3DHunt.co

Category: 3D Print Models

Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.

  • Flash Hider Barrel Attachment v6 3D Print Model

    Flash Hider Barrel Attachment v6 3D Print Model

    Summary
    Flash Hider Barrel Attachment v6
    Why we no longer sell it: took a long time to print and a lot of bed space.

  • Flash Hider Barrel Attachment v10 (The Blunderbuss) 3D Print Model

    Flash Hider Barrel Attachment v10 (The Blunderbuss) 3D Print Model

    Summary
    Flash Hider Barrel Attachment v10 (The Blunderbuss)
    Why we no longer sell this: Seriously? Look at it, its huge!

  • Tevo Tarantula bracket 3D Print Model

    Tevo Tarantula bracket 3D Print Model

    Summary
    This bracket is to attach the left side of the Tarantula frame to a Lack table or other surface.
    It attaches to the frame using 5 x M4 8mm screws and M4 T-nuts. 3 screws are then used to secure it to the surface.
    Right hand bracket to come……

  • Flash Hider Barrel Attachment v11 3D Print Model

    Flash Hider Barrel Attachment v11 3D Print Model

    Summary
    Flash Hider Barrel Attachment v11
    Why we no longer sell it: Took way to long to print

  • [WIP] 3d printing filament spool holder 3D Print Model

    [WIP] 3d printing filament spool holder 3D Print Model

    Summary
    A very much Work-In-Progress 3D printing filament spool holder. Quickly put together after my printed spool holder failed me and a big Inland spool came crashing on my OctoPi. Turned out to be much more durable and convenient than I expected!
    Fits 67ish millimeters spools
    Design to be cut out of cardboard

  • Chess 3D Print Model

    Chess 3D Print Model

    king-queen-bishop-knight-rook-pawn

  • bilboquet 3D Print Model

    bilboquet 3D Print Model

    A bilboquet with ties to pass the string.
    I had not played it for years and it works.
    The two pieces (the ball and the handle) are separated in 2 files

  • Photo frame 3D Print Model

    Photo frame 3D Print Model

    An easel about 18 cm high The easel is adjustable thanks to an impression of a single block.
    To highlight photos or postcards for your decor.

  • Airbrush support 3D Print Model

    Airbrush support 3D Print Model

    Airbrush stand

  • HAIRY ROBOTICA (REMIX) 3D Print Model

    HAIRY ROBOTICA (REMIX) 3D Print Model

    WITH PLA (GLOW IN THE DARK) OR NINJAFLEX (BLACK)
    HAIR DREAD STYLE TO GLUE ON

  • N Scale concept constructions for train layout 3D Print Model

    N Scale concept constructions for train layout 3D Print Model

    Summary
    Here some constructions to use in N scale layout

  • Phone dock for baby’s foldable bed 3D Print Model

    Phone dock for baby’s foldable bed 3D Print Model

    Summary
    When you are on the go with you baby, you probably use a foldable bed.
    However, you probably don’t bring your baby cam along with you…
    At least, I don’t.
    I designed this thing to fit on our baby’s foldable bed. It allows me to use a smarphone as baby cam
    (you can, for instance, use the app https://alfred.camera/ )
    The thing contains the Freecad file, so you can adjust it to your own bed.
    It also contains 2 stl:
    1 part: is the full thing
    2 parts: is the thing divided into 2 chunks. Thanks to this trick, you don’t need any support for printing it.
    However, you need to glue the 2 parts.

  • Xiaomi Yi Home (ants cam) Go Pro mount – Printer cam 3D Print Model

    Xiaomi Yi Home (ants cam) Go Pro mount – Printer cam 3D Print Model

    Summary
    I wasn’t happy with the my old solution for a printer cam. https://www.thingiverse.com/thing:2296449 It was pointed down more as a first layer cam so when I printed larger objects I couldn’t see what was happening past around the 60mm mark.
    I found the box my SJ Cam came in and it had loads of adaptors and interconnects and realised I could put them to good use.
    This is fully adjustable on all axis. The bit that attaches to the frame is from the suction cup holder, I just broke off the suction cup bit (shown in the photos).

