom Rafts:
Yes Supports:
Doesn’t Matter Resolution:
0.1mm Infill:
10% Notes:
You may need to make walls around the cups or use a raft/skirt to prevent curling. Experiment with wall thickness, infill pattern and density to see how well they isolate. Please report any comparisons in sonic properties that you discover if you print multiple patterns/densities.
How I Designed This
Autodesk Fusion 360 -
Flying Maker Coin 3D Print Model
Summary
My Maker’s Coin is a flying one!
Print Settings
Printer:
Tronxy X3 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
30% Notes:
nozzle 0.4mm
PLA
bed temp: ambient
filament temp: 200 °C first layer, other layers 195 °CCustom Section
-
Unknown Creatures – Cerberus Skeleton 3D Print Model
“In Greek mythology, Cerberus , often called the “hound of Hades”, is the monstrous multi-headed dog that guards the gates of the Underworld to prevent the dead from leaving. Cerberus was the offspring of the monsters Echidna and Typhon, and usually is described as having three heads, a serpent for a tail, and snakes protruding from parts of his body. Cerberus is primarily known for his capture by Heracles, one of Heracles’ twelve labours.”
-
Nintendo Switch Charging Stand 3D Print Model
These are affiliate links, using them helps keep our builds free!
-
Macbook Pro Connector Hub 3D Print Model
Summary
After reviewing the available parts on Thingiverse (of which there are many!) for laptop connector hubs, I decided to create a custom part for my own cables. The hardware this part is designed for is the Macbook Pro 15 inch retina (mid 2014). Ports included are: power supply, both Thunderbolt ports, USB, and headphone jack. I used a micrometer to measure the size of my current apple power supply terminal, and designed all cable terminal-hub interfaces to have a -0.2 mm fit (hub is smaller than cable terminal housing). USB and Thunderbolt terminal housings vary quite a bit in all dimensions, so there is a chance this may not fit your specific connectors.
Part is available at: https://cad.onshape.com/documents/a196b600e6f6e8c0ad7bfc9e/w/2082e1db4c7cc63f5996dca5/e/627410629d75fce8e1e79e2c
To change width and height of each connector’s housing interface, modify the bottom dimensions of sketch 1. Extrude 1-4 determine the housing depth. Enjoy!
Print Settings
Printer Brand:
Formlabs Printer:
Formlabs Form 2 Rafts:
Doesn’t Matter Supports:
No Resolution:
.1 mm Infill:
100% Notes:
Resin used for this print was the Formlabs Tough v2. Parts printed with this resin tend to be a bit more flexible than I like, if your cable terminals aren’t snug enough I would recommend shrinking the hub interfaces with Autodesk Meshmixer or like .STL editing program. -
Monster Kossel Mixed Frame 3D Print Model
Summary
These are the frame parts I modified from the original Kossel frame to work with the 2040 tower extrusions for a larger size.
The carriages are designed to snugly fit on the 20mm side when using original v-roller wheels from openbuilds.
The motor frames could use an additional tweak to allow for easier mounting of the NEMA 17 steppers in place, but that will be an upcoming edit. I increased the height of the bottom frame bits to get a more rigid feel between the tower and bottom frame.
Print Settings
Printer Brand:
RepRap Printer:
RepRap Kossel Rafts:
No Supports:
No Resolution:
0.2 Infill:
25-30% Notes:
Select infill to taste based on the strength needed. I found that 30% was more than sufficient to handle the requirements for the 1m tall extrusions.
How I Designed This
I imported the files in Blender, imported the Openbeam 1515 and OpenBuilds 2040 profiles to use a boolean operation around them. I then slightly scaled the extrusion size to give enough tolerance to print such that the extrusions will fit. -
Prusa i3 MK2 Y carriage printable bed 3D Print Model
Summary
This is a fully printable Y carriage plate for mounting your heated bed. I adapted the Prusa i3 MK2 dxf file and modified it so that you can bolt on the arms in order to make this a fully printed part rather than having to rely on cutting one out of wood or having one laser cut or machined for you. It is 10mm thick, and the legs go in the slots only one direction each so that you cant mix them up and they use 3mm screws to bolt down. I printed mine with cubic infill to give it some additional rigidity, but it’s a very solid piece once it’s complete.
I adapted this version to use 4 lm8uu bearings instead of the 3 that are called for in the plans. However if you want to modify it back to a 3 bearing design, i’m including the sketchup file itself for your reference. I may improve this design by making it a little thinner so it’s lighter. it comes in at about 159 grams. You can print this on a standard 200mm square build plate.
I also added additional 3mm holes for extra zip ties or screws for the bearings. Some of you like to use blocks so I gave plenty of options to tie them all down however you see fit.
May come back and add some lm8uu bearing brackets in the future if there is interes.
