3DHunt.co

Category: 3D Print Models

Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.

  • Guía SujetaElevalunas para Audi A4 B5 3D Print Model

    Summary
    Pieza para sujetar elevalunas eléctrico para Audi A4 B5. Es la pieza que se usa de guía.
    Recomendaciones de impresión:

    Imprimir la pieza con boquilla de 0.2 mm, y un refill del 100% para que quede fuerte. La altura de capa recomendada es 0.2 mm.

    Aunque está pensado para PLA, creo que con ABS es posible que dure más y sea más robusta.
    Importante: Pieza NO TESTADA

  • MTvplot 3D Print Model

    MTvplot 3D Print Model

    Summary
    After i discovered the wonderful vertical plotter made by rincey12 and his awesome diy-manual (@ makerblog.at) i decided to make a quite similar design from scratch (and try to improve some known problems by throwing in some bearings).
    For the gondola-arms i printed them @100% infill and drilled the small holes (for the cord and the set screws to secure it) afterwards to gain some weight and stability. My whiteboard-markers are ~17mm in diameter, so i used a 20mm aluminium tube as gondola-core and some set screws to be able to use smaller pens (whithout changing the mid-point). Between the bearings i used a printed 0.5mm spacer (some more sizes included).
    As i wanted to try it on my already mounted whiteboard, i made some ‘front-side’ holders for the stepper motors (to quickly screw them to your wall-of-interest). The gears are sized for a roller blind cord with a sphere diameter of 4,5mm and a distance (mid-sphere to mid-sphere) of 12mm.
    To finally operate it, i used the fantastic polargraph-code made by Sandy Noble.
    Part-list:
    5m roller blind cord 4,5/12
    2x deep groove ball bearing 6004 2RS 20x42x12 mm
    2x stepper motor – NEMA-17 200 steps/rev, 12V 350mA
    1x Geekcreit UNO R3 ATmega328P Development Board For Arduino
    1x Motor Drive Shield L293D For Arduino
    8x set screws M4 (10mm)
    1x aluminium tube (20mm outer diameter, 1mm thick)
    some M2/M3/M4 screws to secure the motor holders, servo and gears
    (all these parts + shipping to germany cost me around 80€ in the end)
    Big THX to all previous makers and coders providing awesome ideas/manuals & software, this was/is a very cool project. Happy for questions/remarks if you have some.
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    Yes Resolution:
    .2 Infill:
    100 (motor holders 50) Notes:
    NGEN with ext/bed 225/80°C on glass
    How I Designed This
    Fusion 360

  • Exploding Kittens Game Insert 3D Print Model

    Exploding Kittens Game Insert 3D Print Model

    This is a insert for the card game Exploding Kittens to keep things tidy.

  • WhatsApp Kiss 3D Print Model

    WhatsApp Kiss 3D Print Model

    Just for fun. 0.25mm gap. Heart should not need gap, so you will need a bit of glue. (I’m not related to WhatsApp in any way)

  • Cactus Charm! 3D Print Model

    Cactus Charm! 3D Print Model

    Cute charm of a cactus! Make your own charms or create a unique gift!
    It can be used as a charm for your necklaces, bracelets, key chains, ornaments for you planner … everything you can imagine!
    There are two different models!

  • Filament Drive Block for Extruder MK7 3 3D Model

    Filament Drive Block for Extruder MK7 3 3D Model

    Filament Drive Block for Extruder MK7 Plus+3

  • Arched Cube Top Hook / Holder 3D Print Model

    Arched Cube Top Hook / Holder 3D Print Model

    Summary
    An arched cubical wall holder, designed for plate-topped cubicles. I made this mainly for holding white boards and smaller signs, but it could be used for just about anything that has a standard mounting slot.
    Update: Added another hook with the holder knob rotated 90°, for those with side-slotted boards.
    Print Settings
    Printer:
    101Hero Rafts:
    No Supports:
    No Infill:
    20% Notes:
    Note that infill is less important due to the design of the thick holder edge. The edge has forced built-in walls across the print axis, making that part stronger than a heavier infill alone could achieve.

