Summary
An enclosure for the Arduino Shield Stepper Controller for the MillRight M3 CNC Machine.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Enclosure for Arduino Stepper Controller Shield (MillRight M3) 3D Print Model
-
T-slot Re-D-Bot (for rails+rods kit) 3D Print Model
Summary
6mm slot
Also check:
T-slot rod Z axis modhttps://www.thingiverse.com/thing:2393319
T-slot linear rail upgrade kit https://www.thingiverse.com/thing:2394696 -
Spinner Capitão América Modelo Tradicional 3D Print Model
Summary
Eu colo a parte azul com super cola
Contra porca M12 -
Hand Spinner Royal Clash 3D Print Model
Hand Spinner on Clash Royale.
Material:
– 1 bearing 608
– 3 nuts for M8 -
SR71 A Blackbird 3D Print Model
The fastest plane in the world, just that!
I created this model to practice surface modeling on CREO Parametric 3.0 (industrial engineering software) -
Hand Spinner Cyclist 3D Print Model
Hand Spinner on the theme of cycling.
Material:
– 4 bearings 608 -
DJI Spark Remote Stick Guard 3D Print Model
Summary
Stick guard for your DJI Spark remote. Flat disks to stabilize both sticks and a raised center to avoid contact with the buttons. The slot in the center can be used to further secure the guard with a velcro strap. It might be possible to use this for a Mavic remote as well as (the distance between the sticks should be the same for both) but I have not personally tested this on a Mavic remote.
Print Settings
Printer:
Qiditech 1 Rafts:
No Supports:
Yes -
Gone Fishin’ Pole 3D Print Model
Summary
A replacement fishing rod for the game Gone Fishin’
Enjoy!
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator (5th Generation) Rafts:
Doesn’t Matter Supports:
No Resolution:
.2mm Notes:
Optimized for .4mm nozzle -
Iron Man Mark 46 Helmet (Civil War) 3D Print Model
Summary
I just recut Killonious STL file to 7 pieces. hardly any Support is needed. started print on Friday night and was finished by Sunday evening.
Print Settings
Rafts:
No Supports:
Yes Infill:
.2 -
Red Hood Helmet (Batman) with Details 3D Print Model
Summary
So after I posted my previous Red Hood Helmet, I was asked if I could add the details to the helmet. So here they are. Enjoy.
This helmet is sized for an adult male. Please check PDF file for dimensions. Units are in millimeters. -
T-rex head wall head 3D Print Model
Model 3D for printing a T-REX head, ideal decoration for a living room! High definition model (278 MB) for a clean print up to 1 meter long!
-
Spiderman frame cosplay mask lens mask 3D Print Model
Frame for amazing spiderman lens. Perfect Movie for Cosplay!
-
Menpo Japanese for Armor 3D Print Model
3D model of a Japanese menpo for collection or costume. Replica faithful to a menpo edo.
-
Constructor gun 3D Print Model
Summary
I create a series of prefabricated 3D printed constructors. Currently, three ready-made designers are ready. In this article I will talk about the national team gun. The purpose of the project is the development of 3D printing for educational purposes.
The printing material is white PLA. The reason for choosing the material is simple:
low shrinkage. And since the elements of the designer should be approached to each other without fitting, shrinkage is the most important factor.
Excellent adhesion. Since the cannon itself is printed standing upright, a good adhesion of a small area is extremely important. However, you can still print only with the raft.
Safe.
The advantage of printed constructs is obvious.
Low cost price
you can select the desired scale
a fascinating process of printing and assembling the designer.
The cannon consists of eight parts. You can collect both on glue and without it. To paint details (if there is a desire) it is desirable still in the disassembled kind.
Print Settings
Printer:
Picaso PRO250 Rafts:
Yes Supports:
No Infill:
20% -
Dally Down Roping Logo 3D Print Model
Summary
Printed this for a friend of mine that does roping in the High Desert in California.