Print Settings
Printer:
Wilson II reprap mjrice Rafts:
No Supports:
No Resolution:
.25 Infill:
30% Notes:
I printed this with .25mm layer height (since it’s a large unseen part, you dont need to do fine details on this) and a .5mm nozzle on my Wilson II printer. I used a top/bottom thickness of 1.5mm and a wall thickness of 2mm, but this is way overkill. you can use a 1mm thickness all around to speed up print time. as is, i printed it in about 8.5 hours.
Setting to 1mm wall/top/bottom thickness it drops to about 6.5 hour print at 60mm/sec.
Post-Printing
use 8x m3x12 cap head or pan screws with nuts on the other side to attach the legs to the body. Legs mate to their slots in only one direction flush and tight. -
Eachine Wizard X220 POD 3D Print Model
Summary
Remix of spaceone pod. Not pretty, and haven’t even tested to see if this fits or not. Made to replace top section of drone. The battery will have to be bottom mounted. Havent figured this one out yet. Work in Progress -
The Royal Game Of UR Kit 3D Print Model
Summary
This is my reproduction version of the olddest playable known boardgame.
https://en.wikipedia.org/wiki/Royal_Game_of_Ur -
White Wall Tires – MMT 3D Print Model
These are alternative tires for the Mini Monster Truck. A classic white wall tire with a domed rim cap.
-
Caterpillar Wheel – MMT 3D Print Model
These are alternative tires for the Mini Monster Truck. A rugged tire similar to those found on construction equipment.
-
Airless Wheels – MMT 3D Print Model
These are alternative tires for the Mini Monster Truck. Incoroporating the look of those futuristic airless tires. Doesn’t actually function like an actuall airless tire, unless it was printed with ninjaflex maybe.
-
Extra Chunky Wheels – MMT 3D Print Model
These are alternative tires for the Mini Monster Truck. Just something silly.
-
Catapult 3D Print Model
Summary
A Catapult
Print each part once (1x Catapult_Lever, 1x Stand_1, 1x Stand_2)
You may need to rotate the models
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
No Resolution:
0.1 Infill:
15% -
Realacc Martian III – Go Pro/ Top Plate 3D Print Model
Summary
This top plate can replace or be added as an addition to the Realacc Martian III x200/220/250 quadcopter frame. The GoPro holder is designed to accomodate a GoPro HD Hero 3.
There is space underneath the GoPro mount to attach a velco band for securing the GoPro to the quadcopter.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.05mm Infill:
20% Notes:
I haven’t tried printing this with anything except PLA. Results may vary depending on material chosen. -
Smooth Widget Spinner 3D Print Model
Summary
A fidget Spinner that uses 3 1/2 in hex nuts in the sides and one 608ZZ ball bearing in the middle. Except this one, unlike http://www.thingiverse.com/thing:2300929, is smooth. If you know how to use OpenSCAD then you can make this yourself, if not, there are instructions but I thought I’d save some people the time. -
Bed Latch for Sindoh 3DWOX 3D Print Model
Summary
Here is my attempt at a better latch , I printed it in ABS with brim
Use at your own risk and be careful that bed gets hot
Print Settings
Printer:
Sindoh 3DWOX Rafts:
No Supports:
Yes Resolution:
.2 Infill:
33% -
Switcherang: Nintendo Switch Joy-Con Grip 3D Print Model
This is a Joy-Con grip for the Nintendo Switch to use in tabletop mode. They provide an ergonomic all-around grip for your hands, fit in a travel case, and are a decently quick print (~2 hours).
-
IKEA GALANT roll-front cabinet (replacement door stop) 3D Print Model
Summary
Love these IKEA GALANT roll-front cabinets. But the plastic stop is too delicate. Make your own replacement part! -
Slicon Heated Bed Use an AC SSR 3D Print Model
Summary
Heated Bed e.g.
Use an AC SSR, not a DC SSR, they look very similar.
Look Teardown SSR Videos.
DC to DC SSR Good Idea… But…Dangerous…Many Electronics Breaks in a moment. -
Paint filter support for SLA printers 3D Print Model
Summary
Paint filter support for SLA printers (Formlabs Form 2, …)
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
200 microns -
General Purpose Holder 3D Print Model
Summary
This is a general purpose holder.
Scale it down, and it will hold your phone/tablet.
Make it larger and use it as a decorative plate holder.