  • Stubby Wrench Holder – Metric 3D Print Model

    Stubby Wrench Holder – Metric 3D Print Model

    Summary
    Wrench Organizer for Harbor Freight 12pc Stubby Combination Wrench Set. Tray is designed for Metric wrenches in the set.
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.3 Infill:
    20% Grid

  • etchachip 3D Print Model

    etchachip 3D Print Model

    Summary
    my version of a CHIP-E
    Print Settings
    Printer:
    prusa i3 pro b Rafts:
    No Supports:
    No Resolution:
    0.2mm layer Infill:
    10 %

  • Anet A8 Filament Guide 3D Print Model

    Anet A8 Filament Guide 3D Print Model

    Summary
    Hi!
    This is a simple, clip on/slide on, filament guide that I made for my Anet A8. it’ll fit on anything that is 8mm thick.
    It clips/slides on the top part, right between the screen and the buttons.
    What’s different about this one is that it’s in two parts (both parts are “joined” by the smallest possible bridge so you print both in one file then detach the side part)… The big part has a gap where you can slide in your filament (you have to take It off the printer to do that), and the small part fills that gap once you’ve put in your filament. I thought it’d look neater that way.
    I printed at 60mm/s with 15% infill and it was fine, although printing at 30mm/s gave me a better finish..
    sorry for the photo quality, taking good photos of black parts is really hard.
    Oh! there are two separate STL files, one has a straight “middle”, and the other one has a cross-shapped notch. I printed the straight one and it sits perfectly, but I thought having a notched one might be more secure. Print whatever you choose and comment about it.

  • torlo 3D Print Model

    torlo 3D Print Model

    Summary
    The torlo was born out of the idea of using a simple oscillating motor as a power source. The Voice coil of a scarp laptop HDD fit the bill nicely. The Voice coil with its powerful magnets has enough brunt to push a bunch of 3d printed gears .The basic idea of the torlo was adapted from the previous holo clock and taken further. The gears of the clock hang to one side and the rings to the other side of the frame. The voice coil is located in the center of the drive train and is driven by a attiny pulsing it every 2 seconds. The balance wheel when pulsed pushes a cam and a ratchet to turn the clock 2 seconds further. Rest of the clock is a simple drive train driving the minute and hour rings which display the time..
    The clock is a slightly complex project because of the intricate printed parts needed. It is a little finicky to assemble and needs a lot of patience.
    All the parts are printed with a 0.4mm nozzle at .2mm – .25mm layer height. The gears need to be a little loose so if the printer is not calibrated nicely they will freeze.

  • Twisted Vase Planter 3D Print Model

    Twisted Vase Planter 3D Print Model

    This is a beautiful vase planter I designed to house my succulent plants. I love it and have 6 of them throughout my house. enjoy!

  • Audi key ring 3D Print Model

    Audi key ring 3D Print Model

    Key rings for Audi automobile brand

  • DOOR_STOP_KEY 3D Print Model

    DOOR_STOP_KEY 3D Print Model

    Avoid closing or blows by your doors.

  • lam 3D Print Model

    lam 3D Print Model

    fgdg

  • Keychains emoji qui pouffe 3D Print Model

    Keychains emoji qui pouffe 3D Print Model

    Here are two keychains that I have redesigned from the sticker Messenger pouffe. One dish, and another in volume. Good impression !

  • CDXSniperrifle3dprintmodel 3D Model

    CDXSniperrifle3dprintmodel 3D Model

    No textures, HIGH POLY 3d print ready version AND original CAD STEP file.Scale 1 to 1rendered via keyshot 5

  • Biohazard Fan Cover 40×40 3D Print Model

    Biohazard Fan Cover 40×40 3D Print Model

    Summary
    Bophazard Fan Cover for 40×40 Fans

  • Gravity Wave Spectrogram 3D Print Model

    Gravity Wave Spectrogram 3D Print Model

    Summary
    This is a spectrogram of the gravity wave created by the collision of two black holes and detected by the LIGO detector in Hanford WA during event GW150914 on 14 Sept 2015. The big peak shows the “ringdown” increase in intensity of the high-frequency components as the black holes spiral together faster and faster. From https://losc.ligo.org/events/GW150914/