  • Headsethalterung MK1 3D Print Model

    Headsethalterung MK1 3D Print Model

    Summary
    passend für:https://www.amazon.de/gp/product/B018UGLKZE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

  • Pivot bushing for cub cadet rzt-50 3D Print Model

    Pivot bushing for cub cadet rzt-50 3D Print Model

    Summary
    I lost the pivot bushing out of the front axle of my rzt-50 from cub cadet. It’s a tight fit, but works
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Resolution:
    .3 Infill:
    100 Notes:
    printed 100 percent infill for strength

  • Filament Drive Block for Extruder MK7 Plus3 3D Model

    Filament Drive Block for Extruder MK7 Plus3 3D Model

    Filament Drive Block for Extruder MK7 Plus+3

  • Clamp to absolute uselessness 3D Print Model

    Clamp to absolute uselessness 3D Print Model

    Trial under Fusion 360, with the sole purpose of testing this software. Cleaning the clips may be tricky, but the assembly is functional. You will need to print: – 2x Clip – 1x Screw – 1x Handle – 1x Ring1 – 1x Ring2 – 4x Connecting rod1 – 4x Connecting rod2 CAD files Fusion360 available at http://a360.co/2pKUgvJ

  • Soap dish 3D Print Model

    Soap dish 3D Print Model

    Soap dish made of Fusion360

  • Cross of the Carpenter – Puzzle 3D Print Model

    Cross of the Carpenter – Puzzle 3D Print Model

    Puzzle “The Cross of the Carpenter”.

  • Ballon ASM – Champion of France !! 3D Print Model

    Ballon ASM – Champion of France !! 3D Print Model

    I was forced 🙂

  • Shelter of Pier HO 3D Print Model

    Shelter of Pier HO 3D Print Model

    A quay shelter HO scale, integrable in a train decree has to scale HO

  • Star Wars Tie Fighter 3D Print Model

    Star Wars Tie Fighter 3D Print Model

    Summary
    Created as closely to scale as possible with precise measurements used. Based primarily off the design used in Star Wars Rebels.
    Print Settings
    Printer:
    Davinci Jr.

  • DE-10 3D Print Model

    DE-10 3D Print Model

    Summary
    The DE-10 blaster pistol was a model of blaster pistol that saw use in the galaxy during the Galactic Civil War. Its heaviest users in the period were members of the Death Watch, a Mandalorian splinter group based on the Forest Moon of Endor at the time. When a spacer infiltrated the Death Watch bunker, their main base on the moon, sometime after the Battle of Yavin, the sentient discovered a schematic for the weapon along with specialized barrels used in its construction. The spacer eventually had one of the weapons created for personal use.
    If anyone can please break this up into a full size replica I’d be so appreciative.
    Credit goes to MCDLabs on ShareCG for making this model.

  • Unfinished Catamaran (double hull) 3D Print Model

    Unfinished Catamaran (double hull) 3D Print Model

    Summary
    Just for fun, scale up or down to desired size. unfinished.

  • Bimini Hinge Saddle 3D Print Model

    Bimini Hinge Saddle 3D Print Model

    Summary
    This saddle sits between some boat bimini brackets/hinges and the top edge of the side windshield. It allows an interface between the flat bottom of the bracket/hinge with the curved surface of the windshield. I made this to replace a damaged one from my early 90s Sea Ray. It may fit other models.

  • “FATHER’S DAY” Special Mens Band 3D CAD File In STL Format 3D Print Model

    “FATHER’S DAY” Special Mens Band 3D CAD File In STL Format 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • “DAD” Special Men’s Band 3D CAD Model 3D Print Model

    “DAD” Special Men’s Band 3D CAD Model 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • PS Vita game stand 3D Print Model

    PS Vita game stand 3D Print Model

    Http://www.thingiverse.com/thing:2061152
    Playstation Vita Game Case Display Stand by BadServo is licensed under the Creative Commons – Attribution license.http://creativecommons.org/licenses/by/3.0/

  • RC car track curbs 3D Print Model

    RC car track curbs 3D Print Model

    Interlocking curbs for RC car tracks. I made if for my backyard track. There are three different radiuses. I suggest tent plugs to hold in place for off road tracks.