Print Settings
Printer Brand:
FlashForge Printer:
Finder Rafts:
No Supports:
Yes Resolution:
Standard Infill:
20% -
NEW 3D-model Hand Spinner 3D Print Model
Summary
Reinforced version of the spinner.
Bearings 607 (according to GOST 17) 19×6 mm. Weights are steel pentaks of the same size.
This is my first spinner which I did and I really like it!
You can also download this model and print it out for yourself! I’m always happy to share something new!
My work was done on a 3D printer called Prusa I3 3D Printer (https://goo.gl/hdP131). -
hand-phone holder with latch 3D Print Model
Summary
This is a hand phone holder with latch. With this you can combine with other latch. -
USB holder with latch 3D Print Model
Summary
USB設備越來越多，很容易變得凌亂，這個USB holder可以容納6個USB，如果不夠，可以再接一個，再多USB也不怕亂。 -
Pendant Lion STL 3d model 3D Model
Pendant Lion STL 3d model for 3d printing 3D print modelPendant Lion Model is fully ready for 3d printing of plastic, metal or jewelry wax and CNC!Pendant Lion STL 3d model for 3d printing.Recommended material – oxidized silver.silver 925 Sterling – 21 grams.Other sizes and format can be fabricated – it’s FREE, just let me know what size you want by using the contact designer button on the right.Any questions? Please contact me.
-
Footballer 02 Headstrike 01 Stl 3D print model 3D Model
3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
Footballer 02 Headstrike 02 Stl 3D print model 3D Model
3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
Footballer 02 Headstrike 03 Stl 3D print model 3D Model
3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
IPhone 7 Plus Case Model 3D Model
Original size caseBased on official Accessory Design Guidelines by Apple
-
IPhone 7 Simple Case Model 3D Model
Original size caseBased on official Accessory Design Guidelines by Apple
-
Fully 3D-printable 1/10 4wd buggy 3D Print Model
This is my take on a high performance 3D-printable 4WD buggy. It can be built with belt drive connecting the forward and rear gearboxes or using separate motors for the forward and rear gearboxes. It can also be built as a front wheel drive or rear wheel drive car off course, but that’s not the intention. Parts that are required for the belt drive version are marked “belt”.
-
Nespresso 4 Capsules 3D Print Model
On the photo the version for my coffee maker “Caffitaly” but the STL file is for Nespresso.
The bottom of the lid should be glued to the top. -
Water Motor 3D Print Model
This is a motor which works with water. Connect a water pipe and the motor works. I made this object with Fusion 360.
-
Poppit Blowgun 3D Print Model
For shooting those little white paper fireworks that “pop” on impact. Includes crossbeam to reduce chance of inhaling the ammunition.
-
Bud Figurine dog bull terrier 3D Print Model
Scan of a bright advertisement of bar bud dog bull terrier
-
Gopro Lens Ring 3D Print Model
Summary
I made this because the plastic ring around my gopro lens broke in half. So my options were to spend $15 on amazon or go through the process of sending it in and getting a new gopro. This might require a little bit of sanding to get it to fit just right. I would say print at 100% infill just so its more durable. -
Corner brackets for printer enclosure, two widths 3D Print Model
Summary
Top and bottom brackets for two thickness’s of material. Top has a shelf for top material. Post acts as a support for shelf when printing. -
Cable Clamps 3D Print Model
Summary
Clamps snap closed with finger pressure and can be released with a quick twist of a screwdriver blade or your finger. Just add an adhesive-backed foam mounting pad for allows the clamp to be applied quickly to almost any clean, smooth and grease-free surface.
I also add 3DM file for (rhinoceros) in case someone wants to change anything.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
0.2 Infill:
15 -
Pontiac Grand Am Air Control knob 3D Print Model
Summary
This should work with a few grand am’s because I believe a lot of there air flow knobs are the same. I made the hole a little small due to the tolerances of my printer so you may need to make it slightly bigger if it does not fit. Other than printing with no supports print settings shouldn’t matter. -
Print-in M8 Fidget Spinner 3D Print Model
Summary
Designed to fit a 608zz bearing and 6 M8 hex nuts.