Go nuts! (hahaha :D)
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.2 – 0.4 Infill:
30% – 50% Notes:
It should be fairly easy to print with any printer… -
Mother’s Day Heart-Shaped Business Card Holder 3D Print Model
Summary
I made this for Mother’s Day. It’s a three part heart-shaped holder that your mother will love. It will hold her business cards, 4 pens/pencils, and small paperclips or tacks in the front pocket. -
Customized Clinton Band Spinner Caps 3D Print Model
Summary
This is a remixed spinner cap I made for my children who are members of the Clinton School Band. Edited in tinkercad.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Yes Supports:
No Resolution:
1mm Infill:
100% Notes:
Printed at 200/50 with 1mm layer height, 100% infill. Fan speed 20% -
Steven Universe Aquamarine Keychain 3D Print Model
Summary
This is a keychain of the latest character from Steven Universe Aquamarine. The size is a little large (9.43 in.) and i’d recommend tuning it to 2.5 in for best results. This is my first build, so I apologize if its not up to your standards, but enjoy! -
Custom Die (Dice) 3D Print Model
Summary
Make your own custom dice for games.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Infill:
45 Notes:
I used infill of 45% to get the target weight of 5 grams for a 16mm die. -
Babyhawk Soft Motor Mounts 3D Print Model
Summary
The 1mm soft mount is good for TPU and the 1.5mm soft mount is good for ninja flex.
Print Settings
Printer:
HicTop Rafts:
No Supports:
No Resolution:
.2 Infill:
N/A Notes:
Works best with a .4mm nozzle. -
T-rex Pendant 3D print model 3D Model
T-rex Pendant 3D print model
For those who enjoy this amazing creatures!
Default dimensions: Width – 20.82mm
Depth – 19.42mm
Height – 3.04mm
(but feel free to scale it as you wish)
Watertight model
File formats: OBJ, STL, PLY
Polygon Count: Merged Model : 100k tris
Splited Models : 200K tris
Any kind of issue, specific file format or advice feel free for contact me! -
Jedi token 3D Print Model
I made this jedi token to be used in board games. I recommend scale it to 1/2. Enjoy!
-
Hollow Jedi token 3D Print Model
I made this hollow jedi token to be used in board games. I recommend scale it to 1/2. Enjoy!
-
Ring with gems 3D Model
Size – 17.19 mm diameter
18K Gold – 4.37gr
Gems:
1 – 4.00 mm
2 – 2.45 mm
2 – 2.15 mm
2 – 1.90 mm -
Earrings with Turquoise and gemstones 3D Model
18K Gold – 5.67gr
Turquoises: 16 – 2.00mm
Gems:
2 – 2.90mm
16 – 1.60mm -
Bicolor ring with gems 3D Model
Size – 17.56 mm diameter
18K Gold – 6.79gr
Gems:
1 – 5.30 x 3.31 mm
12 – 1.00mm -
Bicolor ring with gems 3D Model
Size – 17.83 mm diameter
18K Gold – 9.26gr
Gems:
1 – 2.40mm
4 – 2.10mm -
Ring with gems 3D Model
Size – 16.87 mm diameter
18K Gold – 2.90gr
Gems:
1 – 4.20
2 – 2.20
2 – 2.10
2 – 2.00
2 – 1.90
2 – 1.80 -
Universal Phone Wall Mount 3D Print Model
Summary
This Wall Mount should fit to every Phone, i designed it for my Huawei P8 Lite. -
APC UPS Battery Divider (for SMART UPS battery modules) 3D Print Model
Summary
This is an incredibly simple design that replaces the battery divider in larger APC UPS battery banks. The full battery module is comprised of several smaller lead acid batteries, each battery is seperated by one of these small dividers to keep the batteries from touching each other. This is handy when batteries start expanding.
The APC battery modules come with these preinstalled, but they are easily broken when removing swollen batteries from a defective module. Hence why I’m uploading this design.
APC modules that use these are usually in the Smart UPS series (4000, 5000, 6000, etc)
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.2 Infill:
100 Notes:
Part is only 2mm thick and I recommend making it a solid piece. -
Hinge for different heights 3D Print Model
Summary
I made this hinge, cause I had two different layer heights to connect. -
Raspberry Pi Holder Folgertech FT-5 Pi Cam 2020 Frame Octoprint 3D Print Model
Summary
Raspberry Pi Holder for Folgertech FT-5 with Pi Cam.
For 2020 Alu Profile, Octoprint.
With place for 12V to 5V Step Down and and holes for cable managment. -
Modifier Fun 3D Print Model
Just played around with the modifiers and this is the result, I think it’s 3D-printable.
-
Micro Quad fpv Racer 100mm Brushless 1S 0703 20.000kv 3D Print Model
Here is a mini racer 100mm made of polycarbonate equipped with brushless 0703 1S version 20.000kv.
-
Woop 105mm Indestructible TPU 1103 7800kv 3S 3D Print Model
Here is a mini quad turbine in TPU with 1103 brushless motors that accepts the 3S with the propellers 4 blades and 2S with the 5 blades.
The chassis and the lipo door are in TPU Ultimaker and the top plate in Polycarbonate or ABS to rigidify the whole.