  • Lee Pro 1000 Reloading Press Case Slider 3D Print Model

    Lee Pro 1000 Reloading Press Case Slider 3D Print Model

    Summary
    This is a case slider for a Lee Pro 1000 reloading press. I designed this to replace the one on my press that got damaged. The gap for the shell has been sized to match a 9 X 19 shell, but may need some adjustment. The hole where the guide rod fits still needs to be drilled out. I have included the123 D Design file to allow for tweeking

  • Senseo pad holder cleaner 3D Print Model

    Senseo pad holder cleaner 3D Print Model

    Summary
    Simply fill with vinegar and place the pad holder on it

  • 64mm Magnetic Carriages 3D Print Model

    64mm Magnetic Carriages 3D Print Model

    Summary
    This is a remix of Hayden’s 2020 carriage. I like his idea because makes the carriage very light and has the advantage of fine belt tensioning.
    The differences are:
    64mm rod spacing to work with the 64mm 3xPiezo Magnetic Effector here https://www.thingiverse.com/thing:2361081
    and 3mm holes for M3 bolts to work with Delrin V-Wheels from http://www.think3dprint3d.com and 20mm wide extrusions from Motedis Profile 20 I-Type slot 5 http://www.motedis.co.uk/shop/Slot-profiles/Profile-20-I-Type-slot-5:::999991_99999133.html or Misumi http://uk.misumi-ec.com/vona2/detail/110302684350/?HissuCode=HFS5-2040-%5B50-4000%2F0.5%5D&PNSearch=HFS5-2040-%5B50-4000%2F0.5%5D&KWSearch=HFS5-2040&Keyword=HFS5-2040&searchFlow=results2products&Keyword=HFS5-2040
    They have the same wheel spacing so can also work with extrusions and 15mm diameter V-wheels from OpenBuilds or RobotDigg.com if you modify the hole size. I’ve attached CAD files for this. If you need other formats please let me know.
    Per carriage, you will need:
    3x Delrin V-wheels from www.think3dprint3d.com
    2x 10mm ball studs from Haydn http://www.MagBallArms.com
    3x M3x30 bolts.
    10x M5 nylock nuts
    6x M3 washers
    2x M3x35 hex bolts for the belt tightener.
    2x M3 nuts for the belt tightener.
    1x M3x40 hex bolt for preloading the carriage wheels.
    1x M3x20 hex bolt for the vertical post for the lower G2 belt attachment.
    1x M3x15 bolt for upper belt attachment
    1x M2.5×12 hex for fine end stop tunning
    9x M3x4mm spacers http://www.ebay.co.uk/itm/142378241665
    The spacers are to be placed between the bearings in each wheel. That helps a lot with wheel alignment.
    Between every wheel and the carriage, there is one nylock nut and two washers. Is best to fit them first and measure all three with a caliper before you fit the wheels. This way you know all three wheels, when fitted, will be the same distance from the carriage. Nylock nuts can differ by as much as .4mm.
    My Kossel is built with Robogigg metal corners and I’ve twisted the belt to run over the idler pulleys. They run very smooth this way.
    Cable ties should not be necessary if part “b” and “c” are precisely printed.
    Some of Robodigg f623zz bearings started being noisy after 6h of use so I’ve replaced them with some EZO made in Japan.
    Enjoy!

  • LCD Smart controler stand 3D Print Model

    LCD Smart controler stand 3D Print Model

    Summary
    Full Graphic Smart controler stand fot the Allted’s case

  • Epson Moverio BT300 Eyeglasses Mask 3D Print Model

    Epson Moverio BT300 Eyeglasses Mask 3D Print Model

    This mask that is suitable for Epson Moverio BT300 video glasses is used to insulate the view for immersive use.
    It has an easily movable shutter.