  • Megatronic card mount 3D Print Model

    Megatronic card mount 3D Print Model

    Summary
    Two minimal designs to mount megatronic v3.0 (3.1?) card on 2020 extrusion.
    I let some room on each side because I planed to make a cover with fan mount later.
    It need 5 M3x10 screws.
    I didn’t printed the light version yet as the plain version is more suitable for my case because it protect the back of the card from any accidental contact with the frame.
    Print Settings
    Printer:
    custom Rafts:
    No Supports:
    No Resolution:
    .3 Infill:
    25 to 30

  • P’napple 3D Print Model

    P’napple 3D Print Model

    Summary
    It’s a pineapple

  • Hubcap for Gen2 Prius 3D Print Model

    Hubcap for Gen2 Prius 3D Print Model

    Summary
    This is a small cap to cover the central hole in Toyota Prius wheels from the Gen2 line. The “Touring” model has nice-looking alloy-spoke wheels and you can dispense with the factory hubcaps — but the axle bolt remains visible. This little cap fits in the center of the wheel and snaps into the same small interior groove that holds the center of the factory cap in place.
    You can customize it with your own logo/initials/whatever, of course!
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    Yes Supports:
    Yes Resolution:
    200 µm Infill:
    100% Notes:
    This is a structural part and I did not skimp on the material.
    I printed (and deployed) it in Colorfabb XT material, which is a little tougher than many PLAs, with a bit of springy “give” to it. ABS might be a good choice too. Given the environment I would not print it in PLA.
    Print this the opposite way that you might think if you’re used to avoiding bridges — it should look like a mushroom on the print bed, with the cap forming a large bridge. That makes the visible part (the rounded cap) come out cleaner.
    I prepared this with Slic3r. Supports were ON (“rectilinear” setting with 3mm support spacing).

  • Lego Head Earrings 3D Print Model

    Lego Head Earrings 3D Print Model

    Design in CATIA V5

  • Large Machine Gun LMG 3d Print Model 3D Model

    Large Machine Gun LMG 3d Print Model 3D Model

    Large Machine Gun (LMG) 3d Print Model (Hi-Res).

  • Gamepad-A1 3D MODEL 3D Model

    Gamepad-A1 3D MODEL 3D Model

    $5 min. For a Print of the Gamepad-A1 (Made By Keontae Carter through TinkerCAD).

  • Mystery Black by Yellow Vase 3d Print 3D Model

    Mystery Black by Yellow Vase 3d Print 3D Model

    A 3d Print of Mystery Black by Yellow Vase 3d Print (Made by me by TinkerCAD).

  • Electrical Stand Post w- Caution Display 3d Print Free 3D Model

    Electrical Stand Post w- Caution Display 3d Print Free 3D Model

    A Electrical Stand Post w/ Caution 3d Print Made by me through TinkerCAD.

  • Transgender Symbol Ring / Napkin Holder 3D Print Model

    Transgender Symbol Ring / Napkin Holder 3D Print Model

    Summary
    A tripled Venus, Mars and Mars with stroke symbol (“⚧”) to represent transgender people.
    Print Settings
    Printer Brand:
    Wanhao Printer:
    Wanhao Duplicator i3 V2 Rafts:
    No Supports:
    No Resolution:
    .2mm Infill:
    10% Notes:
    Printed using a single extruder with with five pauses, one for each color change. The photos show the model printed at 110%. Print it larger to get a napkin holder.

  • The Delta Troubadours – Guitar Pick Bowl 3D Print Model

    The Delta Troubadours – Guitar Pick Bowl 3D Print Model

    Summary
    Made this guitar-pick shaped guitar-pick bowl for a dear friend who is in an amazing thriving band – The Delta Troubadours. This pick bowl is a very nice way of keeping track of all your guitar picks, because we all know how often we lose and misplace those!
    Check out the talented The Delta Troubadours at https://www.facebook.com/thedeltatroubadours
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    0.15 or 0.10mm Infill:
    10%, or none Notes:
    The print is pretty straight-forward, but it looks much better if printed in dual-color. Lay the bowl flat (no duh), and set a color-switch during the layer where the band name starts. Printed really well with PLA, PET, and ABS, all at standard temps.