This fidget has the hex nuts inside of the print, so in order to get them in you must have your printer stop the layer before it begins covering the hex nuts. I recommend printing at a 0.2mm layer height and stopping it the layer before it begins to fill over the nuts, the height at which this occurs is 8.4mm. I achieved this by separating the process into two using Simplify 3D, however you can achieve the same effect using another slicer by editing the gcode to add in a pause at that layer. Make sure you push the nuts all the way down, they should fit nicely and the nozzle shouldn’t touch them when the next layer begins.
Enjoy!
Print Settings
Printer:
Micromake D1 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
30 Notes:
Feel free to show your support by tipping me with bitcoin:
1QaLWG5rsPkLyCriwrX6DQonhbXRbEqK1 -
Iphone 7 Empire state building cover 3D Print Model
Cover for Iphone 7 with Empire state building silhouette
-
Nefertiti Queen of Egypt 3D Model
Nefertiti, the queen of Egypt, who lived 3,400 years ago, was the chief wife of the tsar, the reformer Amenhotep IV, who is better known as Akhenaten. Any modern person at the mention of her name imagines a beautiful woman with delicate, regular features, a long graceful neck.Scanning done by one pair of scientists from America, in the museum
-
XWING TMG TIE Advanced Bin (Harbor Freight) 3D Print Model
Summary
Remix using RbRoss’s TIE Advance Blank. -
XWING TMG Millenium Falcon Bin (Harbor Freight) 3D Print Model
Summary
Split Bin Remix of RbRoss’s Amazing Falcon Bin.
My Print bed isn’t large enough so I had to split it in half like the decimator bin I made. -
FAN holder for ZAV hotend (chimera) with volcano 3D Print Model
Summary
Model ONLY for ZAV hotend
It’s beta version. Not tested yet V0.1.
You can test it and write comments
Print Settings
Printer:
ZAV Rafts:
No Supports:
No Resolution:
0,2 Infill:
20 Notes:
I print it without support -
Zigzag- iPhone and Apple Watch table stand 3D Print Model
Summary
Hi folks,
yes, I know, is boring to have ANOTHER iPhone and bla bla stand, and that almost 90% of the ones that we print are a good for a couple of days…but, this one is going places 😉
Zigzag comes from my disappointment that all the stands only focus in one thing: hold the d… phone/watch and charge it. Ok, is fair enough, but nobody thinks about the f… cables! (unless I am de only one around here how still charges his devices with cables).
I have a obsession agains cables. I hate so much that the cables of all my electronic devices are always a salat, and that no stand/holder takes consideration about this; so after years of suffering an idea came to my mind: “Hey, you are a mother*** designer, so design one!”. So I did it.
Zigzag tries to work on the cable problem mentioned above, and tries to do it in a elegant and simple way. Still is needed to say that this is a prototype (that works) but that is still to be refined, so I upload also the original 3D files to adapt it to your phone size (in this case is modelled for an iPhone SE), make the cable holder bigger, rounder, etc… So feel free to work on it, and as me, to feel the exciting sensation of a “less messy” cable salat at home 😉
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Extended Rafts:
No Supports:
Yes Resolution:
100% Infill:
20% Notes:
Made with Fusion 360 -
razor blade case necklace 3D Print Model
Summary
this is a razor blade case necklace or keychain or also a charm , the words written on the sides are pain and death in japanese
Print Settings
Printer Brand:
RepRap Printer:
RepRap Kossel Rafts:
Yes Supports:
Doesn’t Matter -
Remington 1885 revolver element 3D Print Model
Design in CATIA V5. Print Da Vinci Junior, material PLA Black
-
Toyota 1/10 interior door panel 3D Print Model
Summary
Use mirror feature on Cura for the pairing part -
7mm Smol Drone 3D Print Model
Summary
This drone is designed for the e011 flight controller or anything smaller and 720(7mm by 20mm) motors. Can fit propellers 68mm or lower. -
Lucky Pig Bobble 2 3D Print Model
Summary
A second lucky pig bobble – see thing:1828478. The bobble is composed of two parts that print more readily than the original. A recursive curve is used as a spring. The bobble was designed to work when printed in PLA but adjustments can be made for other materials.