  • WhatsApp Kiss 3D Print Model

    WhatsApp Kiss 3D Print Model

    Just for fun.
    0.25mm gap. Heart should not need gap, so you will need a bit of glue.
    (I’m not related to WhatsApp in any way)

  • Holder for Black & Decker RT650KA 3D Print Model

    Holder for Black & Decker RT650KA 3D Print Model

    This is a work in progress.
    I use the Black and Decker RT650KA *.
    04/01/2016 Improved parts for the front fixing (threaded part pitch2_3-A / B)
    You can use it both horizontal and vertical.
    You will need:

  • ZOWI FEET IN PARTS 3D Print Model

    ZOWI FEET IN PARTS 3D Print Model

    Zowi is a little robot from BQ (http://zowi.bq.com/que-es-zowi/) which is derived from BOB (http://www.thingiverse.com/thing:43708).
    After Zowi broke the foot, I redrew the foot and divided it into 3 parts, so you can print just the broken part.
    Video: https://youtu.be/XbNczGihgMg

  • Moverio BT300 DJI mavic pro and Spark pad mount 3D Print Model

    Moverio BT300 DJI mavic pro and Spark pad mount 3D Print Model

    Here are two models of brackets for attaching the Epson Moverio video lens pad to the DJI Mavic pro or Spark DJI remote control clamps.

  • Trigorilla MOSFET mount for 2020 extrusion 3D Print Model

    Trigorilla MOSFET mount for 2020 extrusion 3D Print Model

    Summary
    I made this to mount a Trigorilla MOSFET on my reworked Folgertech i3. Should be suitable for any 2020 extrusion.

  • SC8UU mount for 2020 extrusion 3D Print Model

    SC8UU mount for 2020 extrusion 3D Print Model

    Summary
    I’ve built a larger than usual i3 style printer, and made the y carriage from leftover 2020 extrusions from the old smaller frame.
    This part mounts SC8UU bearings to the bottom of said 2020. The fit is pretty loose to avoid distorting a Drylin bearing. Carefully tightening with an M3 screw / nylock will secure them well.

  • Attaches Store Velux 1982 3D Print Model

    Attaches Store Velux 1982 3D Print Model

    Summary
    Attaches Store Velux 1982

  • Dial_Backing – Dial Backing for UM1 with 8mm shafts 3D Print Model

    Summary
    UM1 has 8mm shafts rather than 6mm that UM2/3 uses.
    I have re-engineering the part with wider slots and added an offset mould for whom have a longer extruder.

  • Exclusive 3D Jewelry CAD Design Of Heart Ring 3D Print Model

    Exclusive 3D Jewelry CAD Design Of Heart Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Beautiful Engagement Ring 3D CAD Model In STL Format 3D Print Model

    Beautiful Engagement Ring 3D CAD Model In STL Format 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Plant Castle 3D Print Model

    Plant Castle 3D Print Model

    plant castle plant pot

  • Alien coffee machine 3D Print Model

    Alien coffee machine 3D Print Model

    Alien mouth designed to sit on Bosch Tassimo.
    It is here mounted on the TAS4000 model.
    I have not yet tested it on other models, but there are several similar models it would most likely fit on to.

  • 20mm Advanced Test Cube 3D Print Model

    20mm Advanced Test Cube 3D Print Model

    Summary
    Advansed 20mm test cube
    I create this model for PLA test
    Print Settings
    Rafts:
    No Supports:
    No Resolution:
    0.08-0.15

  • Dual extruder calibration stl 3D Print Model

    Dual extruder calibration stl 3D Print Model

    Summary
    Helpfull to choose offset X and Y in the printer setting for double extruder printing.
    I use it for raise3d N2 Dual +
    After 6 printing – i moved offset X & Y step by step. The calibration was good for bigger printing.
    Print Settings
    Printer:
    Raise3D N2 dual plus Rafts:
    Yes Supports:
    No Resolution:
    0.15 Infill:
    30% rectilinear
    Post-Printing