  • Ancient Building 3D Print Model

    Summary
    Ancient Building

  • Monoprice Select Mini extended bed brackets 3D Print Model

    Monoprice Select Mini extended bed brackets 3D Print Model

    Summary
    Extended the bed brackets to utilize the 300x200mm Anodized Aluminum Y Carriage Plate XL Upgrade for Prusa i3.
    I have not tested, printed or fit as I have yet or order the carriage plate. If successful it will use the carriage, heat bed and borosilicate glass from the prusa I3 for the monoprice select mini.

  • Yin Yang Star Wars 3D Print Model

    Yin Yang Star Wars 3D Print Model

    A Yin Yang representing the empire and rebellion, the 2 facets of Star Wars.

  • CYRIL FIGGIS 3D Print Model

    CYRIL FIGGIS 3D Print Model

    Accountant of the animated series Archer.
    Third bust of the series but this time without base.

  • Obi Wan and Darth Maul Lightsaber 3D Print Model

    Obi Wan and Darth Maul Lightsaber 3D Print Model

    Summary
    Lightsabers

  • Needle Nose Pliers 3D Print Model

    Needle Nose Pliers 3D Print Model

    Summary
    Functional pliers

  • Hypercube Evolution Additions/Mods 3D Print Model

    Hypercube Evolution Additions/Mods 3D Print Model

    Summary
    Please try, but I have not actually tried this yet, I’ll try to modify if I get feedback.

  • Butterfly House 3D Print Model

    Summary
    House for the butterflies

  • Hydra Star V-1 3D Print Model

    Summary
    First version of the Hydra Star spinner. Slide in the bearing and it’s ready to go.

  • Atashin’chi 3D Print Model

    Atashin’chi 3D Print Model

    For more printing object please visit 86Duino facebook and give us a “like” and thanks for the tips…https://www.facebook.com/86duino

  • Cereal Scoop 3D Print Model

    We bought some “penny candy” jars to keep cereal in our pantry, and I just needed a simple scoop suitable for dry cereal. I designed this one in Fusion 360, and put a flat bottom on it to keep it from rolling on the counter, and also to make it easier to print with minimal supports. It came out quite sturdy and well balanced. I hadn’t planned on switching colors, but this was about a 4 ½ hour print job on my Prusa i3 MK2, and about halfway through, I thought it might be cool to switch filament and make it two-toned. I think it turned out pretty cool.

  • Earplugs 3D Print Model

    Earplugs 3D Print Model

    Flexible materials are recommended for the main parts and PLA for the valves.

  • IMU holder for MoCap 3D Print Model

    IMU holder for MoCap 3D Print Model

    IMU types: mpu 6050-9150 / MMA845X / MAX21100.

  • Motorised Marble Machine-switch seat 3D Print Model

    Motorised Marble Machine-switch seat 3D Print Model

    Summary
    For my switch size.
    Print Settings
    Printer:
    INFINITY X1 Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    10%
    Post-Printing

  • Prusa I3 MK2 Logitech C920 Mount 3D Print Model

    Prusa I3 MK2 Logitech C920 Mount 3D Print Model

    Summary
    Logitech C920 Mount for Original Prusa I3 MK2 / MK2S
    Its a little modification from (https://www.thingiverse.com/thing:2283508) for mount the Logitech C920.
    Required unmount the webcam for replace the standard support for this.
    The result it’s amazing in terms of stability.
    Demo: https://www.youtube.com/watch?v=RylwI2aTmnQ
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    Doesn’t Matter Supports:
    Yes Resolution:
    0.2 Infill:
    50% Notes:
    It is recommended to use ABS for the heat of the bed

  • Pivot Ball Lock-01 3D Print Model

    Pivot Ball Lock-01 3D Print Model

    Summary
    I wanted to have a go at making a “one print” design of a pivoting ball locking device. Here’s what I ended up with. I tapped the holes with a 1/4-20 tap. Use the obvious orientation when printing. I haven’t tried to correct that issue yet. May need to be scaled depending on which slicer is used. I use Simplify3d.
    I may make more versions at some point.
    Print Settings
    Printer:
    Alunar A8 Rafts:
    No Supports:
    No Resolution:
    0.2mm Infill:
    10%

  • Be Quiet Dark Rock Pro front fan shroud 3D Print Model

    Be Quiet Dark Rock Pro front fan shroud 3D Print Model

    Summary
    A shroud to fit on a Dark Rock Pro cooler. Does require the original fan to be cut and pressed into the shroud.