It takes 20% filling for the frame with 230 ° on a carpet at 70 ° at a speed of 30mm / s. -
Feather 3D Model
Low poly feather.
File contains one mesh object.
Used units are meters. Length is about 24cm.
faces: 126587
Native format is .blend. -
shift linkage bushing – 2009 pt cruiser 3D Print Model
Summary
I’ve gone through a couple linkage bushings for my PT cruiser, so I decided to start printing them to save time and money. Feel free to remix, this is currently the functional version I’m utilizing and “driving on” with 🙂
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator Rafts:
No Supports:
No Resolution:
.3mm Infill:
15% Notes:
currently ABS -
Nerf Target with stand 3D Print Model
Summary
This was made from the “Nerf Target” by stumphopper (http://www.thingiverse.com/thing:149606). I added a base to hold the revolving target. I added some length to the pegs of the target to have more room to move freely. I made the peg holes bigger to allow the target to move when hit (it was to tight). Also, i thickened the “Y” stand and added more length to the part where the holes are to avoid breaking when inserting the target in the “Y” stand and when the target moved.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
Yes Supports:
Yes Resolution:
0.2 Infill:
25% -
Scotch Tape Dispenser Insert 3D Print Model
Summary
This is an insert to go inside standard office rolls of Scotch tape, to adapt them to the most common dispensers.
It isn’t really a swastika, as you’ll see if you look closely at the end. The spiral arms give springiness, and I was too lazy to implement this in a non-square geometry.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
100 micron Infill:
N/A Notes:
I printed this at 100 micron resolution in PLA. It took about 40 minutes on my machine.
For best results, print it with the spindle vertical so that it turns smoothly in the dispenser. You’ll need supports switched on. With slic3r’s default settings it’s easy to tear off the spindle while separating the raft. I tried with “honeycomb” and just 1 raft layer between the support and the body. That worked fine and separated easily. -
Yoshi 3D Print Model
Summary
I found the model online and posed it up in Blender. I hope you enjoy!
Print Settings
Printer:
Einstart-S Rafts:
Doesn’t Matter Supports:
Yes Notes:
Print with full supports. -
Diver Meeple 3D Print Model
Summary
You will probably want to increase the thickness of the diver, depending upon what size you need. My divers needed to fit in a mint tin, and thus were short but thick. Bigger meeples could be tall and proportionally thinner. Experiment! -
Eachine Wizard 220 gopro mount 25deg 3D Print Model
Summary
simple quick design for a gopro mount for the eachine wizard x220.
I based the bolt spacing on Brandoncook’s design, its a very similar design, but made from scratch.
not printed or tested yet,
suggest ABS or TPU/TPE, at least 50% infill, better 100% for strength!)
Supports probably needed for the strap hole. -
Modular Imperial Sector Building 3D Print Model
Summary
Ey! I took BiancaW’s great model and ‘sliced’ it to make it printable by my Prusa I3. Besides that, my project is provide them with magnets and have multiple terrain configurations. Soooo… Just go for it!!! -
microscope foot 3D Print Model
Summary
foot for microscope. Need a dimameter 4mm bolt to be screwed.
2 models. 1 for flat head bolt / 1 for hexa head bolt -
FLUX Delta Lid Lifts 3D Print Model
Summary
Lid lifts for the FLUX Delta printer so that the original lid can be used with an off-board filament spool.
Also allows accessory mounts such as the FLUX9001 & FLUX9002 & FLUX9003 and FLUX9004 to hang off the printer lip and not interfere with the lid.
Print Settings
Printer:
FLUX Delta Rafts:
No Supports:
Yes Resolution:
Low Infill:
20% Notes:
Note that only the left and right lifts need to be printed with support. Also note that those mounts are not symmetrical, and the left must be mirrored to get the right.
All the parts will press-fit into place. Some minor cleanup may be needed, especially around the support. -
ocular protection for microscope 3D Print Model
Summary
an ocular protection for microscope or other obervatory material.
Use Flex wire.
Diameter 28mm but with the freecad file you can easily modify it. -
Little birdbath printable 3D Model
Little birdbath model, was maded in Blender and checked for errors in 3D Builder. Three polycount versions included.
-
Bench05 Printable 3D Model
Bench 3D print model
Bench model, was maded in Blender and checked for errors in 3D Builder. Two versions included – assembled and dismantled. -
Heart amulet 3D Model
Heart amulet, was maded in Blender and checked for errors in 3D Builder. Three polycount versions included.
-
Hyena 3D Model
Lowpoly hyena, was maded in Blender and checked for errors in 3D Builder. Three polycount versions included.
-
Classic mobius strip 3D Model
M?bius strip, was maded in Blender and checked for errors in 3D Builder. Two polycount versions included.