    How I Designed This
    Tinkercad.com
    Dual calibration .stl made with tinkercad.com

  • NELO rudder cover 3D Print Model

    NELO rudder cover 3D Print Model

    Summary
    This replaces the original NELO rudder cover. No need to, but I plan to put a GoPro connector on this later.
    Printing:
    I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
    Post-print:
    To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
    Print Settings
    Printer:
    Zonestar 802P Rafts:
    No Resolution:
    0.2 Infill:
    20-30% will do. Notes:
    I don’t remember if I had to print this at 102% or similar to reach proper size, so you will have to test 😉
    Post-Printing
    To fit, this needs to be bent a little. Just heat it with a hairdryer and slightly bend by hand so it has the required curve.
    How I Designed This
    I used 123d designer. File included. Improve if you need, but don’t sell commercially!

  • LM27 Enders water tap replacement 3D Print Model

    LM27 Enders water tap replacement 3D Print Model

    Summary
    I created this thing as a replacement for the water tap handle that broke on our LM27 ship.
    Print Settings
    Printer:
    Geeetech i3 Pro C Rafts:
    No Supports:
    No Resolution:
    0,1 Infill:
    60 Notes:
    I sanded and wiped it with acetone after printing for smooth surface.

  • Key Cube 3D Print Model

    Key Cube 3D Print Model

    Summary
    Part generated from object seen in youtube video, unknown source.
    Print Settings
    Printer Brand:
    LulzBot Printer:
    Mini Rafts:
    No Supports:
    No Resolution:
    0.25 mm Infill:
    20% Notes:
    Printed using 3 mm PLA
    Shell thickness: 1.0 mm
    Print speed: 50 mm/s
    Printed at 100% scale
    Post-Printing
    Minimal filing of finished parts.

  • Fan adapter Free 3D Model

    Fan adapter Free 3D Model

    70×70 to 80×80 fan adapter.Chassis fan to cpu fan adapter.To reduce noise mount a chassis fan in the cpu and connect it to 5v instead of 12v.

  • Dragon Boat 3D Print Model

    Dragon Boat 3D Print Model

    A dragon boat is a human-powered watercraft. They were traditionally made in the Pearl River Delta region of China’s southern Guangdong Province out of teak wood to various designs and sizes.

  • Cool bee 3D Print Model

    Cool bee 3D Print Model

    Some cool bee 🙂

  • LED Holder (PRUSA I3 MK2) 3D Print Model

    LED Holder (PRUSA I3 MK2) 3D Print Model

    LED light holder for Prusa I3 MK2. The opening is 19x19mm and I used an LED rail like this from ebay.
    The original filament holder can still be mounted and dismounted while the light is in place.

  • Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Summary
    previously I created a set of X-ends for the Monoprice Maker Select v2 to replace the stock metal ones because I wanted a way to use standard LM8UU bearings for the z-axis. Those have been installed on my printer for the last couple of months, but I figured I’d try making a set of bearing holders in case any of you want to use different bearings, but are happy with the metal x-ends that your printer came with.
    These seem to work pretty well. Just screw them in from the bottom, slide the bearing into place, and you should be good to go.
    I printed these in ABS with 4 perimeters and 40% infill, but the walls are pretty thin so you could probably do them 100% infill and it wouldn’t make much difference in print time.