  • Newest Qidi Tech 1 Bed Leveler 3D Print Model

    Newest Qidi Tech 1 Bed Leveler 3D Print Model

    Summary
    For use with a 10mm or smaller shaft dial indicator on the newest release of the Qidi Tech 1 printer with 8mm rods and 78mm outside to outside spacing. M-6 screws and nuts for the pinch bolts. Included some shims if you need to space your dial indicator up and away from the block.

  • Rocket 3D Print Model

    Rocket 3D Print Model

    Small toy, for big or young. The biggest effect on a desktop!

  • DUALSHOCK Controller PlayStation 4 3D Print Model

    DUALSHOCK Controller PlayStation 4 3D Print Model

    PlayStation 4 controller support nice.
    Study by Finite Elements (engineering method to optimize rigidity) to ensure maximum rigidity (supports a weight of 2kg and a drop of 1m high with impact at the most fragile point). Support removable by hand.
    The STL plan corresponding to the black support (you can debb the base without any problem that I did not do on my black support and which is visible in the photo).
    Support with cable passage for recharging on its support and suitable for a handle equipped with an additional battery

  • Wall key ring 3D Print Model

    Wall key ring 3D Print Model

    This is a wall key ring. You can hang 3 keychains there. It does not have holes for the screws as this would require users to use specific screws.

  • BEAM 3D printable Typeface 3D Print Model

    BEAM 3D printable Typeface 3D Print Model

    BEAM is a 3D typeface designed to be downloaded and created in which ever way the user sees fit. With technology such as 3D printing and CAM the application of BEAM is endless.
    The letter forms can be edited to the users liking, they can be scaled and skewed with in most 3D printing software. Using different materials and colours Beam can be customised to the desired users preference.
    BEAM can be printed in a variety of different materials. PLA and ABS may be the most common 3D printing filaments but explore using Flexi-PLA or Trans-PLA to obtain a variety of results.
    Please be sure to share your results with me. I would like to see what the possibilities of the typeface are and the variety of results which can be obtained.

  • Snug Arduino Uno case – remixed 3D Print Model

    Snug Arduino Uno case – remixed 3D Print Model

    Summary
    Re-mixed this nice design for a workshop. We are using different types of Arduino clones. This remix will hopfully by the one that all can use. If not, then we will redesign it some more.
    Print Settings
    Printer:
    Go-Make Rafts:
    No Supports:
    No Resolution:
    0.16 mm Infill:
    40%

  • delta legs x y z 3D Print Model

    delta legs x y z 3D Print Model

    Summary
    It’s to remember what tower is what X Y Z
    and Feet to X Y Z legs

  • Dyson narrow vacuum tool 3D Print Model

    Dyson narrow vacuum tool 3D Print Model

    Summary
    Narrow vacuum cleaner tool for Dyson DC 37
    Part length = 205mm
    Nozzle length = 140mm
    Nozzle width = 12mm
    Print Settings
    Printer:
    Tevo Terantula Rafts:
    Yes Supports:
    Doesn’t Matter Resolution:
    0.23mm Infill:
    20%

  • einfache Box rund 3D Print Model

    einfache Box rund 3D Print Model

    Summary
    Einfache runde Box / Dose.

  • Rhino miniature 3D Model

    Rhino miniature 3D Model

    Rhino character figurine———————-Screenshots are for preview purposes only. Print doesn’t include any materials or textures.The figurine is hollowed at the bottom.Original dimensions: 50x78x100 mm.