The spring was calculated using the program included with thing:2377518 – Closed Recursive Curves. The input parameters were: 5,10,4,180,2,17,0,1,0,2,bobble_base.stl”. The final “2” in the list is the radius of the spring – 2 mm. To make a stiffer spring increase the radius to 2.5 mm.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator (5th Generation) Rafts:
Yes Supports:
Yes Resolution:
0.3 mm Notes:
The spring needs support; the head can be printed without support. -
Earrings coffin and box 3D Print Model
I present to you one of my creations a pair of earrings in the shape of a coffin and which is besides a small box, to seal your little secrets, who would go in search of a coffin a secret message?
-
Runcam Mini low profile mount 3D Print Model
Summary
I made up a quick 10 deg. low profile camera mount for the Runcam Swift mini. This was in tandem with the Runcam mock up I did to test fit the setup.
This is the file I used to make this mount.https://www.thingiverse.com/thing:2391750
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Notes:
scaled up the mount 1.02 in cura andit fit the camera great
How I Designed This
This was drawn in Autodesk Fusion 360http://shop.runcam.com/runcam-swift-mini/ -
Metallica DIBUJO 3D 3D Print Model
Summary
Dibujo 3d James Hetfield
Imprimir las 10 primeras capas con filamento negro
de la 11 hasta terminar en filamento blanco…
respetar la altura de capa
0.2 mm la primera capa
0.1 mm la altura de capa
100 % relleno
velocidad 45 mm/s máximo
boquilla 0.4 mm
DRAWING 3D James Hetfield
Print the first 10 layers with black filament
From 11 until finished in white filament …
Respect layer height
0.2 mm the first layer
0.1 mm layer height
100% filler
Speed 45 mm / s maximum
Nozzle 0.4 mm
3dlito -
Pool Robot Water Outflow Nozzle 3D Print Model
Summary
This optimized water outflow nozzel was designed to improve water throughput of the Maytronics DOPLHIN Dynamic Plus pool cleaning robot. Especially cleaning steep walls, the robot has to provide good suction which directly depends on its flow rate.
I designed the part with Sketchup, sliced it with Simplify 3D and printed it with a German RepRap X400 Pro printer. I finally came to PLA (black colored due to better outdoor resistance compared to semi-transparent PLA) after four flops with ABS (warping).
Print Settings
Printer:
German RepRap X400 Rafts:
No Supports:
Yes Resolution:
0.22 mm Infill:
25% Notes:
Printed with 1.75 mm PLA (Black) by German RepRap with a 0.4 mm Nozzle.
Nozzle temp was 193°C, heated bed temp was 58°C.
First layer speed reduction set to 20%. Default printing speed was set to 2000 mm/min. Layer thickness was set to 0.22 mm.
I used a brim (1 layer) with 15 turns.
Thin walls were prohibited to be filled with infill.
Three outline perimeter were used. Printing time was about 4 hrs (exclusive preheating machine).
Post-Printing
Optimized water outflow nozzle for Maytronics pool robot DOLPHIN Dynamic Plus
In order to improve water thoughput of the robot for more efficient cleaning I re-designed the original part with a slightly longer tube with funnel shape. In opposition to the original part this new design encloses the propeller entirely. Due to the higher tightness between propeller and outflow an better flow guiding, an improved water throughput can be assumed.
First 5 testruns of the robot looked very promising.
Presumably this thing could fit also for other Maytronics pool robots.