  • Screw 3D Print Model

    Screw 3D Print Model

    Summary
    This is a screw I invented in 30 minutes. I does use supports.
    Print Settings
    Rafts:
    Doesn’t Matter Supports:
    Yes Resolution:
    40 Infill:
    65%

  • BLTouch/3DTouch rear sensor mount 3D Print Model

    BLTouch/3DTouch rear sensor mount 3D Print Model

    Summary
    This is a remix of https://www.thingiverse.com/thing:2219963 to allow mounting a BLTouch sensor on the rear bearing of an Anet A8. I’ve included the customizer to allow the height
    and many other features to be custom set for any printer . The “Measured Height” parameter is used to calculate the correct height with the 8.3mm offset to the nozzle. You simply need to move the print nozzle so that it touches the bed then measure the distance of top mount screw hole (on the rear lower bearing) to the bed. Enter this in the “measured height” field and create. The mount also includes side clearance to allow it to work on new Anet A8’s. Please note that for this mount, you need a mount to bed distance of at least 52mm or it won’t work.
    Stock carriage settings:
    define X_PROBE_OFFSET_FROM_EXTRUDER 20
    define Y_PROBE_OFFSET_FROM_EXTRUDER 61
    define FRONT_PROBE_BED_POSITION 61

  • Dragon Boat / 龍舟 — (86Duino Original) 3D Print Model

    Dragon Boat / 龍舟 — (86Duino Original) 3D Print Model

    Summary
    龍舟（或稱龍船）是指漢字文化圈的龍形舟，也是中國和琉球端午節競賽活動時使用的人力船隻。
    龍舟競渡流傳最廣的起源是，楚國人為紀念投江自盡的屈原，借龍舟驅散江中之魚，期望阻止魚吃掉屈原的身體。
    龍舟不單是傳統中華文化的一部分，從其引伸發展出來的龍舟競賽現已發展為體育活動。由於賽龍舟被推廣成為體育項目，因此龍舟同時成為此體育項目的主要用品。
    A dragon boat is a human-powered watercraft. They were traditionally made in the Pearl River Delta region of China’s southern Guangdong Province out of teak wood to various designs and sizes.
    For more printing object please visit 86Duino facebook and give us a “like” and thanks for the tips…https://www.facebook.com/86duino
    喜歡圖檔的好朋友請記得到 86Duino Filament 3D 列印 / 耗材 – 不正經研究中心 粉絲團給我們按讚哦 https://www.facebook.com/86duino
    Post-Printing

  • BMW Wallet and Key Holder tray 3D Model

    BMW Wallet and Key Holder tray 3D Model

    BMW Wallet and Key Holder tray

  • Wheel rc Car 1:8 scale 3D Print Model

    I have printed 4 pieces for my friend who needed a new wheel set…..It working good!!!

  • Gladius functional 3D Print Model

    Gladius functional 3D Print Model

    Model of gladius: Mainz
    total length: 52cm
    blade lenght: 39cm
    blade thickness: 0.5cm
    blade engravment 1: IMPERATOR • CAESAR • MARCVS • AVRELIVS • ANTONINVS • AVGVSTVS • ARMENIACVS • MEDICVS • PARTHICVS • MAXIMVS • GERMANICVS • SARMATICVS Blade engravement 2: VLTIMA RATIO
    4 parts: 1) blade 2) pommel bottom 3) handle 4) pommel top

  • Spacelamp 3D Print Model

    Spacelamp 3D Print Model

    this is my own spacelamp 🙂

  • 40mm_fan_cover_set 3D Print Model

    40mm_fan_cover_set 3D Print Model

    just a 40mm fan cover set…..

  • GUN SHOOTS RUBBERBAND 3D Print Model

    GUN SHOOTS RUBBERBAND 3D Print Model

    THIS GUN SHOOT 3 RUBBERBANDS, I USE A FLASHFORGE FINDER 3D PRINTER. THIS GUN TAKE OVER 9 HOURS TO BILD, IN NORMAL SPEED. AND PLUSS 2 OTHER ITEMS NEEDS TO PRINT. AND IF YOU WANT IT IN BETTER DETAILS, THEN IT WILL TAKE LOONGER TIME.

  • JBL Flip 3 Stand 3D Print Model

    JBL Flip 3 Stand 3D Print Model

    Summary
    This litte thing will stop your JBL Flip 3 from rolling away!
    Print Settings
    Printer:
    Anet A8 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.2-0.3 Infill:
    10%

  • Megatron – Transformers G1 3D Print Model

    Megatron – Transformers G1 3D Print Model

    Summary
    G1 Megatron leader of the Decepticons. Modeled in sketchup for fun & practice. Print/share/enjoy.

