Download Free 3D Model Samsung S5 Bracket for Heinkel Tourist Scooter 103 A1 & A2 (Windshield mount) 3D Print Model

Summary
I needed a way to hold my GPS when riding with my old Heinkel Tourist Scooter 103 A1.
I used the holder from here:https://www.thingiverse.com/thing:1114561 (Thanks For Sharing!) It’s a nice design, lightweight, yet sturdy.
I then designed an adapter for the windshield-holder on the scooter, to adapt to the S5 holder created by Sonmor.
I added the famous Heinkel logo on it. (just for show)
-Additionnel Parts-list-
You will need the following to assemble the whole thing:
2x M3 (16mm)
4x M3 Washers
2x M3 Bolts
2x M10 (40mm)
4x M10 Washers
2x M10 Bolts
-PrintStuff-
No need for supports, they are included.
PartII needs to be rotated so that the cylindres touch the buildplate.
Tested print on Prusa MKII.
-Material-
I advise to print in ABS as it’s sturdier, and UV-resistant. (NoFan, preferably a small brim to avoid warping of ABS)
-Assembly-
Remove supports from PartII. (they break off when twisting’em)
First assemble PartII and PartIII with the small M3 bolt’n screws.
Then use M10 bolt’n screws to attach to the windshield bracket.
Now clip the Samsung Galaxy S5 holder on it.
-Additional Idea-
I made an USB cable going from battery (with power adapter) to the underside of the handlebars .. so I don’t drain the S5 battery.
-Usage-
I put 4 small foam pieces in each corner of the bottom of the Samsung S5 holder, to keep the phone from shaking too much (oldtimer=vibrations), and avoid the risk of jumping out of the holder whiles driving.
That’s it.
I can only say how gratefull I am that people share stuff so others can change it. So if you’re keen to that principle, don’t go making money on what people share for free !
-enjoy-