How I Designed This
Made with Trimble (Google) Sketchup
The part was fully designed by the help of Sketchup Pro 2017. Difficulties with the bended blades inside the funnel were solved by the very helpful plugin “Bezier Surface”. -
Cyclone PCB Modified Electronics Cover 3D Print Model
Summary
The zip ties on the Y linear bearing holders were rubbing against the electronics cover on my machine. So I made this new one that has a channel to give more clearance for the zip ties.
But really, it’s probably better to just relocate the electronics elsewhere. -
Phone Tripod (fits most phones!) 3D Print Model
This tripod uses cheap coolant pipes as flexible legs. “Iphone6tripod.stl” will accept phones sized 65mm – 70mm (iphone 6/6s/7, galaxy s4, htc one, blackberry z10, nexus 4/5). “Iphone5tripod.stl” will accept phones sized 59mm – 64mm (iphone 4/5/5s/se). if you have a case make sure to measure. only tested iphone 6s and 5s. link in youtube video description for cheap coolant pipes ($1 ea.)
-
Wasp Trap (redesigned!) 3D Print Model
Easily turn your old soda and drink bottles into wasp traps, cap prints quickly and is reusable! if you print one i’d love to see how many you catch! If you would like to see my design process from start to finish please watch the youtube video https://youtu.be/EpzpM1o6i6k
-
Imperial Crest Fidget Spinner 3D Print Model
Printed at .01 layer height with %100 infill (to increase weight) in black PLA (1.75mm) on a printerbot simple metal. bearing friction fits in place.
-
Key holder Organizer SD 3D Print Model
I realized this key ring that I find practical, 3D Sketchup creation software.
-
Pen holding tab for any pen/pencil and any notebook/notepad 3D Print Model
This is a pencil holding tab that can be glued to the back page of any notebook or notepad and can be scaled to hold any pencil or pen.
-
Eachine VR D2 Side Cover for glasses 3D Print Model
Summary
I wear glasses and cannot fit the Eachine VR D2 goggles on with my glasses. I took apart the goggles, cut out a small section on each side and hot glued this printed cover to block out light. Simple print, works pretty well!
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2 Infill:
25% -
Runcam Micro Camera Mount 3D Print Model
Summary
Have not printed it yet but going to. Work in progress. -
Star Wars Vintage Figure Variant Stand 3D Print Model
Summary
Fits vintage Star Wars figures.
PLA recommended -
RC Plane Wheel 65mm 3D Print Model
Summary
I’ve designed these wheels for my Hall Bulldog Racer plane.
They are 65mm diameter and 20mm wide, fit perfectly in the wheel pants I designed for them (check that other design).
I printed the hub in ABS and the tyre in TPU, but I think PLA for the hub will work just fine. -
Minions 3d print cookie cutters model 3D Model
3d print cookie cutters modelsHeight 100mm.I can moify model as You need.Please send me Your wishes.
-
Aquarium floating barrier for duckweed 3D Print Model
For a friend, I made this floating barrier, the two sides making the corners have a larger surface in order to adhere to the walls by capillary effect.
-
Arnold Schwarzenegger 3DModel Printer friendly version 3D Model
Bust Arnold Schwarzenegger, high detail, ready for printing, the model is as similar to the original, perfectly suited as an ornament to your desktop
-
Fidget Spinner Thumb Rest 3D Print Model
Summary
I really liked the thumb rest on this adafruit spinner design. However, one side is form-fitted for the thumb the other side wasn’t. Most thumb rests I see on Thingiverse were 2 parts where one side was completely flat. Not very comfortable. So I redesigned it so both sides were the same. It made it into 3 parts instead of 2, but the end result is much better. -
Furniture Floor Protection Coasters 3D Print Model
Summary
2 furnature floor coasters.