  • Anet A8 – X Axis Frame – Stabilizing Rod 3D Print Model

    Anet A8 – X Axis Frame – Stabilizing Rod 3D Print Model

    Summary
    This is stabilizing rod for the main frame of the Anet A8.
    Print both parts. put them together and install them as one rod.
    The diameter of the outer holes are 8mm (M8 screws).
    Print Settings
    Printer:
    Anet A8 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.2 Infill:
    20% Notes:
    Use Brim
    How I Designed This
    Autocad 2017, I share the DWG File if you want

  • Electronics Project Box 3D Print Model

    Electronics Project Box 3D Print Model

    Summary
    Designed a 18650 project box. (box?) Not sure what to call it…anyway, could be used to make cool electronics projects. I made a subscriber counter using an ESP8266…see video….
    Proto Board: http://tinyurl.com/ydxndswz
    Rocker Switches: http://tinyurl.com/yd6sd3yv
    18650 Battery Holder: http://tinyurl.com/y7ysblvs
    Nylon Bolt & Nuts Assortment: http://tinyurl.com/y7k8q2am
    M3 bolts(40mm): http://tinyurl.com/y7u2d99p
    Print Settings
    Printer Brand:
    PrintrBot Printer:
    Play Rafts:
    No Supports:
    No Resolution:
    .4mm Infill:
    20 ish Notes:
    flip the bottom piece over….so no overhang.
    Post-Printing

  • Cancer Stl Model 3D Model

    Cancer Stl Model 3D Model

    Stl model of cancer grabbing the cells.Cells made as elements can be devided from cancer model.

  • Penis sex toy 3D Model

    Penis sex toy 3D Model

    tsplines model can be opened with meshmixerBuilt to real-world scale.Exported formats: stl, obj, fbx,Formatos: . .obj, .fbx, .ma/.mb, .lwo/.lws, .3ds, .3dm, .dxf/.dwg, .stl – Available upon request.

  • DoubleTwistVase1 3D Print Model

    DoubleTwistVase1 3D Print Model

    This vase printed in a little over 33 1/4 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec. Developing the shape was surprisingly simple, so I made this blog page explaining the method I used: http://birkbinnard.com/blog/do-the-twist/

  • Spinner Collection 3D Print Model

    Spinner Collection 3D Print Model

    Here you can find a collection of my spinners.

  • Bottle opener Ping Pong TTR 1200 – 1500 3D Print Model

    Bottle opener Ping Pong TTR 1200 – 1500 3D Print Model

    I play ping pong in a german club where we have this TTR rating to know how good you are. Because we had not a lot of bottle openers i decided to print these. I printed some even with the name on it to motivate someone to get more points. 🙂

  • Plant eating Man 3D Print Model

    Plant eating Man 3D Print Model

    Plant Eating Man

  • Shadow casting plant pot 3D Print Model

    Shadow casting plant pot 3D Print Model

    The idea of this plant pot is that it casts shadows of your plant at night.
    I have used a 5V LED strip that comes out of a cheap usb lamp. see picture

  • Dice 3D Print Model

    Dice 3D Print Model

    Summary
    a cool 30mm Dice for your games.

  • Nerf Rival Zeus Stock Attachment Adapter 3D Print Model

    Nerf Rival Zeus Stock Attachment Adapter 3D Print Model

    Summary
    Shove this onto the end of your Nerf Rival Zeus and then you can attach any Nerf stock to the Zeus! There is a hole that will allow a bolt to go through and secure the adapter very well. You may not even need that, it is designed to fit tight.

  • Alien 45 degree vtx mount version2 3D Print Model

    Alien 45 degree vtx mount version2 3D Print Model

    Summary
    redid after holes of version 1 didnt line up, changed my print angles to see what looks better.