  • Original ring 3D Model

    Original ring 3D Model

    design by Eloyan

  • Pololu USB AVR Programmer V2 Box 3D Model

    Pololu USB AVR Programmer V2 Box 3D Model

    This is a box for Pololu USB AVR Programmer V2

  • Coffee guide 3D Model

    Coffee guide 3D Model

    This is a coffee quide funnel that helps when inserting coffee into the handle of the coffee machine.

  • Fan case for Tronxy 3D printer power supply 60 mm fan 3D Model

    Fan case for Tronxy 3D printer power supply 60 mm fan 3D Model

    This is a fan case for a Tronxy P802M 3D printer power supply.

  • Fan cooler for Melzi board 40mm fan 3D Model

    Fan cooler for Melzi board 40mm fan 3D Model

    This is a cooler for a Melzi board with two 40mm fans. It is designed to leave space for the wires coming from the board.

  • Propeller for hair dryer 3D Model

    Propeller for hair dryer 3D Model

    This is a replacement of a propeller for a hair dryer.

  • Small paddle for narrow jars 3D Model

    Small paddle for narrow jars 3D Model

    This is a paddle for inserting spices into small narrow jars.

  • Stand for Parkside PFBS 108 A1 and other mini grinders 3D Model

    Stand for Parkside PFBS 108 A1 and other mini grinders 3D Model

    This is a stand for Parkside multi – grinder (PFBS 10,8 A1). Other brands and models may also fit in it. Use four M4 bolts and nuts to attach the brackets to the stand.

  • Strong cable clip 3D Model

    Strong cable clip 3D Model

    This is a model of a cable clip.

  • T door holder receiver for a trailer door 3D Print Model

    T door holder receiver for a trailer door 3D Print Model

    Summary
    The receiver part of a t style holder on a trailer.
    My first creation. Hopefully someone can find it useful.
    Print Settings
    Printer Brand:
    FlashForge Printer:
    Creator Pro Rafts:
    No Supports:
    Yes Resolution:
    0.2 Infill:
    100

  • Key Fob 3D Print Model

    Key Fob 3D Print Model

    Summary
    Custom Key Fob!! Smooth edges and simple design. Comment If you want a different letter or word on the Key Fob and I will try to add it for you!!

  • 210 quadcopter frame antenna mount 3D Print Model

    210 quadcopter frame antenna mount 3D Print Model

    Summary
    Broke antenna twice today on my 210 quad, once clipped the branch which bent the antenna into the prop, destroying antenna tube, and second time flew into the power line and this time antenna got cut off completely.
    So this propmted me to design antenna mount which will be on top of the frame under the top plate, and wold clear the propellers. Printed in PLA had to widen holes fraction of mm, with ABS works as is. Printed in resolution 0.8 No supports. In Spmplify3D lower the part until it’s flush with print bed, or trim the excess on the bottom in Tinkercad if your slicer cannot lower the part into build plate.

  • Kawasaki KLR 650 H7 led adapter 3D Print Model

    Kawasaki KLR 650 H7 led adapter 3D Print Model

    Summary
    This adapter is to fit cheap H7 led heahlight on the KLR.
    Print on ABS/PETG or PC for temp tolerance.
    How to use:
    Print it
    Remove the headlight cowling from the KLR (the 2 phillips and the 4 M6 bolts).
    Disconnect the headlight and turn signals
    Remove the light cover
    Raise the light lock
    Remove the old light bulb
    Put the adapter with the widthest part to the front. There is only 1 way to put there.
    Lock the adapter in the right location
    Remove the OEM adapter from your led bulb
    Put the led into the adapter. Be carefull that led bulb have 2 marks, one is bigger.
    Once enter, turn the led bulb in clockwise direction until stop it.
    You could need to cut the cover in order to fit the led heat sink.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    Yes Resolution:
    200um Infill:
    20% Notes:
    I use 6 layers as perimeter/border shell

  • Mickey 510 RTA stand 3D Print Model

    Mickey 510 RTA stand 3D Print Model

    Summary
    A 510 holder to store tanks or rda, Rdta, rta. Mickey themed very simple but my first design. Make sure to lay it flat when printing with hole on top. I am using cura 2.4 to slice
    Print Settings
    Printer:
    Monoprice maker select mini v2 Rafts:
    No Supports:
    No Infill:
    50%

  • Iron Man Mk 46 Helmet 3D Print Model

    Iron Man Mk 46 Helmet 3D Print Model

    This 3d model i 99% accurat to the mk 46 helmet in Civil War, it was created from orthographics screen grabs of the CGI model used in the movie.