Small is 45mm internal diameter
Large is 50mm internal diameter
Print Settings
Printer:
Fisher delta Rafts:
No Supports:
No Infill:
30% Notes:
It may be wise to have a higher infil due to the pressures these could experience. -
Unifi AC LR custom backpalte 3D Print Model
Summary
Custom backplate for to replace the stock backplate for the wifi access point Unifi AC LR. Should be compatible with any other Unifi mount.
Differrnces to the stock backplate:
No latching mechanism: the stock backplate has a latch that is very difficult to release. Therefore I wanted something that made tanking the acces point off the backplate easier.
Designed to be mounted with Tesa powerstirps (Large, example here) and not with screws as the original backplate
Designed in autodesk fusion 360, the *.f3d file can be imported to make further modificaitons.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.15mm Infill:
5% -
Small Plane Toy 3D Print Model
Summary
Originally designed with Tinkercad, this plane is quick and easy to print and with minimal assembly (all that is required is some kind of tape or glue to attach wings and propellor)! All the parts are in one file for easy access, and the print time is less than an hour (on most printers).
Post-Printing
Assembly
The simple assembly only has 5 steps.Attach the front plane face (the disc) to the fuselage (the cone). All of the steps including this one require the tape or glue, although hot or gorilla glue is recommended.
Attach the propeller (the bowtie-looking object) to the front of the plane. Sadly it does not spin without modifications, and I may try to make an MK-2 of this with a spinning propellor.
Attach the large set of wings to the flat part of the fuselage (on top) and wait until glue is dry. Make sure the wings are centered or angled to your desire.
Attach the small set of wings to the back of the fuselage (near the tip, but still on the same side as the other wings).
Attach the tail fin perpendicular and over the middle of the small wings to create an “upside-down T shape”.
Your plane is now finished, so fly away with your imagination! -
Modified Adafruit DIY Bluetooth GamePad (Case) 3D Print Model
A modified version of the Adafruit Bluetooth Gamepad, with XY buttons, different button layout, and snap together case rather than screw fastened. NOTE: I will not be including the updated decorative face plate design. However, I will be willing to make one if you wish to make a similar project. Likewise, I can share a link to a PCB for the buttons if you would like it made available, as the Adafruit Perma boards will not work without major surgery and lots of precision.
-
SquareMix 0 3D Print Model
Pendant with unique design.
Ready for 3D printing.
For a perfect gift !
Enjoy! 🙂 -
Demon Mask In to Parts 3D Model
High poly demon mask.It consists of two parts.Native file format is .blendRender performed in cycles. Presentation includes screenshots either.
-
Radiation Fidget 3D Print Model
Summary
Uses 1 608 bearing and 3 0.5 inch nuts. Can be printed with no raft and low infill. Tested with 15% tetrahedral infill and rock solid. Printer calibration is key here as the bearing and nut will not fit snugly if marginally off sized.
Print Settings
Printer:
MonoPrice Maker Select V2.1 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 mm Infill:
15% tetrahedral or equiv. -
Fan ducts remix – Flsun cube printer 3D Print Model
Summary
Another crudely remixed file.These are the fan ducts I’m using for the Flsun Cube printer. Hopefully this helps someone else out.
The ducts work with this fan mount https://www.thingiverse.com/thing:2358917 -
Enclosure for IR-Lock Landing System Sensors 3D Print Model
Summary
This is an enclosure designed to contain a Pixy camera (CMUCAM5) and a Lidar-Lite V3 for the IR-Lock precision landing system. The grid of holes at the bottom of the enclosure are spaced 3.4mm from each other and serve to provide a flexible way to mount the enclosure a drone frame. It was initially designed to fit the mounting slots on a DJI F450 bottom PCB.
The enclosure uses M3 screws. All the holes on the bottom part of the enclosure can be drilled out using 2.5mm dia drill and tapped directly using M3 screws. The holes on the top part of the enclosure, drilled out using a 3.1mm dia drill, serve as through-hole for the M3 screws. The clearance between top and bottom part of the enclosure is 0.25mm providing a loose fit for pieces printed on our printer.