  • Tevo Tarantula MKS Gen-L Plate w/MOSFET 3D Print Model

    Tevo Tarantula MKS Gen-L Plate w/MOSFET 3D Print Model

    Summary
    I decided to switch to a MKS Gen-L so I could replace NEMA 17 drivers when/if needed, but I still wanted to use my original plates. While I was designing the new plate, I decided I’d add a side pod to mount a MOSFET out of the way (this MOSFET if you’re thinking of using this https://smile.amazon.com/gp/product/B01HEQVQAK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). I’m still very much a beginner with Fusion 360, so if you can do it more elegantly, please feel free to remix it (and drop me a line so I can see what you did and hopefully learn from it).
    The MOSFET is taller than the MKS Gen board obviously, so you might need to use taller offsets than the stock ones from the Tarantula. The sketches in 360 should allow you to print the MOSFET cover separately from the MKS cover. I haven’t printed it yet or I’d tell you all for sure if that’s the case.

  • Electric_Driver_Upgrade_For_Slider_V4.0 3D Print Model

    Electric_Driver_Upgrade_For_Slider_V4.0 3D Print Model

    Material：

  • Hydro Dipping Prints 3D Print Model

    Hydro Dipping Prints 3D Print Model

    Add Full color graphics to 3D Printed parts!
    In this week’s project, we’re hydro dipping 3d printed parts.

  • Mickey mouse lithophane 3D Print Model

    Mickey mouse lithophane 3D Print Model

    LIPOFANIA of Mickey mouse

  • Smartphone support 3D Print Model

    Smartphone support 3D Print Model

    Support smartphone and tablet, simple but effective because it allows to leave the shell of the smartphone or the tablet with a good inclination, most of the supports are too straight and too thin and only the smartphone passes.

  • Tali’s Mask – LED Sound Reactive 3D Print Model

    Tali’s Mask – LED Sound Reactive 3D Print Model

    Summary
    Led is sound reactive heres the code:
    Also a youtube video demonstrating it. I will create the mask if enough people have interest but heres something Tali cosplayers can use for their masks.
    Code:
    include
    include
    ifdef AVR
    include <avr/power.h>
    endif
    define PIN 6
    define NUMPIXELS 1
    //==============Defining variables for fix_fft=======================
    int x = 0;
    char im[128], data[128];
    char data_avgs[14];
    int i = 0, val, steady;
    int l = 0;
    Adafruit_NeoPixel pixel = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
    void setup() {
    Serial.begin(9600);
    pixel.begin();
    pixel.show();
    }
    void loop()
    {
    //===================FFT algorithm=======================
    for (i = 0; i < 128; i++)
    {
    val = analogRead(A9);
    steady = val;
    data[i] = val;
    im[i] = 0;
    }
    fix_fft(data, im, 7, 0);
    for (i = 0; i < 64; i++)
    {
    data[i] = sqrt(data[i] data[i] + im[i] im[i]);
    }
    for (i = 0; i < 14; i++)
    {
    data_avgs[i] = data[i 4] + data[i 4 + 1] + data[i 4 + 2] + data[i 4 + 3];
    data_avgs[i] = map(data_avgs[i], 0, 30, 0, 9);
    }
    int value = data_avgs[0];
    Serial.print(“Time domain: “);
    Serial.println(steady);
    Serial.print(“Frequency domain: “);
    Serial.println(value);
    delay(100);
    pixel.setPixelColor(0, 75, 0, 130); //change color here by changing RGB values. In this case R=150, G=150, B=150
    int bValue = map(value, 0, 30, 0, 255);
    pixel.setBrightness(bValue);
    pixel.show();
    }

    Custom Section

  • Decora Rocker Switch 3D Print Model

    Decora Rocker Switch 3D Print Model

    Summary
    This is the switch plate I designed as the front for my home automation switch projects… It is set up to use 2 5mm momentary switches and one 3mm momentary switch (as an inset reset button).
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    No Supports:
    No Notes:
    Normal settings for your material should work fine. It is an especially easy print.