  • 3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • 3D Jewelry CAD File Wedding Bridal Ring Set 3D Print Model

    3D Jewelry CAD File Wedding Bridal Ring Set 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • 3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • 2-color 3D printer 3D Print Model

    2-color 3D printer 3D Print Model

    3D printer with 2-color 2-color print head or E3DV6

  • PLP SMOKING 3D Print Model

    PLP SMOKING 3D Print Model

    Costume tuxedo.
    (Waiting to be able to possess a real !!!)

  • Cubo 3×3 3D Print Model

    Summary
    Cubo de rubik 3×3

  • Led Strip Mount for 7.6mm wide strips 3D Print Model

    Led Strip Mount for 7.6mm wide strips 3D Print Model

    Summary
    For use with 7.6mm wide LED strips the type you find inexpensively that often come with a USB connector wired to the end. Remix with mounting screws on ends. 220mm length.

  • Nema 17 Fan Mount 3D Print Model

    Nema 17 Fan Mount 3D Print Model

    Summary
    This remix of ChrisMagno’s design was made so the fan could be assembled on the side of the motor in conjunction with beamtech’s Nema 17 mount (https://www.thingiverse.com/thing:1540632). It should also work standalone or with other mounts.

  • Flange that accepts pool cleaner hose. 3D Print Model

    Summary
    A simple flange with a 41mm inner diameter. Can be bolted to a tank.
    Print Settings
    Printer:
    XYZPrintingDa Vinci JR. 1.0 Rafts:
    No Supports:
    No Resolution:
    Doesn’t matter. Infill:
    Did mine at 50% no problems.

  • 3D Printer Torture Test 3D Print Model

    3D Printer Torture Test 3D Print Model

    3D Printer Torture Test

  • Lamp pot of jam 3D Print Model

    Lamp pot of jam 3D Print Model

    Here is a lamp made from an LED bulb (E27) and a jar of jam. A classic 3D printing!

  • M.Terk Drip Tip 3D Print Model

    M.Terk Drip Tip 3D Print Model

    Summary
    I designed this drip tip to work with my M.Terk RDA on a Vaping American Made Rig Mod v3. It fits loosely without the oring, comfortably snug with an oring. The internal shape is tapered/conical to add a bit of restriction to the flow of air (strictly preference).
    A single oring is used to help keep it tight/snug. What size works best may vary depending on print quality.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    0.15 mm Infill:
    20% Notes:
    Insert Dimensions: 11mm DIA x 6mm
    Mouthpiece Dimensions: 14mm DIA x 12mm
    Oring Dimensions: 7/16″ DIA x 1/16″ thickness (~11mm DIA x ~1.7mm thickness)
    Print orientation was upside-down (mouthpiece on build plate, insert to the sky). I printed with no supports, but do as you like/require.
    Total print time: ~24 minutes
    Nozzle/Extruder Temperature: 210°C
    Bed Temperature: 55°C
    Material: PLA (Any material would likely work. Print settings may need to be adjusted accordingly)
    Post-Printing
    Finishing
    Flashing trimmed from the build plate layer. Light sanding with 220 grit sandpaper to make a smoother “friendly” edge on the mouthpiece opening.

  • Sea Turtle Pen Holder 3D Print Model

    Sea Turtle Pen Holder 3D Print Model

    Summary
    I included 2 sizes, the big one is 216x210x45mm and the smaller one is 169x174x36mm with 11mm holes in both of them to accommodate regular sized pens/pencils.
    WARNING
    If you scale the model the pen holes will scale and either be too big or too small to hold pens/pencils reliably.
    Enjoy !

  • Makeup Palette 3D Print Model

    Makeup Palette 3D Print Model

    Summary
    A small box with wells in it to store make up from broken palettes, samples, and other small amounts of make up.